How to display vendor and customer name in Bank Ledger

Hi Experts,
In bank ledgers we want the display of G/L code and customer and vendors name . Is that possible? If so how to configure in SAP.
Om

Hello Om,
You can get vendor/costumer number and their names in FBL3N when you get bank ledger's line item.
You must use BTE functions.
I don't your techinal skills about SAP but if you don't know ABAP or ABAP dictionary details, you can get help your ABAPer.
I will explain step by step.
First of all, if you don't use BTE before, You must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product : ZFI
Text : BTE Products for FI Exit
Product active : tick check fro activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure.
Define 4 fields.
Component : KUNNR - Component type : KUNNR
Component : NAMED - Component type : NAME1
Component : LIFNR - Component type : LINFR
Component : NAMEK - Component type : NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process : 00001650
Function Module : ZFI_INTERFACE_00001650
Product : ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
I hope it helps to you.
Regards,
Burak.

Similar Messages

Display vendors and customer as per account group.

Hello,
How to display the vendors & Customers as Vendor & Customer account group?
is there any table? if any please let me know.
Quick reply will be more appreciated.
Thanks... Have a nice day.

Hi
Table to download
Vendor : LFA1 - KTOKK & T.Code: S_ALR_87012086 - Vendor List ( Give A/C Group in Dynamic Selection Screen)
Customer : KNA1 - KTOKD : T.Code: S_ALR_87012179 - Customer List (Give A/C Group in Dynamic Selection Screen)
Regards,
Viswa
Edited by: viswanatha s on Jan 10, 2011 2:28 PM

Issue with how Mail displays sender and recipient names in message list

Hi everyone!
I've been looking for a solution but had no luck so far.
Here's the issue:
In Mail, the sender email address or the recipient name would sometimes be displayed twice between chevrons.
For example, sometimes in my sent folder, in the "To" column, the recipient name is displayed twice like this <[email protected]> <[email protected]> whereas it used to be displayed once and without chevrons. This happened since i have reinstalled Snow Leopard (clean install).
Hope someone can help.
Thanks!

Henry,
Please post this question on the weblogic.developer.interest.integration
newsgroup.
Regards,
Raj Alagumalai
Backline Workshop Support
"Henry Mugasha" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using a Task Control Factory to create Task Control Instances in aloop
and then
create tasks and assign them to a predefined group. I have an event choice
for two events
waiting for the onTaskCompleted and onTaskAborted event call backs.
I have two such operations (of task creation) in the same loop. For
simplicity I have used two separate task factory controls for each of the
tasks (because I even had worse problems using a single control factoryfor
both tasks in the same loop).
When I instantiate the process, through work list I am able to claim,start
and complete the first task. When I try the same procedure (claim, startand
complete) on the second task, the the event choice for the corresponding
task receives 2 event call backs. First it receives the onTaskCompleted as
expected, but then it also received another call back of the same typewhich
displays the error on the server log as:
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <on process
completion, 1 undelivered messages to
'sampleRequestTaskFactoryCtrl_onTaskCompleted'>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <A message wasunable
to be delivered from a WLW Message Queue. Attempting to deliver the
onAsyncFailure event>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
Does anybody know why two events are fired for the same work list action?
Thanks in advance.
Henry M

How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

X Ltd. will be Vendor & Customer.
Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

If vendor and customer r same how we clear

Hi
if for the claint
both vendor and customer r same
in such a case what configuration is need
and if clearing is required between both
what steps required
i know 1 thing only eg in vendor master give customer number ,that thing only i knew ,
plz explain and give steps

Hi,
If you are purchasing as well as selling to the same party i.e. customer and vendor are same, you can do following.
1) Create Customer Master Data for the Party.
2) Create Vendor Master Data for the same Party.
3) Go to tranaction for Change Customer, go to Control Tab and specify the Vendor No in Vendor field.
4) Go to Payment Transactions tab, select the indicator "Clearing with Vendor".
5) Repeat steps 3 and 4 for Vendor Master data change as well. Specify Customer No in Customer field of Vendor Master and also select the indicatro "Clearing with Customer".
This will help. Pls. assign suitable points.
Regards,
Chirag

Profit centerwise Vendor and Customer line items view

Deal ALL,
We have not activated Business Area.
We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
Request you all to reply.
Thanks & Regards,
Bhadresh

Hi
Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
Assign Points if useful
Regards
Sanil

OBYA : vendor and customer clearing in cross company code transaction

Hi Gurus,
Please can any one telll me how to clear the transactions of cross company code which is in vendor and customer.
I already done a configuration in OBYA for customer - vendor.
Expected a process of clearing the cross company code transaction.
Thanks in Advance
Manish.

Hi,
If you are doing for vendor invoice,
for example:
co code 1000 and co.code2000
Use F-02 and enter following transactions
posting key 31 -vendor- company code 1000
posting key 25- expenses and enter new company code 2000.
After the entry it will display 4 line items, 2line item for 1000&2000
Regards,
Sreekanth

Invoice image in vendor and customer document

Hello,
We have got following requirement.
Currently we are storing pysical invoice copies of vendor and customer in a pysical file. But now we want to see the image of invoices in vendor and customer document respectively.
It means, if it is possible to have an attachment button or some icon available when we see vendor and customer document.
Please advise how can we link the pysical invoice with SAP document. And is this something related to DMS or Archivieng Link.
Please suggest.
Best Regards,
Tapan

Hi Tapan,
At my company we are currently doing just this.
We have a server outside of SAP that stores our images. We did not want to store the images within SAP.
We use the SAP document number to link the image to the SAP document.
We do all our AP input from images. After an invoice is entered, and the document number is generated, we forward the image to a
e mail address for the server using the document number in the subject line. The image gets attached to the document. Then the image can be viewed by clicking on the Services for object icon.
I am sure there is some more techical stuff that goes this, like an RFC connection. I am sorry I am not technical. I am the functionala AP person. We also have a program that takes the image and attaches it to the cross company document if there is one.
Hope this gives you some ideas.
Alicia

Ageing wise vendor and customer report

hi....
Where i can get ageing wise vendor and customer report?
Thanks & Regards
Rekha shrama

Hello
First configure credit management & customise.
A/R Summary
Degree of ageing
You can set the allowed degree of ageing in Customizing for Sales, under Basic Functions ® Credit Management/Risk Management ® Credit Management ® Define Automatic Credit Control.
Under Checks in financial accounting/ old A/R summary, you can enter the permitted degree of ageing for the A/R summary, in the fíelds Permitted days and Permitted hours. Here, you can define how old the A/R summary can be, in order to be called up for a check. If the permitted degree of ageing for the A/R summary is exceeded in the credit check, then the document is blocked.
Fields allowed days and allowed hours are only available for entry if you have entered an X in field Read A/R Summary in Customizing. The path is: Accounts Receivable and Accounts ® Credit Management ® Credit Control Account ® Make basic settings for credit management.
Updating
The A/R summary is either sent periodically (with the help of the report RFCMCRCV) from central Financial Accounting to the decentralized Sales and Distribution units according to ALE distribution model or, if an obsolete A/R summary is presented, updated for the credit check by the system per remote function.
In order that the system is burdened as little as possible, SAP recommends you stick to the following order:
Program run: Incoming payments in central FI
Program run: Distribution A/R summary from central FI to decentralized Sales and Distribution units
Program run: Renewed credit check for blocked sales documents in decentralized Sales and Distribution units
Status Management for Obsolete A/R Summary
If the A/R summary is obsolete, the credit status Credit data obsolete is set. This means that the document is blocked, and appears in the credit representativeu2019s worklist. In Customizing for Sales, in the section Automatic Credit Control, for the single, aforementioned checks, for which FI data is necessary, you can define whether a warning appears in the obsolete data, or whether a status is set.
If you are working with the A/R summary, and would like to re-process obsolete data, it is recommended that you set a status.
Reg
suresh

To update vendor and customer details in BP transaction

I have created a donor in the BP transaction . i need to update the vendor and customer details for the reated donor.
please can someone suggest some BAPI's or FM's which are available to do the same.

Hello Om,
You can get vendor/costumer number and their names in FBL3N when you get bank ledger's line item.
You must use BTE functions.
I don't your techinal skills about SAP but if you don't know ABAP or ABAP dictionary details, you can get help your ABAPer.
I will explain step by step.
First of all, if you don't use BTE before, You must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product : ZFI
Text : BTE Products for FI Exit
Product active : tick check fro activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure.
Define 4 fields.
Component : KUNNR - Component type : KUNNR
Component : NAMED - Component type : NAME1
Component : LIFNR - Component type : LINFR
Component : NAMEK - Component type : NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process : 00001650
Function Module : ZFI_INTERFACE_00001650
Product : ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
I hope it helps to you.
Regards,
Burak.

FI Open Vendor and Customer Line item

Dear Experts,
Do we have to migrate the Tax code in the Vendor and Customer Line Items during data migration?
I read somewhere that is it not necessary to do so.
Please advise.
Thank you.

Hi ,
     It depends on the legal enviroment and sometimes on the settings used in your system. It is a matter of whether the Tax code information is needed in any circumstance that could arise subsequent to migration.
Examples where you must migrate the tax codes:-
     i) Deferred VAT is used.
     ii) Prepayments with Gross Display.
    iii) Prompt payment discounts are VAT relevant.
Kind regards

Tcode for Vendor and Customer Trial balance

Hi,
I want to generate Vendor trial balance & customer trial balance. I want name of each vendor and customer with the normal and special GL balance written against it
Ex:
Vendor A     -    Rs.100-
Vendor B     -    Rs. 2300-
Vendor C     -    Rs. 1000
Total -- XXXXX -
> This should match with my Vendor Reco account total.

If standard report does not suffice your requirement, then create your own.
FOR vendor USE K in transaction code instead of D.
Hello,
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

Display FirstName and Last Name on change password form

Hi,
I have to display FirstName and Last Name in change password form instead of DN of the user the below syntax is displaying complete DN.
resourceAccounts.currentResourceAccount[$(name)].accountDisplayName, would appreciate if anybody can guide me on this.
Thanks

Hi,
For anyone searching how to do this, I've modified the Change User Password Form to contain a user's first and last names. As the User view is not accessible from this form, I added the following:
      <Field name='fullname'>
        <Display class='Label'>
          <Property name='title' value='Full Name'/>
          <Property name='value'>
               <rule name='EndUserRuleLibrary:getRealName'>
                   <argument name='accountId' value='$(resourceAccounts.id)'/>
               </rule>
          </Property>
        </Display>
        <Disable>
          <or>
            <ref>answersVerified</ref>
            <isnull>
              <ref>resourceAccounts.id</ref>
            </isnull>
          </or>
        </Disable>
      </Field>      I'm not at all sure this is the best way of accomplishing this, but I couldn't find forum search results that would allow me to display additional user attributes on this form.
Hope it helps!
Nick.

Can I use one Business Partner repository for Vendor and Customer?

Can I use one Business Partner repository for Vendor and Customer? or do we have to use Vendor and Customer Repository separately. How can we do that? What are the pros and cons? can any one provide some examples:

Hi Deepak
The key purpose of SAP "enabling" the facility of multiple main tables in a repository is to primarily "manage" those master data objects that are related to each other. Typical examples will be a) Customer - Material, b) Supplier - Material, etc.
While, it is pretty easy to add multiple main tables in a repository, it is also important to understand the purpose of doing so based on the business requirements.
Besides, you got to be aware that in case you are "fixing" any issues with one main table (master data object) for which you have to unload the repository, the users will not be able to use the repository that has a main table defined for other master data object. Hence, there are pros and cons of using this capability of multiple main tables.
So, it is really important to understand the "W's" - What, Why, When, Where, Who of Data modeling before actually working on the "H" - How to in the SAP MDM tool.
Hope this helps.
Regards
Neelesh

What is the importance of the tabs like vendor and customer in t.code md04

Hi All,
what is the importance of the tabs like vendor and customer in t.code md04? Could you please explain me...
Thanks
Krish

Hi Krish,
In MD04,you see requirement of material.
Whenever there is Purchase order & Sales order created,you will find relevent Vendor & Customer name respectively when you go for Vendor & Customer tab. When you double click on Vendor It shows you details of Vendor.
Just try & Check it.
Hope this help you.
Regards,
Raja.
Edited by: Raja on May 7, 2009 6:13 AM

How to display vendor and customer name in Bank Ledger

Similar Messages

Maybe you are looking for