How to do a reverb effect on vocal recordings ?

Hi all experts,
Sorry I am only a beginner, what I did was TRACK > NEW BASIC TRACK. I test & record some vocal. But my voice is horrible.
What are the steps to do a reverb effect on the recorded voice ?
Thanks

RyanManUtd wrote:
Any video demo to show what those are ?
i wouldn't be surprised if there are some on YoutTube, however most of the effects are pretty standard, web searches on "EQ" or "audio compressors" will turn up more info then you could read in a lietime.
Just to be sure before I slide it.
don't worry about understanding things before you try them:
http://www.bulletsandbones.com/GB/GBFAQ.html#nondestructive
(Let the page FULLY load. The link to your answer is at the top of your screen)
May I ask, if I slide it to say 30, the 30 will apply to the whole track ?
yes
What if certain section I want it 20 & certain section I want it 30 ?
open GB's help menu and search for "curve"

Similar Messages

How do I apply special effects to a track when I keep getting error message that "Could not find layout Default Reverb GB"?

How do I apply special effects to a track in GarageBand when I keep getting error message that says"Could not find layout Default Reverb GB"?

I go to Applications to see if
GarageBand has changed and dthere is no change, still 1.42GB of file size ‹
no evidence of the 10+ GB that the installer told me I was downloading, no
evidence in my download folder that I downloded anything, and most
important, when I click on ³Effects² I¹m back to the same error message.
I¹ve been at this now for about 3 hours.
Downloading the extra content will take a very long time.
When the download has finished, the prompt for the password will appear and the installer will continue to run in the background.
Let t run. As long as GarageBand is still installing, it will give a warning, when you try to quit.
When you can quit GarageBand without a warning, restart your Mac.
The size of the GarageBand application will not change, but you should be seeing more loops. They are installed in the System Library, and the folder "Library" on your Macintosh HD should by now be 10GB larger.

Echo and reverb effects disabled?

I created a project and recorded tracks with echo and reverb effects, but now when I open the project the echo and reverb effects are both disabled; I can't enable them or change their values, and the effects aren't present during playback or after export. Any idea what might be the reason/resolution for this? Thanks for your help.

It's not so weird if you understand how it works: These echo and reverb effects are "global" effects for your song - all tracks are sent through the same effect, and with the echo and reverb sliders you only determine the mix of "wet" and "dry". That saves a lot of processing power.
Of course you can apply additional different reverbs to each single track, but aside from computing resources it will cost you one of your effects slots.

How do I get more effects in my action box? I am only showing a few, like BOTTOM BORDERS, LOSE WEIGHT AND SPECIAL EFFECTS. That is all. The turotials I've checked into all show a long list of effects in the actions box. If anyone could help, I appreciate

How do I get more effects in my action box? I am only showing a few, like "Bottom Borders, Losing Weight, Resize and Crop, and Special Effects. And they do not list but a few effects. When I have watched the tutorials, they are showing a long list of effects in the action box. (with a side space bar) I do not. When I have clicked on the little arrow at top, and clicked "Load Actions", a box comes up, but it is blank,saying "no items match your search". I'm lost! If someone could help, it would be much appreciated! I would like to start using this.
Thank you.

Apple Computer Customer Relations:
1-512-674-2500

How can I create an effect to cycle through several sets of 12 thumbnail images rather than just one

Hello
I've searched everywhere i can think of and had no luck so thought it's about time i asked for help.
How do I create an effect where a group of 12 thumbnail images (all with clickable links) can scroll across by clicking a button to reveal another set of 12 thumbnails and so on without having to refresh the page, im assuming jquery can help but every single slideshow or scroll effect I've come across is for single images and not a set of images.
Its a gallery part of my website and the images are in sets of 4 in 3 rows.
All and any help will be greatly apprieciated!
Anthony

I think what you want is a Carousel Scroller. See Demo and Examples
http://dimsemenov.com/plugins/touchcarousel/
Nancy O.

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

How can I install after effects on 32 bit operating system?

How can I install after effects on 32 bit operating system?
I cant even find it in creative cloud.
I want to make a intro but it dossent allow me to even find/ istall it.
I hope some one will help me by anwsering my question.
Than you for time.

If your system does not meet the minimum system requirements you have to go back to a version that does. Try the direct download links you'll find here.. CS5 comes bundled with CS4 for AE which is the last version to run on a 32 bit system.

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls h

How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls help me http://www.youtube.com/watch?v=mfU8bZDKAMQ&list=HL1352499622&feature=mh_lolz

This looks like the final logo was created with several layers probably in Illustrator, then the file was most likely imported into After Effects and revealed by animating mask paths.

HT1202 I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?

I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?
Any advice welcome.

To clear to old before passing it on, open the Settings app and tap on General (left hand menu). Scroll down and tap on settings, then tap on Erase All Content and Settings.
If you have been synching the iPad to iTunes on a computer, you should also have backed it up. If you havn't backed it, you will want to do so before clearing the settings and use the back up to set up your new iPad.
You may dinf soem of the articles here useful:
http://www.apple.com/support/ipad/syncing/

How do I add an effect to a SmartShape on hover?

How do I add an effect to a smartshape on hover. For example, I've created a green rectangle which is a smartshape and is being used as a button. I have two instances of this button on a slide and am trying to do the following:
1) SmartShape A (Green rectangle) = On hover, I want this green rectangle to change it's fill color to blue.
2) SmartShape B (Green rectangle) = On hover, I want this rectangle to have a 4px yellow border (the original had no border, i.e. stroke width =0)
How would I do this without using additional objects?
For example, I don't want to have a duplicate of this smartshape (for each instance), that is used as a rollover shape which superimposes the original shape on hover -- I dont even know if that would work, sounds okay in theory though.
But it would be great if someone could help me with this, I've been struggling for some time to figure out this effect.
Thanks so much,
Sean

LOL, in the words of my father: Wish in one hand and spit in the other. See which one gets full faster!
It's the same issue I have with the title of an old book written by Napoleon Hill. Its name is "Think and Grow Rich". It's missing a word! *ACT*. Nobody just thinks and grows rich. Everyone must *ACT* on their thoughts.
So that's why I'm posting. Sure, it's great to state that you wish something were a certain way in Captivate or any other app. What you need to do is to tell Adobe about it. And you do that by visiting the link below and completing the wish form!
http://www.adobe.com/go/wish
Cheers... Rick

TS5249 After reverting back to Garageband 6.0, I find that I still lack all the Garageband Effects (Distortion, Vocal Transformer, etc.). The Garageband 10 "AU" plug ins are there instead. I need help getting the old effects back.

After reverting back to Garageband 6.0, I find that I still lack all the Garageband Effects (Distortion, Vocal Transformer, etc.). The Garageband 10 "AU" plug ins are there instead.
For background: I lost my v6 because I had to reformat my whole hard drive. When I reformatted I lost GB and everything else I had. I downloaded GB (unaware of the awfulness that is v10) from the App Store. The fact that v10 does not have all my favorite and most used effects from v6, I uninstalled v10 and redownloaded v6 from my App Store Purchases. I load up v6 only to find that all the default effects are there for each instrument, but when I go to add an effect (i.e. Distortion, Vocal Transformer, Flanger, etc.), instead of the list of classic effects, there's the list of awful AU effects from v10. What gives?!

I don’t have this issue, but I am looking to learn about which parts of the old GarageBand can safely migrate to the new GarageBand 10.
(Personally, I like most of what changed in the new version. I sorely miss a few features, and I submitted some detailed feedback. If you think similarly—or if you hate the new version like babygotbackup—do the GarageBand community a favor, and send in your own feedback! From the menu, select GarageBand ▶︎ Provide GarageBand Feedback.)

How do I create an effect on on object similar to this on Illustrator?

How do I create an effect on on object similar to this on Illustrator?
Please see the type show in the link provided : "CHIVAS"
http://2.bp.blogspot.com/-F-lpKYp-QnE/UH8jwTkTmfI/AAAAAAAAOWQ/BuN9gm9Pe5U/s1600/Chivas+log o+2012.jpg
Also if anyone knows what font this is, it would be much appreciated.
Many thanks in advance,
Nick

Hello Ellie,
This is what I do:
First Create the brushes by selecting the shapes desired. Select the shape and place it into the burshes window.
(Main Menu: Window + Brushes)
Then A new window will show: Please select "New Scatter Brush"
After you click OK, a new window will appear:
In here I have selected Random Size, Spacing and Rotation. You may want to adjust the percentages to you design. The last thing to select is the Colorization Method; in this case "Tints" is selected because will allow me to change the color of the shape by using the color pallet window. After that click Ok and use the brush tool.
This is the end result after using the Mask Feature:
I know you can do something a lot better than this sample. I hope this helps!

Cool effect..how can i create this effect on Motion 3?

that's great.
Someone please tell me how can i create this effect on motion 3?
http://www.ayatoweb.com/aetips_e/ae17_mov05e.html
thanks

Use the bezier tool to create your shapes, give the shapes an Airbrush outline. Then apply a Write On behavior to each shape. Position the shapes in the timeline so they appear sequentially. To achieve the zooming out effect, you can either scale the whole group, or convert the group to 3D and use the camera to zoom out.

How can i change the effect when i hide the windows?

how can i change the effect when i hide the windows?

System Preferences>Dock>Minimize Using>Select one of the two choices.

How to do a reverb effect on vocal recordings ?

Similar Messages

Maybe you are looking for