How to do an oval inside an oval

I made an oval.  Then I copied and pasted an oval.  I selected the lower right had corner of the square around the oval.  I drag the corner inward to keep it porportional (I hope this is correct) to the first oval.  Now I want to center the smaller oval inside the larger oval.  I want to have the distance the same all around the smaller oval.  I then plan to type in the area between the two ovals.
thanks
Mike
The second oval does not seem porpotional to the first with the same distance between them.

As I said, I don't see any difference in behavior between ID and Illustrator. So do whatever you did in Illustrator to do the same in ID. You say you drag the corner to keep the oval proportional, but without the use of Shift as a constraining key that just doesn't happen. The point is that the two ovals you show, are not and cannot, be exactly proportional if they are to keep the same distance all round. The horizontal scale has to be less than the vertical, that is just the math.
As far as your procedure, again, I am at a loss as to what to say. Why would you open the AI file in Photoshop to save it as a PDF? If you want a PDF why not simply save it as a PDF in Illustrator? For that matter, why save it as a PDF at all? Why not just copy and paste the Illustrator ovals into InDesign if you're having trouble making them in InDesign?

Similar Messages

  • How do you center an oval inside an oval CS5

    I made an oval.  Then I copies and pasted an oval.  I selected the lower right had corner of the square around the oval.  I drag the corner inward to keep it porportional (I hope this is correct) to the first oval.  Now I want to center the smaller oval inside the larger oval.  I want to have the distance the same all around the smaller oval.  I then plan to type in the area between the two ovals.
    thanks
    Mike

    You can also use a combination of SmartGuides and Rulers as well as default objects such as the Rectangle Tool which have Center Points to get the center once you apply the rulers using smart guides.
                        +   <----------------------------------------centerpoint of rectangle

  • Inserting a picture inside a oval shape

    What steps do I need to insert a video inside a oval shap object?

    My new book actually covers a number of track matte effects in step-by-step how-tos:
    http://Muvipix.com/CoolTricks
    Have a look at some of the examples and tutorials and the sample chapter.

  • How do i delete cookies inside my program????

    I have a login page. I want to check whether cookies are available, if any for this user or not? And if available i want to delete previous one's. How do I do this inside my program???? Can any body help me on this issue??????? pls.
    Thanks $ Regards
    Shashi

    Search javax.servlet.http.Cookie API for that.
    You can search cookies with getCookies method in the HttpServletRequest
    You delete your cookie setting it a max age value of 0
    setMaxAge(0)

  • How to use Java code inside WebDynpro-ABAP

    Hi,
        How to use Java code inside WebDynpro-ABAP.
    Could any one provide sample code.
    Cheers,
    Sam

    Hi Sam,
    We can't Bring Java Inside the ABAP. Both are running in different Environments.
    and also ABAP Codes are runs on BASIS.
    -Basis is a middleware between ABAP codes and Ur OS.
    -Contains set of programs to load,RUN,intepret the ABAP program..
    So Both are Different.
    Regards,
    Ramganesan K.

  • HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM

    PLEASE ANYONE TELL ME, ABOUT  HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM. IT IS VERY URGENT!!!!!!!!!1

    Hi,
      Under Global Definitions, we have 'Form Routines' tab. Under this tab, u can have a dynamic subroutine call. With in FORM and ENDFORM, you can call the Function Module.With in the Program Lines editor, u can define the subroutine........PERFORM. 
    If helpful, reward points.
    Rgds,
    CK

  • How to clean the dust inside the screen of the iPod Touch?

    Hi everybody,
    lately some dust entered inside the screen of my iPod Touch.
    At first it looked like one or two pixels were gone bad, but it is just some annoying dust.
    The problem is that I cannot figure out any way to remove it.
    I tried a gentle blow from the connector hole but the result was worse.
    Any idea on how to clean the screen inside?
    I hope it is not necessary to go to an Apple Center and pay for the "cleaning service".
    Regards,
    Andrea

    It sounds safe to use
    'Falcon's® "Professional" Dust-Off® "XL" compressed-gas is the perfect product for removing dust from your color transparencies before making scans or copy slides; it's also great for removing dust from cameras, lenses, computers and other electronic equipment. Each 12 oz. disposable can comes with its own trigger value and a 4.75" nozzle extension (a red tube) that allows you to place precise bursts of compressed air just where you want it.'
    Check the directions on the back... also check the contents. Normally anything like that will inform you of contaminants harmful to delicate electrical devices.
    If its just compressed air make sure you keep the can well back from the source.. and unplug the G5 (take it somewhere you don't mind dust.. there no point doing this in situe, just for it to suck it back in again!)
    Also.. as mentioned.. keep the can upright (as the air is decompressed the can gets very cold)
    Stu
    Powermac G5 2.5 Mac OS X (10.4.2) 460gb HD 3gb RAM

  • How to apply condtion formula inside Report Writer and Report Painter

    Hi anybody,
    I am doing report painter. but i don't know how to include condition formula inside report painter or report writer. ex if condition ..
    Anybody please explain to me the steps of report writer how do this.
    I will appreciate goods answers to me.
    thanks
    Regards,
    S.Muthu
    Edited by: Subramaniyan Marimuthu on Jun 3, 2009 7:50 AM

    www.virtuosollc.com/PDF/Get_Reporter.pdf
    This is most useful PDF written by industry expert. This is more informative.
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    Regards,
    Ravi

  • Do you know how i can use Ipad inside ATEX certified areas ( e.g. refinery plant) ? Do you know if exist somespecial arrangement ( cover, enclosure, ecc) for this ?

    Do you know how i can use Ipad inside ATEX certified areas ( e.g. refinery plant) ? Do you know if exist somespecial arrangement ( cover, enclosure, ecc) for this ?

    Hello
    At least one cover manufactrer will try to propose an Atex (Ex 2) cover for ipad
    http://dofero.com/Viz-iCARRY.html
    i dont know if it is already on the market.
    Another one is making IP68 and military Standard 810F-516.15 that seems to include some kind of ability to work in explosible atmosphere.
    http://www.lifeproof.com/ipad#why-nuud
    Here what I found. I'm also interested of further talk on this topic, workimg as Occupational Hygienist for Swiss Industries.
    hope this post helps.
    Best Regards
    Vincent

  • How can i insert include_once inside fluid grid layout?...

    How can i insert include_once inside fluid grid layout?...

    Hi
    You will have to insert this in code view.
    If it is inside a FG div, select 'split' screen mode, click in the required div in design view and this will highlight the selection in code view.
    PZ

  • Hi How do we create Methods inside the Business objects of Z

    Hi Abapers,
                        How do we create Methods inside the Business objects (z objects) and how *** an import parameter or export parameter  to be defined for the new Methods.
    Regards
    Bhaskar Rao.M

    Hi Bhaskar,
    that ´s not difficult.
    Open your Bus.Obj. in SWO1 with CHANGE/EDIT
    Click on the "Methods" header line and then use the button for "Create".
    If you want to add the method on basis of a function module, choose next in the next pop up. Then the system will offer you the ex/import parameter from the function module. So this is a really simple way.
    If you don´t have a FM, it is a little bit more difficult.
    Choose No on the quetion about a FM, fill in the next pop up  methode name (no blanks allowed).
    Dialogue is for user related method (call screen...) synchronous for methods which have to give back a result directly in to the workflow.
    After completing the screen the method will be displayed as new method at the end of method list. Now add parameters (first click on the method name, then choose parameter button, same functionality to add program to the method).
    Programm:
    Code snip:
    BEGIN_METHOD ZWFCHECKMIRO CHANGING CONTAINER.
    DATA:
          ZBELNR TYPE RBKP-BELNR,
          ZGJAHR TYPE RBKP-GJAHR,
          RESULT TYPE HRP1001-ISTAT,
          BELNR TYPE BKPF-BELNR,
          GJAHR TYPE BKPF-GJAHR,
          BUKRS TYPE BKPF-BUKRS.
    to import parameter
      SWC_GET_ELEMENT CONTAINER 'Zbelnr' ZBELNR.
      SWC_GET_ELEMENT CONTAINER 'Zgjahr' ZGJAHR.
    *(or SWC_GET_TABLE)
    here add the functionality of your method!
    to export parameter
    SWC_SET_ELEMENT CONTAINER 'Result' RESULT.
      SWC_SET_ELEMENT CONTAINER 'Belnr' BELNR.
    *(or SWC_SET_TABLE)
    !!! Important: naming convention!!! Use same writing of parameter names in
    PARAM area (button PARAMETER) and here in code.
    To use your method, change it to implemented after adding your code.
    -> Edit -> Change release status -> object type component -> into implemented
    (Sorry , have a german screen here, possibly terms are a little bit different.
    Hope this helps a little bit.!
    regards
    Dirk

  • How can I publish artwork inside the artboard only?

    How can I publish artwork inside the artboard only?
    As I don't want to show anything outside the artboard when I publish it.
    Also, how can I make the published swf file fit to the artboard size? As I don't want to show the white area outside the artboard.
    Hope someone could help! Many thanks!

    One thing I have noticed is that when you embed the .swf, if you don't designate the widht and height, sometimes you will see some of the extra outside the artboard. For example:
    I uploaded my published files to www.website.com/flash and my .swf is at www.website.com/flash/Main.swf. If I just use that url I will see the extra from Main.swf. However, if I create a page where I embed the .swf, like www.website.com/main.html, I no longer see it.

  • How can i use JSTL inside custom tag attribute

    Hi,
    I have one button tag which displays the button with round corner. I will show the button like this:
    <ep:button key="buttons.submit" name="submitBtn" styleClass="But"
              onClick='submitPage(''<c:out value='${buttonName}' />)' />
    I am getting the problem with the above code. how can i use JSTL inside the custom tags.
    Thanks in Advance,
    LALITH

    No. The details are given below:
    I have included the follwing line in web.xml file:
    <taglib>
        <taglib-uri>/tags/button</taglib-uri>
        <taglib-location>/WEB-INF/button.tld</taglib-location>
      </taglib>button.tld file
    <taglib>
         <tlibversion>1.0</tlibversion>
         <jspversion>2.0</jspversion>
         <shortname>button</shortname>
         <tag>
              <name>button</name>
              <tagclass>com.ksi.ep.web.taglib.ButtonTag</tagclass>
              <bodycontent>empty</bodycontent>
              <attribute>
                   <name>name</name>
                   <required>true</required>
                   <rtexprvalue>false</rtexprvalue>
              </attribute>
              <attribute>
                   <name>key</name>
                   <required>true</required>
                   <rtexprvalue>true</rtexprvalue>
              </attribute>
              <attribute>
                   <name>onClick</name>
                   <required>true</required>
                   <rtexprvalue>true</rtexprvalue>
              </attribute>
    </taglib>ButtonTag.java :
    public class ButtonTag extends TagSupport {
       private static final long serialVersionUID = 6837146537426981407L;
         * Initialise the logger for the class
        protected final transient Log log = LogFactory.getLog(ButtonTag.class);
         *  holds the Value of the button tag
        protected String onClick = null;
         *  holds message resources key
        protected String key = null;
         * The message resources for this package.
        protected static MessageResources messages =
                             MessageResources.getMessageResources
                                       ("ApplicationResources");
          *  (non-Javadoc)
          * @see javax.servlet.jsp.tagext.TagSupport#doStartTag()
         public int doStartTag() throws JspException {    
            StringBuffer label = new StringBuffer();         
            HttpServletRequest request = (HttpServletRequest)pageContext.getRequest();
            try {             
                   log.debug("in doStartTag()");
                   Locale locale = pageContext.getRequest().getLocale();
                 if (locale == null) {
                     locale = Locale.getDefault();
                 log.info("");
                 label.append("<a border=\"0\" style=\"text-decoration:none;color:#FFFFFF\" href=\"JavaScript:");
                 label.append(onClick);
                 label.append("\" >");
                   label.append("<table  onClick=\"");
                   label.append(onClick);               
                   label.append("\" ");
                   if(onmouseout!=null && !"".equalsIgnoreCase(onmouseout))
                    label.append(" onmouseout=\"");
                    label.append(onmouseout);               
                    label.append("\" ");
                   if(onmouseover!=null && !"".equalsIgnoreCase(onmouseover)){
                    label.append(" onmouseover=\"");
                    label.append(onmouseover);               
                    label.append("\" ");
                   if(title!=null && !"".equalsIgnoreCase(title)){
                    label.append(" title=\"");
                    label.append(title);               
                    label.append("\" ");
                   label.append("style=\"cursor:hand\" tabindex=\"1\" border=\"0\" cellpadding=\"0\" cellspacing=\"0\" background=\"");
                   label.append(request.getContextPath());
                   label.append(System.getProperty("file.separator"));
                   label.append("images");
                   label.append(System.getProperty("file.separator"));
                   label.append("background1.jpg\" > ");
                 label.append("<tr><td width=\"10\"><img  border=\"0\" src=\"");
                 label.append(request.getContextPath());
                   label.append(System.getProperty("file.separator"));
                   label.append("images");
                   label.append(System.getProperty("file.separator"));
                 label.append("leftcorner.jpg\" ></td> ");
                 label.append("<td valign=\"middle\"  style=\"padding-bottom:2px\"><font color=\"#FFFFFF\" style=\"");
                 label.append(styleClass);
                 label.append("\">");
                 label.append(messages.getMessage(key));
                 label.append("</font></td>");
                 label.append("<td width=\"10\" align=\"right\"><img src=\"");
                 label.append(request.getContextPath());
                   label.append(System.getProperty("file.separator"));
                   label.append("images");
                   label.append(System.getProperty("file.separator"));            
                 label.append("rightcorner.jpg\" border=\"0\"  ></td>");
                 label.append("</tr></table></a>");
                 pageContext.getOut().print(label.toString());
              } catch (Exception e) {               
                   log.error("Exception occured while rendering the button", e);
                   throw new JspException(e);
            return (SKIP_BODY);
         * Release all allocated resources.
        public void release() {       
            this.name=null;
            this.key=null;
            this.onClick=null;
    }In my JSP I have mentioned the taglib directive as
    <%@ taglib uri="/tags/button" prefix="ep"%>and
    <ep:button key="buttons.submit" name="submitBtn" styleClass="But"
         onClick='overwritePreApprovals('<c:out value='${transactionalDetails['inPrepList']}' />')' />Servlet.service() for servlet action threw exception
    org.apache.jasper.JasperException: /pages/pms/coordinator/Dashboard.jsp(325,48) Unterminated <ep:button tag
    Thanks,
    LALITH

  • How do we trap exception inside the function module?

    How do we trap exception inside the function module?

    Use ABAP Help - CATCH, RAISE for starters. Or take a look at an existing function module, for example.

  • After syncing my phone my email shows differently...It showed all of my emails as unread. Now it shows how many emails I have withthe red oval beside the envelope icon rather than just the new ones. How do I get it to go back to only showing new emails?

    After syncing my phone my emails all showed up as unread. Even after reading them again! I still get the # of total emails in the red oval beside the envelope app picture. It used to only show the number of NEW emails. How do I get it to go back to that?? HELP!

    Is there a setting in about:config that controls the length of the alltabs list? I would look for such a thing, and change the setting if it is there. A setting of -1 should make it limitless.

Maybe you are looking for