HOW TO DO A CLEAN INSTALL OF LEOPARD?

UNFORTUNATELY MY IMAC COMES WITH TIGER PREINSTALLED AND NOT LEOPARD AS THEY PROMISE TO ME, THEY ARE GOING TO SEND ME A DISC... I JUST WANT TO KNOW HOW CAN I DO A CLEAN INSTALL OF LEOPARD WITHOUT HAVIND TO INSTALLE IT OVER TIGER?
I think if i installed from whe tiger os, i will keep some parts of tiger.

If your mac is new and you do not have anything on your system that you want to save then do a new install, When the installer asks you to select the destination ( HD) also open the option button and select the new install and select the extended format for the HD. Also the archive and install should work well for you.

Similar Messages

  • Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

    Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

    See this article.

  • How do I import my address book after doing a clean install of Leopard?

    I just finished doing a clean install of Leopard and I realized that I forgot to export an Address book archive before erasing my hard drive. I still have all the Address Book files stored in Application Support in my Library (on my backup hard drive) but I don't know how to get those files into Address Book. Whenever I try the different import options they are all grayed out.
    I also have the Address Book files stored on my iPod Touch but syncing with my Touch doesn't seem to bring them into my computer. Is there anything I can do at this point besides entering them in one at a time?! Copying and pasting the files from the backup to the current folder doesn't seem to do any good either. It will tell me that the files I am trying to write over and in use. It says this even after I close Address Book.

    Ok, I got is to work by selecting the folder itself and copying it over. Aparently it does work if you open the folder, select all the contents and then paste it. I didn't think it would matter which way you did it.

  • How to install a clean install with leopard upgrade DVD!

    Does somebody know how to do an clean install with a Leopard upgrade DVD?
    I bought my MacBook for 1 week ago, and them said that i would get leopard sent later. And when i get it, its a upgrade cd that i cant install only leopard on my ny frsh hard-drive. *** apple?

    First, there is no such thing as a "clean install" option in OS X. But the "cleanest" install is to start with a reformatted drive (using Disk Utility's "Partition" tab), followed by an install of the OS that will be cleansed of any traces of OS or file system corruption. (The "unclean" options, "Upgrade" & "Archive & Install" won't be possible, & the erase part of "Erase & Install" is at this point redundant.)
    However, if you use Setup Assistant (which runs after rebooting) or Migration Assistant to bring over copies of old system components, applications, & settings, you may be reintroducing something "unclean" from the old versions.
    This said, if your up-to-date disk is just an updater (nobody seems to know yet), you can do a "cleanest possible" install by following the above with your original Tiger Installer disk, letting it reboot & not importing anything during setup, & then following the instructions supplied with the up-to-date disk to upgrade. At this point, you may want to clone the startup disk for future reference, before adding back in your apps & user files by whatever method(s) you chose.

  • Clean Install of Leopard - How to import old mail?

    So I did a clean install of Leopard as per recommendation from a guy at the genius bar. I backed up my library folder on an external drive before doing the install. The guy at the store said I could import the old emails/ mailbox/ folder structure and addresses into the new mail and address book using the files from my library.
    I tried to do this using the import functionality but it is putting everything in a mailbox called import.
    Does anyone know the proper way to do this? Should I replace the mail files with my old ones?
    Also should I use the import function for iPhoto or just drag all the photos over to the application? iPhoto is also having problems importing.
    Thanks for the help.

    That is what the guy at the Apple store had told me to do and what I have been attempting to do. However, it does not work.

  • Can't long in to iWeb after clean install of Leopard and upgrade to Snow

    I just recently did a clean install of Leopard and then upgraded to Snow Leopard. Everything is working ok except for iWeb. At first, I thought I had just forgotten my password but then I reset it. I logged on here with it and on iTunes. I can't edit my page at all. How do I get into iWeb now? The template I created through iWeb of course is not on my computer- it's just on my iWeb site. Can I call to get someone th help me or do I need to start all over. How do I do that because I have a subscription?
    Thanks
    Daniel Arnold

    heatharnold wrote:
    ...do I need to start all over.
    Daniel ~ Welcome to the discussions. If you didn't backup iWeb's key Domain file before the clean install, you'll probably need to start over. I say "probably" because even though you didn't deliberately back up the Domain file, perhaps you were running Time Machine — in which case, there's still hope:
    Recovering items using Time Machine and Spotlight
    Only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
    Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb.
    You can manually back up the Domain file, or use Backup to back it up.
    Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWebBackupretrieve.html
    And in future:
    _iWeb ’08: Backing up your Domain file_

  • Glitchy Display after Clean install of Leopard (G5 dual 2 GHz, Radeon 9600)

    Hello,
    I'm having weird glitchy display issues after a clean install of Leopard on my work machine. There was years of crap on this machine, several user accounts and it was extremely slow. I was advised by my tech guy to wipe the HD and do a clean install of OSX Leopard and all my Apps (Adobe CS3 & Extensis Suitcase X1).
    I immediately noticed glitchy display issues. First, when i scroll over anything with my mighty mouse it leaves a trail of glitchy weirdness where my cursor was:
    http://i6.photobucket.com/albums/y239/dylandog/screenglitch2.png
    Second, in certain applications if i move a window my clicking and dragging the top bar or a window it starts "disintegrating" and getting all pixelated. If i shake the window while doing this it gets worse:
    http://i6.photobucket.com/albums/y239/dylandog/screenglitch1.png
    I ran software update thinking that would help...Still doing it.
    I also installed 4 GB of memory (the max for this machine) to try increase speed. It did increase speed, but I'm still experiencing the display issues.
    I'm going to run the CS3 updates now...I doubt that will fix it, but you never know.
    Does anyone have any suggestions on how, or what to do to fix this?
    Thanks in advance!!
    BTW, The specs on my machine are as follows:
    Power Mac G5
    Dual 2GHz circa 2005
    4GB RAM
    ATI Radeon 9600
    30" Cinema Display
    19" Planar PL1910M LCD
    OSX 10.5.1
    Message was edited by: Justin Lancaster

    Many people have reported that there ATI 9600's don't work well in leopard. Most were able to fix the problem by installing old ATI drivers, including me. I still get glitches but only when going from a full screen w/thousand color back to a million colors, but the glitches only affect the docks stacks.
    The guide can be found here: http://interandom.com/2007/10/31/leopard-ati-radeon-9600/
    Let us know how it goes. Good Luck.

  • How to perform a clean install of Windows 8 / 8.1

    This document describes, how to perform a clean install of Windows 8.
    Windows 8 System Requirements
    1 GHz or faster processor (with PAE, NX and SSE2 support)
    1 GB RAM (32-bit) or 2 GB RAM (64-bit)
    16 GB available hard disk space (32-bit) or 20 GB (64-bit)
    DirectX 9 graphics device with WDDM 1.0 or higher driver
    Additional requirements to use certain features:
    To use touch, you need a tablet or a monitor that supports multitouch.
    To access the Windows Store and to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768.
    To snap apps, you need a screen resolution of at least 1366 x 768
    More Info: http://aps2.toshiba-tro.de/kb0/TSB2903E20000R02.htm

    I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install.  I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software.  It asks for the product key.   I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
    How id I get my single Windows license onto my new SSD HD?  Reload, clean install, ???
    How do I get the proper product key or confirm it is correct? 
    It is a new system with little data that I need to copy. I just want the operating system.  I have the driver disc that came with it.

  • How to Perform a "Clean Install" - Offline installer link not working...

    The thread containing - "How to Perform a Clean Install of Flash Player in Mac OS X" -  was an answer given by Mike M. several times in this forum. I attempted to access the "offline installer" link that was offered, but it does not seem to be working. Does anyone have an updated link to a functional offline installer that I can use to finally download Flash Player for Mac OS X v. 10.9.5?
    I receive an error message stating "Error: Unable to proceed with the installation."
    Many of the photography and game websites I use (almost all, actually) FP, and I would really love to get back to my daily routine soon!
    Best Regards,
    Mel R.

    Hi Mel,
    The correct link is posted at the bottom of the Installation problems | Flash Player | Mac page, in the 'Still having problems section'. The download links recently changed and it appears the FAQ was not updated.  I have updated the with the help page URL as it's less likely that this link will change, and if it does, a re-direct to the new location would be implemented.
    Maria

  • How to do a clean install go yosemite and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

    How to do a clean install of yosemite (have Mavericks 10.9.5 now) and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

    Do a backup before doing anything.
    If you want to make a clean install of Mountain Lion, boot into the Recovery Volume (command - R) on a restart, use Disk Utility to Verify/Repair  the disk and run Repair Permissions. Then erase the hard drive using Mac OS Extended (Journaled) format using the Options button. Reinstall Yosemite. Restart normally and test. Use Setup Assistant or Migration Assistant to import what you want.
    Clean Install

  • Clean install from Leopard to M. Lion on new disk

    I have a late 2007 MacBook Pro with 10.5.8 and a too small disk. I just purchased a 500GB internal disk. I'd like to do a clean install from Leopard to Mountain Lion using the new disk. What is the recommended procedure? I'd like to avoid the extra step of installing Snow Leopard first as documented.

    Well, I wouldn't do it that way, too many steps.
    I would:
    1. Clone your current drive to the external drive, instead of using Time Machine. (Carbon Copy Cloner or SuperDuper)
    2. Boot from your external drive, update it to Snow Leopard.
    3. Purchase and download ML from that external boot. Save a copy of the installer to a location other than the Applications folder, that way it won't be erased after you use it. (verify that you've made a copy and not just an alias)
    4. Install your new drive, format it.
    5. Boot from your external, run the ML installer, select your new empty internal as the install destination, when prompted, use Setup Assistant to migrate your data from the external to the internal.
    6. When done, you should have a fresh install of ML on your new internal and a bootable SL on your external as a backup. If you decide that you want to go back to SL, you can just erase the internal and clone the external back to the internal.
    Note: You don't need to make a bootable USB installer, they're too slow anyway. Just keep a copy of the ML installer on your external, bootable drive, so that you won't have to download it again.
    Another option: Since you're replacing the intrenal with a 500 Gig drive, you could partition it to two 250 Gig partitions. Put ML on one and SL on the other, i.e.,

  • How to do a clean install with lion after it is already installed?

    how to do a clean install with lion after it is already installed?

    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Restoring files ONLY from Time Machine on a clean install of Leopard

    Hi folks. I've seen variations of this asked but not quite the answer I'm looking for.
    I want to do a clean install of Leopard and want to restore only files from a TM backup (mp3's, photos, docs, etc.). I don't want to incorporate apps, system files or the user account from the TM backup. Just a fresh installation of OS X on which I can incorporate my files from a TM backup without having to worry about incorporating unwanted programs, hidden files and whatnot. I used to do this on Windows all the time but can't figure out a way of doing it on OS X. Thanks in advance for your suggestions!
    Jim

    j_kanaris wrote:
    What's user ID 501? So if I'm trying to import files from a TM backup and I have the same user ID, I won't be prompted to change it based on this method?
    you won't be prompted to change user ID but if the user IDs are different you'll be denied access to some folders (like the Documents folder) in your old home directory and won't be able to restore them. I presume the files you want to restore are there? this issue can be dealt with if it does arise but as I said if you only have one user on both computers this will not be an issue. just try it and see what happens.
    Message was edited by: V.K.
    Message was edited by: V.K.

  • HOW TO DO A CLEAN INSTALL IF I HAVE PURCHASED OPERETING SYSTEM ONLINE

    HOW TO DO A CLEAN INSTALL IF I HAVE PURCHASED MONUTAIN LION FROM THE ONLINE APPLE STORE AND THEREFOR I HAVENT GOT A CD ?
    Thank you

    Restart the computer with the Command and R keys held down and do it from there.
    (91755)

  • How can i download and install snow leopard 10.6 on my mac?

    how can i download and install snow leopard 10.6?

    If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    Snow Leopard General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMe service; fees and terms apply.

Maybe you are looking for