How to distinguish Delta download from CRM to Mobile from Initial download

Hi guys,
I checked out that when downloading from CRM to CDB (for mobile), the inbound queue is always CRI_XXX..._CDBI.
For data load from CRM to R/3, I remember that initial load and delta load, the inbound queue names would end up in differnet words (I for initial load, D for Delta load). But for load from CRM to CDB, it seems that only 'I' exists.
My question is, how can we distinguish delta load from initial load via the queue name? saying that the queue name is
CRI_CSA_BUPA_INIT_CDBI, can we simply judge that it's an initial load or delta one?
Thanks and best regards,
Raymond

Yes, CRI_CSA_BUPA_INIT_CDBI is the queue created for BUPA initial load from CRM to CDB. Delta loads from CRM to CDB would create no queues - they would be handled in the objects queue itself (for eg. CSABUPA*) queues.
Regards,
Ankan

Similar Messages

Help needed-Survey template data not flowing from CRM to Mobile & V V

Hi experts,
We have a requirement to create a custom survey template and pass it to mobile. The data flow should be to and fro. as in; from CRM to Mobile Application and vice versa.
Currently we are facing an issue in this that the data if not being passed properly from the CRM TO Moblie.
As i am new to the middleware concepts, i am not sure how to go about analysing if my data in the BDocs for the survey template if correct or not.Some data is present for the survey in the Bdoc(xml), but i am not sure if this xml value is correct or not as the Bdoc table entry (xml value)seems to have been truncated(i cannot view the entire xml there wen i try to open the BDoc fields in SMW01).
any pointers to this is highly appreciated.
Thanks
Swapna.

May be this thread will help
v('APP_USER') not returning HTMLDB user
regards,
Shijesh

How does the Delta functionality works while updating Infocube from PA

Hi Gurus
How does the Delta functionality works when you send forecast to the Info cube from the Planning Area.
As I have weekly based planning, every week we have to update the forecast into the Cube. If I update every week into the Cube , then the values are going to append in the Info cube.
Shall I create ODS in between the Planning area and the Info cube .
(or)
Any other method ?
Please Suggest.

Hi Preetham,
Data Extraction from planning area to infocube usually its supports for full update only, when u r going to load the data from planning area to cube ,it deletes the previous data and u vil get the fresh data, this is the best method performance wise,
if u want to use the delta functionality u can go for planning area to Dso, Dso to cube, it vil supports the delta functionality, but it vil degrades the system performance,
regards
ravi

How to load delta to 2 target ODS 's from a single ODS using process chains

Hi BW Gurus
I am having a current ODS based on 2LIS_02_SCL, deltas also are working fine for it.
our requirement was based to have 2 target ODS on this existing ODS by using export generate datasource.
I have to build a process chain that should enable us to load delta in our target ODS.
Earlier manually for DEV purposes ,i was using the Update data into data targets from the source ODS, this was enabling us to load deltas. But to automate this process we will require a process chain.
Finally , is there any process type in process chain for " Export generate Datasource".
please suggest a good methodology for this scenario.
Thanks in advance.

Hi Ashfaq,
Loading from ODS to CUBE is same as loading from datasource to ODS only.
1. Create export datasource.
2. Create update rules from ODS(export datasouce) to CUBE.
3. Create infopackages(if you dont want to use generated once).
4. include infopackage in process chain to load fromODS to CUBE.
Intialize first manually and change settings in process chain infopackage to "Delta".
5. You can append/enhance existing process chain(loading from datasource to ODS).
Hope it Helps
Srini

How to distinguish 100% 4S sim free (never locked) from a blocked?

I can not buy iphone 4s in the official store, so I'll have to buy a phone, which was brought from another country. I'm afraid to buy a phone that is locked to the operator and it will not work after some time.
If I insert in new iphone 4S my sim card and it will activate it and will catch the network, does that mean that it is not blocked in the future, such as update version IOS?
(there are reports about the phones 4S, tied to the operators, but mistakenly working with all sim cards. there it is mentioned that in the future, these phones will be blocked)
PS:
I apologize for the error - translated from the tips online translator

Well, if you can't purchase an iPhone from an official source that sells officially unlocked iPhones, you take your chances. Many who go this route end up with hacked iPhones & nothing but grief. Good luck, because there is no way to distinguish between a hacked iPhone & one from an official source just by looking at it.

Initial Download OLTP to CRM

Hi friends,
Need some info and appreciate, if you could provide some clarification on the same?
How can we defferenciate whether the object is downloaded Initial download or Delta load?
Could you name couple of Customizing objects for the Initial load?
Thanks in Advance,
ErnieNite

1) To differentiate the Intial download and delta dwonlad in CRM
     queue name for initial download: R3AI_*
     queue name for Delta download: R3AD_*
3) Customizing objects:
   1)DNL_CUST_ACGRPB -- accounting group for BP
   2) DNL_cust_ACGRPP-- account group product.
You can find all of the customizing objects in tcode R3AC3.

Guideline Performance Initial Download from SAP for Utility into SAP CRM

Hello,
Please find below a link (valid for 10 weeks) to the document Guideline Performance Initial Download from SAP for Utilities into SAP CRM. The document is also published in the SAP Service Market Place at http://service.sap.com/utilities. Then choose Technical Information Center - Migration.
The purpose of the document is to give guidelines as well as to share experience for an efficient and high performance execution of an initial download from an SAP for Utilities system to an SAP CRM system, such as:
- Configuration of the initial download
- Ensure optimum performance for the initial download of the relevant business objects
- Avoid unnecessary business data being downloaded
- Monitoring of the initial download and taking corrective actions in case of problems
- Handle errors occurring during the initial download of business objects
- Minimize performance bottlenecks
The document explains the setup and configuration of the SAP for Utilities and SAP CRM systems only if necessary for the understanding of the solution of a described performance problem. This document does not cover the performance optimization of the delta down- and upload and the synchronization download.
The document has the following structure:
Chapter 1 describes the basics of an initial download
Chapter 2 describes how to plan and execute tests to achieve an acceptable performance
Chapter 3 describes the most important technical activities to prepare the involved systems
Chapter 4 describes the most important functional activities to prepare the involved system
Chapter 5 describes how to perform an initial download
Chapter 6 describes measures to improve the performance of an initial download
Chapter 7 provides a list of important repository tables
Chapter 8 contains a list of important SAP Notes related to initial download
I'd highly appreciate your valuable feedback on this document.
Kind regards,
Fritz
Edited by: William Eastman on Feb 17, 2011 2:34 PM

Hi Fritz,
sorry for the late late reply but I didn't notice your answer.
Here are my answers:
(1) I monitored the behaviour on the CRM system, CRM 7.0, SP5
(2) The change should be implemented in the CRM system
(3) Deactivate buffering for scenarios marketing, sale and service via SM30 and table T770MATTR.
By doing this the initial load of 3.2 million business agreements took around 2 hours, with activated scenario buffering I was at least ten times slower.
After the initial load you have to activate the buffering again.
Interesting to know would be why the scenario buffering only affects the initial load of business agreements and no other object. As far as I know the scenario buffering is relevant for the organizational management.
Regards
Alexander

Equipment Download to CRM from ECC

Hi All,
We are trying to download the equipments from ECC to CRM, they are downloading to CRM individually.We want to get them in the hierarchy structure as they are in ECC. Like relevant IObjects grouped to-gether.
Whats the solution for this, please help out on this.
Thanks,
Praveen

Hi,
Below link you can find the details for replicating the Equipment from ECC to CRM.
SPRO> CRM>Master Data--> Installed base --> Replication of equipment from ECC --> Prerequisites and General Information for Equipment Replication
For equipment config download below are the activities.
Initial Download Procedure
1. Activate the adapter object EQUI_CONFIG in mySAP CRM.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Object Management > Business Objects and select the active/inactive box for EQUI_CONFIG.
Examine the filter settings for EQUI_CONFIG. For a each source site, set the filters to the same settings as for the object EQUIPMENT.
Don't forget to regenerate the filters!
2. Start the initial download process for EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Initial Load > Start.
Delta Download Procedure
1. Activate the object class EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Delta Load from R/3 Back-End.
You may wish to activate the EQUI_CONFIG delta download if you are downloading changes for EQUIPMENT.
If you want R/3 to apply filters during the delta download, use transaction SM30 and maintain view CRMPAROLTP as below:
Parameter name = CRM_FILTERING_ACTIVE
Parameter Name 2 = EQUI_CONFIG.
Parameter Name 3 = EQUI_CONFIG
User = CRM
Parameter Value = X
Hope this helps.
Regards,
Chandrakant

Stages when pulling data from CRM datasource?

Hi,
We are pulling data from CRM.Please explain me the steps while pulling data from CRM.

Hi,
Data from CRM to BW is divided into diiferant Data sources.
First need to find data source name.
Use the following seps
First of all, activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
It is depends if you want to use in BW some ready made (Business Content) data analysis models.If so, you need to find your data source in RSA5 in CRM and activate it. See this link http://help.sap.com/saphelp_nw2004s/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm to find Cube you want to analyze in BW, and Data Source connected to it.
BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
CRM Extraction
Pls chk this link for Crm enhancement
Enhance standard data sources in CRM
BWA1 is for all standard crm datsource maintaince
rsa2 for generic datasource
BWA5 i think we use this Tcode after RSA5 activation additionally.
yes(incase of delta)
BWA7 do we have to use this tcode along with BWA1 for standard datasources also or else only for generic datasource.
irrespective of the type of dtasource,use it if you want to load delta(you need to delta enable the datasource here)
So we don't need to put the code as we traditionally do it for R/3 , if we just mapp the fields that would bring the data for these fields.
as i told in CRM we willwrite code in BADI in case you have done enhancement
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/a-c/customer%20enhancements%20and%20userexits%20in%20bw%20-%20sap%20netweaver%20%20know-how%20network%20webinar.pdf
also chk this(credit goes to the writer)
CRm enhancement:
1. Enhance Extract Structure with the required fields. (Create & include an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double click on the Datasource and remove the flags in the column 'Hide Field' for all fields of Append).
2.b) If the new fields cannot be seen in the extract structure of the transaction BWA1 then change and save the datasource, and then activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO . Follow the path ->SAP Implementation guide ->Implementation with other mySAP components ->Data transfer to the Business Information Warehouse-> Settings for the application specific datasources (CRM)->Settings for BW adapter-> Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Refer to the SAP Note 692195 for more info ......
pls Check this links..
regarding bw crm extraction
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
CRM extraction
Hope this helps,
Regards
CSM Reddy

How to launch IC Webclient in CRM 2007?

Hi,
Not able to launch IC Web Client using Tcode CRM_IC in CRM 2007? Any change to the IC Webclient launching transaction in CRM 2007 (6.0) ?
Appreciate your quick response.
Regards,
Venu.

Hello All,
Please note that I changed the subject line to "How to launch IC Webclient in CRM 2007?" from the original title of "How to launch IC Webclient in CRM 7.0 ?" since CRM 7.0 is not yet developed/released by SAP. CRM 2007 is the latest product on the market, so I assume this questions is about CRM 2007.
In CRM 2007, the transaction code "CRM_IC" is no longer available. The reason for this is that the IC WebClient technology is now also used by the rest of CRM! So there have been some slight changes affecting the Interaction Center. For example, the old IC Profile concept is replaced by a new CRM Business Role concept. Now when you start the CRM WebClient, you need to indicate which business role you want to log on with -- IC Manager, IC Agent, Sales Professional, Service Professional, Marketing Professional, etc.
One way to start the CRM WebClient is by adding a favorite to your SAP menu in SAP GUI by choosing BSP Application "CRM_UI_FRAME", any description you want, and then start page "default.htm". To assign yourself to a busines role (like IC_AGENT) you can either use the standard HR Org Model (PPOMA, PPOMB, etc.) like in the past. Or you can cheat and assign parameter "CRM_UI_PROFILE" with value e.g., "IC_AGENT" to your user in transaction SU01. Of course, you could also just create a browser shortcut that points to a specific CRM application server (e.g., http://[server]:[host]/sap/bc/bsp/sap/crm_ui_frame/default.htm
Warm regards,
John

Difference between Delta download and Initial download

Hi friends
what is the difference between Delta download and Initial download
what Tcodes are used for Delta download and what tcodes used for initial download
regards
krishna v

Hi,
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (tcode R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
BR,
Disha.
Do reward points for useful answers.

Initial download - update additional fields/execute additional funct.

Hi All,
We are in the process of uploading data from SAP system to CRM system as a initial download (Transaction code R3CS). Customer has a unique requirement of updating additional fields (configurable fields) from ISU to CRM which are not covered in the initial upload program.
Is there any enhancement/BADI/customizing available in initial or delta upload program to plug in customer specific updates/steps (ie executing Zxxx function module) ?
Thanks in advance ,
Nitin

Hello Michael,
I'd appreciate if you could forward me this document, too.
[email protected]
Thanks in advance & kind regards
Wolfgang

Downloading png images to mobile

what is the best way to download images to the mobile from the server?
can anyone give some link to sample code?

what is the best way to download images to the mobile
from the server?HTTP?
can anyone give some link to sample code?Nicked from the example in HTTPConnection
url = "http://www.example.com/goat.png";
c = (HttpConnection)Connector.open(url);
// Getting the response code will open the connection,
// send the request, and read the HTTP response headers.
// The headers are stored until requested.
rc = c.getResponseCode();
if (rc != HttpConnection.HTTP_OK) {
throw new IOException("HTTP response code: " + rc);
is = c.openInputStream();
Image myImage = Image.createImage( is );

How to activate delta download for BP from ECC to CRM

Hi,
i have completed BP initial download from ECC 6.0 to CRM 5.0.
i dont know how to activate the Delta download?.
Plz anyone tell me the procedure.
regards
geetha.g

Hi Geetha
Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
1. Creating a Request
Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
To define a new data request, choose Display --> Change and New Entries.
Enter data for the request.
In object name enter CUSTOMER_MAIN
2. Starting the Request
Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
3. Monitoring Request
Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Problem with initial download from R/3 to CRM

Hello All,
Initial we were able to download & replicate all object from CRM to R/3 & vice versa such as product ,BP, sales documents & conditions etc. After that <<removed>> R/3 system was refreshed by Client itself. After refresh, connectivity between R/3 & CRM is disturbed.We have observed that while initial download we are facing problem in SMQ1 & SMQ2. After debugging we found that table entry i.e. table :- CRMMLSGUID from CRM & CRMPRLS from R/3 have Logical system guid values different( which should be identical). Because of this no replication is happening between CRM & R/3. How to rectify this?
Regards
Priyanka
Edited by: Rob Burbank on Dec 9, 2011 4:37 PM

Hello,
see note 588701:
"The queues are deliberately halted since the change of the logical
system name in the R/3 backend or the linking of new R/3 backend clients
to a client of the EBP/CRM Server with the same logical system name as a
client already linked to the R/3 backend would lead to severe data
inconsistencies in various CRM applications.
For this reason, such changes are not allowed on principle. The halting
of the queues prevents such data inconsistencies. The following
situations may lead to the queues being halted:
o The logical system of a client of an R/3 Backend system linked to
       the EBP/CRM server was changed in current operation.
o A new client of an R/3 Backend system or a client of a new R/3
       Backend system was linked to an existing client of the EBP/CRM
       server where the logical system name was already assigned to a
       client of an R/3 Backend system linked to the CRM server before.
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed
          in current operation. In this case, the data hangs in the
          outbound queues of the R/3 Backend system as specified under
          point 1 of the symptom. In this case, the logical system name
                                                                 Seite 2
must be changed back to the original value. Then the outbound
          queues can be reactivated. If no data was transferred to the
          EBP/CRM server before the change, also a correctioin of the
          check table is possible.
- The same logical system name was used again in a new client of
          an R/3 Backend system that was linked to the EBP/CRM server.
          In this case, the data is in the inbound queue of the EBP/CRM
          server with the exception GUID_FOR_LOGSYS_CHANGED. In this
          case, the queue entries which have status SYSFAIL must be
          rejected, however, not the entire queues. If the new client of
          the R/3 Backend system you have linked has exactly the same
          data as the old client and if it is meant to replace the old
          client (that is, this was deactivated), also a correction of
          the check tables is possible. In this case, the inbound queues
          can be reactivated after the correction.
The correction of the corresponding check tables or the correct
procecure in individual cases is to be agreed upon with the support of
SAP or SAP consultants at the customer site. In justified cases, SAP can
carry out the correction of the check tables.           "

How to distinguish Delta download from CRM to Mobile from Initial download

Similar Messages

Maybe you are looking for