How to do a presentation with a revolving globe and with flightpaths?
Hello all! Well, as the subject line says. I'm doing a geography lesson at a school and would love to be able to show a spinning/revolving Earth with perhaps red lines showing the flight paths taken on a particular trip. I've got iMovie, Keynote, FCP etc - all the right software, but no clues as to how this can be done relatively easily.
Open to ideas! Many thanks in advance.
Cheers
Chris
iMovie has the "Indiana Jones" effect. On the iMovie screen on the far right-center you should see a line of buttons, of of which is sphere. Click on that and choose your to/from locations and the map fo your choice.
Once that is put together, you can share the movie onto your disk or through iTunes and import the movie into Keynote.
Similar Messages
-
VF11 wrongly created with RV Doc type and with not clear status.
Hi All
Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing types) and it is in not clear status.
2 Sales order types are ZNRC(No Rebate u2013 Credit) second is ZCR (CM Req With Refer).
Order Type : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
Order type: ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.
FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
I reviewed similar issues with SAP Note and with below explanation:
"There are 2 procedures that are possible when Vf11 is posted.
Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
New Procedure - A Real FI reversal was carried out with clearing."
In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
Appreciate your answers or suggestions.
Thanks in advance,
Sunil
Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PMThank you Ivano.
I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
Thread is closed.
Sunil -
Customer/Vendor A/C with line item details and with opening and closing Bal
Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balancesHello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah -
Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store and now my account stoped with reason owe ..
You can ONLY use the itunes store of your country of residence ( proven by the billing address on your credit card) AND ONLY while you are physically located inside the borders of that country.
You would have to live in the U.S and physically be located in the U.S in order ot use the U.S tunes store. The same is true for each countrys itunes store. -
Time Zone Conversion with out using function and with out alter
Hi All,
I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface) date field was stored in BST format but DB time zone is in GMT format so can any one help me to find a solution for 1 hr difference, here i don't have Privileges to alter DB time zone and i couldn't use function as i have so many SQL's and can't apply that function manually. SO is there any other option to change the DB time zone with out alter it and with out using function.
Thank you Very Much.Hi,
you need to set time zone in your session, let's do an example :
alter session set nls_date_format='DD/MM/YYYY HH24:MI:SS';
CREATE TABLE USERA.T
SDATE DATE DEFAULT sysdate,
WITHOUT_TZ TIMESTAMP(6) DEFAULT sysdate,
WITH_TZ TIMESTAMP(6) WITH TIME ZONE DEFAULT sysdate,
WITH_LZ TIMESTAMP(6) WITH LOCAL TIME ZONE DEFAULT sysdate
insert into USERA.T(sdate) values(sysdate);
commit;
select * from USERA.T;
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-11.04.23.000000
SQL> alter session set TIME_ZONE ='-7:0';
Session altered.
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-04.04.23.000000 -
what is the name of that thing that appears before a film, in black and white, with numbers counting backwards and with circle motion ?
Thanks a lot, not only I got what I needed, but also discovered a great site
thanks
fp -
I have a MacBook with no more guarantee and with Mac OSX 10.5.8. There some sites which do not accept this version . I tried to update with no success. What do I have to do?
Hi, which sites Andrea?
You might update...
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
And it's been reported that if you have a MobileMe account Apple will send one free. -
Can we Purchase with Secondary UOM Quantity and with Secondary UOM Price on
Friends..
wanna ask about Purchasing matters..
we have item with Dual Unit of Measure, say it with Kilogram and Pieces,
now, on Purchase Orders Form, when i enter my order,
TOTAL Price is driven by Primary QUANTITY multiply PRICE.
My question:
when user would like to purchase with SECONDARY UOM, how oracle handle it?
i mean, when i try to locate secondary quantity,Total Price is still driven
by Primary QUANTITY (which is already autoconvert after i enter secondary quantity)
multiply PRICE.
is there any advanced setup to do this?
if not user have to manual calculate the Price converted to Primary Quantity,
when user purchase base on secondary Quantity.
really appreciate your helpHi
I think you can try "Adv Pricing Integration with Purchasing" for diff UOM with diff Price.
But what you are seeing is the Standard functionality as per Oracle. I faced similar kind of issue and got a reply from SR like that.
Regds
Ravisankar -
I need help my Ipod is stuck and I cant do anything at all. my screen shows the I tunes symbol with an arrow under it then under that is the chanrger. I have tried everything and it does notthing. Can someone please help.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
For the future saying " I have tried everything " provides zero information as to what you tried. -
How to export multiple copies reoprts based on parameters and with pre-defined naming
Hi All:
I have a problem of using SSRS 2012, we have multiple clients and they wanted us to deliver the pre-defined excel reports to different branches based on selecting the "branch name" parameter, also they have a naming rule for the excel
report file.
We cannot use the subscription as they need to do it in one batch and upload to an FTP file, therefore we are doing this manually for over 300 reports. Is this a convenient way to generate them in one batch as well as customising their file names?
Thanks a lot for your help.
Cheers
JohnnyHi JohnnyKahWang,
As per my understanding, there are multiple clients, you want to deliver reports to clients according to branch name parameter, and naming the excel file according to the rule. If that is the case, we can use data-driven subscription to achieve your goal.
Reporting Services provides data-driven subscriptions so that you can customize the distribution of a report based on dynamic subscriber data. Data-driven subscriptions use query results to determine the recipients of the subscription, delivery settings,
and report parameter values. At run time, the report server runs a query to get values used for subscription settings. We can use the Create Data-driven Subscription pages to define the query and assign query values to subscription settings. For detail information,
please refer to the following steps:
1. Open Report Manager, and locate the report for which you want to create a data-driven subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Data-driven Subscription.
5. Choose a method of delivery, then select data source for the subscription.
6. Specify a query that retrieves subscriber data like below:
CREATE TABLE Name (
BranchName varchar(20),
ExcelFileName varchar(20),
Email_to varchar(50)
INSERT INTO Name values
('Branch1', 'Name1', '[email protected]'),
('Branch2', 'Name2', '[email protected]'),
('Branch3','Name3', '[email protected]');
IF we chose Windows File Share delivery extension, we can define path in the query.
7. Specify delivery extension options like below:
8. Specify report parameters to BranchName.
9. Specify when the subscription is processed, then click Finish to save the configuration.
For more information about Data-driven Subscription, please refer to the following documents:
http://msbimentalist.wordpress.com/2013/08/26/how-to-create-data-driven-subscription-in-ssrs/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu -
Problems with writing to file, and with ActionListener.
I have been trying to write a Payroll Division type program as my school Computer Science Project. However, I have a few problems with it...
import java.io.IOException;
import java.io.FileOutputStream;
import java.io.FileInputStream;
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.util.StringTokenizer;
import javax.swing.*;
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.GridLayout;
import java.awt.event.*;
public class Personnel implements ActionListener {
JFrame GUIFrame;
JLabel ID, Line, OKText,AnswerField;
JTextField IDField, LineField;
JButton OK;
JPanel GUIPanel;
int trialCounter=0;
final static int employeeNumber = 7;
final static int maxValue = ((employeeNumber*4)-1);
//Number of employees, which would be in real life passed by the Payroll division.
public static String [][] sortHelp = new String [employeeNumber+1][3]; /** Creates a new instance of Personnel */
public Personnel() {
GUIFrame = new JFrame("PersonnelSoft"); //create title header.
GUIFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
GUIFrame.setSize(new Dimension(100, 140));
GUIPanel= new JPanel(new GridLayout(2, 2));
addWidgets();
GUIFrame.getRootPane().setDefaultButton(OK);
GUIFrame.getContentPane().add(GUIPanel, BorderLayout.CENTER);
GUIFrame.pack();
GUIFrame.getContentPane().setVisible(true);
GUIFrame.setVisible(true);
private void addWidgets() {
ID = new JLabel ("Please enter your employee Identification Number:", SwingConstants.LEFT);
IDField = new JTextField ("ID", 5);
Line = new JLabel ("Please enter the line of your payroll with which you have concerns:", SwingConstants.LEFT);
LineField = new JTextField ("###", 2);
OKText = new JLabel ("Click OK when you have verified the validity of your request", SwingConstants.LEFT);
OK = new JButton ("OK");
OK.setVerticalTextPosition(AbstractButton.CENTER);
OK.setMnemonic(KeyEvent.VK_I);
AnswerField = new JLabel("The Result of your Querie will go here", SwingConstants.LEFT);
GUIPanel.add(ID);
GUIPanel.add(IDField);
GUIPanel.add(Line);
GUIPanel.add(LineField);
GUIPanel.add(OKText);
GUIPanel.add(OK);
GUIPanel.add(AnswerField);
OK.addActionListener(this);
ID.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
OKText.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
Line.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
public static void ArrayCreate() throws IOException {
//creates a employeeNumber x 3 array, which will hold all data neccessary for future sorting by employee ID number.
int counter = 2;
int empCounter = 1;
String save;
//avoid having to waste memory calculating this value every time the for loop begins
FileInputStream inFile = new FileInputStream("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR.txt");
BufferedReader in = new BufferedReader(new InputStreamReader(inFile));
String line;
line = in.readLine();
StringTokenizer st = new StringTokenizer(line);
save = st.nextToken();
sortHelp[0][0] = save;
sortHelp[0][2] = save;
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[0][1] = save;
while (counter <= maxValue) {
line = in.readLine();
if (((counter - 1) % 4) == 0) {
st = new StringTokenizer(line);
sortHelp[empCounter][0] = st.nextToken();
sortHelp[empCounter][2] = sortHelp[empCounter][0];
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[empCounter][1] = save;
empCounter++;
counter++;
public static String[] joinString() {
String[] tempStorage = new String[employeeNumber+1];
int counter;
for (counter = 0; counter <= employeeNumber; counter++) {
tempStorage[counter] = (sortHelp[counter][1] + sortHelp[counter][0]);
return (tempStorage);
public static String[] sortEm(String[] array, int len)
java.util.Arrays.sort(array);
return array;
public static void splitString(String[] splitString){
int counter;
for (counter = 0; counter <= employeeNumber; counter++){
sortHelp[counter][0]=splitString[counter].substring( 5 );
sortHelp[counter][1]=splitString[counter].substring(0,5);
void setLabel(String newText) {
AnswerField.setText(newText);
void writetoHR(String local) throws IOException {
FileOutputStream outFile = new FileOutputStream ("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR2.txt");
BufferedWriter out = new BufferedWriter(new OutputStreamWriter(outFile));
out.write(local+"the preceding employee number is not in our database, but has submitted a request. Please sort out the issue");
System.exit(0);
public void actionPerformed(ActionEvent e){
boolean flag=false;
String local=IDField.getText();
int i=0;
while((i<=employeeNumber)&&(flag==false)){
if (sortHelp[1]==local) {
flag=true;
i++;
trialCounter++;
if (trialCounter>=3)
writetoHR(local);
if (flag==false)
setLabel("Your ID number does not exist in our records. Verify your ID and try again.");
else {
switch (LineField.getText())
case 04:
setLabel("Your pay is calculated by multiplying your working hours by the amount per hour. If both of these fields are satisfactory to you, please contact humanresource");
break;
case 03:
setLabel("Hourly amount was calculated by the system, by dividing your yearly pay 26 and then 80.");
break;
case 07:
setLabel("Overtime pay was calculated by multiplying regular hourly pay by 1.1");
break;
case 06:
setLabel("The overtime hourly pay was multiplied by the amount of overtime hours.");
break;
case 10:
setLabel("For holiday hours, your pay is increased by 25%.");
break;
case 09:
setLabel("The holiday hourly pay was multiplied by your amount of holiday hours.");
break;
case 11:
setLabel("Your total pay was calculated by adding all the separate types of payment to your name.");
break;
case 17:
setLabel("Your net pay was found by subtracting the amount withheld from your account");
break;
case 19:
setLabel("Your sick hours remaining were taken from a pool of 96 hours.");
break;
default:
setLabel("Please contact humanresource.");
break;
private static void CreateAndShowGUI() {
JFrame.setDefaultLookAndFeelDecorated(true);
Personnel GUI = new Personnel();
public static void main(String[] args) throws IOException {
String[] temporary = new String[employeeNumber];
ArrayCreate();
temporary = joinString();
temporary = sortEm(temporary, employeeNumber);
splitString(temporary);
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
CreateAndShowGUI();
int row;
int column;
for (row = 0; row < (employeeNumber); row++) { // verify proper output by ArrayCreate splitString
for (column = 0; column <= 2; column++) {
System.out.print(sortHelp[row][column]);
System.out.print(' ');
System.out.print(' ');
System.out.println();
1) It does not permit me to switch on a String. How do I solve that?
2)How would I throw an exception (IO) within actionperformed?
3)Generally, if cut it down to everything except the writing to a file part, the actionperformed script causes an error... why?
Thanks in advance.
And sorry for the relative lameness of my question...
---abe---Thank you very much. That did solve almost all the problems that I had...
I just have one more problem.
First (here's the new code):
import java.io.IOException;
import java.io.FileOutputStream;
import java.io.FileInputStream;
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.util.StringTokenizer;
import javax.swing.*;
import java.util.*;
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.GridLayout;
import java.awt.event.*;
public class Personnel implements ActionListener {
JFrame GUIFrame;
JLabel ID, Line, OKText,AnswerField;
JTextField IDField, LineField;
JButton OK;
JPanel GUIPanel;
int trialCounter=0;
final static int employeeNumber = 7;
final static int maxValue = ((employeeNumber*4)-1);
public static String [][] sortHelp = new String [employeeNumber+1][3];
public Personnel() {
GUIFrame = new JFrame("PersonnelSoft"); //create title header.
GUIFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
GUIFrame.setSize(new Dimension(100, 140));
GUIPanel= new JPanel(new GridLayout(2, 2));
addWidgets();
GUIFrame.getRootPane().setDefaultButton(OK);
GUIFrame.getContentPane().add(GUIPanel, BorderLayout.CENTER);
GUIFrame.pack();
GUIFrame.getContentPane().setVisible(true);
GUIFrame.setVisible(true);
private void addWidgets() {
ID = new JLabel ("Please enter your employee Identification Number:", SwingConstants.LEFT);
IDField = new JTextField ("ID", 5);
Line = new JLabel ("Please enter the line of your payroll with which you have concerns:", SwingConstants.LEFT);
LineField = new JTextField ("###", 2);
OKText = new JLabel ("Click OK when you have verified the validity of your request", SwingConstants.LEFT);
OK = new JButton ("OK");
OK.setVerticalTextPosition(AbstractButton.CENTER);
OK.setMnemonic(KeyEvent.VK_I);
AnswerField = new JLabel("The Result of your Querie will go here", SwingConstants.LEFT);
GUIPanel.add(ID);
GUIPanel.add(IDField);
GUIPanel.add(Line);
GUIPanel.add(LineField);
GUIPanel.add(OKText);
GUIPanel.add(OK);
GUIPanel.add(AnswerField);
OK.addActionListener(this);
ID.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
OKText.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
Line.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
public static void ArrayCreate() throws IOException {
int counter = 2;
int empCounter = 1;
String save;
FileInputStream inFile = new FileInputStream("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR.txt");
BufferedReader in = new BufferedReader(new InputStreamReader(inFile));
String line;
line = in.readLine();
StringTokenizer st = new StringTokenizer(line);
save = st.nextToken();
sortHelp[0][0] = save;
sortHelp[0][2] = save;
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[0][1] = save;
while (counter <= maxValue) {
line = in.readLine();
if (((counter - 1) % 4) == 0) {
st = new StringTokenizer(line);
sortHelp[empCounter][0] = st.nextToken();
sortHelp[empCounter][2] = sortHelp[empCounter][0];
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[empCounter][1] = save;
empCounter++;
counter++;
public static String[] joinString() {
String[] tempStorage = new String[employeeNumber+1];
int counter;
for (counter = 0; counter <= employeeNumber; counter++) {
tempStorage[counter] = (sortHelp[counter][1] + sortHelp[counter][0]);
return (tempStorage);
public static String[] sortEm(String[] array, int len)
java.util.Arrays.sort(array);
return array;
public static void splitString(String[] splitString){
int counter;
for (counter = 0; counter <= employeeNumber; counter++){
sortHelp[counter][0]=splitString[counter].substring( 5 );
sortHelp[counter][1]=splitString[counter].substring(0,5);
void setLabel(String newText) {
AnswerField.setText(newText);
void writetoHR(String local) throws IOException {
FileOutputStream outFile = new FileOutputStream ("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR2.txt");
BufferedWriter out = new BufferedWriter(new OutputStreamWriter(outFile));
out.write(local+"the preceding employee number is not in our database, but has submitted a request. Please sort out the issue");
System.exit(0);
public void actionPerformed(ActionEvent e){
boolean flag=false;
String local=IDField.getText();
local trim();
int i=0;
while((i<employeeNumber)&&(flag==false)){
if (sortHelp[1]==local) {
flag=true;
else {
i++;
trialCounter++;
if (trialCounter>=3)
try {
writetoHR(local);
} catch (IOException exception) {
setLabel("We are sorry. The program has encountered an unexpected error and must now close");
} finally {
if (flag==false)
setLabel("Your ID number does not exist in our records. Verify your ID and try again.");
else {
final Map m = new HashMap();
m.put("04","Your pay is calculated by multiplying your working hours by the amount per hour. If both of these fields are satisfactory to you, please contact humanresource.");
m.put("03", "Hourly amount was calculated by the system, by dividing your yearly pay 26 and then 80.");
m.put("07", "Overtime pay was calculated by multiplying regular hourly pay by 1.1");
m.put("06", "The overtime hourly pay was multiplied by the amount of overtime hours.");
m.put("10", "For holiday hours, your pay is increased by 25%.");
m.put("09", "The holiday hourly pay was multiplied by your amount of holiday hours.");
m.put("11", "Your total pay was calculated by adding all the separate types of payment to your name.");
m.put("17", "Your net pay was found by subtracting the amount withheld from your account.");
m.put("19", "Your sick hours remaining were taken from a pool of 96 hours.");
setLabel(m.get(LineField.getText()));
private static void CreateAndShowGUI() {
JFrame.setDefaultLookAndFeelDecorated(true);
Personnel GUI = new Personnel();
public static void main(String[] args) throws IOException {
String[] temporary = new String[employeeNumber];
ArrayCreate();
temporary = joinString();
temporary = sortEm(temporary, employeeNumber);
splitString(temporary);
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
CreateAndShowGUI();
int row;
int column;
for (row = 0; row < (employeeNumber); row++) { // verify proper output by ArrayCreate splitString
for (column = 0; column <= 2; column++) {
System.out.print(sortHelp[row][column]);
System.out.print(' ');
System.out.print(' ');
System.out.println();
Now that code above produces two errors. First of all.
local trim();produces the error:
Syntax error, insert "AssignmentOperator ArrayInitializer" to complete ArrayInitializerAssignementSecondly, if I take that into comments, the line
setLabel(m.get(LineField.getText()));Produces the error:
The method setLabel(String) in the type Personnel is not applicable for the arguments (Object)If anybody could help me solve these, I would be sincerely thankfull.
Now, before anybody asks as to why I want to trim the String in the first place, it is due to the fact that I compare it to another String that is without whitespaces. Thus the field that DOES have whitespaces was preventing me from launching into the if loop:
if (sortHelp[1]==local) {
flag=true;
(within actionperformed) Or at least that's my explanation as to why the loop never launched. If it is wrong, can somebody please explain?)
I apologize for the horrible indentation and lack of comments. This is an unfinished version.. I'll be adding the comments last (won't that be a joy), as well as looking for things to cut down on and make the program more efficient.
Anyways,
Thanks in Advance,
---abe--- -
Latest Firefox 4 beta 6.
nVidia GT240 1GB DDR3 with driver version 258.96.
Windows 7 Ultimate.
If I have plenty of tabs opened, in Firefox 4 beta 6 with hardware acceleration enabled, using the Windows 7 Taskbar preview feature (that will show all the tabs Firefox has loaded) will cause the Nvidia display driver to crash. When this happen, the GUI part of Firefox will be unusable and has to be killed via Task Manager.
This doesn't happen if hardware acceleration is disabled.It is beta software and the older 4.0 b6 version may not work with all display drivers.
You can trey the test extension: http://jagriffin.wordpress.com/2010/08/30/introducting-grafx-bot/ -
My sound is not working with the computer speakers and with headphones, help?!
my sound is not working with my headphones or the the computer speakers
You indicate you have a "brand new Air", you have a 14 day exchange, and the warranty of which you paid for regarding genius bar in-shop diagnostics (and repair if necessary)
What year model Air do you have?
On the first question,....are the headphones attached when you have your Air in sleep?
If yes, then refrain from having phones attached when you close the monitor to prevent this until it is resolved
resolution as to same yet, no. -
X220 Trackpad curser movement with Ethernet plugged in and with VGA connected to projector
Thre are many issues discussed about trackpad problem. My problem comes in the trackpad when X220 is connected to Ethernet port. The curser is not stable and it jumps aout 1/2 cm right and left withlout any figer movement, It vibrates on its own when only finger is placed on the touchpad. This does not happen when Ethernet port is diconnected even with 90w adapter or 65w adapter plugged in. It comes with Ethernet only.
The same preoblem comes again when VGA port is connected to Projector. In my case problm has no affect with any power adapter.(90 or 65 w) plugged in.
This is so problametc that simple tasks of selection is delayed or wrong selection is made.
Need Help/Solution anyone.
Thanks,
Installed all latest drivers availabe end March 1012 along with trackpad driver (15.3.39.1)
Model ThinkPad X220 (4286-CTO)
Core i7 2.8 Ghz
8 GB RAM
160 GB Intel SSD
Finger Print Reader
HD Camera, 720p
Intel Centreno Advance N 6205 (2x2 Antenna) WiFi
IPS Display
~
HaiderHello Haider1223 and welcome to Lenovo community,
You have already updated all the system drivers, usually updated driver version of UltraNav resolve the issue.
Kindly update the BIOS and check if the issue gets resolved.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj15us.exe
If the issue continues then you need to reinstall the Operating System.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
the itunes sharing is not giving me access to my entire library on my iphone 5, but is fine on my apple tvs, any suggestions
iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes
Maybe you are looking for
-
LDAPRealm authentication (almost there)
Ok, been chipping away at getting an LDAPRealmV2 to function properly, thanks for all the tips. Vital stats -- Iplanet dir service 6.02, weblogic 6.1, win2k. config.xml is properly set, and I think web.xml is as well but I get an authentication box t
-
How do i play podcast in order
can anyone help me out.. im new to the whole podcasting thing but im loving it ok its just one problem ... being a noob to this try not to laugh ok but i cant seem to listen to my podcast in order from old to new i have a 5 gen ipod (black). is there
-
Copy teammembers and keywords from template to implementation project
Hello All, When adding structure elements (business scenarios, etc) from a template project to an implementation project, the data on the administration tab is not copied with it. When selecting a specific scenario from the template we need to be abl
-
Change font size after installing OS X
After installing Snow Leopard OS X 10.6.3 all my fonts (top row, Apple menu, Safari, iCal, iTunes, et al. et al.) are very small font (10 point at best). I have manually increased font in Address Book and Mail, but cannot find the solution for other
-
Multiple SAP R3 Source System in BI
Dear Gurus, Here's my scenario, I've SAP ECC Development Source System connected to my SAP BI Development Server system. Now my Question is , 1.We also have SAP ECC IDES system client 800 and therefore would like to connect this SAP ECC IDES system