How to do a Retractor to send data from SEM-BPS to R/3
Hi Folks!
Can someone say to me how to do a Retractor, step by step, to send data from SEM-BPS to R/3.
Thanks a lot in advance for your input!
Rocío.
Hi Thorsten,
Yes, I know it. But I didn´t want make it make through queries.
I have read than for CO-PA there are standard functions that send the data to R/3, but I cannot make they work to me.
And in addition I will need to also create other Retractors for RRHH, and there are not standard functions.
For that reason I needed know how to create a Retractor step by step.
Regards,
Rocío.
Similar Messages
-
How is the best way to send data from local database into remote database ?
Hi all,
I need to send data from local Oracle database into remote oracle database. Both sites connected via 128 kbps frame relay connection.
The sending need to be done once a week, can be done nightly.
How is the best way to do this ?
Thank you very much,
xtantoHow is the best way to do this ?How much are you planning to send?
You can use COPY command. Ensure that you have valid database link between two databases.
Available options are:
create - creates a new table. errors out if the destination table exists.
replace - drop the destination table and re-creates with data.
insert - inserts data if the destination table exists.
append– appends data into an existing table.
use set arraysize 5000 -The arraysize specifies the number of rows that SQL*Plus will retrieve from the database at one time.
copy from scott/tiger@ORCL to scott/tiger@ORCL92 create new_emp using select * from emp; -
How can I use notifications to send data from different sources to thesame chart?
Hi,
I am using the "Continuous Measurement and Logging" template project that ships with LV 2013.
It is extremenly helpful for figuring out messaging between the acquire, graph, and log loops. (Thanks NI!)
I've run into a snag however.
I would like to modify it so that my graphing loop receives data notifications from two acquisition sources via notifiers.
I'm having trouble getting data from both sources to display on the same chart.
I've isolated the issue in the attached vi.
Here's what happens:
1. I create data from 2 parallel loops and send the data to a third parallel loop with notifiers.
2. The third loop receives data from only one of the loops because one of the receiving notifiers just times out instead of receiving data.
Can someone suggest how I can fix this?
Thanks.
- Matt
Solved!
Go to Solution.
Attachments:
test notification loop.vi 42 KBHere is my modification of your VI. I put notes on the block diagram to explain the changes. It uses a queue for the data transfer to avoid loss of data. It uses a notifier to stop the loops. All local variables and Value property nodes have been eliminated.
The way the loops are stopped will likely leave some data in the queue. No more than one or two iterations of each of the data acquisition loops. If you need to guarantee that all data has been displayed (or saved in a real application), then you need to stop the acquisition loops first and read the queue until you know it is empty and both of the other loops have stopped. Then stop the display loop and release the queue and notifier.
Lynn
Attachments:
test notification loop.ldj.vi 1036 KB -
How to send data from internal table to the shared folder in ABAP
Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers -
How do I convert or send data from a MacBook Pro to an s-video device???
How do I convert or send data from a MacBook Pro to an s-video device??
Use a Mini-Displayport-to-VGA adapter and a conversion box like this:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2
MBP -
I am trying to send data from my computer to my ipad, how do i do this if icloud says I cannot use it as I have multiple versions of outlook
Have you had more than one version of Outlook?
-
IDOC :: how to send data from Custom Infotype in SAP HR to third party
Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
ZTALENT Talent Management
5 E1PLOGI Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP HR: Transported Infotypes and Subtypes for an Object
ZPUSER User base Data File
ZPERSON Personal Information File Segment
ZPOST Position File
ZOPE Overall Performance
ZPWORK Outside Work Experience
ZPEDUC Education Details of Employee
E1P0000 HR: HR Master Record Infotype 0000 (Actions)
E1P0001 HR: HR Master Record Infotype 0001 (Org. Assignment)
E1P0002 HR: HR Master Record Infotype 0002 (Personal Data)
E1P0016 HR Master Record: Infotype 0016 (Contract Elements)
E1P0022 HR Master Record: Infotype 0022 (Education)
E1P0023 HR Master Record: Infotype 0023 (Other/Previous Employers)
E1P0041 HR Master Record: Infotype 0041 (Date Specifications)
E1P0105 HR: HR Master Record Infotype 0105 (Communications)
ZE1P9020
ZPLANG Language Details
ZACTION Actions Changes
Regards,
KrishnaHello Shankar,
Technically TEMSE files are read by calling the following 3 function modules in sequence,
1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
2) RSTS_READ : read the object
3) RSTS_CLOSE: close the object
Regards,
Rajesh -
EPM add-in for Excel question : How to send data from local member?
Dear experts,
for EPM add-in for excel, how do I send data from local member?
best regards,
Evans.Hello Evans,
Could you please explain what is your requisite? What is the formula on your local member?
You can also apply formulas to formatting sheet. This way you can reference the cells in your formatting sheet formulas and save the values in the report area.
Please check this blog:
How to use Excel formulas in BPC Input Schedules
Thank you
Best regards,
Raquel Oliveira -
I would like to use DDE to send data from a Lookout Server to an Excel
Hello National Instruments,
I would like to use DDE to send data from a Lookout Server to an Excel
Spreadsheet.
I have Lookout 6.1 on a server connected to 4 client workstations
The operating system on the server is Windows Server 2003 R2; Standard Edition;
Service Pack 2
I have opened DDE Share but after filing in Share Name; Static Application
Name; Static Topic Name
I get a message, "Can't bind to DSDM service"
I also get this message when I press add a Share
What are the steps to setting up this type of communications link?
Thanks,
David Lopez
Scada Functional AnalystRyan,
I have followed the steps on the Knowledge Base "How do I use DDE To Send Data Across the Network To Excel From Lookout?" but what I am seeing is that the computer with excel (Computer B)hangs up displaying an hour glass continuously leaving me no option but to go into task manager to stop excel. It appears to me that the dde share is not working properly on my windows xp where lookout resides or I do not have a certain service turned on. I do have the DDE services turned on both computers. I have my computer set up as computer A with Lookout and Process1 as the process with a pot set up as pot1. On my computer (Computer A) I also have the dde share set up per the KB example.
On computer B I have the dde services turned on and I am typing the following into an excel worksheet Cell ='\\TAG23232\NDDE$'|'Process1$'!Pot1
TAG 23232 is Computer A's Name
Do you have any suggestions??? -
Sending Data from R/3 to Java and Java to SAP
Dear All,
I am working on a scenario in which I have to send data from sap system to Non-SAP system (Java System).
Now one way is that I made a RFC in my SAP system and Java can call it using JCO adapter. But In this case I am not able to understand how to go another way,means how to capture data or messages from Java.
Secondly I have searched and found that IDOC can help me lot in this process ,I am new to IDOCS but through R & D , I have made the IDOC and done the following steps:-
1. Segment Creation (WE31)
2. IDOC Types (WE30)
3. Message Type (WE81)
4. Linking Message type and IDOC type (WE82)
5. Create Distribution Model (BD64)
Now I am struck on 5th step , I am not able to distribute model when I distribute it I get the following Error
Target system AII_00_800 RFC destination for synchronous communication (message type SYNCH)
Partner profile LS AII_00_800 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Target system JAVASYS RFC destination for synchronous communication (message type SYNCH)
Partner profile LS JAVASYS SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
JAVASYS is the logical system I created using SALE and ALL_00_800 is already there in LS.
I am not able to understand that my receiver system is NON SAP system so do I have to create logical system for it , and I have IDES system as sender system with only one client 800, what are all the configuration I have to do on SAP side.
I am also not able to understand where I will write my code to fetch data based on the input provided by NON SAP system as I will have to design IDOC for both Inbound and Outbound processes.
Kindly help me out, thanks in advanceHi Kanagaraja L,
Thanks for you response.
No I haven't created Created RFC Destination , this RFC destination will be of my JAVA system ???.
I have tried creating the partner logical system in WE20 and dine the following steps:
1. Partner No. IDES800 Ides 800 System - Sender System
Partn.Type LS Logical system
2. The tab Post processing : permitted agent is filled with default parameters.
3. Then in the outbound parameter table control I have pressed the add record button and got a new screen in
which I have made the following entry :-
Partner No. IDES800 Ides 800 System - Sender System
Partn.Type LS Logical system
Partner Role LS Logical system
Message Type SYNCH ALE:Dummy Message Type for De
Message code
Message function
Under tab Outbound options :
Receiver Port = A000000008 (This I have selected from F4 help)
Basic type = SYNCHRON
Saved it with the above data.
Now I am not able to understand how to do the things you have mentioned in 3rd step in your reply.
What are all the things I have to do kindly tell , as I am very new to Idocs so don't have much knowledge.
Edited by: Rachit Khanna on Dec 7, 2009 1:49 PM -
Steps to send data from BI 7.0 to PI in XML format...
Hello everybody,
Can somebody share any direct link to a document or thread where I can find step by step details as to how to send data from BI 7.0 to PI in XML format?
I extracted data from ODS objects into CSV files through Open Hub Destination before, but need to know how to send same ODS data from BI to PI in XML format...
Thanks in advance.
~S.H.just an idea:
Maybe one way could be creating xml data via simple transformation or standard transformation in sap bw. After maybe there could create an inbound message in xi for getting the data.
I never done it, but I thought this could be a practice?
Hope there will be better comments for that problem, soon! -
Deadlock issue while sending data from PI to JDBC !!!
Hi All,
We are getting below error while sending data from PI to JDBC (Database).
Error - JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'store_order_details' (structure 'Order_details_Statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 61) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
This is happening when more than one PI message is trying to deliver data at the same time to database.
Can anyone let us know the root cause of this issue and how we can rectify this.
Is there some setting which we can use to do parallel processing as Delivering one message at a time to database is causing performance issues & taking lot of time.
Thanks
Neha VermaHello Neha,
Strange but can please get below information.
Please check with the DB admin about if the user is getting locked or is there any hanging threads related to user.
Also confirm with DB admin if the exclusive lock is on table or on the row when you try insertign or updating information.
You can share the user from the receiver channel.
Regards,
Hiren A. -
Sending data from R/3 to XI in real time
Hi All,
How do u send data from R3 to XI in real time??
out of 3 methods which method do we use frequently(exe prog,message cont,chan pointer).
Do we send master data to XI in real time at all??
How will the transaction data sent??,please explain.
thanks in advance
srinivas.Srinivas,
whether to send data to XI or collect them in the source system and send them once all , depends on your business needs. There are situations, where this is needed instatly - for example synchronous scenario. User worx in one application and needs to receive information from another one - this is done "in real time". But if u want to use XI for some kind of data replication, u can do it for example just once a day.
>>which method of 3??
Depends on your needs. How would you use exe prog for r/3 data sending? It can't be done...
>>master data replication
well, master data are exactly the thing, which is not necesserily replicated in "real time". But it depends...
Please, place your problem in more detail.. These are very generic questions..
Peter -
Send data from GPIB Read Function to XY Graph
hello
I'm really new to LabVIEW so this is probably an easy one, but I'm having a serious issue trying to figure this one out. how do I send data from GPIB Read Function to a graph, let's say XY Graph. my data consists of a string of numbers, separated by commas, alternating between X and Y values. for instance:
0, 0, 0.1, 0.2, 0.2, 0.4, 0.3, 0.9, 0.4, 1.6, 0.5, 2.5, 0.6, 3.6, 0.7, 4.9
which would graph a parabola. I tried to connect the output (data) of BPIB Read Function to XY Graph, but I get an error. do I have to do something else before I send that data to the XY Graph? thanks for any suggestions.
r.
Solved!
Go to Solution.first of all, thanks a bunch for replying
I added "spreadsheet string to array function" and it looked OK (I didn't connect anything to 'array type' because I couldn't figure out what those blocks were - I'm really new to LabVIEW"
I couldn't find "decimate array" so I added "decimate 1D array," which is what my labVIEW listed (I have 8.6). I fed that directly into "express XY Graph," which lets me feed separate X and Y values (or so I assume). but, even though the input to "decimate 1D array" and output of "spreadsheet string to array function" say 'array' - the program is not happy. when I move my mouse over the 'x', the following is the message that I get:
"you have connected two arrays of different dimensions.
The dimension of is 2.
The dimension of is 1."
I'm not quite sure what that means. any suggestions what I can do with it?
Attachments:
Picture 1.png 11 KB -
Hello, I have problem right now. I tried to send data from bpel to BAM (without enterprise link) but It failed. Then I found error like this:
java.io.IOException: URL is invalid /OracleBAMWS/inspection.wsil [407]
at com.collaxa.cube.engine.sensor.sa.publisher.bam.BAMServerConnection.testConnection(BAMServerConnection.java:289)
at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamEndpoint.testEndpoint(BamEndpoint.java:444)
at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamEndpoint.testConnection(BamEndpoint.java:373)
at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamEndpoint.init(BamEndpoint.java:119)
at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamDataObjectMetadata.pingBamAndFlushExceptionQueue(BamDataObjectMetadata.java:221)
at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamJob.pingAction(BamJob.java:69)
at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamJob.execute(BamJob.java:58)
at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)
I don't know why it check in 'OracleBAMWS', I tried http://localhost/oraclebam/OracleBAM/inspection.wsil and it works, but when I tried http://localhost/oraclebam/OracleBAMWS/inspection.wsil the page can't be found. How to fix this? And I want to know where 'OracleBAMWS' declaration come from?
Just for info, I'm using version 101330.
thxmost likely your BPEL and BAM servers are not at the same version level. if your BPEL is 10.1.3.4, your BAM must be 10.1.3.4 as well.
Maybe you are looking for
-
?!?! See who can figure this one out first...
ok, so this has been happening on and off for the past 3 months, just curious if anyone else has had this happen as well. so im working in Logic (this happened in 7 and now 8 as well) and i get done with my session and im going to close logic for a b
-
I am unable to open any pdf files because I have not accepted the end user licensing agreement for adobe reader. I can not find the accept button. I have a mac.
-
Where is the swing.properties file?
In J2SDK 1.5 beta, where is the swing.properties file. The file is supposed to be located in <Java Home>/lib/ but it is not there. Thanks,
-
Patterns to execute a SQL Statement from a Droplet (select)
Hi, I need to perform a query on a table, Example: select * from ARF_QUERY "the database used is Oracle. I would like to know if the atg has some standard method to perform this database connection and execute the SQL statement from a Droplet (select
-
Numbers: Reducing a list to unique rows
My end goal here is a text based table that lists all the Artists I have in my iTunes Library, and all the albums I have for each Artist. I'm off to a great start after exporting my Library using Export in iTunes, using Unicode Text and subsequently