How to do a simple recording using macbook?

I quickly need to make an audition CD - and it was suggested that I just use Garage band (which I have never even opened!).....
I don't have an external mic - so how do I make a simple recording on the Macbook of voice and piano and then burn it to a CD?

A built-in mic will do the job. If you'll never need to record your voice for anything else, that's probably all you'll want to use, but for a small investment you can make much better recordings. Here is a link to a site that is basically the equivalent of an online university for digital audio recording. It has information relevant to any/all levels of home recording:
http://www.tweakheadz.com/guide.htm
Here is a sub-heading of the same page on vocal recording:
http://www.tweakheadz.com/howto_recordvocals.htm

Similar Messages

How to mirror to tv monitor using macbook pro 2012

how to mirror to tv monitor using macbook pro 2012. The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

Howdy there nell a-7,
It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Try these steps first
Verify that your iOS device's software is up to date.
Verify your Apple TV's software is up to date.
Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
All AirPlay-enabled devices must be connected to the same Wi-Fi network.
Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices.
Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Here is some additional information about Airplay for Mac:
About AirPlay Mirroring in OS X
http://support.apple.com/kb/HT5404
Thank you for using Apple Support Communities.
All the best,
Sterling

How to open Facebook in china using MacBook Pro?

hello, please to resolve on how to open facebook in China using MacBook Pro.
Many thanks to all!

You can't. Want more GPU? You'll have to purchase a new computer.

Need help on how to create the simple mapping using ORACLE DATA INTEGRATOR

Hi guys,
am new to learn odi.. please share me or steps how to develop the simple mapping using ODI...

Hi,
I am a newbie to Oracle Data Integrator as well. You should have a look here first; http://www.business-intelligence-quotient.com/?p=379
Try to play around with ODI and then come back if you have specific questions. You should better move to this ODI-forum; Data Integrator
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Question: How to remove prompt in recording using MMAPI

Hi,
we have been developing a softphone using j2me. Our goal is to record voice (using j2me) into a byte array and deliver that as a packet either through bluetooth or wifi. We need to capture voice at a certain interval, stop the capture, deliver, and then capture the voice again.
The problem is this. Everytime i call on record, the phone prompts if i indeed want to record using the MMAPI. I think that this is a security feature but is there any way to bypass it?
--Kyle

private bool RemoveBlankPage()
        Word.Application wordapp
= null;
        Word.Document doc
= null;
        Word.Paragraphs paragraphs=null;
        try
            // Start Word APllication and set it be invisible
            wordapp
= new Word.Application();
            wordapp.Visible
= false;
            doc = wordapp.Documents.Open(wordPath);
            paragraphs
= doc.Paragraphs;
            foreach
(Word.Paragraph paragraph
in paragraphs)
if (paragraph.Range.Text.Trim()
== string.Empty)
                    paragraph.Range.Select();
                    wordapp.Selection.Delete();
            // Save the document and close document
            doc.Save();
            ((Word._Document)doc).Close();
            // Quit the word application
            ((Word._Application)wordapp).Quit();
        catch(Exception ex)
            MessageBox.Show("Exception Occur, error message is: "+ex.Message);
            return
false;
        finally
            // Clean up the unmanaged Word COM resources by explicitly
            // call Marshal.FinalReleaseComObject on all accessor objects
            if
(paragraphs != null)
Marshal.FinalReleaseComObject(paragraphs);
                paragraphs
= null;
            if
(doc != null)
Marshal.FinalReleaseComObject(doc);
                doc
= null;
            if
(wordapp != null)
Marshal.FinalReleaseComObject(wordapp);
                wordapp
= null;
        return
true;
This link helped me complete my project
https://code.msdn.microsoft.com/office/How-to-remove-blank-pages-e200755d

How can we create info record using IDOC INFREC?

Hi Friends,
Can we create info record using IDOC INFREC. If Yes. How?
Regards,
Narendra

Using IDOC INFREC & FM IDOC_INBOUND_SINGLE

How to to display entire records using PL/SQL(anoyomous block)

Hi All,
I have created a region of type PL/SQL by using rownum, and it wil display few records due to rownum.
But the end user is asking to display the rest of records also using some pagination concept or any other way.
How can we achieve this?
In mean time i have tried to execute the by removing the rownum, then it is throwing the below Query
Error- ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
Thanks,
Ano.
Edited by: Anoo on Mar 19, 2012 12:18 AM

Hi,
Here is the query we are using to dsipaly the records, but the limit we are dsiplaying is only 300.
So the concern is how we can display all records.
DECLARE
list_arr2 htmldb_application_global.vc_arr2;
p VARCHAR2(4000);
v_default_start_date DATE;
j NUMBER :=0;
occurrencies NUMBER(10);
CODESELECT VARCHAR2(7);
BEGIN
IF :P2_SYMBOL_CODE_HIDDEN IS NOT NULL THEN
CODESELECT:=:P2_SYMBOL_CODE_HIDDEN;
ELSE
CODESELECT:='';
END IF;
Select TO_char(SYSDATE-1,'MM/DD/YYYY') into v_default_start_date from Dual;
:P2_START_DATE := v_default_start_date; */
list_arr2 := htmldb_util.string_to_table (:P2_SYMBOL_NAME, ',');
p := 'SELECT SYMB_SARUS_DESCRIPTION,SYMB_CODE FROM ( '
|| 'SELECT '''' SYMB_SARUS_DESCRIPTION,''NA'' SYMB_CODE FROM DUAL ';
p := p
|| ' UNION all SELECT sym.SYMB_SARUS_DESCRIPTION || ''- '' '
|| ' || sym.SYMB_CODE SYMB_SARUS_DESCRIPTION , sym.SYMB_CODE '
|| ' from T_SYM sym ';
IF :P2_ACTIVESYMBOL='ACTIVE ONLY' THEN
p := p || ', ( SELECT distinct DSPS_SYMB_CODE FROM t_dispatch_symbol ' ||
' WHERE dsps_dsp_code IN ( SELECT adsp_dsp_code ' ||
' FROM t_aut ' ||
' WHERE adsp_vend_code=''FTP'' ' ||
')) act_symb ' ||
' WHERE sym.SYMB_CODE=act_symb.DSPS_SYMB_CODE AND ';
ELSIF :P2_ACTIVESYMBOL='INACTIVE' THEN
p := p || ', ( SELECT distinct DSPS_SYMB_CODE FROM t_dis ' ||
' WHERE dsps_dsp_code NOT IN ( SELECT adsp_dsp_code ' ||
' FROM t_aut ' ||
' WHERE adsp_vend_code=''FTP'' ' ||
')) act_symb ' ||
' WHERE sym.SYMB_CODE=act_symb.DSPS_SYMB_CODE AND ';
ELSE
p := p || ' WHERE ';
END IF;
p := p || 'UPPER(sym.SYMB_SARUS_DESCRIPTION) LIKE ';
FOR i IN 1 .. list_arr2.COUNT
LOOP
IF i = 1
THEN
p := p || ' UPPER(''%' || TRIM(list_arr2 (i)) || '%'') ';
ELSE
p :=
p
|| ' AND UPPER(SYMB_SARUS_DESCRIPTION) LIKE '
|| ' UPPER(''%'
|| TRIM(list_arr2 (i))
|| '%'') ';
END IF;
END LOOP;
p := p || ' order by 1 ) where rownum < 310 ';
p := REPLACE(p, '''||''', '||');
IF LENGTH(:P2_SYMBOL_NAME) > 2 AND :P2_HIDD = 'cdf' THEN
htp.p('<table>');
htp.p('<tr bgcolor=white><td width=20% align="left">');
htp.p('<font color="#094991" size="1"> Search By Name</font>');
htp.p('</td>');
htp.p('<td align="left">');
htp.p(APEX_ITEM.SELECT_LIST_FROM_QUERY(3,CODESELECT,p,'onChange="setSymbolCode(this.value);" size=10','NO','','','P2_SEARCHNAME','','Select'));
htp.p('</td>');
htp.p('</tr>');
htp.p('</table>');
END IF;
IF LENGTH(p)<=0 THEN
:P2_SYMBOL_CODE_HIDDEN:='';
END IF;
END;
Thanks,
Anoo.
Edited by: Anoo on Mar 19, 2012 1:10 AM

How can I know if the used macbook air I want to buy has been stolen?

Hi!
I'm looking to buy a used MacBook Air 11 inch - mid 2013. I have the serial number, but I can't find the date of purchase. The seller is not the first owner, he doesn't have the bill or any papers, he doesn't know when the original owner bought it, and he doesn't how to reach him either. When I try to look at the infos on https://selfsolve.apple.com/RegisterProduct.do?productRegister=Y&country=FRA&id= C02M5570F5N7, the site gives me the model and it ask me to confirm de date of purchase. LIke this:
Is it safe to buy this computer or not?
Thank you!

I concur with Barry Hemphill.
In the USA, if the property is determined to have been stolen, it must be surrendered by the individual in possession of it with no compensation.
The circumstances you describe are too suspicious.
Ciao.

How do I select more records using data blocks, set_block_property

Hi, I am new in oracle forms builder. I want to fetch more then one records using set_block_property and data block. please help me. How do I select more then one data? I don't have any Idea about Oracle
Please Help its urgent

What is your Forms version? Is your form in "Form" (single record) or "Tabular" (multi-record) layout? You can't use the SET_BLOCK_PROPERTY() built-in to change the number of records that are displayed - this must be done during design through the Forms Builder.
What exactly are you needing to do?
Craig...

How to create a new record using a custom method?

Hi I want to create Jdev 11 a new record using the contructor following in the footsteps of http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.CACCIJAG/vtTopicFile.adfdevguide%7Cweb_adv~htm/.
My problem is the following.
Messages for this page are listed below.
Error
JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
Object: null is not a known entity type.
Someone can help me?
Cristian.

Hello Frank, this tutorial make it and was successful but, what I am trying to do is add a new record in the table departments. The steps undertaken are suguientes
drag over page the contructor department, with a submit, this will drag on the button, the method presistencia, set binding action with "$ (bindings.Departments.result)", and when running the application gives me the error
Nov 2, 2007 10:06:22 PM oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: ADFc: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
I need to know if what I am doing is right, because I followed the steps of the tutorials and it is not functioning the insertion of a new record.
Thank you thank you.

How to create a simple app using the MVC approach?

Hello gurus i'm trying to learn the SAPUI5 and i'm trying to create a simple app using the MVC i created the app and trying to add a lable to the view but there is nothing appear when i run it the code for the HTML page
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>
<script src="https://sapui5.hana.ondemand.com/resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m"
data-sap-ui-theme="sap_bluecrystal">
</script>

<script>
sap.ui.localResources("mytestapp");
var view = sap.ui.view({id:"idshell1", viewName:"mytestapp.shell", type:sap.ui.core.mvc.ViewType.JS});
view.placeAt("content");
</script>
</head>
<body class="sapUiBody" role="application">
<div id="content"></div>
</body>
</html>
the code for the view
sap.ui.jsview("mytestapp.shell", {
/** Specifies the Controller belonging to this View.
* In the case that it is not implemented, or that "null" is returned, this View does not have a Controller.
* @memberOf mytestapp.shell
getControllerName : function() {
return "mytestapp.shell";
/** Is initially called once after the Controller has been instantiated. It is the place where the UI is constructed.
* Since the Controller is given to this method, its event handlers can be attached right away.
* @memberOf mytestapp.shell
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
oLabel.placeAt("content");
i dont know what is wrong or if i should use a container to display my controls
any help will be appreciated
thanks in advance

Hi,
Instead of oLabel.placeAt("content"); use return oLabel;
so it will as below,
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
return oLable;
Regards,
Chandra

How can I upload DS2 recording to MACbook pro?

Olympus DS2 is not supported by Lion; how can I upload things I've recorded on DS2 player to my Macbook Pro?

In as much as the DSS Player software is only compatible with a Windows PC you need to either install Windows on your MBP via Boot Camp or use virtualization software like Parallels to install Windows. But you knew that when you bought the DS2.

How to find serial number without using macbook?

What can be used to find serial number of my macbook outside of using my macbook?
My computer was stolen and I do not have the box nor do I have it registered in iCloud, I know that iTunes holds my computer as an authorized user for my ID so I am sure somewhere it hold the serial number to identify that computer.
I just need to know how to access that information so I may register it in my name so I can have Apple help me track it.

You store purchase receipt, the box it came in, where you wrote that information down.
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

How to connect to Apple TV using MacBook Air

I Subscribe to a British streaming service that does not show the apple tv icon on its downloading screen.
i Can get onto Apple TV on the iPad by using control centre, but iPad drops the input often.
i Have a MacBook Air that is more reliable streaming but don't know how to find how to transfer downloading to my apple tv.
thanks for any help

Use AirPlay Mirroring as described here:
About AirPlay Mirroring in OS X - Apple Support

How to create a new record using ODataModel?

Hi,
I am new to UI5 and so ODataModel. I have tied one table to an ODataModel.
How would I send request to a server so that I will have a new entry created at server end?
I googled this and I tried following:
1. Called createEntry method on ODataModel as follows:
sap.ui.getCore().byId("maintainRolesTable").getModel().createEntry("DERMASSIGNMENTSet",{
"DeUser":"C5192081",
"SeqNo":"X",
"Childbp":"C5192081",
"ChildbpName":"",
"Id":"2",
"RelationType":"",
"Parentbp":"I0656568",
"ParentbpName":""
2. I called then submitChanges method on the model as follows:
sap.ui.getCore().byId("maintainRolesTable").getModel().submitChanges();
This is giving error as follows:
POST https://lsftdc00.wdf.sap.corp:1443/sap/opu/odata/sap/ZSECENTRAL_SRV/DERMASSIGNMENTSet 403 (Forbidden) datajs.js:17
2014-06-05 16:53:32 The following problem occurred: HTTP request failed403,Forbidden,CSRF token validation failed -
When I try to use ajax call instead of these methods, I get error as follows:
var obj={
"Childbp": "C5192081",
"ChildbpName": "Supriya Kale",
"DeUser": "C5192081",
"Id": "8",
"Parentbp": "I0656568",
"ParentbpName": "",
"RelationType": "RESOURCE MANAGER",
"SeqNo": "1",
             "metadata":{
                 "id":"https://lsftdc00.wdf.sap.corp:1443/sap/opu/odata/sap/ZSECENTRAL_SRV/DERMASSIGNMENTSet(DeUser='C5192081',SeqNo='x')",
                 "uri":"https://lsftdc00.wdf.sap.corp:1443/sap/opu/odata/sap/ZSECENTRAL_SRV/DERMASSIGNMENTSet(DeUser='C5192081',SeqNo='x')",
                 "type":"ZSECENTRAL_SRV.DERMASSIGNMENT"
$.ajax({
type: "PUT",
dataType: "json",
url: "https://lsftdc00.wdf.sap.corp:1443/sap/opu/odata/sap/ZSECENTRAL_SRV/DERMASSIGNMENTSet",
data: JSON.stringify(obj)
}).success(function( msg ) {
alert('HI read operation complete....................................');
}).error(function(msg){
alert("error occurred");
I get following error:
PUT https://lsftdc00.wdf.sap.corp:1443/sap/opu/odata/sap/ZSECENTRAL_SRV/DERMASSIGNMENTSet 403 (Forbidden)
Can anyone tell me if I am going wrong in calling methods? Help would be appreciated.
Thanks,
Supriya Kale

Hi Supriya,
you can take a look at this blog. Building a CRUD Application with SAPUI5 Using Odata Model
Scroll down to Create Operation.
There you can see that the author is also first fetching CSRF and the calling CREATE operation.
For simple example see correct answer in this thread.
HTTP request failed403,Forbidden,CSRF token validation failed
Best regards,
Peter

How to do a simple recording using macbook?

Similar Messages

Maybe you are looking for