How to distribute HU items in to diffrent storage types and diffrent BINS

Hi
I have one handling unit and I have done empty all 4 items in it HU02
As a result one material document created
But How can I distribute all items in to diffrent storage types and diffrent BINS
No TR and Posting change created at material doc
What is the config settings to cretae TR ot Posting change notice and Movement types
Kindly Help

yes LT10

Similar Messages

How can I remove items from my start up disc and create more space on it?, How can I remove items from my start up disc and create more space on it?

My Mac Book Air tells me that the start up disc is nearly full land that I do not have the capacity to load Maverick. How can I remove items that I may not need from this disc?

Move them to an external hard drive, formatted as HFS Extended (Journaled).

In WM how to clear partially difference in an open storage type with one mi

Hi
I would like to know how in WM to clear partially differences in an open storage type with one mixed bin not totally counted?
thanks in advance
cadanj

Please do the inventory check for the whole bin.Count the each quant of the material. Difference can be cleared.Use following transactions.
1.LI01N-Create Inventory document.
2.LI11N-Enter inventory count.
3.LI20-Clear WM differences
4.LI21-Clera IM differences.
Let me know if u have any other question.
Regards,
PRashant

HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphone

You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

How to autogenrate multiple items report of the SharePoint list and sent to the client id on daily basis

Dear Support,
As per customer requirement he want to send SharePoint list multiple items reports on daily basis by email autognrated workflow in SharePoint.
I tried for that and created workflow for SharePoint list on new item creation using SharePoint designer 2013 it’s working fine. But I am unable to send list multiple items report by work flow.
Please let me know the process for SharePoint list multiple items report generation and how to sent mail to the client id on daily basis.
Would request your support.

Hi
another approach
use a powershell scheduled script which will get needed lists items, adn will sned the infos by email
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

How to distribute the serial core only with my exe and DLL application using the Labview application builder 8.21. I'm not interested having MAX and other components installed on the customer PC and in the program menu

Since Labview ver 8.0 and later, I am not very happy with the new way the project installer is managing the additional drivers such as Serial.
With LV 7.11 the serial components was included in the cab file and was installed on the target computer in a specific directory. The size of the distribution was pretty small and well suited for compact distribution.
My LV application use only the serial object and with LV 8.21, if I include the serial 3.2 component, I get an enormus file including max, visa ... and a lot of fucky component I do not need.
To distribute my application, I just need, the runtime engine and the serial driver as it was with the version 7.XX
Looking for clever advises from you gentlemen!

Thanks Dennis for you input
My problem is in fact very simple. 3 years ago, I developped a software suite for X ray generator; My company is selling such generator all over the world and our control panel software and DLL (for OEM integrator) is based on Labview professionnal development plateform.
To drive our generator, we just need to transfer ascii data using the strandard RS232 port still present on most of equipments used in the industrial area.
Until LV version 7.11, there was no problem to include serial component in my distribution with a very reasonable size and transparency for the end user.
with LV 8.xx (preparing a new release), I'm very disapointed to see, my distribution is increased of about for 10 Mo to 180 Mo just because I increase the serial component.
May I mix a previous version of the serial component with LV 8.21?
Should I change my source to Visa instruction only and merge visa runtime only to my distribution?
is there any simple serial example based on visa and distributed with th application builder?
I will appreciate your help in order to optimize my distribution
Pascal

How to delete the material records related to storage type

Dear SAP guru's,
I got a situation that if the material "XXXXXX" exists in two different storage type (let say 001 & 002 ) and the material needs to be removed out of one (Let say 002) to avoid the picking and putaway in future.
Inorder to accomplish an above requirement we tried the below cases
Case 1: By flagged the material "XXXXXX" under storage type 002 in MM06 transaction.But it didn't restrict the system on allocating and removing the stock from /to to the storage type 002.
Case 2:After we flagged the material for deletion under storage type 002 ,we used to MM71 transaction to archive & delete the material record that assocaited with the storage type 002 completely.
I am kind of queiries to know if there is any other method or procedure available to delete the storage type associated material records in SAP.
Please guide me with the other options.Thanks.
Regards,
John.

Hi John,
Its very simple, remove the Storage type indicators from the material master - Warehouse View 1 at Stock placement & Stock removal section, with this it won't pickup or place the materials in the concerned storage type.
If you have extended this materials to more than 1 storage type, you need to do the same for all the storage types.
Reward if it is helpful.

Negative stock how do we get this material out of Storage Type 921

thanks for the reply ,
but i am confused in t-code LB10 i have to give source storage stype can u explain step by step.
thanks in advance

As the perviuos answer, your question is a bit incomplete.
LB10 will give you transfer requirements according to either source storagetype or destination storagetype. So if you put 921 into both source and destination, then you should get all transfer requrements in and out of 921.
Then if you find the TR you are looking for you can go to LT04 and create the TO and then define correct destination.
Maybe this answers your question, else try specifying it a bit more.
Regards
Ivar

LT06 enhancement - How to update Storage type and Storage section

Hi,
My requirement is to update Storage bin, Storage type and Storage section, while creating Transfer order from through LT06. So I used the enhancement MWMTO003 to update Storage Bin in LT06 and it is also working.
Similarly I need to update Storage type and Storage section using userexit or BADI.
Is there any way to update Storage type and storage section in LT06?

Check enhancement MWMTO007.
regards

How is it possible avoid zeros in the integer type and pass space?

i define as
DATA : A TYPE I .
DATA B TYPE I.
B = 2.
WRITE: A , B.
OUTPUT IS : 0 2.
I WANT a to be space ...as it is integer type default is zero is there any keyword to avoid zeros to output in integers type???
Expect output : (space) 2.
Sas
Edited by: saslove sap on Jul 20, 2009 10:57 AM

Hi,
Try this.
WRITE: A no-zero ,
B no-zero.
for this output.
OUTPUT IS : 0 2.
Regards,
Vijay

How can I scan multiple items using my HP photosmart 2610 and them be able to be in one attachment?

I have an HP photosmart 2610 4 in1. How can I scan multiple items and put them in the same attachment using e-mail? Using my laptop.

Hi @needyrhelp,
Welcome to the HP Forums!
I see that you are wondering how to scan multiple items using your HP photosmart 2610 and for them to be able to be in one attachment in your e-mail. I am happy to look into this for you!
Please see the how to scan guide for the Operating System you are using. Here is the list of how to scan guides, Scan. Select your Operating System from the list, then select How to scan with HP software, then How to scan a multi-page original text document into a single file. You will need to scan each page one at a time, and add it to the same document. The how to scan guide will show you how. After done scanning to the file, then see the link for How to attach a scan to an email.
If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to report all items in a folder, including subfolders?

I've got a folder structure like this:
Examples
Product1
Ver1_0
Ver1_2
Product2
ver5_5
Ver6_0
How do I generate a Report that lists all items in a certain
subfolder, including all subfolders?
For instance how to list all items in the Examples folder and
below (e.g all items), or how to list all items for the
folder /Examples/Product1 and below?
I need to provide a read-only view of the items in a report etc
for one user-group. There might be a better way than a
report...!?

The spaces in the folder structure got stripped off...
Trying to show it by prepending >'s instead of spaces to show
the hierarchy:
Examples
Product1
Ver1_0
Ver1_2Product2
Ver5_5
Ver6_0
(I hope u get it)

How to delete an item in adept database

I would like to know how to delete an item in my adept Inventory or/and in my Distributor with a script putting the ID as a variable.
What woud you advise ?
Thanks

Hai Madhu,
It is pretty simple.
First u define a button. and in onAction Event of the button write the following code.
process is as follows:
1)get the node
2)get the element
3)using the method remove_element() ,remove the element.
<u><b>The Sample Code is as follows</b></u>
DATA:
      node_flighttab                      TYPE REF TO if_wd_context_node,
      elem_flighttab                      TYPE REF TO if_wd_context_element.
    node_flighttab = wd_context->get_child_node( 'FLIGHTTAB' ).
get element via lead selection
    elem_flighttab = node_flighttab->get_element( ).
    node_flighttab->remove_element( element = elem_flighttab ).
Follow the above code ,it will definately help you.

Link material type and item category.

Hi,
Can you brief me on how following setting in SPRO works?
Plant maintenance - Maintenance and service processing - Maintenance and service order - General data - Define default values for componenet item category
When i checked, this setting is to link item category with the material type and item category is defined based on the material type and maintenance plant. But what is the relation in term of the order type i.e. whenever i create any order with a specifica order type, the default item category should get reflected on the componenets tab of the order?
Is it possible?
Can you guide me how to do this setting.
Thansks

Hi,
Yes it is posible to make all order types item category mark as stcok item "L" as default value. Very well u can set it at following menu path under PM&CS Node
Maintenance and Service Orders
Functions and Settings for Order Types
General Data
Define Default Values for Component Item Categories
Ramesh

How to disable keyboard shortcut for Type-And-Transfer

Hi,
I'm trying to create a macro in Excel that I want to use the ctrl+shft+h keyboard shortcut. However, Lenovo's Type-and-Transfer tool has hijacked that shortcut so everytime I try to use the shortcut within Excel it launches the Type-and-Transfer tool. I've looked everywhere and cannot, for the life of me, figure out how to disable this keyboard shortcut from launching the Type-and-Transfer tool. Anybody have any idea?
Thanks in advance,
jd

Hi,
here is what I would check in:
Registry:
- HKEY_CURRENT_USER\Software\IBM
- HKEY_CURRENT_USER\Software\LENOVO
- HKEY_LOCAL_MACHINE\SOFTWARE\IBM
- HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo
<sorry as I don't havea system with this shortcut type I cannot find the exact same key combination>
My second thought is going more in the direction of an application, that is called Keyboard Customizer
Try this one, if that will fit your request.
Let me know any update, that you can give on this situation.
Cheers

How to distribute HU items in to diffrent storage types and diffrent BINS

Similar Messages

Maybe you are looking for