How to display Zero values in the chart

Hi,
In BO design studio 1.3 we are using bar chart and line chart for one of the dashboard. we have enabled the data labels and data is also displaying in the chart, but for certain criteria the data is itself zero in the database. In such scenario chart is not showing zero as the data label and it is simply blank. Is there any way to display the values even though it is zero?
Thank You,
Palani.

Hi - I don't see a way to do that; if you want that in the future I recommend posting something on Idea Place - ideas.sap.com

Similar Messages

Displaying Zero Value in a Chart if there exist no database record.

Hello All,
I need to create a chart that displays the number of jobs per hour over a 24 hour period. I can determine the hour the job was created and I have no trouble making a chart with a count of jobs per hour. The problem is that I also want to display the hours that have no jobs on the chart. So in the hours where no job is created there is no database record.
So inorder to show it in a chart Zero values for a particular hour....how shd it be done if there is no zero values in the database for a particular hour???? we dont have the flexibiltiy to add a further table in the database..
Any suggestions would be much appreciated.
Thanks
Regards
Atul

This is basically the same issue that is covered [here|Record selection issue in cross tab.;.
HTH,
Carl

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to Display "Zero Value" or "No Data" Items in a Chart

Hello All,
I need to create a chart that displays the number of jobs per hour over a 24 hour period. I can determine the hour the job was created and I have no trouble making a chart with a count of jobs per hour. The problem is that I also want to display the hours that have no jobs on the chart. I am currently converting all hour data to the text format "00:00". For example, 9:35am would display as 09:00 (as would all jobs between 9:00am and 10:00am) and this is the value that I want displayed under each bar on the chart (x axis).
Any suggestions would be much appreciated.

Thanks V361,
I was hoping to avoid adding a table to the DB with each hour. I thought there might be a tricky way using arrays that I would be able to accomplish the report. I have done a test using Excel and I can get the results that I wanted, so I will now probably add the table to the DB.
Thanks for your input.

How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

Displaying a value "off the chart"

Hi
Hoping someone can help me.
I have a report which has an axis of 0% to 15% in increments of 5 (0,5,10,15). Some of the values I am plotting are greater than 15%. But it is still plotting these on the 15% line.
Can anyone please tell me how to plot these values as off the chart?
Thanks

Hi
Thank for your reply, but that is not what I want to do. I know that I can just increase the axis.
The maximum on my axis MUST stay at 15. The points above 15 must then be plotted as "out of range" points.
Every single charting tool I have used before, including access, has the ability to do this.
Crystal must have this simple ability somewhere!
Anyone??

How to display null values in the graphs, when i select a date range?

Hi,
Can you please help me in achieving the below requirement:
We have a date promt, i have selected the date range from 12-Oct-2009 to 15-Oct-2009 and clicked on the go button.
In the above date range, data is only availabe on 14-Oct-2009. here the requirement is to display as all the records (12th, 13th , 14th & 15th) in the bar graph.
Currently the graph view is displaying the data only for 14-Oct-2009 in the bar graph.
If data is not available it should display in the bar graph as empty for that particular dates.
Help is highly apprieciated.
Thanks in Advance.

Check out [this post|http://obiee101.blogspot.com/2009/04/obiee-showing-zero-in-bargraph.html].

How to Display result value on Pie chart in wad

Dear Experts,
I'm useing WAD to create web template, in that I have a requiremnt to develop Pie chart and it should show material cost according to material type for each slice on Pie chart. I have developed a WAD template for the same and Pie chart as well but I can not see the respective material type cost on Pie chart, where as I can see those values in tool tip when I move mouse over the pie chart, I understand I'm missing a small setting can you please help me to find that setting so that user can see values directly on pie chart without moving the cursor on the same.
Thanks and Regards,
Chandrakant.

are you r using wad 7.0 or 3.5
in 7.0 right click on the graph, edit nyou wil be in the wizard go on step 3 and try to change the series and make sure visilibility is checked
if this doesnt work then click refine and go to series and make sure show lables are checked.
try this.

How to show colmn value in the legend in ssrs Chart?

How to display Legend values in my ssrs Report like below
I want the values like below.
SuccesCount-2000
FailCount-100
No status-150
Can U pls help me for this
ThanX!

I will found the soluction for this ,
Go to Chart Area ->Series Properties->Left Side you have noticed Legend->There you need to add expression in the
fx
i.e ="SuccessCount" & " "& Fields!SuccessCount.value
so you finally get the out put like below
o/p :SuccessCount 2000

How to display zero in the screen's input field using numc type

Hi,
I want to display the zero value in the input field , when I using the NUMC input field on the screen .
The zero will be changed to blank ,when I click the Enter key.
What I should do for it?
Any help is appreciated.
Regards,
Trevor

Hi ,
Thanks for your quickly answer!
I use the numc input field in the dialog's screen.
I am not sure how to do the realize the function like 'UNPACK'?
In fact, I can't changed my input field's data type.
When the status of my input field is display, I can display the zero on the screen. But when the input field is input status , there is blank!
Regards
Trevor

How to display Month values in SSRS report

Hi All,
I have a requirement to display month values in SSRS Chart. x-axis should display all month names from January till current month. How can I set this properties and show it in a line graph
Thanks & Regards,
Regards RCP

Hi,
The above link is not meeting my requirement. I need January till July to be displayed in x-axis
labels of graph. How this can be achieved ??
Regards RCP
You can create a calendar table on the fly and use it for your dataset to be used in the graph. Use logic as below
http://visakhm.blogspot.in/2010/02/generating-calendar-table.html
For getting January till current month use query as
DECLARE @Start datetime,@End datetime
SELECT @Start = DATEADD(yy,DATEDIFF(yy,0,GETDATE()),0),
@End = GETDATE()
SELECT *
FROM dbo.CalendarTable(@Start,@End,0,1) f
As a long time persistent solution best option would be to create a calendar table in the database.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

Zero values in the database

Dear BPC Experts,
I am getting incorrect results when running SPRUNCONSO. It seems that the error is due to zero values that are in the database. Would you know how i am getting zero values in the FACT tables? What should i do to prevent this situation in the future?
Best regards,
Grace

Hi!
Thanks for your comments/inputs. I am getting wrong amounts in the calculation of minority interest expense, equity in net earnings and investments. However, only a few entities are affected.
Minority interest expense = PMIN * Net Profit >>> Using the data in BPC, i dont get the correct results for some entities.
System was calculation correctly in the previous month.
Any idea what is causing this wrong calculation?
Thanks and regards,
grace

Display three Values in Pie charts

Hi All,
I want to display three Values in Pie Chart(%, Value and one more field). Please suggest me any solution for this.
For Eg Pie chart should display value lie this :- Nokia, 25,025, 38.52% (It consists of three differet values)
Thanks,

I am not sure if you could get the concatenation to work.
But here are some ideas (please post if you get the solution):
- Take a look at the list of other formatting options based on the following link:
http://www.oracle.com/technology/products/xml-publisher/blog/xsltext/10134/oracle/apps/xdo/template/rtf/XSLTFunctions.html
- Another alternative is to customize the class file : oracle/dss/graph/SliceLabel.class located in bipres.jar
You would need to customize it to do what you need.
a) Modify this one so that it is used by the BIP Server
C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\lib
b) Modify this one so that it is used by the Client : MS Word AddIn:
C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib
regards
Jorge

How to display field values in long text of messages....

Hi,
Currently iam doing an userexit. In that i want to display error messages. and if we click on message it will display the long text. My question is i want to display field values in the long text. Under the long text's &system_response& i want to display a field value.
Regards
chinna

Hi Chinna,
Within short and long texts, you can use placeholders, which can be replaced with the content of data objects using the MESSAGE statement. A maximum of four character-type placeholders are permitted; they are indicated by #&i# in short texts, and by #&Vi&# in long texts, where i = [1, 4]. If #&# itself is to be displayed as part of the text, it must be specified as #&&# in short texts and as "&" in long texts.
To add some detail on how to create variables in Long text, you have to go to 'commands' and in symbol option provide the variables like
&V1& &V2& and so on.
Hope this helps you.
revert for further clarification.
<b>Alwyas reward Points to useful suggestions.</b>
Regards,
Vikas
Message was edited by:
Vikas Taneja

How to display Zero values in the chart

Similar Messages

Maybe you are looking for