How to display two waveforms in one waveform chart?

hellow!anyone can tell me how to display two waveform together in one waveform chart? thanks!

Hello,
An easy way to tell how to make multi-plot charts and graphs is to hold your mouse over the chart/graph terminal on the block diagram and make sure Context Help (Help >> Show Context Help) is enabled. This screen will tell you how to connect the indicator for a multiple-plot display.
You might want to take a look at my attached screenshots of a working multi-plot chart.
Hope this helps!
Liz F
National Instruments
Attachments:
Multi-plot_chart.bmp ‏902 KB

Similar Messages

Display Two Report IN ONE

hi Expert,
how to display two report in one please help me .
Regards,
Hamad

Hi,
Refer the sample code:
CLEAR w_event.
w_event-name = slis_ev_top_of_page.
w_event-form = 'TOP_OF_PAGE'.
APPEND w_event TO i_events1.
CLEAR w_event.
w_event-name = slis_ev_top_of_page.
w_event-form = 'XTOP_OF_PAGE'.
APPEND w_event TO i_events2.
DATA: lv_repid LIKE sy-repid.
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = lv_repid
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'PF_STATUS'.
*-- Vendor Schedule List
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
it_fieldcat = i_field_cat1
is_layout = w_lay_out1
i_tabname = '<I_TABLE>'
it_events = i_events1
TABLES
t_outtab =<b> <i_table>.</b> Data for Report 1
*-- Error Lsit display
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
it_fieldcat = i_field_cat2
is_layout = w_lay_out2
i_tabname ='I_ERROR'
it_events = i_events2
TABLES
t_outtab = <b>i_error[].</b> - Data for report 2
w_print-reserve_lines = 2.
w_print-no_print_listinfos = c_x.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
is_print = w_print.
ENDFORM. " f0504_create_list
*-- Top of Page
FORM top_of_page.
WRITE: sy-title.
ENDFORM.
FORM xtop_of_page *
FORM xtop_of_page.
WRITE: 'Error Records'.
ENDFORM.
Reward points if this Helps.
Manish

How to display Two frames in HTML....

Hi,
Can someone please advice me on how to display two frams on one page without using FrameSet...
Thanks,

Hi,
Thank you for your reply...
I already have something that i did in Applet but i don't want to use Applet....
The problem with frameset is that i will be adding documents Types Dynamically in HTML List and after clicking the Document Type I want to display Image depending on what Document Type is clicked...
Both the DOCUMENT TYPE and IMAGE, I want to create DYnamically. I don't want to create Two HTML Files (one for Image and One for LIST) and then open it from Another HTML Which contains FrameSets...
I hope you get my point....
Is there any other ways i can do this....
Any help will be greatly appreciated...

How to Display Two Months in Sharepoint Calendar

1. I have SharePoint Server. Do I need other software to the make the following change in Calendar?
2. How to hide Saturday and Sunday or move Sunday to the first day. (Sunday is the last day in my current calendar. )
3. How to display two months on one page?
Thanks.

Hello,
For those still looking, you should ask on the
SharePoint forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Hao to display two lines in one Graph

Hi, I want to display two lines in one graph in different color , what should I do? Thanks.

Hello Carlos,
the help window for a waveform graph/chart only mentions "single plot
with waveform datatype". To get more plots on one graph you have to
build an 2D-array of points. Just look at the help window!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

OBIEE - answers - How to display to rows in one?

I have problem with QA_RESULTS table - exactly with correct display results
How can I display two rows in one?
Example:
data 1, name
2009-03-01, john
2009-03-05, john
2009-03-02, ann
2009-03-04, ann
I would like to see:
data 1, name , data 2
2009-03-01, john , 2003-03-05
2009-03-02, ann , 2009-03-04
Regards,
js

hi..
i don't think this can be done..
but try to put the name column in first place and in column properties mention suppression values.. as it won't repeat the values for each row...
keep your date column in second position.
so that it appears like.. for each name there would be 2 dates up and down
just try...

How to display two grids in same screen using SALV Method

Hi Freinds,
Please let me know how to display two grids in same screen using SALV Method.
Thank you
Regards,
SDV

Using the same concept as described in How to dispaly Three Internal Table Data (One below another) in ALV OOPS .
All you need to add is passing your new containers as r_container parementer of factory method.
"1st one
      cl_salv_table=>factory(
         EXPORTING
           R_CONTAINER    = g_top_container
"2nd one
      cl_salv_table=>factory(
         EXPORTING
           R_CONTAINER    = g_bottom_container
Regards
Marcin

How to put two ipods on one computer

how to put two ipods on one computer

Set up the second exactly the same way as you set up the first. If iTunes is already installed, it doesn't need to be installed again.
(64746)

How to sync two IPhone with one PC , but with different applications

How to sync two IPhone with one PC , but with different applications ?
We have two IPhones , but one PC , we want to sync separately , is that possible ?

Absolutely, connect each phone, select what content you want on each phone, then hit the sync button. iTunes will keep everything straight, by device, upon subsequent syncs, including separate backups.

How to display all data on one page in web app

Hello.
So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
<bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
So how to display this data on one page if its impossible how to torn on pagination.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

How to set two radius servers one is window NPS another is cisco radius server

how to set two radius servers one is window NPS another is cisco radius server
when i try the following command, once window priority is first , i type cisco radius user name, it authenticated fail
i can not use both at the same time
radius-server host 192.168.1.3 is window NPS
radius-server host 192.168.1.1 is cisco radius
http://blog.skufel.net/2012/06/how-to-integrating-cisco-devices-access-with-microsoft-npsradius/
conf t
no aaa authentication login default line
no aaa authentication login local group radius
no aaa authorization exec default group radius if-authenticated
no aaa authorization network default group radius
no aaa accounting connection default start-stop group radius
aaa new-model
aaa group server radius IAS
server 192.168.1.1 auth-port 1812 acct-port 1813
server 192.168.1.3 auth-port 1812 acct-port 1813
aaa authentication login userAuthentication local group IAS
aaa authorization exec userAuthorization local group IAS if-authenticated
aaa authorization network userAuthorization local group IAS
aaa accounting exec default start-stop group IAS
aaa accounting system default start-stop group IAS
aaa session-id common
radius-server host 192.168.1.1 auth-port 1812 acct-port 1813
radius-server host 192.168.1.2 auth-port 1812 acct-port 1813
radius-server host 192.168.1.3 auth-port 1645 acct-port 1646
radius-server host 192.168.1.3 auth-port 1812 acct-port 1813
privilege exec level 1 show config
ip radius source-interface Gi0/1
line vty 0 4
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
line vty 5 15
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
end
conf t
aaa group server radius IAS
server 192.168.1.3 auth-port 1812 acct-port 1813
server 192.168.1.1 auth-port 1812 acct-port 1813
end

The first AAA server listed in your config will always be used unless/until it becomes unavailable. At that point the NAD would move down to the next AAA server defined on the list and use that one until it becomes unavailable and then move to third one, and so on.
If you want to use two AAA servers at the same time then you will need to put a load balancer in front of them. Then the virtual IP (vip) will be listed in the NADs vs the individual AAA servers' IPs.
I hope this helps!
Thank you for rating helpful posts!

How can update two rows in one query?

How can update two rows in one query?
Edited by: OracleM on May 4, 2009 12:16 AM

What do you mean with "two rows"? May be two columns??
If the where clause of UPDATE query matches two rows, then it will update two rows. If you want to update two columns, then add column names to your query
UPDATE your_table SET col1=value1, col2=value2 WHERE your_where_clause- - - - - - - - - - - - - - - - - - - - -
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to display two different hierarchical sequential lists in one o/p scree

Hi Gurus,
I have a requirement for displaying two hierarchical lists in one output screen. I have created my hierarchical sequential lists using
function module : - 'REUSE_ALV_HIERSEQ_LIST_DISPLAY', but i dont know how to append my second hierarchical sequential list
into this.
Will it be easily possible through OO ABAP where i will have two containers at the screen and each container will display one hierarchical sequential list at the output screen. But i have no idea how to do this through OO ABAP.
Please help...
Thanks,
Bhupender

i want to display the records corresponding to the user details enterd
in Text Fields in the same Frame by replacintg the previous display..1) Quit multi-posting.
2) You where given an answer in your last posting on the topic.
3) The code isn't formatted so don't expect us to read the code.

How to combine multiple signals to one waveform plot in labview

hi everyone, im using labview 2011 and i need to take four different signals and plot them individual in one waveform chart and THEN i need to combine all four signals and plot the resultant in the SAME waveform chart as the four original ones. i have the four signals plotted but can not for the life of me figure out the resultant one. any ideas? thanks!

The word "combine" can have many meanings. Do you want to sum them, average them, concatenate them, or something else...
LabVIEW Champion . Do more with less code and in less time .

How to display two different parts of one image in two windows?

hi everyone:) i need to display two different parts of one image in two windows. i have problem with displaying :/ because after creating windows there aren't any images :( i supose my initialization code of creating windows is incomplete, maybe i miss something or maybe there is some inconistency. graphics in java is not my strong position. complete code is below. can anybody help me?
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import javax.swing.*;
import java.util.*;
class ImgFrame extends JFrame
       private BufferedImage img;
       ImgFrame(BufferedImage B_Img, int x, int y, int w, int h)
               super("d");
               img=new BufferedImage(w,h,BufferedImage.TYPE_INT_RGB);
               img=B_Img.getSubimage(x, y, w, h);
       }//end ImgFrame construction
       public void paint(Graphics g)
               Graphics2D g2D = (Graphics2D)g;
               g.drawImage(img, 8, 8, null);
       }//end paint method
       public Dimension getPrefferedSize()
               if(img==null)
                       return(new Dimension(100,100));
               else
                       return(new Dimension(img.getWidth(null),img.getHeight(null)));
       }//end of GetPrefferedSize method
}//end ImgFrame class
public class TestGraph2D_03 extends Component
       static BufferedImage IMG;
       public static void Load()
               try
                       IMG=ImageIO.read(new File("c:/test.bmp"));
               catch(IOException ioe)
                       System.out.println("an exception: "+ioe);
               }//end try catch
       }//end TestGraph2D_03 construction
       public static void main(String[] args)
               Load();
               ImgFrame F1 = new ImgFrame(IMG, 0, 0, 8, 8);
               ImgFrame F2 = new ImgFrame(IMG, 8, 8, 8, 8);
               F1.addWindowListener(new WindowAdapter()
                       public void windowClosing(WindowEvent e)
                               System.exit(0);
               F1.pack();
               F1.setVisible(true);
               F2.addWindowListener(new WindowAdapter()
                       public void windowClosing(WindowEvent e)
                               System.exit(0);
               F2.pack();
               F2.setVisible(true);
       }//end of main method in TestGraph2D_01 class
}//end of TestGraph2D_03 class

Never override the paint(...) method of a Swing component.
If you have a sub image then add the image to a JLabel and add the label to the GUI. No need for custom painting.

How to display two waveforms in one waveform chart?

Similar Messages

Maybe you are looking for