How to divide my HDD into two partitions ?

I have the original recovery DVD put in my notebook and I dont know how to re-partition my HDD.
I want to divide it into two partitons (primary,and Extended?

Hi
If you want to create second partition on the HDD I would really recommended using an 3rd party utility like partitions magic 8
This tool is amazing. You can create and manage the partitions on the HDD while Windows is running.
But you could also create a partition using the Recovery CD.
In such case you have to boot from the recovery CD and under Setup or expert mode.
There simply type a size of the first partition and the Recovery CD will create an 1 partition on the HDD.
After the OS installation you have to go to the disk management and there you can make the second partition visible.
PS: The usage of the recovery CD will erase the whole HDD!!! therefore I prefer the usage of the PM8

Similar Messages

How to divide one catalog into two?

I have a question that I can not find an answer to and hope I can get the help here.
Lightroom 5.
I have one catalog now and would like two. The reason is I have two things that I shoot. I do studio work for my clients and also do landscape photography for myself and for sale. I would like to keep the two catalogs seperated. One reason for this is when I use the star system to organize my photos then do a search for say 3 stars it brings up my portrait work and landscape work. I have all my files organized on my hard drive and simply want them to stay where they are but would like 2 seperate catalogs to reference. I can not figure out how to do this. Is anyone out there able to explain this to me? Thanks

davidKheaton wrote:
So if I understand correctly, if I make a collection of all my portrait work then export as new catalog it will create the new catalog and keep all the keywords, collections etc and leave the files where they are? Then if I do the same thing to all the landscape images then just delete the original catalog it is all good?
Well, there are a few assumptions that only you can verify. The major assumption is that all of your photos is in either one or the other category, that there aren't any photos in a 3rd category, and that you can segregate the photos properly. Then all is good ... except ... in my opinion, you are now doing unnecessary work to avoid the benefits of Lightroom
So if I understand correctly, if I make a collection of all my portrait work ...
I still recommend you stop right there, make a collection for landscape, make a collection for portrait, and not bother with splitting the catalog; your collections give you a virtual split, which is just as effective as actually splitting the catalog, but its less work, and it eliminates the possibility that you accidentally import a photo into the wrong one of your two future catalogs.

I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?

I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?

If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
How to erase and install Snow Leopard 10.6
Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8

Dividing a project into two projects

How do I divide my project into two projects so that I can burn it to a DVD? I have 2hrs 40 mins and this is too long. thanks!

Go to the Project Library View and select your project.
Then FILE/DUPLICATE PROJECT and give the duplicate a name like "your name - part 1".
Then duplicate it again and give the duplicate a name like "your name - part 2"
Now you can open "part 1" as a project and delete everything that is in part 2.
Open "part 2" as a project and delete everything that is in part 1.

Divide Dashboad pages into two lines

Hi Experts,
I am working on 11.1.1.5.0
I am facing below problem.....
Lets say you have some 15 pages on a Dashboard and all these pages by default comes on one line.
I want to divide these pages into two lines with 8 page on 1st line and 7 pages on 2nd line.
I think this can be achieved by using java script but dont know how to achieve this.
Could you please help....
Thanks in Advance.
KD

Hi prashanth,
This we can do with javascripting but the problem is it squeezes the dashboard page and changes the colour of dashboard.So better to go for drop down of page items as you have 15 pages
Follow this links http://forums.oracle.com/forums/thread.jspa?threadID=1014941&start=0&tstart=0
http://forums.oracle.com/forums/thread.jspa?messageID=9226234?
you need to change the javascript as needed,so you can consult any JavaScript guy from your company
In between your previous posts are not closed by awarding points...please follow rules and this is your previos post
http://forums.oracle.com/forums/message.jspa?messageID=9296458#9296458
hope answers your question.
Cheers,
KK

How to divided Main view into three sub views

Hi Friends,
Requirement : i have created four views, 1. Main View 2. search View 3. Display View 4. Update View
Now i have to show all the sub views in one view that is in Main View.
Can some tell me how to 1. How divide one view into two vertical views and 2. how to divided second half view into two horizontal views. if any quires please let me know
Note : High Priority
Thanks in Advance
Sankar

Hi Sankar,
The contextual panel is a UI element like any other.Once you insert the ContextualPanel UI element, you can insert child UI elements of FreeContextualArea, NavigationList, and ViewSwitch.
For Contextual Panel.. please check WDR_TEST_EVENTS.
And read sap help..
http://help.sap.com/saphelp_nw70/helpdata/EN/28/fe5a42091de32ce10000000a1550b0/frameset.htm
Cheers,
Kris.
Edited by: kissnas on Mar 22, 2011 10:01 AM

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

How to divide the iview into frames?

Hi Experts,
Please tell me how to divide the iview into frames.Kindly provide the steps.Its urgent.
Regards,
Nutan

Hi Nutan,
Now its clear!!
If I understand right. You want an overview page full of links to go to your different pages?
Or maybe you want a link form each page to go to another page?
In Portal Navigation through hyperlinks is possible.
You can either do that using EPCM.doNavigate("ROLES://...") {check for EPCM API of help.spa.com}
Or you could do that by simple
<a href="http://www.sdn.sap.com/irj/portal/myql">CLICK</a>
{check for Quicklinks on help.sap.com}
Either way you'll have to make a small JSP for that.
Hope this helped
If so kindly reward with points
Prem

How to divide SAPS when having two instances on same host

Hello
I wander how to divide SAPS when having two instances on same host. By looking at st06?
Thank you in advance

Yes SAPS is nothing but the CPU power used by the SAP systems. SO if you have 2 SAP systems stacked on the same server, check the CPU utilization over a period of 7 - 10 days, average out & that should give you a fair bit of idea.
- Regards, Dibya

How to divide an bytearray into chunks in java using streams

how to divide an bytearray into chunks in java using streams

i'm trying to read an image using fileinputstream then converting to bytearray after conversion i have to read that image chunk by chunk and write to a outputstream

I need to know how to break my page into two pages so i can send it

I need to know how to break my page into two pages so i can send it

Hi,
You can add new form fields via the add item bar. For example if you want them to fill in their name, you'd add perhaps 2 text fields, one for first name, one for last name. Text field is the first icon on the add item bar. Each field allows you to specify a custom label, you can click it to edit the label. Are you seeing the add item bar?
Once you've added all your form fields, you can test your form by clicking the "Test" tab, and then clicking the "Test Web Form" button. That will open a browser to your form, that you can test filling it out. When you've filled it out, you click the submit button. The response will be saved to our service. You can view the submissions, by going to the "View Responses" tab.
Once you've finished testing your form, and want to distribute to your users, go to the "Distribute" tab, click the "Open" button. This will make sure your form is open and accepting repsonses. Then copy the URL by clicking the "Copy Link" button. You can then email that URL to your users, so they can fill in your form.
Does this help?
Thanks,
Todd

How to split invoice/document into two venders?

Can anyone please tell me how to split invoice/document into two vendors. Like if I get an invoice for $1000 and it needs to be splitted between father and son, $500 to each. How would I set that up in SAP? I am not sure if this will be an invoice split or a document split.
Thanks
Monika

If you are using an FI entry F-43 to generate invoice this can be done by giving the same invoice ref. in the Inv. Ref. field for two vendors. This is manual
Document Split will split the document between two profit center and not between vendors.

How to divide an image into 100+ grids

Hi
I have a problem here;
I need to divide an image into 100 or more grids on client side and I need to get the id of a clicked grid on server side. I found some mapping ways but it seemed too hard to achieve. I achieved to get coordinates of mouse click but this time if user uses control button + mouse scroll, all coordinates of the image changes. Can anyone offer me a solution.

ı am working on adf faces they wanted me to do that on server side. But I am very new at this and I am really confused right now. How can I map 100+ sub images like one big image. I saw some examples on web but they include just two or three mappings but how to do this mapping with many?? I tried to do this by taking coordinates of click and calculating which grid is clicked but everything fails if user resizes the window.
If there is a way to do that I was thinking of storing path of every grid on a list at server side and putting an image on the screen for every element of that list and by this way I could easly get which grid is clicked by just taking the id of clicked image. Can anyone help me to do this.???

How to split the records into two parts

Hi experts,
I have a field with 75 char length, this field have records also, Now i want to split the field into two differnt fields. That means upto first 40 char goes to one field, from 41st char to 70 char goes to another field, for that how to split record into two parts.
Plz advice this,
Mohana

Hi,
Do the following:
f1 = fsource(40).
f2 = fsource+40(30).
where fsource is the 70 character original string and target strings are f1 (length 40) and f2 (length 30).
Cheers,
Aditya
Edited by: Aditya Laud on Feb 22, 2008 2:10 AM

How to split a file into two small file

Hi All,
          I want to raed a file from FTP server.Then i have to split a file into two small file.File format look like this.
         R01!service_order!item_guid!resource_guid!assignment_guid
         R02!Service_order!product_id!product_discription!quantity
         R02!Service_order!product_id!product_discription!quantity
         R02!Service_order!product_id!product_discription!quantity
i want split file into 2 file,according to header and item details.one table containt header information (label R01) and second table containt (label R02).
can anybody help me for this.how can i split into 2 file.
Thanks
Vishwas Sahu

Create 2 internal tables. sat it_header, it_detail
Check for 1st 3 characters and if it is R01 then send it into it_header and if it comes out to be R02 then send it to it_detail.
Once done... You can either attach these tables into mail as two seperate files
Or you can download each internal table using GUI_DOWNLOAD.
Hope this helps!!
Kanchan

How to divide my HDD into two partitions ?

Similar Messages

Maybe you are looking for