How to distribute TUXEDO8.0 client

I want to distribute Tuxedo8.0 client in out products like distributing Borland
DataBase Engine. But I have a hard difficulty. Please help me.

Hi.
Try posting this question on the tux newsgroup - tuxedo.general.
Regards,
Michael
hdboy wrote:
I have downloaded tuxedo80_uw.zip and run following command under Xwindows environment:
#java -classpath tuxedo80_uw.zip install
or
#jre -classpath tuxedo80_uw.zip install
then the command generate an installtion screen,but when i selected "server install" type,the machine suspend.
how to resolve it?
thanks--
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

How to run expdp from client ?

Hi All,
I tried searching google and forums for my issue but to no avail > How to run expdp from client side ....like in my laptop.
Because currently our PROD database server has no space for expdp dump file. So I want it directed to my laptop which has an extenal USB of 1TB harddisk...via client EXPDP
import data using impdp command
Posted on: 08-May-2012 11:36, by user: 841731 -- Relevance: 53% -- Show all results within this thread
below command is correct or not? if it is not correct could you please send me the correct command. impdp user/pass@databasename schemas=sourceschemaname remap_schema=sourceschemaname:destinationschemaname ...
System generated Index names different on target database after expdp/impdp
Posted on: 30-May-2012 11:58, by user: 895124 -- Relevance: 43% -- Show all results within this thread
After performing expdp/impdp to move data from one database (A) to another (B), the system name generated indexes has different ...
[ETL] TTS vs expdp/impdp vs ctas (dblink
Posted on: 08-May-2012 21:10, by user: 869578 -- Relevance: 39% -- Show all results within this thread
(table : 500 giga, index : 500 giga), how much faster is TTS (transportable tablespace) over expdp/impdp, and over ctas (dblink) ? As you know, the speed of etl depends on the hardware capacity. (io ...
Oracle Client
Posted on: 21-Jun-2012 22:47, by user: Sh**** -- Relevance: 32% -- Show all results within this thread
Hi Guys, Please can you guys elaborate the difference between Oracle Client and Oracle Instant Client. Also, please can you advise from where I can download the Oracle normal ...
Oracle 10g Client
Posted on: 05-Jun-2012 10:11, by user: dzm -- Relevance: 26% -- Show all results within this thread
to search at oracle site and this forum, but i wasn't able to find a link to download the oracle 10g client. I really need especificaly the 10g version. Anybody know the link or another way to download ...
9i client to access 11g database
Posted on: 22-Jun-2012 07:31, by user: kkrm333 -- Relevance: 24% -- Show all results within this thread
Hi, Can i access a 11g database using 9i client? Thanks,
SQLplus in Oracle Client
Posted on: 14-Jun-2012 00:36, by user: Tim B. -- Relevance: 24% -- Show all results within this thread
Hi, I tried to install an 11g oracle client in linux. As I've compared the files with the files when you install using the oracle instant ...
Re: Information on Oracle Client 11202-1.1.4-6
Posted on: 05-Jun-2012 03:33, by user: 898763 -- Relevance: 23% -- Show all results within this thread
Actually thats the client requirement
Analysing the performance of a single client
Posted on: 28-Mar-2012 02:05, by user: 880172 -- Relevance: 23% -- Show all results within this thread
timeouts even on some of the simplest queries. I want to try and get some data about how just this one client is performing and what it’s doing, but everything Google has thrown up so far is orientated around ...
to make client connection as sys
Posted on: 12-Jun-2012 22:04, by user: user11221081 -- Relevance: 23% -- Show all results within this thread
Dear gurus can i connect to my server from my client machine with sysdba without giving sys password i have connected in different ways as sys@abc ...Thanks a lot.

Though you can initiate the binary from your client side but for the file creation, there is no other way but to store it on the server side. So your best bet would be to get some space free on the server side of yours.
Aman....

How to accelerate by partitioning drives & how to distribute data among 'em

Dear forum,
I have read guide to storage acceleration and guides to phototoshop acceleration, but they always warn that the best solution depends on the work i do, the hardware i have, and the hardware i think i can afford to buy. I'm hoping that if i tell you what photoshop work i do, what hardware i have, and what hardware i'm intending to buy, you can tell me how to accelerate by partitioning my drives and how to distribute data among them. My biggest questions are about how big the volumes should be, and what should go on each volume. It sounds vague here, but I get more specific below:
THE PHOTOSHOP WORK I DO:
*wet-mount raw scans of 6x7 cm film using silverfast software on microtek artixscan 120tf 4000dpi scanner: resulting 16-bit TIFF file is typically 550 MB in size.
*working in Photoshop CS2 on same file, adding multiple layers makes file 1 GB to 1.4 GB in size
*my system's limitations show up most painfully when I OPEN a file (this can take five minutes) SAVE a file (this can take more than ten minutes!), when i FLATTEN the image's layers for printing (this can take 5 minutes), and when i CONVERT the file from 16-bit to 8-bit (this can take 5 minutes). most other operations in Ps CS2 are fast enough (not snappy, but fast enough) for me to stay with my current processor for the time being.
THE HARDWARE I HAVE:
*Power Mac G5 dual 1.8GHz, made in 2004, with only 4 slots for RAM (not 8 slots).
(I'm told this has quite limited bus speed, as compared with other dual-processor G5s, and that this hardware will not benefit much at all from adding a RAID array.)
*one internal seagate 80GB 7200rpm SATA drive. this is half-full (it has 39 GB on it): it holds my OS and my Users folder, but NOT my photoshop image files.
*one internal Western DIgital 400 GB 7200rpm SATA drive. this holds my photoshop image files, but not my user folder.(This WD drive turns out to cause the G5 to hang up occasionally, requiring a re-boot; to avoid this, i recently learned, i can connect it with a host card adapter [see below].)
*two 500 GB external firewire drives
*two 300GB external USB drives
*I have 2.25 GB of RAM, but I'm about to buy 2 more GB to max out at 4GB.
THE HARDWARE I'M INTENDING TO BUY:
*2GB of RAM, of course.
*two Hitachi T7K500 500 GB SATAII HD 16MB Cache 7200rpm drives to occupy both internal drive slots in the G5
*a 2-drive external enclosure to hold my old seagate 80GB drive and my old WD400GB drive.
*a seritek host card adaptor for connecting the external enclosure to the G5.
THE PLAN:
What follows is a combination of suggestions I have received about what I could do and my speculation about how I could do it. Please see my Questions, embedded in the lines below: I'd be very grateful for any amendments or directions you can offer on this topic.
Drive A: first newly internal Hitachi 500GB drive:
partition into 2 volumes:
first (faster) volume, "volume A1," of 100GB to hold OS and Users folder but NOT photoshop image files.
(Question: how much space should I leave free on volume A1 for optimum performance? is 50% free of 100GB optimal? is 60% free of 100GB better? Is 50% free of 150GB better still? or does that cut into the other volume's space too much (indirectly cutting into the space of "volume B1" on Drive B, which is to be the WorkDisk/ScratchDisk)?
second (slower) volume, "volume A2" of remainder GB (almost 400GB) as backup for 400GB "volume B1" of the OTHER internal Hitachi Drive, a.k.a. Drive B.
Drive B: second newly internal Hitachi 500GB drive:
partition into 2 volumes:
first (faster) volume, "volume B1" of almost 400GB as designated WorkDisk/ScratchDisk for large photoshop image files;
second (slower) partition "volume B2" (exactly 100GB) as backup for 100GB volume 1 (OS volume) of the OTHER internal Hitachi Drive, a.k.a. Drive A.
(Question: how much space should I leave free on this WorkDisk/ScratchDisk for optimum performance? is 50% free of almost 400GB optimal? is 60% free of almost 400GB better? Is 50% free of 300GB just as good, with the additional advantage of indirectly allowing "volume A1" on Drive A to be 150+GB?
Drive C: old Seagate 80GB drive, in external enclosure: disk designated for running the Photoshop Application? How would I set this up? any pitfalls to watch out for? should i partition this drive, or leave the whole thing for Photoshop? or is it better to run photoshop off Drive D?
Drive D: old WD 400 GB Drive: second scratch disk? Storage disk? Both storage and scratch disk? how large should an empty volume on this disk be in order to be useful as a scratch disk? volume 1 or volume 2? if i run the Photoshop Application off of this drive, how large should the volume for that be? should it be volume 1, the faster, outside volume, leaving volume 2 for scratch disk space? or vice versa?
External Firewire and USB drives: i guess i'll just use them for storage/archiving and extra backup? or am i much safer buying more SATAs and Enclosures? or are the external firewire and USB drives plenty safe (so long as i double-back up), since i'll only power them up for the data transfer, and then power them back down?
Given that the large Photoshop files are not in my User folder, does it matter whether i keep the User folder (with its MS Word docs and a bunch of PDFs and so on) on my OS volume, "volume A1"? would it speed things up when I'm using photoshop if i moved the Users folder to another drive? what if i'd like to play iTunes while also working on photoshop? my iTunes music folder (with all the song data) is already on an external firewire drive. but the iTunes Library and iTunes application are, of course, in my User folder, which is on the OS drive. would moving the Users folder to another drive make much difference when i use photoshop and iTunes simultaneously?
But I wonder whether it makes sense to be using volume A2 on Drive A as a backup drive: wouldn't it make more sense to back up my working files to two external drives that can be traded out, one on-site and one off-site, back and forth (not so convenient when one of the backup drives is internal!)? and after all, why would i devote a 400GB volume to the task of backing up another 400GB volume that will never be more than half full? I need to leave a WorkDisk/ScratchDisk half empty for efficient use, but i can back up that 200GB of working files on a 200GB volume, right? so for a backup drive, I might as well use a slow, inexpensive external USB drive that will only be tuned on for backup and will then stay powered off, a drive that's easily transportable on and off site, right? or am i misunderstanding something?
by the way, what backup software do you recommend for backing up back and forth between Drive A and Drive B? I've been using Carbon Cpy Cloner. do you recommend that? or something that does more archiving of progressive states of data?
Thank you for any help you can offer!
Sincerely,
Mark Woods
Dual 1.8 GHz PowerPC G5 (2.2), 512 KB L2 Cache per CPU, w/ 4 RAM slots Mac OS X (10.3.9) 2.25 GB DDR SDRAM (2x128MB plus 2x1GB)

Crossposted: Re: How to use Oracle partitioning with JPA @OneToOne reference?

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

How to upgrade the Oracle Client silently ?

Hi all,
I have to upgrade the Oracle Client from 8.1.6.0.0 to 9.2.0.1.0.
I use the -record option for creating the destination file or edit the response file manually for being able to install the new client. But I have no idea, how to remove the old client.
The following command doesn't work:
C:\Program Files\Oracle\oui\install\setup.exe" -deinstall DEINSTALL_LIST={"oracle.client","8.1.6.0.0"}
What am I doing wrong? How to remove the Oracle Client silently?
Thanks for the help and best wishes from Frankfurt.
Dimitri

I created a instant client silent DE-INSTALL for version 10.1.0.2 on XP.
setup.exe -silent -deinstall -responseFile Z:\yyyyyy\xxxxxx.rsp
These are parameters are in my response file...
ORACLE_HOME="C:\oracle\InstantClient\10.1.0"
ORACLE_HOME_NAME="OraInstantClient10g_home1"
TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
SHOW_DEINSTALL_CONFIRMATION=false
SHOW_DEINSTALL_PROGRESS=true
REMOVE_HOMES={"c:\oracle\ora81","c:\oracle\InstantClient\10.1.0"}
You still have to manually update/remove the PATH & TNS_ADMIN environment variables and the file system directories.

How to distribute my windows phone 8 app and windows store app without publishing in the store

How to distribute my windows phone 8 app and windows store app without publishing in the store
any business license or enterprise license needed..
I am a windows developer talking behalf of my company i.e wipro
I have a question about the enterprise license and we are building an app for the limited users i.e our company employees and users and we do not want to publish in the store
How to release the app?
what are licenses etc needed?

Hi,
for developers distributing apps without Publishing in the Store, the sideloding Enterprise key license through volume licensing is required.
Starting May 1, 2014, customers who want to enable sideloading will be able to purchase an Enterprise Sideloading key for $100 through the Open License program.
An unlimited number of devices can be enabled for sideloading using this key.
thanks
diramoh

How to get the loaded client sequence file path/name?

I added a step in Process model, and wanted to get currently loaded client sequence file name/path. I used the variable of "SequenceFile.Path" but then I realized what I would get is the process model file path, not loaded client sequence file path/name. How can I get loaded client sequence file path/name?
Thanks!
Jacky

I dont understand what you are trying to achieve. Can you provide more information.
If you are trying to dynamically load and run a client sequence file at run time you need to make a couple of calls to the TS API from inside the process model, Engine.GetSequenceFileEx to get a reference to your sequence identified by its pathname, and then Execution.ClientFile to tell the process model which sequence you want to run.
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't.

How to use remote desktop client in mountain lion

How to use remote desktop client in mountain lion.
I want to connect my other system(ubuntu) using mac remote desktop client, But i could not locate remote desktop client in moutain lion.

In Ubuntu 12.xx use Dash to find "Desktop Sharing" and set the preferences, including requiring a password.
Then in Ubu use System Settings > Network to determine your Ubu machine's IP address, such as 192.168.1.13.
On the Mountain Lion Mac do Finder > Go > Connect to Server and enter: vnc://192.168.1.13 or whatever your IP is. Enter the password that you used in the Ubu Desktop Sharing setup, when asked.
On the Ubu machine answer the question that pops up asking for permission to connect. Your Ubu screen will now show up on the Mac, and you can remote control it. Here I am running "Octave" (a math program) on the Ubu machine, remotely.
Works great! BTW, you can do this from an iPad too, using a VNC client such as Mocha VNC Lite. You can even run both remotes simultaneously.
Good luck.

Documentation on How to Develop an OPC Client Using LabWindows/CVI?

What documentation is there on how to develop an OPC client application using LabWindows/CVI? What tutorials, if any, are there? What reference manuals, if any are there?
I am completely new to LabWindows/CVI. I will be starting soon with the tutorial, "Getting Started with LabWindows/CVI". However, our application needs to communicate with an RSLinx OPC Server. Any documentaiton on how to learn to do this would be very much appreciated.

http://www.ni.com/white-paper/4626/en/ Just did a quick google and this came up, Labwindows CVI and Labview are quite different but I usually look at Labview examples then try take the general idea from the example and apply it in CVI, hope this helps

Changed IP address, how do I update the clients

I've poked around but all I can find is info about how to change the IP address of a TC without additional information about what to do with existing clients.
I'm not using a TC in this case (NAS frontended by a Mini providing AFP accesss), but I figured this would be the best place to ask.
I set up TimeMachine on most of our Macs (all 10.7 and 10.8) a few weeks ago, but just had to reconfigure my network which neccesitated changing the IP address of the host that provides the TM remote disks.
How do I tell the clients to start using the new address of the server? Will just adding a new disk do the right thing (I haven't tried as I don't want it to clobber what already exists).
Thanks.

Yes, you have to change the setup in each computer to redirect it to the new location of the backup disk..
You can do a TM reset.. but that should not actually be necessary.
See A4 here. http://pondini.org/TM/Troubleshooting.html
But TM is smart enough that when it finds the disk.. it will then find its previous backups and continue the backup .. after suitable verification. You can change the computer name. Change the disk name. Change the backup sparsebundle name.. TM will still find it and continue to use it. And even if there are multiple sparsebundles or disks with the same name or even computers with the same name.. which would break network rules,, but TM still won't get confused.
Again read up a bit of how TM works its magic.
http://pondini.org/TM/Works.html
The UUID is picked up from source hard disk I guess.. and that is what is used. This ensures everything is kept separate from names or even IP address.

How to access Hyper-V Client from Hyper-V Server to the new machines?

Hi
We have a small company in that we have 50 machines, i am having windows 2012 r2 server, i installed Hyper-V with that i have created virtual OS(winxp and win7) in the Hyper-V server. My question is how to access them in client Machines, Can Anybody help
me in this regards?
Regards
Meer Akbar Ali

Hi Meer,
In addition , you need to use external virtual switch for these VMs that are used for RDP connection from clients .
Please refer to the article below for virtual network configuration :
http://technet.microsoft.com/en-us/library/cc732470(v=WS.10).aspx#BKMK_ConfigVN
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to distribute Reconcilation account balance from a Prft Cntr-FAGLGA35

Hello,
Please provide your input for the below query:
How to distribute Reconcilation account balance from a Prft Cntr-FAGLGA35?
Regards,

Hello,
Thanks a lot for replying.
I have done new posting KR (vendor Invoice), where in General Ledger View the Pofit Cneter got populated in the vendor line item because of the doc spliting.
Now when I hae trying the do assessment of the vendor balance as directed below, no sendor is getting selected.
Please help me how to do the assessment of reconciliation account.
Regards,

How to distribute from cost center to profit centers?

Dear Experts,
We have created profit centers as per business. We have certain expenses that are common. e.g. IT, A/c, HR etc. We have created cost centers for the same. Now we want to assign it to various PCs. How to distribute from cost center to profit centers?
With Regards,
Ajeesh S
Moderator: Please, avoid asking basic questions

Assign profit center in cost center master data at KS02. It will directly post to profit center
Srinivas

How to create web service client

Hi All,
I am new to web services .Can any body explain how to create web service client ....
Please give the give the discription step wise.
Thanx
Arun

Hi Krishna,
Yes it is possible.
Check this Link
[JDeveloper Web Service|http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2]
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2
I strongly suggest you to go for Eclipse, instead of Netbeans or Jdeveloper incase of WebService. If you want to run your code in all the Server without making any changes go for Eclipse based development for Web Service.
Kindly let me know if you need some more inputs.
Regards,
Zack

How to startup DB in client?

Hi there,
How to startup DB in client?
SQL> conn scott/tiger@mytestdb as sysdba
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
ORA-12528: Message 12528 not found; product=RDBMS; facility=ORAI used all default setting when creating DB.
What other setting is needed?

You have 2 problems:
1) ORACLE_HOME not set as environment variable (you don't see a real error message)
2) dynamic service registration with the listener
Error is:
Error:     ORA-12528 (TNS-12528)
Text:     TNS:listener: all appropriate instances are blocking new
     connections
That means , listener does not know the service, because there's no one defined statically in your listener.ora . Dynamic registration requires an open database.
By the way in my opinion it's not a good idea to grant user scott the sysdba privilege.
Werner

How to distribute TUXEDO8.0 client

Similar Messages

Maybe you are looking for