How to dissolve from a connected clip

I want a disolve from the end of my connected clip back to my storyline, I'm stumped on how to do that. Suggestions?

I do this all the time. Simply make your connected clip into a storyline using Clip/Create Storyline while that clip is selected. Now you can apply transitions like dissolve. If you are above your primary storyline clips, obviously your connected clip will show instead of the primary clip during preview/playback. Simply drag the dissolve transition to the place on your connected (now converted to storyline) clip. After a little background rendering it will dissolve smoothly into the primary storyline clip. Be aware, however, that if you use a transition like "fade to color" the video of the connected clip will fade to black (or other color) and take the primary storyline clip below it along with it, blanking out both for the duration of the fade. Dissolve works great when you convert your connected clip to a storyline. Best Wishes.
stpehen

Similar Messages

How do i hide a connected clip so that i can see the master clip underneath?

I am attempting to finalise a wedding video. For some reason the XML output gets scrambled in the transition between Final Cut Pro X and Resolve, losing all the in/out points in those clips which were part of two continuous hour-long movies (the master clips). The audio was scrambled at the same time.
So I have reconstructed the clip sequence in Resolve, restoring the correct in/out points and I have removed the audio altogether. I cannot export this back to FCP because the in/out points get scrambled again, so I have exported the timeline as a quicktime movie.
Now, in FCP Pro X, I have the Quicktime movie sitting as a connected clip above the original FCP Pro X timeline. But it is not quite in synch and I guess the edit points are not always frame for frame correct. To match up the new and old timelines I would like to be able to turn the connected clip on and off - but I can't see how to do this and I am not sure it is even possible.
I can skim the master track but this is very cumbersome. Is there any way to turn off the connected clip as one would do in a normal editor with tracks? Or is there a better way to align various points in the two tracks?

Ha. great! Thanks for that. I did know that! But I couldn't find it by searching the manual and I have spent the last week immersed in Resolve so I have forgotten all the FCP shortcuts already...

How to upgrade from trial connect 9 version with elearning features?

Please advise how i upgrade from my current trial version of Connect 9 to the full version with elearning features.
I see that the public pricing is without the elearning features, so for me this is no good as i need to host courses. The email address of [email protected] is invalid and bounces back and the phone line helpers are unable to provide information to help.
I cannot find costings or online download options anywhere
Please help as a matter of urgency
Thanks

Contact me off-forum and I'll get you all the info you need.
Jorma Jennings
jorma[at]realeyesconnect.com
Not sure why the adobe email bounces, but they probably can't get you anything more than a contact for a reseller anyhow.

5230 - How to stop from continuous connecting

Hey forum!
Im going to be going on a vacation to another country, and would like to shut
down my Nokia 5230 from being connected to the internet.
I have unlimited bandwidth to use in my country, but outside of my country
I'll have regular roaming prices, which are too high for me.
I tried disconnecting it, by keeping the red button held. After disconnecting
it, it automatically started to reconnect.
Even when Im not using any software on my mobile, I can see that its
uploading and downloading small packets.
I put the email service into "offline" so that shouldn't be the problem.
I want to be able to call so the phones profile "Offline" is not the choice for me.
Any help,
thank you!

If you mean notification emails from the Community Forums then read the following by Frank Caggiano. The document is very easy to follow …
Stopping emails from ASC: Apple Support Communities

How to link from a movie clip to main timeline?

My problem first appeared very simple, but I have spent a
while on it and can't think how to solve it. I must say that I am
very much an amateur in designing in Flash and ActionScript.
I created a movie clip containing an embedded video and a
sound clip. In the main timeline I inserted the movie clip into a
keyframe. When I found the movie clip didn't play, I discovered
that the only way of making it play was to place a Stop action in
the keyframe of the movie clip, and also set the whole movie to
loop. The Stop action stopped the whole movie from looping, but
instead made the movie clip loop. If the keyframe is on frame 456,
how do I make it advance onto frame 457 once the movie clip has
finished running?
I've tried various ways around the problem, including placing
a button inside the movie clip to Go to and Play frame 457, but
instead it plays frame 457 in the movie clip.
Can anyone help me with this please?

Hello,
You need to tell flash the "target" you want to play. If not
specified
it will think it is the target you are calling from which in
your case
is the movie clip.
So to go back and play one level up would be:
_parent.gotoAndPlay(457);
If the movie clip was inside another movie clip then it would
be:
_parent._parent.gotoAndPlay(457);
or you can just referent the root of the movie directly:
_root.gotoAndPlay(457);
Search the help file for timeline target and you should find
more about it.
Incubusguy wrote:
> My problem first appeared very simple, but I have spent
a while on it and can't
> think how to solve it. I must say that I am very much an
amateur in designing
> in Flash and ActionScript.
>
> I created a movie clip containing an embedded video and
a sound clip. In the
> main timeline I inserted the movie clip into a keyframe.
When I found the movie
> clip didn't play, I discovered that the only way of
making it play was to place
> a Stop action in the keyframe of the movie clip, and
also set the whole movie
> to loop. The Stop action stopped the whole movie from
looping, but instead made
> the movie clip loop. If the keyframe is on frame 456,
how do I make it advance
> onto frame 457 once the movie clip has finished running?
>
> I've tried various ways around the problem, including
placing a button inside
> the movie clip to Go to and Play frame 457, but instead
it plays frame 457 in
> the movie clip.
>
> Can anyone help me with this please?
>
>

How to keep from losing connection to firefox and reentering user name and password when I close a message in my e-mail that I have read

I use firefox for e-mail and am unsure how to close a message without losing the connection to firefox. Then I need to go through the tedious task of entering my username and password everytime I am finished reading the message and close it. How can I close the message without losing connection to firefox? Also, when I select "save my password" at the sign in page it never saves the information. Why not?

You're welcome.
You could always get a Gmail account(free), set that up as IMAP or Exchange, then forward all of the mail from your POP account to your Gmail account.

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

How to do range selection for connected clips?

How to do range selection for connected clips? Whenever I press I or O, it only selects the primary storyline. I want select a portion of the connected clip and trim it.

If you're using the 10.1.x, and if you set the playhead, so that the circle is over the connected clilp (you don't even need a range selection OR have the clip selected) you can type Option - [ to trim from the beginning of the clip to the playhead; you can type Option - ] to trim from the playhead to the end; or if you do set a Range selection, you can type Option - \ (backslash) to trim both ends off the clip preserving the range selection.
If that circle isn't over the connected clip you require (perhaps you have a stack of clips) then you will need to click on the clip you need to have selected for the trim operation.

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas?

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas? (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

My macbook air does not automatcially connect to wifi any longer when i turn on from sleep, how can i make it connect automatically again

My macbook air will no longer connect to my wifi automatically, I have changed the preferences to automatically selecr known networks but everytime i open the macbook air or after i restart the macbook, i will need to manually l select the wifi. How do I re-config to automatically connect to my wifi. Thanks

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
Wake for Wi-Fi network access
and
Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
Enable Power Nap...
11. Reinstall OS X.

How to print from different wireless connection on same network

I can print wirelessly when I am in range of the wifi to which my computer and attached printer connect. However, when I go to a different wifi connection within the same network, I cannot print. How can I my wifi connections on same network talk to each other so that I can print from second wifi site on same network?

The problem is you loaded the printer directly and now do not have it plugged in.. so delete the printer in the control panel.. then setup the printer again.. this time connect to it as network printer. The bonjour should make it available as a network resource..
Tell me if you still run into trouble doing that. You may need to load the IP of the TC manually..
Window7 has higher security level than xp.. and that can sometimes also cause issues.
Are you using SMB compliant names for the TC, wireless and printer??
Can the windows 7 computer get internet via the TC? Can you ping it?
Look up how to reduce the security level in windows to match xp.. I don't remember the details but you have to do some nifty footwork.

How to read data from a connected modem

any one can help me? how to read data from a connected modem. The modem received real-time data from other server. The data is in text format. I can see this text when I used hyperterminal for dial up and the data is accumulated such as:
@aa1235678
@bb2135647
@cc5214367
since it is real-time data, I want to read one line each time instantly when it arrives.

You need to use the Java Communications API. (http://java.sun.com/products/javacomm/index.html)

How long does it take to get approval from iTunes Connect and how do I find out if they are working on it?

How long does it take to get approval from iTunes Connect and how do I find out if they are even working on it? I'm not really sure if my application was even delivered - from the links in IBA. Any suggestions how one might push the right buttons at Apple?
Also went around in a big circle trying to get beyond the confusion of not having the right Apple ID when I've had it a long time. Confusion abounds and learning this forum also takes a new degree of patience. Humbling to say the least :-)
Anyone been there done that?

[email protected]
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.

How to dissolve from a connected clip

Similar Messages

Maybe you are looking for