How to do create data type for coulmn name as QS$FGD .

hi ,
In my database i have a column as QS$FGD.
How do i map it in XI , since $ is not accepted when u create a data type.
One way is to give alias at the databse level for the column . is there any other way to slove it .
Thanks
amit

Hi Amit,
Were you able to solve your issue? I'm facing the similar issue now. My DB table contains field names with '.' i.e. say xyz.abc. How to solve this??
I feel SP could be an alternative??
Thanks,
Hussain.

Similar Messages

How create data type for coulmn name having special characters in IR

hi ,
any idea how to create how to do create data type for coulmn name having special characters

Hi Amit,
Can you ellaborate ?
Actually if you are reading a file(or anything else) which contains special characters, the data type can be created as done for other interfaces. But it is in the adapters that we actually take care of handling these special characters.
ShabZ

Dynamically create data type for structure

Hello Experts.
how to create dynamic data type for structres. for example.
data lv_struc_name type strukname.
lv_struc_name = get_struct_name( ) ****** this method gives the structure name('ct_struc')
now I want to create one data type, which is having the type of lv_struc_name content.(ct_struct)
thanks
Tim

Hi,
here is the link to really good presentation about generic programming ABAP351.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b332e090-0201-0010-bdbd-b735e96fe0ae
It contains examples how to create dynamic structure and tables.
Cheers

Data Type for HTTP

Hey guys
i have a HTTP to File scenario where in my getting and XML file which has sone tags of this form
<ServiceDateTime dateTypeIndicator="PromisedForDelivery">2007-04-06</ServiceDateTime>
how should i create data type for this?
is this an attribute?
thanx
ahmad

Hi,
Just "Insert Attribute" by right-clicking on ServiceDateTime.
Regards,
Bill

Error while creating data type

Hi
I am creating data type for the scenario from File to IDOC
Namespace urn:xiworkshop:groupxx:legacy is not defined in the software component version NEWPRODUCT , 100 of sap Object Message Type Vendor | urn:xiworkshop:groupxx:legacy references the inactive object Data Type Vendor | urn:xiworkshop:groupxx:legacy
Please help me

Hi;
First activate your namespace and then create the data type.
Namespace + default datatypes should be activated together.
Then your data type
Mudit

How to create the Data Type for the receiver end?

Hello Expertise
I wanted to Create a Data type for Receiver end in PI.
Sender end is ECC.
Receiver end is SRM
Here's the Data type for Sender end as
Can anyone help to create the Data type for Receiver end i.e SRM.
Thanks in advance.
Regards
karan

Hi Karan,
Please don't call Sir, we are just trying to help each other.
Please go through below scenario's and check your configuration.
ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
regards,
Harish

Labview How to specify 1d array of clusters as data types for variant to data

Hi, I'm new to labview. Can anyone tell me how to specify 1d array of clusters as data types for variant to data?

First of all, you should be sure that there is such a data type within the variant; otherwise, you will run into errors.
I recommend you to create the cluster and create a type definition from it. Then drop an array shell from the array palette and drop the cluster type into that array.
Connect that constant to the data type input of the Variant To Data function.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to change data type for a field?

Hi Experts,
I have one std screen having one field having numeric type. So it will accept only numeric value. Remember I am using standard transaction.
Now my user wants to enter the special character like + or - in that field(having data type numeric).
How i can change the data type for the particular field so that it will also accept + or -?
Plz reply me as earliest as possible.
Thanks in advance.

Hi salil ,
u have to change / create Domain of that Data Element.
but u have to check the Implications. i have done the same thing , but that one is Customer defined one , i got nearly 20 short dumps while doing the TP.
regards
Prabhu

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Problem in Creating Data type strcuture for Proxies.

Hello gurus
My scenario is to send data from ECC system to SRM system through proxies. we have to fetch's data from source system and post the data to target system through XI.
Because of massive data coming from source system, I am going for proxy to proxy scenario. What I do not understand is the Data type’s structure.
This is the structure of Data type for sender end
Can anyone help me to create the data type for the Receiver end(SRM).
Thanks in advance.
Regards
karan

hello sir
I have done the config in ESR as-
Data type, message type, service interface, message mapping, operational mapping as well.
while transportation, the data filled in sender is shown in receiver side also.
sir, i need to know now that do we have to do the configuration in IR as well as
Receiver determination, Interface determination. sender agreement, receiver agreement as well .
because ther's no XML created when in go to transaction SXMB_MONI.
help?
Thanks
Regards
karan

How to create output type for GR,GI?

Can any one explain,How to create output type for Goods Receipt,Goods Issue.?
and How to take print out for both?

Hi, jayant in standard u have output type for picking list, delivery doc complete, theres no output type seperately for PGI or PGR
I am sure u need the help of tech guy to create the new output type for ur requirement
regards
giri

Validation while create data type

HI All ,
I have a pop-up in my report that user can create data type in didc,
There is a simple way to support validation for data types ,
I have pop-up where the user need to provide name of attribute
he need to create and the data type for it (char ,string ,int etc )
and he also need to provide the leng of the attribute he want to create
(e.g. char10 ) and also decimal places .
the issue here that i need to do some validation in the pop-up
for e.g. if user choose
case 1
name     - attribute1
datatype - string
leng   - in this case he dont need to provide leng (string )
dec - dont need to provide (string )
case 2
name     - attribute1
datatype - char
leng   - 10
dec - dont need to provide (char )
Any idea how to do this validation in a simple way (maybe to use standard functionlity)
Regards
Alex

HI Keshav.
What i did is created a popup with FM in the popup i have 4 field
the field with the data type which i want to trigger event to it is domain and not ref to FM
The ppoup have 4 field
attr name
datatype
length
decimal
so from what you are say there is not option to trigger event when the user press F4
and choose a entry from it ,
since what i want to do is that if user for instance chose string i want that the next to fields (length and dec ) will be
remove from the popup since he dont need them .
and for he choose char the the decimal field will remove from the popup
Any idea how to solve this issue ?
Regards
Alex
Edited by: Alex Dean on Oct 12, 2010 3:02 PM

Data Type for a Longitude/Latitude Column in an Oracle dB Table?

Greetings All,
What is the recommended data type for a Longitude(Lon) or Latitude(Lat) Column of an Oracle dB Table? I am creating a signs inventory table in our Oracle database to be used as a data warehouse for our signs inventory. The Lon and Lat fields along with some other data will be populated from a MS access file exported from our Geodatabase. Currently the data type for the Lon and Lat fields of the MS access file is defined as "Double". A couple of Examples of the Lon and Lat data are as follows:
Lat                       Lon
59.4564555909     -135.3133542922
64.841125            -148.01808
...What data type should these two columns be defined in the new Oracle database table??? Should the data type be defined as FLOAT(126), NUMBER(10, 6), or else? Any suggestions/help on this would be greatly appreciated.
If the data type is defined as NUMBER(10,6), the first example of Lon "-135.3133542922" will be truncated to "-135.313354" or would I receive an error while trying to import the data from an access file to the Oracle dB?
Thanks in advance for any/all the help.

Orchid,
Is SDO_GEOMETRY available in Oracle 10g?Yup. I'm still on 10g as well; there's no shame in that.
How do I format my lat/long's into WKT and use the SDO_GEOMETRY constructor?The March 16th example shows the steps, but I take it you're trying to get your data from MS Access into Oracle. Is that right? If so, consider these options:
OPTION 1, When you have < 50k records
Simply write a query that returns INSERT statements that you can run against Oracle.
For example, let's say you have a table in MS Access defined as msaCoords (ID, LongX, LatY).
Let's say, your destination table in Oracle is named oraCoords(ID NUMBER, Geometry MDSYS.SDO_GEOMETRY). Then,
SELECT "INSERT INTO oraCoords (ID, Geometry) VALUES (" & ID & ", SDO_GEOMETRY('POINT (" & LongX & "," & LatY & "'), 8307);" FROM msaCoords;
-- "MS-ACCESS QUERY RESULTS"
INSERT INTO oraCoord (ID, Geometry) VALUES (1, SDO_GEOMETRY('POINT (-135.3133542922,59.4564555909'), 8307);
INSERT INTO oraCoord (ID, Geometry) VALUES (2, SDO_GEOMETRY('POINT (-148.01808,64.841125'), 8307);Save those MS-ACCESS QUERY RESULTS to a text-file (D:\MyPts.sql). Launch SqlPlus and type @D:\MyPts.sql
Once it's done, type Commit into SqlPlus and you're done.
OPTION 2, when you have > 50k records
Use SqlLoader. There's an example posted { here | http://forums.oracle.com/forums/thread.jspa?messageID=9412123&#9412123 }
Cheers,
Noel

How to do create data type for coulmn name as QS$FGD .

Similar Messages

Maybe you are looking for