How to display utf-8 coding chinese characters in code editor of a English version dreamweaver

hi, i am trying to insert some chinese words in my html script,( English win7 and English dreamweaver Cs6), no matter what coding I chose, the characters can not display in coding eidtor,but they showed well in live and desing. why? Do I have to use a Chinse version dreamweaver to see these characters? or I can modify some settings to see them.
I apprecaite if somebody help me slove this problem.

It should not be a problem as in

Similar Messages

Mobile network symbol displays Chinese characters whilst in China instead of English

The network carrier symbol in the status area displays in Chinese characters instead of English whilst travelling in China so that I have to go to the settings to see which carrier is selected. The phone is set to English in the region format and I have never had this on my previous Blackberry. Is it a setting or a firmware issue?

Yup, only if your iOS device is set to English. Then yes, good Pinyin (and even some English!) shows up. I guess my only complaint now (in English) is that you really have to zoom in to see the smaller streets compared to how Google Maps showed them.
The Hanzi is still an issue, though, in at least some other languages. I prefer English but some others in my household prefer Spanish, and when the language is set to Spanish, Hanzi shows up everywhere.

How to display and type in Chinese on BB bold 9000?

Hey, I'm a new user of BB bold 9000. Just bought the phone from the states, which was distributed by AT&T and it is unlocked.
I have tried couple times by following this post:
http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8300/Chinese-Character/m-p/35515?...
In the aforesiad post, instrucation was given as:
install Desktop Manager without Media Manager on your PC
install the handheld software 4.5.0.174 on your PC (it will install inside the Desktop Manager)
seaarch for a file called vendor.xml and rename it to vendor.xml.toto or anything else
plug your BlackBerry device to the PC, and launch the Desktop Manager
in the application section, you can see the OS of 2) and install it to your BlackBerry device."
Basically what I did was to install Desktop Manager without Media Manager (5.0) version on my PC and installed the handheld software 4.6
I noticed that there's no Chinese language selection (basically no Asian languages) and I then tried 4.6 Desktop Manager which still didn't work.
Also, I am not able to find the "vender.xml", wondering if this has any impact on the application.
What should I install to display and type in Chinese? Any inputs will be appreciated!
Thanks

Hey josejr,
Welcome to the BlackBerry Support Community Forums.
To install the East Asia language pack, please perform the following steps:
1. Go to http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Choose your Carrier (AT&T)
3. Then proceed with selecting the BlackBerry Bold 9000 and select Next.
4. You will download the device software "BlackBerry Handheld Software v4.6.0.519 (EastAsia)".
5. Once this software is downloaded, please install on your PC.
After the device software has been successfully installed, please following the following steps in this knowledge base article.
http://www.blackberry.com/btsc/KB17208
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How to Enter Chinese Characters in VI Editor through telnet ?

Is there any special setup involve? I am new to Chinese settings. Any help is very much appreciated. Thanks.

Hello.
Normal telnet does not support chinese characters - independent of the program used.
Martin

How to generate reports 10g in chinese characters pdf/html (10g)

Hi,
we have installed Oracle AS 10g (9.0.4.1) on an windows 2000 server.
The nls_lang=American_america.UTF8
the database server 10g with characterset utf8
The chinese font used is the simsun (simsun.ttf) semplified chinese.
We have no problem with the forms and the database (we have prompt in chinese and we store data in chinese and we view the forms with the jnitiator.
Our problem are the reports: we can't view chinese characters in pdf reports or html
We have readen a lot of topics (very confused..) and we have tryed a lot of solutions but without success.
In particolar, the last:
in the uifont.ali under the pdf subset section we have mapped the simsun font with the file arialuni.ttf
simsun="arialuni.ttf"
We have installed the arial unicode ms (arialuni.ttf) on the server and also on the client.
we have put the file arialuni.ttf also in a directory of the report path.
But it doesn't work.
What can we do ?
Regards

I agree with Phillip. Looks li ke you've got everything else setup properly, but you should use a Unicode font in your report instead of simsun. If you really want to use Simsun, then change your report server NLS parameter to use something like NLS_LANG=SIMPLIFIED CHINESE_CHINA.ZHS16GBK or even NLS_LANG=AMERICAN_AMERICA.ZHS16GBK, and remove the reference to arialuni.ttf. By making your report server use UTF8, it requires that you use a Unicode font. If you change your NLS to a Chinese character set, sqlnet will do the conversion for you automatically and transparently, and you can use simsun
The subset feature is what allows you to see the PDF properly on machines that don't already have the font installed. If your target users are internal and you can control them, or external and all likely to have the font already, you don't need the subsetting at all.

A850+ with chinese characters on phone app despite UK English setting

Have just received a new 850+ running Android 4.2.2 and firmware A850+_S118_140226
Pretty much all the apps show English except the inbuilt phone app which is mixed English/Chinese. For example, under an incoming number are Chinese characters. I've no ide what these mean but presumably if it was in English it might be useful!
Any tips as to how I can fix this?
Thanks

Just found th esolution to this on XDA forum here:
http://forum.xda-developers.com/lenovo-a850/help/a850-unknown-city-chinese-characters-t2811907
Apparently it's a setting in the Contacts manager to do with location. Solves a problem of Chinese characters in Contacts and Phone. Bizarre.

How to add a font for use by the code editor

Version 3.0.04 windows
found Preferences -> Code Editor -> Fonts
Did not see the font I would like to use in the list. The font is terminal. The font can be displayed in Control Panel -> fonts in windows.
In the help I found Edit Font Location but could not find the dialog box described in the help
Is there a procedure to add the font so SQL Dev can use it?
Thanks

Hi Dag,
Apparently editing Font Location in 3.0 applies only to ...
Tools | Preferences | Database | Export/View DDL Options | PDF Format
Regards,
Gary

How to display UTF - 8 when genereate excel from java

I use Jsp to input chinese words as UTF-8, and store them to Oracle. When I display these words in Jsp, there is nothing wrong. But if I generate Excel through servlet, these words display as "???e????", how can I resolve this problem?
Thank you!!!

What library are you using to generate xls files? Then find that library's support fora.

How to display, translate or remove html characters

Hi,
I need the ability to translate or remove the characters below to display properly in oracle apex text area. Anyone know how to do this?
Apex 4
1985 World Champ. U.19 - Gold, 1986 World Champ. - Gold, 1987 Pan American Games - Gold, 1987 North American Champ. - Gold, 1987 World Cup - Gold, 1989 World Champ. - Gold, 1990 Goodwill Games - Gold, 1990 World Cup - Gold, 1991 Playa Giron - Gold, 1991 Pan American Games - Gold, 1991 World Champ. -
Thanks
Dean

Assuming I've understood the requirement:
SQL> with t as (
2 select '1985 World Champ. U.19 - Gold, 1986 World Champ. - Gold, 1987 Pan American Games - Gold, 1987 North American Champ. - Gold, 1987 World Cup - Gold, 1989 World Champ. - Gold, 1990 Goodwill Games - Gold, 1990 World Cup - Gold, 1991 Playa Giron - Gold, 199
1 Pan American Games - Gold, 1991 World Champ. - ' s from dual)
3 select
4 regexp_replace(s, '<[^>]*>') removed
5 , htf.escape_sc(s) escaped
6 from
7* t
SQL> /
REMOVED ESCAPED
1985 World Champ. U.19 - Gold, 1986 Worl 1985 World Champ. U.19 - Gold,
d Champ. - Gold, 1987 Pan American Games 1986 World
ld, 1987 World Cup - Gold, 1989 World Ch Champ. - Gold, </span&
amp. - Gold, 1990 Goodwill Games - Gold, gt;1987 Pan American Games - Gold, 1987
1990 World Cup - Gold, 1991 Playa Giron North American Champ. - Gold, 1987 World
- Gold, 1991 Pan American Games - Gold, Cup - Gold, <strong&g
 t;1989 World Champ. - Gold,</strong&g
 t; 1990 Goodwill Games - Go
 ld, 1990 World Cup - Gold, 1991 Playa Gi
 ron - Gold, 1991 Pan American Games - Go
 ld, 1991 Wo
 rld Champ. -(Inconsistent behaviour by the Jive forum software means it isn't displaying the difference in the ESCAPED result properly...)

How to display only specified length of characters in text control

Hi,
I am using text control in swf file. In this file, i want the display text upto 15 charaters and if more, then present with [.....]
Please provide solution for this.

Here ya go For 15 character limit...
<mx:Label text="{(textInputA.text.length > 15)?textInputA.text.substr(0,15)+'[...]':textInputA.text}"/>
This uses textInputA as a textInput box that someone can type into. The result is that in the Text/Label component, it checks the length of the value of textInputA and if it's longer than 15 characters, it trims any characters beyond 15 and adds [...] to the end.
You can substitute other things instead of a textInput control, but I used it here as it's the easiest way to explain.
Let me know if this helps you

How to display changes of inspection plan via t-code :CBWQM ?

Dear all,
We are using ECM for inspection plan updating, Is it possible to see changes in detail like QP60,QP61 via T-code : CBWQM ?
Regards,

QP61 Display change documents insp.plan?

How to display adobe ver. 10 toolbar in mozilla permenent like in older versions?

In the past if I used adobe reader 8 or 9 the adobe toolbar would always show in Mozilla when I open a PDF. It seems with adobe 10 the adobe toolbar is not displayed on the top of the page it has a toolbar at the bottom that hides and can be put on the top of the page only when you have it open at that time

Try hitting '''F8''' when you are viewing a PDF in a Firefox tab / window, that toggles that Adobe toolbar on & off.
If that solves your problem ,please click the '''Solved It''' button next to this answer, so this thread gets marked as '''Solved''' to help other users who may have this same problem.

Problems in displaying chinese characters with utf-8 encoding

Hi,
I got problem in displaying chinese characters in my web application.
I am creating a web application supporting both English and Chinese charaters. What I am trying to do is:
1. storing some chinese characters via a web page (page1) into database.
2. retrieve the chinese characters via another web page (page2) from the database.
Once I put the Chinese characters on the webpage (page1 in step #1), it displayes well (the readable chinese characters) before I submit this page (after submit, the data will be stored into the database).
But when I tried to display the chiese characters via page2 in step#2, I got un-readable characters displayed.
The running configuration is: Sun Application Server (coming and with the JSC2) and MySQL server 5.0. And I setup the database server with utf8 as character-set.
It seems like the chinese characters got messed up throught the round-trip (from page1<----via jdbc---->database<----via jdbc------>page2).
From the database, I found the chinese characters are there. Any helps are appreciated.

Hi,
I am trying to insert new record.The record may contain chineese or English data.
I did same what u specified.
first I converted to the byte UTF8.again,I converted byte to string using 8859_1.
the values are not storing chinese characters.
pls suggest me.
below is my code.
 ascCode = req.getParameter("asccode");
 countryCode = req.getParameter("countrycode");
 ascName = req.getParameter("ascname");
 address1 = req.getParameter("ascaddress1");
 address2 = req.getParameter("ascaddress2");
 System.out.println("ASC NAME:"+ascName);
 System.out.println("ADDRESS1:"+address1);
 System.out.println("ADDRESS2:"+address2);
 ascC = ascCode.getBytes("UTF8");
 coun = countryCode.getBytes("UTF8");
 ascN = ascName.getBytes("UTF8");
 add1 = address1.getBytes("UTF8");
 add2 = address2.getBytes("UTF8");
 System.out.println("ASC NAME:"+ascN);
 System.out.println("ADDRESS1:"+add1);
 System.out.println("ADDRESS2:"+add2);
 ascCode = new String(ascC,"8859_1");
 countryCode= new String(coun,"8859_1");
 ascName = new String(ascN,"8859_1");
 address1 = new String(add1,"8859_1");
 address2 = new String(add2,"8859_1");
 System.out.println("ASC NAME:"+ascName);
 System.out.println("ADDRESS1:"+address1);
 System.out.println("ADDRESS2:"+address2);
thanks.

Chinese Data Fields not displaying Chinese Characters

Hi There,
Wonder if someone can help. We are currently running reports in Crystal 8.5 but are in the process of upgrading our business systems to latest version and this includes converting all our Crystal 8.5 reports to Crystal Reports XI R2 SP4.
During the process we are experiencing some difficulties in displaying Chinese characters, which have previously worked fine in version 8.5. The system we are running Crystal from has Oracle client 11 installed and the OS system locale is set to Chinese PRC. Our application is displaying Chinese characters properly and if we have any text fields on the report, these are also displaying properly when changing Font to Arial Unicode MS. The only thing that doesn't display properly is the field data which after checking has the correct Chinese data stored in the database. For some reason Crystal 11.5 doesn't seem to be transferring the data correctly which points to some sort of encoding problem.
Is there something I am missing here or is there something else I need to install for this to work?
Any hep would be appreciated.

What is your Oracle database's language set? Is it set to UTF-8 or non UTF-8 (such as American_America.WE8ISO8859P1" )?
There is a similar issue tracked under ID ADAPT00528561 (Crystal cannot display non-UTF-8 Chinese characters from an Oracle database ) and has been fixed and you should set the following registry key to make it effective:
Set the following registry key "UseOSLocaleForConversion" to "Yes" under:
HKEY_LOCAL_MACHINE\Software\Business Objects\Suite 11.5\Crystal Reports\Database\Oracle

New retina iPad displaying Chinese characters

My out of the box retina display iPad is showing Chinese characters even though I set the language to English under International in Settings. How do I fix this?

Is English still shown as the selected language in Settings > General > International > Language ?
Changing the language when you can't read it : http://support.apple.com/kb/HT4051

How to display utf-8 coding chinese characters in code editor of a English version dreamweaver

Similar Messages

Maybe you are looking for