How to do an unattend install?

Hello I have been tasked with created an auto build of Livecycle Workbench 9500 and ES 2 I think it is.
I have seen posts saying I will email instructions but surely they should be freeely available, but I cannot find anyway of doing a reletively simple install process.
thanks in advance
note ES2 has a msi and installs fine it the Workbench I need to install silently

I did another permissions repair and this is what I get upon completion of the permissions verification:
Verify permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions verification complete

Similar Messages

Oracle ADI unattend install

Can someone know how to perform the unattended install for Oracle Applications Desktop Integrators 7.2 ? Do it support response file at all ? I found a response file NT.RSP and WIN32.RSP in the installer directory, but I don't know how to use it (I filled in the content over here but the Windows prompt will occurred ? Can someone help me. Many Thanks.

Hi DB
As far as I know, ADI and Discoverer do have any dependency that should prevent you from doing what you are doing.
What is the error you get when you try to install in the same ORACLE_HOME?
Can you give more information about the errors you get when you install in separate ORACLE_HOMEs?
I assume you would have checked the install logs and application logs to determine if there is anything obvious there ?
MSK

Unattended install of a .air applications - how to

I have a Adobe Air application ( .air) that I need to install across multiple machines.
Is there anyway to do a unattended install?
This would be on Mac OS Based computers and I have access to Apple Remote Desktop so I can copy and start the installer application on each machine, but right now it stops at the security screen like the one shown below and I have to visit each computer to complete.
Thank you
Mark

Firefox Profiles - Where Firefox stores your bookmarks, passwords and other user data
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
More about Profile
*https://support.mozilla.org/en-US/kb/profiles-where-firefox-stores-user-data
*https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_Manager

Commands to copy apps to local drive from networkshare and installing via unattend install

Hi Everyone,
I'm in the process of deploying and testing Windows 8.1 with different settings via unattended answer file. I would like to test out with another settings during unattended install but I'm having a hard time to implement it. Here is the scenario, I've a
server named WDS-DEP-SERV with a hard drive portioned into 2. One is C and other is E. On my E drive, I've a bunch of .exe apps saved. I would like my unattended answer file to pull those .exe apps over to the local drive from network share and install them
as the unattended install takes place. I'm looking for a command that can help me achieve it in a silent mode. During testing before, I was able to have my unattended file to pull VMware tools drivers from network share under RunSynchronousCommand parameter
with domain credentials of the network share and it installed successfully. For example, like this below.
\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s /v "/qn REBOOT=ReallySuppress" /l C:\Windows\Temp\vmware_tools_install.log
I was searching online and came across a lot of things but none answered what I'm looking for. Can someone please reply back with the answers on how can I implement it in my unattended file.
1) To be able to have unattended file pulling drivers from network share, copy them over to local drive during unattended installation process and execute them silently. I need a command to pull this off.
2) What pass should I use in unattended file?
3) So far, I've used RunSynchronouscommand under Windows Deployement Neutral during "Specialize" pass to install just VMware tools. Is there a way to execute all apps in one go instead of doing it one at a time via Synchronouscommand? Please
correct me if I'm wrong, Is it true every time you use Synchronouscommands for various different apps or scripts to pull from network share, you'll have to use network credentials under each and every Synchronouscommands section. Like, if I add 4 SyncrhonousCommands
to the unattended file to pull 4 different apps or scripts from network share, I must provide network share credentials for each of those. Can it be just one time network share credentials under those and they all get pulled and executed during unattended
install?
Again, please if someone can get back to help me out. I would really appreciate it. Hope to hear from someone soon. Below is my unattended answer file in case someone would like to see it to understand better.
?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>WIN-8-DEPL</ComputerName>
            <ProductKey>MHF9N-XY6XB-WVXMC-BTDCT-MKKG7</ProductKey>
            <RegisteredOrganization>Microsoft</RegisteredOrganization>
            <RegisteredOwner>Microsoft</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
            <CopyProfile>true</CopyProfile>
            <BluetoothTaskbarIconEnabled>false</BluetoothTaskbarIconEnabled>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Order>1</Order>
                    <Path>net user administrator /active:no</Path>
                    <Description>Enabling Built in Administrator Account</Description>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Description>DisableNetworkLocationPrompt</Description>
                    <Order>2</Order>
                    <Path>REG ADD "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\FirstNetwork" /v Category
/t REG_DWORD /d 00000000 /f</Path>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>REG ADD HKLM\System\CurrentControlSet\Services\Tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 0xFF /f</Path>
                    <Order>3</Order>
                    <Description>Diasbling IPV6</Description>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Credentials>
                        <Domain>Mikasa.local</Domain>
                        <Password>Ghtwhts2015</Password>
                        <Username>Administrator</Username>
                    </Credentials>
                    <Path>\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s /v "/qn REBOOT=ReallySuppress" /l C:\Windows\Temp\vmware_tools_install.log</Path>
                    <Order>4</Order>
                    <Description>Vmware Tools Installation</Description>
                    <WillReboot>Always</WillReboot>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableAccelerators>true</DisableAccelerators>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <Home_Page>www.marca.com</Home_Page>
            <BlockPopups>yes</BlockPopups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <fDenyTSConnections>false</fDenyTSConnections>
        </component>
        <component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <FirewallGroups>
                <FirewallGroup wcm:action="add" wcm:keyValue="Remote Desktop">
                    <Active>true</Active>
                    <Group>Remote Desktop</Group>
                    <Profile>all</Profile>
                </FirewallGroup>
            </FirewallGroups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserAuthentication>0</UserAuthentication>
            <SecurityLayer>1</SecurityLayer>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Interfaces>
                <Interface wcm:action="add">
                    <Identifier>00-50-56-30-85-87</Identifier>
                    <Ipv4Settings>
                        <DhcpEnabled>false</DhcpEnabled>
                        <Metric>10</Metric>
                        <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled>
                    </Ipv4Settings>
                    <UnicastIpAddresses>
                        <IpAddress wcm:action="add" wcm:keyValue="1">172.16.5.120/24</IpAddress>
                    </UnicastIpAddresses>
                    <Routes>
                        <Route wcm:action="add">
                            <Identifier>0</Identifier>
                            <Prefix>0.0.0.0/0</Prefix>
                            <Metric>10</Metric>
                            <NextHopAddress>172.16.5.1</NextHopAddress>
                        </Route>
                    </Routes>
                </Interface>
            </Interfaces>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </Password>
                <Enabled>true</Enabled>
                <LogonCount>10</LogonCount>
                <Username>DarkKnight</Username>
                <Domain></Domain>
            </AutoLogon>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <NetworkLocation>Home</NetworkLocation>
                <ProtectYourPC>1</ProtectYourPC>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
                    <PlainText>false</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
                            <PlainText>false</PlainText>
                        </Password>
                        <Description>Admin User Account</Description>
                        <DisplayName>DarkKnight</DisplayName>
                        <Group>Administrators</Group>
                        <Name>DarkKnight</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <RegisteredOrganization>Mikasa</RegisteredOrganization>
            <RegisteredOwner>Mikasa</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
            <UILanguageFallback></UILanguageFallback>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Reseal>
                <Mode>Audit</Mode>
                <ForceShutdownNow>false</ForceShutdownNow>
            </Reseal>
        </component>
    </settings>
    <settings pass="generalize">
        <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipRearm>1</SkipRearm>
        </component>
    </settings>
    <settings pass="offlineServicing">
        <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <EnableLUA>false</EnableLUA>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:e:/windows-os-images/win8.1x86ent-wimfiles/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Thanks
Omar

My script on my network share failed to run during unattend install right before the first login. Can someone take a look at my unattend xml file and suggest me a solution?
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ComputerName>WIN-8-DEPL</ComputerName>
<ProductKey>MHF9N-XY6XB-WVXMC-BTDCT-MKKG7</ProductKey>
<RegisteredOrganization>Microsoft</RegisteredOrganization>
<RegisteredOwner>Microsoft</RegisteredOwner>
<ShowWindowsLive>false</ShowWindowsLive>
<TimeZone>eastern standard time</TimeZone>
<CopyProfile>true</CopyProfile>
<BluetoothTaskbarIconEnabled>false</BluetoothTaskbarIconEnabled>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Path>net user administrator /active:no</Path>
<Description>Enabling Built in Administrator Account</Description>
<WillReboot>Never</WillReboot>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>DisableNetworkLocationPrompt</Description>
<Order>2</Order>
<Path>REG ADD "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\FirstNetwork" /v Category /t REG_DWORD /d 00000000 /f</Path>
<WillReboot>Never</WillReboot>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Path>REG ADD HKLM\System\CurrentControlSet\Services\Tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 0xFF /f</Path>
<Order>3</Order>
<Description>Diasbling IPV6</Description>
<WillReboot>Never</WillReboot>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Credentials>
<Domain>Mikasa.local</Domain>
<Password>Ghtwhts2015</Password>
<Username>Administrator</Username>
</Credentials>
<Path>\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s /v "/qn REBOOT=ReallySuppress" /l C:\Windows\Temp\vmware_tools_install.log</Path>
<Order>4</Order>
<Description>Vmware Tools Installation</Description>
<WillReboot>Always</WillReboot>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableAccelerators>true</DisableAccelerators>
<DisableFirstRunWizard>true</DisableFirstRunWizard>
<Home_Page>www.marca.com</Home_Page>
<BlockPopups>yes</BlockPopups>
</component>
<component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<fDenyTSConnections>false</fDenyTSConnections>
</component>
<component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<FirewallGroups>
<FirewallGroup wcm:action="add" wcm:keyValue="Remote Desktop">
<Active>true</Active>
<Group>Remote Desktop</Group>
<Profile>all</Profile>
</FirewallGroup>
</FirewallGroups>
</component>
<component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserAuthentication>0</UserAuthentication>
<SecurityLayer>1</SecurityLayer>
</component>
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Password>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</Password>
<Enabled>true</Enabled>
<LogonCount>10</LogonCount>
<Username>DarkKnight</Username>
<Domain></Domain>
</AutoLogon>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Home</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
</OOBE>
<UserAccounts>
<AdministratorPassword>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Password>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</Password>
<Description>Admin User Account</Description>
<DisplayName>DarkKnight</DisplayName>
<Group>Administrators</Group>
<Name>DarkKnight</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<RegisteredOrganization>Mikasa</RegisteredOrganization>
<RegisteredOwner>Mikasa</RegisteredOwner>
<ShowWindowsLive>false</ShowWindowsLive>
<TimeZone>eastern standard time</TimeZone>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>cmd /C start /wait E:\RemoteInstall\Images\Windows8\install\$OEM$\$$\Setup\Scripts\SetupComplete.cmd</CommandLine>
<Description>Various Apps Installation</Description>
<Order>1</Order>
<RequiresUserInput>false</RequiresUserInput>
</SynchronousCommand>
</FirstLogonCommands>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
<UILanguageFallback></UILanguageFallback>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipRearm>1</SkipRearm>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<EnableLUA>false</EnableLUA>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:e:/windows-os-images/win8.1x86ent-wimfiles/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Creating an unattended install of 10.6?

Hello all!
I'd like to create a DVD or USB stick with a version of the Mac OS 10.6 installer that will perform the installation of the os and, possibly, go through the setup steps in the setup assistant using pre-defined data for the various options. I haven't found anything online describing how to create a Mac OS X unattended install, but I'm assuming it must be possible somehow. So, please, could anyone tell me how it's done or refer me to a place where I can find more about it?
Thanks!
Robin

Servus!
I don’t think that this is possible or done easily, but I would suggest to simply install it once by hand the way you need it. Afterwards you can clone it and restore the image on as many Macs as you like. Just keep in mind to not use a static IP or you’ll get problems.
The best way to accomplish this is by using CCC: http://www.bombich.com/
Björn

Zenworks client unattended install

I would like to be able to an unattended install of zenworks. Anyone know
what switch I need, assuming one exists, to keep it from asking me if I
would like to reboot?

How about this
http://support.novell.com/cgi-bin/se...?/10064727.htm
Jared L Jennings
Novell Support Forums SysOp
Novell Consultant with Data Technique, INC.
ICQ# 27902780
Using XanaNews 1.16.3.1

Unattended install or Oracle9iR2 using responseFile on RHEL3

Hi,
I am following this document to do the Oracle9iR2 install on RHEL3: http://www.puschitz.com/InstallingOracle9i.shtml
The Manual installation went fine for me. But my requirement is to do an Unattended install so that I can write a script and deploy to the do further installations on machines.
1) Following the same document, I create:
--- Oracle users ---
groupadd dba # group of users to be granted with SYSDBA system privilege
groupadd oinstall # group owner of Oracle files
useradd -c "Oracle software owner" -g oinstall -G dba oracle
passwd oracle
--- Oracle directories ---
mkdir -p /opt/app/oracle/product/9.2.0
chown -R oracle.oinstall /opt/app/oracle
mkdir /var/opt/oracle
chown oracle.dba /var/opt/oracle
chmod 755 /var/opt/oracle
2) The Following are choices which I make in manual install ( and I need the same in responseFile also)
/mnt/cdrom/runInstaller
- Welcome Screen: Click Next
- Inventory Location: Click Next
- Unix Group Name: Use "oinstall" and click Next
When asked to run /tmp/orainstRoot.sh, run it before you click Continue
- File Locations: Use default values
- Available Products: Select "Oracle9i Database 9.2.0.1.0"
- Installation Types: Select Custom since we only want to install the software for now
- Available Products: Click Next or add some more components.
- Components Locations: Accept default values and click Next
- Privileged Operating System Groups:
I used the default values: OSDBA Group = dba, OSOPER Group = dba
- Oracle Managent Server Repository:
I used the default choice
- Create database: Select NO since we first have to patch Oracle before a database can be created!
- Summary: Start the Install
- Configuration tools: Tools won't come up. Simply ignore it.
- At the end of the installation, exit runInstaller.
I copied custom.rsp into the home directory and modified the following:
UNIX_GROUP_NAME= oinstall
ORACLE_HOME=/opt/app/oracle/
ORACLE_HOME_NAME=OUIHome
and left the other entries in the response file (custom.rsp) as such.
When I do an unattended install using responseFile, the screen does not proceed.
The Universal Installer comes up and there is no progress!. ( Next is not pressed in the unattended fashion).
Can someone share with me a working copy of a responsefile which does an unattended custom install? I assume what is the response directory should be working one, but I am unable to figure out where I have gone wrong.
Where do I give OSDBAGroup = dba values? and how do I make it to go from one screen to next?
Thanks in advance.
Senthil

But my requirement is to do an Unattended install so that I can write a script and deploy to the do further installations on machines.Why write? You can record your own responfile (during manual install) and use it for future installs.
./runInstaller -record -destinationFile /tmp/myinstall.rsp

HIS 2013 HISServerConfig.xml example location and unattended install question

Hello,
I've never used the unattended part of the installer but wanted to give it a try. The installation guide refers to an example in the support\unattended_installs folder. I don't see that folder or file on the media I down loaded.
The guild also instructs to "save" the configuration during setup to create my own xml. I didn't see a "save" but tried using an export during my test unattended install but that didn't work. I would appreciate any help/information.
Thanks, Jim.

Hi Jim,
you are right. Unlike stated in the Installation guide this folder doesn't exist.
Anyway, here it goes:
When you install HIS the latest Setup/configuration screen will provide a link to create a XML file. Anyway, exporting the XML file out of the configuration utility will create the reference XML of your current installation and configuration.
You may modify the XML file according to the required settings of your new Server by changing the subdomain name, role, etc....
Also please note that we do not store the password in the XML file for security reasons, so you need to add this manually.
Once done, please run a similar command according to you settings as below:
Setup.exe /InstallPlatform /L c:\HISInstall.log /S c:\HISServerConfig.xml /INSTALLDIR C:\HIS Configuration.exe /L c:\ConfigFramework.Log /S c:\HISServerConfig.xml
Options
The following table describes the command options.
/InstallPlatform
This flag causes the installation program to install any platform prerequisites.
/L c:\HISInstall.log
This flag determines the log file location that is created during setup.
/S C:\HISServerConfig.xml
This flag specifies the configuration file (list of features) that is used on installation. The file "HISServerConfig.xml" contains information about which features to install and how they should be configured. Sample copies of these files are located
in the Support\Unattended_Installs directory of the installation folder. This file can also be created during setup by clicking Save in the summary panel of the Configuration Tool.
/INSTALLDIR
This option tells Setup where to install the product.
The Setup.exe installs all required binaries according to you reference installation while the configuration.exe configures you HIS Server the same as the reference configuration.
Hope that helps
Manfred Mittermüller
-- MSFT --

FCPX how many times can it install on the same computer?

From time to time I like to wipe the drives and start afresh or, whenever there is a new OS, I will perform a clean install. This entails wiping the drive and reloading all software. Most of the apps have 'de-authorize' function, this allows me to use the same licence number for the next re install.
Any idea how FCPX would install after say, four five drive refreshes? Can it understand that it is no longer resident on any machine?
Please note: I do understand how many machines I can install on at one time. This is not the same.

You can install FCPX as many time you wish

On how many computers can you install iWork?

Im not sure how many times I have installed my iWork.. maybe like three... This time around it comes up as if it was bleached, kinda wasched out.. You cannot see the colours.

If you bought the iWork as a whole, there are two possibilities :
single license --> a single machine is allowed
family license --> 5 machines are allowed
If you bought separate apps thru Mac App Store, you may install them on every machine registred under the ID used to buy.
Yvan KOENIG (VALLAURIS, France) mercredi 18 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

HT4722 How many computers can you install Final Cut on

How many computers can you install Final Cut on with one license or purchase?

This is an excerpt from the FCPX license, available here.
http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
2. Permitted License Uses and Restrictions.
A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

How many computers can you install software on

I have elements 10 installed on one computer can I install it on another?

I am pretty sure you can put on two computers. I think after you put the serial number in, Adobe will let you know whether you can put another copy on or not. It keeps track of how many times you've installed it. I hope that makes sense.

How many laptops can I install on with only one lightroom 6 license? (not cc version)

I read from somewhere that one creative cloud account can be used on two different devices, but what about the lightroom 6 version?
If I pay $149 for lightroom 6, how many laptops can I install on? I now have one windows laptop and one mac.
Thanks for helping.

I selected yours as the correct answer because of the webpage you provided, but I cannot understand that what "only use it on one computer at a time".
If the software is for offline use, how does it know if I'm running it on another computer?

How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

Adobe CR 6.7 does not install into CS5, how can I get this installed to view CR files?

Just installed CS5 onto new computer. Adobe bridge and CS5 do not recognize CR format. How can I get this installed. I have tried up dating and downloading the CR6.7 update, but can not get it to install. What do I do?

Product updates

How to do an unattend install?

Similar Messages

Maybe you are looking for