How to do a infrared picture with CS6 or am i using the wrong one

I just want to make a pic into a infrared what can i do to do this  and how thanks

https://www.google.com/search?num=100&newwindow=1&safe=off&rlz=1C1CHFX_enUS546US546&espv=2 &q=Photoshop+simulate+infrared…

Similar Messages

  • How can I sync my iPod with another iPod as I use the same iTunes account?

    I currently have an iPod Nano and want to go for an iPod Touch soon. My iPod Nano has a lot of iTunes music that I’d rather not have to pay for a second time. How can I get that music on to my new iPod without having to pay for it again?

    The best approach would be to register your new iPod to your current iTunes account then sync to the matching library much like your old one. You can learn more about BACKING UP and managing content simply by downloading and reading on your user guide.

  • How can you delete an app if it turned out it was the wrong one ?

    Hi,
    I bought an app and it is useless. Is there any way that I can get rid of it and get my money back?

    You may not be able to get your money back... But to Delete an App...
    Touch the app and hold your finger down until all the apps start to jiggle.
    You will see a circled "x" in the upper left corner.
    Tap it to delete an app.
    When done press the Home button.
    Mac Apps Store Customer Service
    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • How to Recover a Dark Picture with a Heavy Color Cast

    I just posted this article about how to recover a dark picture with a heavy
    color cast using Lab Color mode in Photoshop. I hope it will be helpful to
    others.
    http://www.braintrove.com/article/58
    Greg Collins
    Microsoft MVP
    Visit Braintrove at http://www.braintrove.com

    None taken. I am unfamiliar with ACR and would love to see (compare) what it
    could do with the sample PNG file in the article, and how much time it took.
    The results I achieved in the article took only a few minutes to
    complete--though as I mention below, it took more than a few minutes to get
    to the point where I could do it in a few minutes.
    I happened across a web site one day discussing the techniques in Margulis'
    LAB Color book, which interested me enough to purchase it. I found the book
    very enlightening and have seen incredible results using the techniques he
    describes as applied to my various images. I've also ready his Professional
    Photoshop book which focuses more on CMYK, and found many techniques in
    there just as enlightening.
    Ultimately the tools and techniques used are irrelevant if you get the
    results you want... but if you find one that works faster, easier or better,
    then certainly you should employ it.
    I have no problem working in RGB, CMYK or LAB and find benefits from each.
    The particular sample image I used in the article was one that I've spent
    (too much) time cleaning up in various ways and in various color spaces (or
    combinations thereof). It became my "poster child" image to work on as I
    continue to build my Photoshop skills. The approach I used in the article
    was the one I found most to be the fasted with the most effective results.
    The original was a 6MP JPG file. I reduced it to the size in the article and
    then worked on that size for the remaineder of the article. The resutls are
    equivelant in the fullsize file.
    Greg Collins
    Microsoft MVP
    Visit Braintrove at http://www.braintrove.com

  • When i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ?

    when i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ? is this normal ???

    You probably have a filter set for the normal camera mode but not the square.
    To fix, in Photo mode, touch the filter icon (three circles) and select None for the filter.

  • Infrared picture with high resolution

    I'm very familiar with LabVIEW programming, have set up a couple of applications with ordinary cameras, but have never worked with IR  before. Now I'm interested in a infrared picture with as high resolution as possible, and I don't really need a video-film, one picture every 10 seconds is probably more than good enough. What's out there on the market for anything like this ?
    Martin

    If by IR you mean thermal, high resolution and high cost are the norm.
    FLIR is probably the largest supplier.  you can get HD resolution from a FLIR SC8300, but the cost in $200K+.  The FLIR SC line typically have resolutions of 640x512, but they are cooled cameras, which is part of the reason why they are so expensive.
    On the lower end, still at around 640x480, you have the A615, around $20K, or the A65 at around $9K.  The A6x5/A3x5, and Ax5 series cameras all support GENiCAM, and work very well with NI Vision Development Module. 
    Machine Vision, Robotics, Embedded Systems, Surveillance
    www.movimed.com - Custom Imaging Solutions

  • How come when I send a picture with iPhoto email it always send the same picture event when I choose a different picture until I log out from iPhoto

    how come when I send a picture with iPhoto email it always send the same picture event when I choose a different picture until I log out from iPhoto

    Why? Because something is wrong.
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • 6720C :how disable flash when taking picture with ...

    hi,please how disable flash when taking picture with camera in 6720?

    when camera is open a list pops up here it is
    The toolbar provides you with shortcuts to different items and settings before and after capturing an image or recording a video clip. Select from the following: Switch between video and image mode.
    Select the scene.
    Activate panorama mode.
    Turn the video light on (video mode only).
    Select the flash mode (images only).
    Activate the self-timer (images only).
    Activate sequence mode (images only).
    Select a colour effect.
    Adjust the white balance.
    Go to Photos.
    scroll to flash and turn it off there
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • When i take a picture with my iphone and then forward the picture in an email (regardless of picture size) it will not send - any thoughts????? Thanks.

    When I take a picture with my iPhone and then forward the picture to an emaila ddress (regardless of picture size) it will not send the email with the pciture enclosed - any thoughts on how to fix ?????
    Thanks -

    The collum to the right listed similar problems.  The solution appears to be that under smtp outgoing settings the user name and password are listed as optional.  I have not plugged in the information and it seems to be working.  However from my office it always allowed the relaying.  The true test will be when I try to respond later from the road.
    Thank you for your help.

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • How do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

    how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

    Hi john,
    Yes, you would sign out of iTunes & App Store: Settings>iTunes & App Store, click on the Apple ID, click on Sign Out. Then sign back on with the new Apple ID. Also, if you have an iCloud account with the other Apple ID, you would delete that iCloud account, and then sign on with your new ID: Settings>iCloud>Delete Account.
    Cheers,
    GB

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one?  If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

    Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one?  If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

    Follow the instructions in this article to transfer your info: iPhone: Transferring information from your current iPhone to a new iPhone

  • How can i pin a picture so that it is responsive like the boxes in muse and not stays static?

    I want to include a reponsive picture in muse but dont know how to make it.
    Thanks for help-

    I am not really sure, if I understand you right. But try this:
    Don’t place a picture, but draw a box and use the "Fill" command to put a picture into it.
    (Don’t click onto the color swatch, but onto the blue link "Fill".)
    In this case responsivness should work.

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

Maybe you are looking for