How to do a programmatic login in a server context

Hello,
How to do a programmatic login in a server context?
How can the current authenticated user, if any, be substituted by another in the middle of a request, in a save pipeline, eg?
Regards.
-- Nuno

I don't know of a way to do exactly what you are asking. However, when I had your requirement I elevated the current user to the permission of an administrator who had the ability to perform any configuration desired.
The only other reason I could think you need to be a specific user is so that the logs would indicate that the action was performed by a specific user.
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

Similar Messages

How do I fix this: "Login Failure: Failed Server Lookup"?

I have an iPod Touch 4G, and I'd like to use my Firefox settings from my computer on the iPod. First it said that the Sync Key was incorrect. After getting a new one, I'm now getting the message noted in the question.
I don't ''think'' it's a WiFi issue because both my computer and the iPod are connected to the home internet right now without any problems. This means I'm at a loss, however, because I can't think of any other reason I'd be getting this. I know I'm using the correct username and password, I know the sync key is correct...
Also, I get this same message when I enter the sync key manually in the ap on my iPod. So what's going on?

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Create a login page with NI Security Programmatic Login.vi

Hi everyone,
I'm trying to create a login page that inputs username and password of users, then authorize user information with the Domain Account Manager to recognize user identification.
I google and see the NI Security Programmatic Login.vi can allow me to create a login page and it works. However, I got a problem is to redirect to other pages after authorizing.
NI Security Programmatic Login.vi only outputs some string to show the status of the authentication, it doesnt output boolean like true or fall.
Does anyone has a solution to help me?
Thank you.
This is my screen shot:

Thank you for suggesting me. I've done the checking task but I don't know how to call a subVi.
As you can see in the images I post below, I have a login page with its diagram, and the main page that I want to show after logging in conrrectly.
So should the main page is the subVi or the login page? And can you tell me how to show the main page after logging correctly?
I also don't know how to refresh the page if logging information is incorrect. Do you have any solution?
Thank you so much.

How do I apply programmatic skins for completely custom drawn components of a Flex library project?

Hello folks,
I am looking for best practices advice when (1) creating
custom components and (2) styling and skinning.
I already know how to skin a component part of the Flex
framework. I can make a class extending ProgrammaticSkin and have
my component skinned using CSS to link the component with the
reference to my custom class.
However what about those cases when you are completely
creating a component from scratch?
Imagine a "Freehand Drawing Canvas" component that allows the
user to draw on it and has some buttons to set color styles, line
styles, etc., or imagine a "Screen Flow Gallery" component that
displays visual objects in a fashion similar to Cover Flow in the
Mac.
In many components I am aware you may reuse other components
part of the Flex framework but I am trying to picture an scenario
where you would need to draw everything yourself because there just
isn't something to base it upon so you will end up drawing it from
scratch.
To learn how instead of building one of those components I
mentioned previously I decided to start with something simple that
would illustrate this like a LiteButton component that will behave
just like the Flex mx.controls.Button but will extend UIComponent
and be completely custom drawn.
The component will have a default look and will also be
style-able and skin-able. I will provide styles for users of the
component to modify and regarding skinning anyone can create a
custom ProgrammaticSkin adding its own drawing logic and link it to
the component via CSS with the ClassReference applied to the skin
selector.
So far so good and it's clear what I want to achieve. I
actually know how to do most of the stuff here but I have one
single problem.
Here is my question, where should I put my custom drawing
logic? If I do it in the updateDisplayList inside the class
extending UIComponent it works, however I thought that it would be
a better practice to do it using programmatic skins, that way I
could provide different skin themes for my component set.
The problem is that I can't make the programmatic work in
this scenario. I tried instantiating the custom programmatic skin
during the updateDisplayList of the LiteButton component and adding
it to my display object via addChild but that didn't do anything. I
also tried creating a "default.css" stylesheet and tried to use
ClassReference as I would normally do to skin an already existing
component (or composite component as well) but that didn't do
anything either.
So how do I apply programmatic skins for completely custom
drawn components of my Flex library project?
I could do it inside the updateDisplayList of the LiteButton
class extending UIComponent but again I would like to provide
different theme sets for my components so it makes sense using
programmatic skins.

"jbucaran" <[email protected]> wrote in
message
news:[email protected]...
> Hello folks,
>
> I am looking for best practices advice when (1) creating
custom components
> and
> (2) styling and skinning.
>
> I already know how to skin a component part of the Flex
framework. I can
> make
> a class extending ProgrammaticSkin and have my component
skinned using CSS
> to
> link the component with the reference to my custom
class.
>
> However what about those cases when you are completely
creating a
> component
> from scratch?
>
> Imagine a "Freehand Drawing Canvas" component that
allows the user to draw
> on
> it and has some buttons to set color styles, line
styles, etc., or imagine
> a
> "Screen Flow Gallery" component that displays visual
objects in a fashion
> similar to Cover Flow in the Mac.
>
> In many components I am aware you may reuse other
components part of the
> Flex
> framework but I am trying to picture an scenario where
you would need to
> draw
> everything yourself because there just isn't something
to base it upon so
> you
> will end up drawing it from scratch.
This may help with that
http://livedocs.adobe.com/flex/3/html/help.html?content=skinstyle_3.html
> To learn how instead of building one of those components
I mentioned
> previously I decided to start with something simple that
would illustrate
> this
> like a LiteButton component that will behave just like
the Flex
> mx.controls.Button but will extend UIComponent and be
completely custom
> drawn.
>
> The component will have a default look and will also be
style-able and
> skin-able. I will provide styles for users of the
component to modify and
> regarding skinning anyone can create a custom
ProgrammaticSkin adding its
> own
> drawing logic and link it to the component via CSS with
the ClassReference
> applied to the skin selector.
>
> So far so good and it's clear what I want to achieve.
Actually after
> playing
> with the weekend and today I know how to do most of the
stuff but I have
> one
> single problem. So here is my question, where should I
provide my custom
> drawing logic? If I do it in the updateDisplayList
inside the class
> extending
> UIComponent it works, however I thought that it would be
a better practice
> to
> do it using programmatic skins, that way I could provide
different skin
> themes
> for my component set.
These aren't mutually exclusive. When you provide a skin with
a
TypeSelector, you have to add it to the display list
somewhere, and this is
typically done in updateDisplayList or addChildren. I prefer
to do it in
updateDisplayList, because you can then change it if the
style changes.
> The problem is that I can't make the programmatic work
in this scenario. I
> tried instantiating the custom programmatic skin during
the
> updateDisplayList
> of the LiteButton component and adding it to my display
object via
> addChild but
> that didn't do anything.
Exactly what did you do?
> I also tried creating a "default.css" stylesheet and
> tried to use ClassReference as I would normally do to
skin an already
> existing
> component (or composite component as well) but that
didn't do anything
> either.
I've never had any problem using an approach similar to
this...but I will
say that I couldn't see any advantage in creating a
default.css style sheet,
since it's not really default in the way that the one that
comes with Flex
is. It's much more obvious to anyone using your component
what's going on
there if you create a style sheet where they're likely to
spot it.
> So how do I apply programmatic skins with the default
look for custom
> drawn
> components?
It seems like your approach is fine, but maybe you've made a
mistake in your
implementation.
> I could do it inside the updateDisplayList of the
LiteButton class
> extending
> UIComponent but again I would like to provide different
theme sets for my
> components so it makes sense using programmatic skins.
You might want to consider also adding an instance of
HaloBorder to your
component. That brings a lot of functionality with it.
HTH;
Amy

How can I get all Login/Logout details

How can I get all Login/Logout details of all SAP Users from SAP Server/Database of any one year? I am asking about SAP License User. Is their any Table or Report by which I can get these details? For example USR02(Logon Data) Table store the last login/logout details of SAP Users. So in same way is any table which store Users Login/Logout details through out a year or month.

Hi Sudheer,
Check this .
You can find the transactions by a particular user from the transaction SM04.
SM04 gives you the details of the users logged in,terminals,transactions the user is working on, the time he has logged in,no of sessions user has opened, and the memory used by the user's programs... all of that w.r.t to the client we login. but we can't get info like date and number of times the user has logged in.
U can see tables:
USR01 User master record (runtime data)
USR02 Logon data
USR03 User address data
USR05 User Master Parameter ID
USR12 User master authorization values
plz rewards points if helpful
cheers
srinivas.k
Edited by: k srinivas on Apr 28, 2008 11:54 AM

How to change the Default login script and the USER login script in Netware3.12

I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
please tell me
how to change the Default login script and the USER login script in
Netware3.12 ?
Or is there any other ways to do this thing?
Thanks a lot!

On 4/6/2006 [email protected] wrote:
> how to change the Default login script and the USER login script in
> Netware3.12 ?
Please repost in the discontinued.forums.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

How to change the default login user id for firefox home?

I need to enter a login id to open a firefox page. Unfortunately, I made an error on the login id. How to change this default login ID to open a Firefox home page?

sheldonidx wrote:
Can this be modified to change the underscore to a period?No.
I'm not sure if this is possible because it looks like the XML refers to compiled Java classes. Correct. A similar request has been discussed before:
http://forums.sun.com/thread.jspa?messageID=10626873#10626873
Regards,
Shane.

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

How to switch off re-login???

Hi.
In Layout of BSP-Page I show an image off Business Document Server (Smart Form Object):
<IMG SRC="/sap/bc/smart_forms/gr/graphics/bmap/bcol/TEST1.bmp">
In Browser the user just see the image when he logs in one more time. But he is already logged in. When choosing "cancel", the image will not be shown. How to prevent the second login? Did some service-options to be changed?
Thank you for answering.

sorry, wasn't the right Forum...

How to Bypass Windows 7 Login Screen When Forgot Admin Password

When forgot Windows 7 administrator login password and be stuck at the login screen what can you do? Believe that many people have encountered such a situation where they are locked out of their own computer for forgotten Windows administrator password. So today I would like to talk about several tricks on how to bypass Windows 7 login screen when forgot administrator login password. Trick 1: Reset Windows 7 admin password with password reset diskIf you have ever created a Windows password reset disk for that administrator account before you forgot its password it is easy to use it to reset or remove its password. Just insert the disk into your locked Windows 7 computer and click ¡°Reset Password¡± link on the login screen. Then follow the password reset wizard to perform password reset. This is the easiest way to bypass a Windows login screen when forgot administrator password. Trick 2: Change Windows 7 admin password in Safe ModeIf you have no password reset disk you have to look for other tricks to bypass your Windows 7 administrator password. So if you have enabled the built-in administrator account you can enter Safe Mode by pressing F8 when your computer is booting. And access that built-in administrator account to change other user password. Trick 3: Bypass Windows 7 Login screen with Windows Password RescuerIf the forward 2 tricks don't work, it is necessary for you to use an effective Windows Password Recovery tool like Daossoft Windows Password Rescuer. Steps are as below.Step 1: Download and install Daossoft Windows Password Rescuer into another accessible computer.Step 2: Launch this tool and follow its instruction to burn it to a USB/CD/DVD flash drive.Step 3: Boot your locked Windows 7 computer from the flash drive.Step 4: Follow its instruction to reset/remove your Windows administrator password. Detailed video tutorial :How to Remove or Bypass Windows 7 Administrator Password - Forgot Windows 7 Administrator Password

The methods above don't work at all. Eventually I used a paid tool - PCUnlocker Live CD, and it successfully bypassed my lost admin password.

How to change an after login page?

Does anyone knows how to change an after login page from a default page 1 to, let's say page 200?

Jessica,
The URL to run your application is http://apex.oracle.com/pls/otn/f?p=23533.
If you use this, page 3 is the first page shown after login.
Using the URL you gave runs the Application Builder, not your application. If you use the Builder's Run Application icon to run your application, the page in your application that you are requesting is page 1 (or whatever is in the application's Home URL attribute). But running your application this way is something you do in a development environment only
Your basic question has to do with how end users would get to a particular after-login page. End users do not have access to the Application Builder.
Scott

How do I customize the login page?

Hi, floks:
How do I customize the login page?
Can I just create a page with login portlet in it? what do I put as on Success URL,
if I choose to go to the home page?
thanks.
null

You can create a page and add a login portlet to it.Make it accesible to public.
change the default page of the user "public" to the page you have created.(by default it is WELCOME)
if there is an error in the user name or the password entered the portal still navigates to the default single-sign on page.(You have not changed the sign on page still)
To change this page look at on-line help.
search with string "customize" in online help
null

How to create an Apex 3.1 a session context programmatically?

Hi
I want to do some unit testing on some pl/sql procedures that use apex collections. As I am using PL/SQL Developer and I am not connected to the database via Apex, inevitably they fail with the error "invalid parsing schema for the current workspace ID".
How can I create programmatically a session in Apex so I can unit test my code? I am sure I have seen code to do it, but cannot find it anywhere.
Thanks
Luis

Scott
Thanks for the help!
You say "uncomment the last line if you need to". How do I know if I need to? If the connected user is different from the application parsing schema?
In any case, the connect user is the same as the app parsing schema, and when I ran it without uncommenting that last line I got the error:
ORA-20104: create_collection_from_query_b Error:ORA-20001: Invalid parsing schema for current workspace ID
ORA-06512: at "FLOWS_030100.WWV_FLOW_COLLECTION", line 1223
Then I uncommented it (I granted execute to the package beforehand) but got the same error.
As I said, I am connected as the same database user as the application parsing schema, and the application does not require authentication. Where did it go wrong?
Please see below the code I am using.
Thanks
Luis
declare
l_workspace_id   number;
l_application_id number;
l_user           varchar2(30);
l_owner          varchar2(30);
l_cgivar_name    owa.vc_arr;
l_cgivar_val     owa.vc_arr;
BEGIN
htp.init;
l_cgivar_name(1) := 'REQUEST_PROTOCOL';
l_cgivar_val(1) := 'HTTP';
owa.init_cgi_env(num_params => 1, param_name => l_cgivar_name, param_val => l_cgivar_val);
l_user           := 'ADMIN'; -- authenticated username
l_application_id := 999; -- application ID
l_owner          := 'PS'; -- application owner (parsing schema)
for c1 in (select workspace_id
             from   apex_applications
             where application_id = l_application_id)
loop
    l_workspace_id := c1.workspace_id;
    dbms_output.put_line('l_workspace_id:' || l_workspace_id);
end loop;
wwv_flow_api.set_security_group_id(l_workspace_id);
apex_application.g_instance     := 1;
apex_application.g_flow_id      := l_application_id;
apex_application.g_flow_step_id := 1;
wwv_flow_custom_auth_std.post_login(p_uname      => l_user,
                                      p_session_id => null,
                                      p_flow_page => apex_application.g_flow_id || ':' || 1);
flows_030100.wwv_flow_security.g_parse_as_schema := l_owner;
-- Call the procedure
my_pkg.my_proc;    --- ERROR HERE
end;

My mac is not accepting my name and password for login because it is in arabic how am i suppose to login?

my mac is not accepting my name and password for login because it is in arabic how am i suppose to login? how do i type Mark Yap in arabic, im typing it in pressing the actual letters on the keyboard but wint accept it?

I am assuming that you are trying to log in with the English language. If this is the case (or any other language for that matter), see if there is a button on the login screen that allows you to change your language.

How to change Enumerator programmatically in LabVIEW called in Teststand

How to change Enumerator programmatically in LabVIEW called in Teststand ?
I know that Enumerator cannot be changed programmatically since the data type itself different from other controls like Ring and Combo box.
My application involves in Property loader which will load the list of names to Enumerator during Initialization. And the same shall be used by operator to select in further steps for testing. I tried with Ring and combo box but it doesn't works because its not giving dropdown option in TestStand Steps to select the name.
I need a drop down and also programmatically changing the value of the same variable. I had gone through all forum solutions regarding Enum, but I couldn't get any work around for this.
Please suggest me a solution or best work around to do this.
Thanks,
Vijay
L&T Limited
Certified LabVIEW Developer
India.

Can you provide an example of how a ring control/combo box does not work? This should be the way to do what you want unless I am misunderstanding exactly what you want to do. In theory you could have a dynamic enumerator type, but there are lots of hoops to jump through using VI server and scripting and it is not worth the effort. Aesthetically, you can make the ring control and enumerated data type look exactly the same. I would be using a ring control.
Please post an example of how it does not work.

How to do a programmatic login in a server context

Similar Messages

Maybe you are looking for