How to do Conflict Resolution in Integration Directory - Urgent

Hi,
We are having a problem when trying to change some objects in the integration directory.
Error :
"The following objects have previous versions that are no longer active.
Reciever Determination urn:sap-com:document:sap:idoc:messages | HRMD_A.HRMD_A07 .
Open these objects in the editor and perform a conflict resolution."
Could someone please respond with some solution of how to resolve this ??
Thanks
Sourav

2 Different Id's , same question in 10 minutes withing each other ?
The following objects have previous versions that are no longer active

Similar Messages

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

How to import Adapter's in Integration directory

Hi,
How to import Adapter's in Integration Directory which we can use in communication channel.
Thanks
Hari

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

How to block changes only in integration directory

Hi,
I explain the situation I´m experimenting right now:
After importing a tpz file, a developper needs to make some changes for example in the repository but he told the last time that he also modified data in a communication channel in the ID and I´d like to prevent this kind of actions right now...
What kind of roles could I use to stop this user modifying anything in Integration Directory and allow him at the same time making changes in the Integration repository?
Another thing:
Is there a kind of registration log in the Integration Directory in order to consult with details committed actions in the past?
Thank you in advance,
regards,
Olivier

Hi,
>>>What kind of roles could I use to stop this user modifying anything in Integration Directory and allow him at the same time making changes in the Integration repository?
you need to create correct role as per my blog (for directory only in your case)
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects
>>Another thing:
Is there a kind of registration log in the Integration Directory in order to consult with details committed actions in the past?
for every objects in ID or IR you can select from objects menu history to check the changes
Regards,
Michal Krawczyk

How to delete unwanted namespaces in Integration Directory

Hi All,
I have made some testing while creating namespaces in Integration Directory. Now I want to delete the unwanted namespaces. Please help me in doing so.
Regards,
Soorya

HI,
If u want delete unwanted namespaces in IR and ID.Please following these steps.
In IR:
1) First u have to select Softwarecomponent.
2)Select u r Unwanted namespace.
3)Delete developed object onebyone.
4)Remove the namespace from Namespace list Press button.
5)Then activate the deleted objects from change List.
IN ID.
1)Select the integration scenario and right click on it..under popup menu select delete.Then auotmatically delete the objects.After u activate all the deleted objects from change list.
Once u complted these steps unwanted objects have been deleted.
Thanks
Ravi

How to retrieve configuration scenarios in Integration Directory?

Hi All,
I am developing a Java program to read all configuration scenarios in Integration Directory. My plan is to find SAP's Java APIs available in the NetWeaver Java stack to read the info I need. I have done lots of searches for such the APIs but still got no luck. Could you help me out?
I'm on NetWeaver PI 7.1.
Thanks,
Viet
Edited by: Viet Phan on May 13, 2011 1:11 PM

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

Integration Directory - how to terminate all logons?

I was importing RFC definitions from R/3 in ID. Laptop battery went down and got disconnected with SAP XI,IB.
After 5 mins, restarted laptop (powered by wire). Opened same SWCV in Integration Directory to change the connection data to point R3 system instead of XI SAP. It gives message "Object SWCV myswcv is currently being edited by user myIDuserid"
This is what I did sofar, but no luck
-logon to XI system, transaction SM04. Terrminate all connections with SAP XI.
Please advise how to terminate all logons in Integration directory? Thanks

Hi,
You can go to 'index page' click on 'administration'. In that you will find on the left side 'administration of locks and caches'. You can click 'lock overview' and unlock the objects.
Regards,
P.Venkat
Message was edited by:
Venkataramanan

Conflict resolution for a table with LOB column ...

Hi,
I was hoping for some guidance or advice on how to handle conflict resolution for a table with a LOB column.
Basically, I had intended to handle the conflict resolution using the MAXIMUM prebuilt update conflict handler. I also store
the 'update' transaction time in the same table and was planning to use this as the resolution column to resolve the conflict.
I see however these prebuilt conflict handlers do not support LOB columns. I assume therefore I need to code a customer handler
to do this for me. I'm not sure exactly what my custom handler needs to do though! Any guidance or links to similar examples would
be very much appreciated.

Hi,
I have been unable to make any progress on this issue. I have made use of prebuilt update handlers with no problems
before but I just don't know how to resolve these conflicts for LOB columns using custom handlers. I have some questions
which I hope make sense and are relevant:
1.Does an apply process detect update conflicts on LOB columns?
2.If I need to create a custom update/error handler to resolve this, should I create a prebuilt update handler for non-LOB columns
in the table and then a separate one for the LOB columns OR is it best just to code a single custom handler for ALL columns?
3.In my custom handler, I assume I will need to use the resolution column to decide whether or not to resolve the conflict in favour of the LCR
but how do I compare the new value in the LCR with that in the destination database? I mean how do I access the current value in the destination
database from the custom handler?
4.Finally, if I need to resolve in favour of the LCR, do I need to call something specific for LOB related columns compared to non-LOB columns?
Any help with these would be very much appreciated or even if someone can direct me to documentation or other links that would be good too.
Thanks again.

How to Change SWCV in Integration Directory for adapters

Because of new SWCV, I have to point all interfaces to new version of SWCV. How can I assign Service Without Party / Business System Service to point to interfaces that require new SWCV?
I deleted and recreated Sender Agreement, Receiver Agreement, Interface Determination, Receiver Determination for new SWCV in Integration Directory but I could not assign or create Business System to interfaces for new SWCV. It is still pointing to old version of SWCV.
Can someone give steps on how I can change the SWCV in the Integration Directory?
Thanks

hi,
>>>>How can I assign Service Without Party / Business System Service to point to interfaces that require new SWCV?
you can only assing once
later on you just ADD them to the scenarios
by using <b>Add to scenario</b> function
Regards,
michal

How to query the conflict resolution actually implemente

Hi all.
Can anyone tell me an easy way to report the conflict resolution procedures that a replicated object has implemented?
How do I know if a table has for example, site priority resolution and how it is done?
In general, is there a script to report all the replication configuration being used?
Thank you.

Assuming you are referring to Streams, you can download a Streams health check script at My Oracle Support (be sure to get the correct version, they cover 10gR1, R2, 11gR1, and R2). The output of the script will detail all of your rules and rule sets, process names, users, and so on. If you are calling a procedure to deal with conflict resolution, the action on error should reflect your procedure name, as an example.
If you are referring to GoldenGate, you can look at the appropriate parameter files (typically Replicat for conflict resolution purposes).
In either case, there is no setting or parameter that tags one source as the primary (or not). That designation is from a coding perspective. This implies that you capture the source of a record so you can evaluate "if error (whatever it is), then use record from source A."

How to create all Integration Directory with Directory API

How to create all Integration Directory
elements (Receiver determination, Interface Mapping, Communication channel Etc ) using Directory API
Can we upload multiple elements in ID from list in Excel sheet

Take a look to this "How TO", can be really helpful for your requirements:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0336199-d3c7-2c10-c983-f8a945a4588c?QuickLink=index&overridelayout=true

How Integration repository is linked to integration directory

How Integration repository is linked to integration directory?

Hi
In the receiver determination u will be specifying
1 .Message Interface ( Has the Message Type and Message has the Data Type)
2. Interface Mapping ( Has the Message Types and the Message Mapping to be Done).
Also u import the ccBPM in the in the Integration Process of ID
Once you activate all the objects in the change list of IR, only then they become accessible to ID through Sender Agreement,Receiver Determination and Interface Determination.
Thanks

How to configure Integration Directory for Integration process async sync

Hi Experts,
I am confused about doing configuration in Integration Directory i.e receiver determination,interface determination and receiver agreement and sender agreement for my integration process as it involve synchronous send at target side.
In my Scenario , we get Purchase order request(asynchronously) from SRM system in proxy xml format which we have to map to Cxml format send it to third party system(say system 2) as http request.Then we will recieve a response from system2 in Cxml format through HTTP.Now,we have to map this response as to SRM system via proxy code for successful and error case .If error occured we also have to mail to the respective department about the error occured via mail adapter.Proxy to XI is a asynchronous communication and XI to System2 is a synchronous communication .Then again XI to SRM is a asynchronous communication via proxy.I have request and response External defination for Cxml i.e HTTP side.
I have done following integration process in ESR
Start- Receive(1)---Transformation(2)-send(3)-Fork(4)--
stop
...................................................................................................... .....[----Branch 1 [-Transformation(5)-Send(6)-
.......................[-----Branch 2 -
SWITCH STEP to check error code[
............................................................................................................[.otherwise branch of switch
Fork(4)----[
.......................[----Branch 1-Transformation (9)-send(10)-
Here,
Recieve(1) -- is used for recieve request from SRM.Mode is asynchronous
Transforamtion(2)-- is used for operation mapping between request of SRM to HTTP request.
send(3) --is used to sending request synchronous to HTTP,mode is synchronous,used synchronous abstract interface,abstract reqhttp and abstract resphttp
switch-switch Branch1 is used for checking error response to be true---
Transformation(5)--- is used to map HTTP response to Mail response structure
Send(6)----
is used to send mail content to Mail adapter
Transformation(9)---- is used to map HTTP response to Proxy response
Send(10) --- used to send mapped proxy response to SRM as to update status by calling calling Function module using proxy code.
Thanks
Deepak

Deepak,
In BPM data does not flow in Backword direction!
take any step in your BPM the message it is goiong to receive will be what a step just before it is giving to BPM.
Now in your case
IR Part:
You have to call Third part Synchronously and the input to it will be what Proxy has given to you.
Create an Abstract Synchronous(in case of abstract you need not bother it is Inbound or Outbound) in which(I mean the Message Interface) The Output message will be what you have Received from Proxy and the input message will be what you are going to receive from the Third party as a Response. Now you would have Inbound Synchronous Interface created for calling Third party.
Have a Interface Mapping between the Abstract Synchronous and Inbound Synchronous Message Interface.
ID Part:
For synchronous Step: BPM will; be sender with Message Interface Abstarct Synchronous
Third Party will be receiver With Inbound Interface(Synchronous). Use the INterface Mapping between Abstract Synchronous and Inbound Synchronous that You have created in IR.
Have a Receiver Agreement for the Thirs part.
No Sender agreement required in case of BPM as a Sender.
Thanks,
Sunil Singh

Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

I just got an iPhone 5 and I'm coming from a Blackberry. I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry. My iPhone 5 syncs great and seemlessly with Outlook using iTunes. I've had no issues as of yet. The problem for me is, it just seems "too" easy. I didn't see anywhere where I could set rules for conflict resolutions. For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other? What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone? (in my case data I've had for over 10 years)
With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first). In my case, I chose to have it ask me whenever it discovered a conflict. So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other. This gave me a lot of piece of mind. Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind. Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all? Again, what would happen if there was a conflict between the two devices?

Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
Once I worked that out, it started working like a dream.
Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
Thanks again.

Access List and Conflict Resolution Problem!

My configuration for Allow and Deny is not allowing me to load images and CSS files through the gateway on a URLScraper channel.
I'm trying to figure out how to control access to resources using the Access List service, and I'm running into trouble. The Sun ONE Portal Server, Secure Remote Access 6.0 Administrator's Guide (Doc 816-6421-10) states:
Setting the Conflict Resolution Level
You can set the priority level for the dynamic attributes. If a user inherits multiple attribute templates, say from an organization and a role assignment, and there is a template conflict between the attributes in the two templates, the template with the highest priority is inherited. There are seven settings available ranging from Highest to Lowest.
See the Administration Guide, iPlanet Directory Server Access Management Edition for more details on conflict resolution.
Unfortunately the referenced Adminstration Guide for DSAME contains exactly 0 occurances of the word "conflict" in its 136 pages, so that reference was less than helpful. Chapter 17 of that document (Doc 816-5620-10) describes URL Policy Agent Attributes, which sheds some light on what the URL Deny and URL Allow settings mean. The key sentence is, "An empty Deny list will allow only those resources that are allowed by the Allow list."
So, I've set up my Access List services as follows:
o URL Deny is blank on all Access Lists
o URL Allow set as follows
---- isp
------- http://portal.acme.com/portal/* (company name changed to protect the guilty!)
---- acme.com organization
------- Conflict Resolution: Highest
------- http://portal.acme.com/portal/* (same as above)
---- Acme Customers Role - shared role for all Acme customers
------- Conflict Resolution: Medium
------- http://www.acme.com/*
------- http://support.acme.com/*
------- http://support2.acme.com/*
---- RoadRunner role - specific role for a specific customer
------- Conflict Resolution: Medium
------- http://roadrunnerinfo.acme.com/*
The Desktop services in each of the above two roles includes channels from the hosts in the URL Allow lists.
The behavior I'm seeing with this configuration is that the desktop channels include information from the scraped HTML, and the URLs are rewritten for the included images and CSS files and such. However, the gateway is denying access to the images referenced by the rewritten URL. That is, an image with a URL of https://portal.acme.com/http://roadrunnerinfo.acme.com/images/green.gif shows up as a broken image on the desktop. Attempting to access the URL to the image directly results in an "Access to this resource is denied !! Contact your administrator" error message.
If I set the conflict resolution on the acme.corp organization to Medium (or anything lower than the two role conflict resolution levels) results in the same error message as soon as the customer logs in (no desktop rendered). The same error occurs if I set the conflict resolution in the two roles to Highest (same as the top level organization), again with no desktop rendered on login.
If I put all the above referenced URLs in the acme.com organization Access List service, then I am successfully able to fetch all the resources (images, CSS, etc.) in the URLScraper HTML. Likewise if I put "*" in that Access List. However, this is less than ideal, as it would potentially allow other customers to view data that isn't theirs (Wile E. Coyote user should not be able to get to Road Runner data, and vice versa, and neither one of them should get at Acme private information!).
So, what am I doing wrong? Also, does anyone have any leads on where I can read up on how Access Lists and conflict resolution are supposed to work, since Sun neglected to include a valid reference in the Administrator's Guide, Portal Server 6.0 SRA?
Thanks!
-matt

Did you ever get anywhere with this. My experiments seem to inidicate that you cannot successfully combine Access and Deny directives, across roles or organizational defaults and a role.

How to do Conflict Resolution in Integration Directory - Urgent

Similar Messages

Maybe you are looking for