How to do deep reset on NOKIA E5-00.? (*)+(3)+(Cal...

what are the keys to do a hard reset on Nokia E5-00? The default shortcut *+3+Green is not working...

Sorry but reports say this does not work on Nokia E5..
/t5/Eseries-and-Communicators/Nokia-E5-00-Hard-Reset/m-p/785095/highlight/true#M79012
/t5/Eseries-and-Communicators/Nokia-E5-Hard-Reset/m-p/803455/highlight/true#M80046

Similar Messages

How do you hard reset your Nokia N97 phone?.....Re...

There have been so many methods told on here of which none work. How would the Nokia sepcialists do this? I need to reset to delete my existing email accounts.

have you tried this method
http://mynokiablog.com/2009/07/18/how-to-hard-reset-your-nokia-n97/
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to get factory reset on nokia 330

Recently i made a change in the nokia 330 registy with CeRegEditor:
HKEY_LOCAL_MACHINE\init
launch60 = \coreshell\CoreLauncher.exe
changed to :
launch60 = \Flash Disk\patiToos.exe
Now my device doesn't start
appears the nokia logo , then appears a error :
Datei kann nicht gefun....
\Flash Disk\90
Now i want a hard reset for my nokia 330 and i need a USB update image or these files :
eboot.nb0
nk.nb0
splash.bmp

@Slay3r
Unfortunately there was no response to a similar request over a year ago:/t5/Software-Updates/Nokia-330/m-p/655644/message-uid/655644/highlight/true#U655644
Happy to have helped forum with a Support Ratio = 42.5

How to Reset my Nokia 2700 Classic

how can i reset my nokia 2700 classic
Moderator's note: We have amended the title of this post and its replies as it was moved from another board.
Solved!
Go to Solution.

8855942 wrote:
how can i reset my nokia 2700 classic
Being an S40 device you can only Restore it to Factory settings as mentioned on Pg. 47 of the User Guide

HOW THE ************** Do I set up nokia messagin...

HOW THE ************** Do I set up nokia messaging on the 5800? Please if somone can help me I shall burn an effigy in your honour.
First A person in the UK CANNOT set up a Nokia mail account. You go to email.nokia.com, you select your device and enter your phone number. Supposedly you receive a text message with a link to somthing or other, IT NEVER ARRIVES. The site then instructs you to navigate your phone to email.nokia.com. You go there and download nokia messaging (again) and re-install it (again).
You then proceed to to run the set up email program (the pink @ sign that now appears in applications) and go through the process of typing in an email account details. At the end it should ask if you want to add it to a nokia messaging account or not. IT NEVER DOES THIS. It only ever adds the email to the **bleep** inbuilt polling email thing in messaging.
So, the user cannot make a nokia messaging account online OR on the handset which raises question 1.
1. HOW THE HELL DO YOU CREATE A MESSAGING ACCOUNT IN THE FIRST PLACE?
Being no stranger to nokia messaging and after attempting the above several times I decided to use my E72. I removed all my email addresses (so my nokia email account was no longer associated with that device) and set it up for my wife (who owns the 5800). This allowed me to create a nokia messaging account for her (finally).
Now she could log into email.nokia.com and add her email addresses. Now when I entered her email address into the 5800 it asked if it wanted to add the email to her nokia messaging account (FINALLY) and I was able to put her email onto her 5800 through nokia messaging. Phew, it only took 3 hours.
Next step, remove her nokia messaging account from my E72 in order that I may have my account back on my e72. When this was done the wife receives an email telling her that her subscription had been cancelled from her 5800, I assume becasue it detected me using it from my E72 when removing the accounts.
So, I try to re-setup nokia messaging on her device again on, it should be a lot easier as she now has a nokia messaging account right? When I enter her nokia messaging email address it will automatically associate the nokia messaging account with the 5800 again, right?
WRONG
now when I try to set up the email the option of adding the account to the nokia messaging service is never shown instead it adds it as the crumby polling email thing built into the device. This leads me to my 2nd question.
2. HOW THE HELL DO I MAKE THIS USELESS PIECE OF **bleep** WORK?
I am no noob, I have had nokia devices for the past decade and used symbian all the way since s60v1. However this has bowled me over with retarded idiocy.
Do I have to make a pentagram of dku-2 cables with a symbain device at each point facing norway smeared with the blood of a virgin blackberry user?
Please someone, tell me what the **bleep** must do to simply get this **bleep** email to work. I am fuming with rage right now and at the end of my tether.
P.s. No i will not do another hardware reset.
MODERATOR'S NOTE:
Hi,
Language edited by a moderator. Please show some respect towards other users of this public forum.

vi__ wrote:
Next step, remove her nokia messaging account from my E72 in order that I may have my account back on my e72. When this was done the wife receives an email telling her that her subscription had been cancelled from her 5800, I assume becasue it detected me using it from my E72 when removing the accounts.
So, I try to re-setup nokia messaging on her device again on, it should be a lot easier as she now has a nokia messaging account right? When I enter her nokia messaging email address it will automatically associate the nokia messaging account with the 5800 again, right?
WRONG
At the very least you would need to contact Nokia to re-instate your wife's account and I hope you are on Orange as otherwise you won't get very far in the UK as here:
/t5/Messaging-Email-and-Browsing/Nokia-Messaging-Has-Aligned-with-Orange-UK/m-p/764736/highlight/tru...
Happy to have helped forum with a Support Ratio = 42.5

How to format phone memory of nokia 5800 expressmu...

How to format phone memory of nokia 5800expressmusic?

Dial *#7370# followed by 12345 (default Code unless changed by you) when prompted ..
You may also perform a Hard Reset by
Press and hold GREEN + RED + CAMERA keys while powering up. ..Keep the keys pressed until you see the Nokia Logo

How can I restore / reset / recover my phone software?

Hello,
My Smartphone (Nokia Lumia
520), crashed while doing
the procedure How can I restore / reset
/ recover my phone software?
Right now I can not connect it or
the auxiliary software we use to do the
restoration detects the smartphone.
What can I do to complete the procedure?
Note for the fact that meet all the
requirements listed procedure to restore
the operating system and thesmartphone had
charged battery.
Best Regards
Daniel Araujo.

For help using Windows Phone please post in the Windows Phone forums on http://answers.Microsoft.com
The developing for Windows Phone forum is for developers to discuss writing their own Websites Like apps

How to reinstall Firmware 8.63 Nokia C3

Hi'
How to reinstall Firmware 8.63 Nokia C3
help me please
contact
( my name is M )
MODERATOR'S NOTE: We have edited your post as it contains your e-mail address. For your security, we do not allow posting personal or contact information in the discussion board. Thank you for understanding.

are you sure the flashlight is on phone memory and not in memory card? Coz for memory card apps, resets dont do squat.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

HP "Support" does not know how to perform "regionalization reset", now what?

I buy a dual voltage OfficeJet 4620 in Germany in Ferbruary 2013.
NOWHERE in the product literature does it mention the ink cartridges are regionalized (defeats the purpose of even manufacturing a 110-220v device! But I digress).
I move to Florida in June and yesterday my black ink begins to run out.
The printer needs the "regionalization reset" which can only be performed by HP support, as stated by their own webpage:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02558798
Another description of it here:
http://www.fixya.com/support/t156381-change_region_code_ink_cartridges
I call HP support, and waste over an hour and a half with a girl in the Phillipines until she finally tells me that I need a complete set of USA ink cartridges in order to perfom the procedure (which appears to be not true, you do not need them to reset the printer, but rather it appears you need them simply if you wish to print anything after the reset was performed if for no other reason but to verify that the reset was successful). She claims HP support will call me this morning at 11AM EST. They did not call.
I call HP "Support" at 1130 EST and go through the wickets with them again. This time the girl does not know what to do and is clearly completely unknowledgeable about the product, mush less how to troubleshoot it, and instead she is simply following a script. Another hour wasted. After being put on hold for the 4th or 5th time for 15 minutes, I simply hang up. (Realizing later that this is an intentional strategy.)
I call again. Now I am speaking to some guy in India. He does not know what he is doing either and tries to guide me through the support menu on the printer itself, but his script does not match the menu options on the printer. Back to the 15 minute intervals of hold broken up by him saying "one minute please sir while I verify some information". Another hour wasted, until I finally begin to realize that none of these people know what to do.
Still I call back and get another guy who leads me into the Support menu (press the return button 4 times to access this menu) . The he has me go to the Reports Menu and select the "print mech button tap" option, which prints out a 2 page "Printer Hardware" printout. He asks me to "give him the numbers on the document, but the document has all sorts of numbers on it from serial numbers to product numbers to other numbers with labels that are simply abbreviations. I ask him which numbers he needs from the two pages full of numbers, and back on hold I go for 20 minutes. He comes back and says "the long number, there should be a long number". Well the longest number on the document is the Serial number which I have already given during the initial information polling he did and so I ask him if he needs it again. Back on hold i go for another 20 minutes. Now the 15-20 minute hold cycle resumes, with him "checking something" and he will "be right back". Eventually he simply clicks over to see if I am still on the line and immediately puts me back on hold without saying anything. I put my phone on speaker and I wait him out, having already wasted an entire morning and half my afternoon.
Now this was the best part....HE BEGINS TO PRETEND LIKE HE IS HAVING MICROPHONE PROBLEMS AND CANNOT HEAR ME (yes I know, what does his microphone have to do with hearing me, I had the same thought). It is obvious he has simply either taken his headset off his head or moved the mic far away from his mouth and is pretending he can't hear me and that he will call me back and asks for my number. I ask him how is he going to hear me tell him my number (which by the way he already took at the beginning of the conversation) and he continues his ruse. So I hang up. It is obvious he doesnt know what to do and no one else there is going to help me.
Now I call back tonight around 930PM EST, and I get the Phillipines again. I go trough the whole polling phase with the girl and explain to her that I need the regionalization reset performed, and that all I need is to know which numbers of my printer to give to HP Support so that they can give me the code I need to reset this device. I politely tell her that I understand if she does not know what to do or understand what the procedure is and that I will not be angry with her if she is simply honest and tells me so, but that I want her to tell me if there is anyone there where she works who will definitely know how to do the reset, a supervisor or actual technical advisor, anybody. She is friendly and honest and says this is the frst time she has heard of this and she will ask what to do. Back on hold for 5 or 10 minutes. She claims she is looking in her "resources" for the way to do this. Nothing. I ask her to please stop and get her supervisor, she claims she is checking with her supervisor and that they are "checking the resources" for the procedure to reset regionalization. I foolishly think we are making progress.
After 20 minutes of her constantly telling me she is checking her resources, even after I have told her what the procedure entails and that all she needs to do is find the procedure and tell me which numbers it requires from the device itself in order to provide the reset code, I tell her to stop what she is doing and put her supervisor on the phone. She stalls. She says she is sorry but they have never heard of this procedure before and that she will schedule me a call-back for tomorrow. YEAH RIGHT. I ask her WHO is going to call me tomorrow? She replies that it will be them and that they will have the answer. I tell her that I already heard that from them the night before and I dont have another day to be wasted. I tell her to put her supervisor on the phone and I want the name of whoever is in charge of her office. She tries to ignore me and continues to ask for my phone number (which she already has). I press her for the name of who is in charge and she finally claims "Peter" is the supervisor. I tell her to put "Peter" on the phone. 10 minutes of hold and later a guy picks up the line, claims he is "Peter" and asks how I am doing. I politely say I am well and I ask him for his last name. He asks why I need his last name. i repeat my question, "What is your last name Peter?"..........his reply? "hello, sir? I am having trouble hearing you, can you hear me?" He begins to play with the microphone and puts me on hold. Each time he picks up and asks if I am there I immediately ask him for his last name, to which he resumes the ruse that he cannot hear me. I stay on the line. At this point it appears that HP must have some sort of policy where their "Support" personnel are not allowed to hang up the phone first, perhaps it is even tracked as a half-assed internal method of "Quality Assurance", and these people know it and this is why they will leave you on hold for ever and wait until you hang up. So, I wait Peter out for about 10 minutes, I am not on hold because there is no music, the microphone is simply muted. I tell him i know he is there and can hear me, and that i know he cannot hang up first, and then he promptly hangs up.
SO, my question....
NOW WHAT?
How does anything get escalated at HP when their overseas "Support" doesn't know what to do?
I live in Miami and there is a corporate headquarters there for HP Latin America. I am thinking of walking right into the lobby and finding someone with authority, but in all honesty I just want the d*** printer region reset so I can use these ink cartridges I already bought and opened.
Suggestions?

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to get all data from nokia to i5s

how to get all data from nokia E71 to i5s???

if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.

How to Delete and Reset a Lost Root Password on a System With a Mirrored ??

hi All,
we are experiencing problem,lost root password on Solaris 10 Sparc T5120, with mirror root,
and we found the solution from Metalink.oracle.com, has anyone have try this??
here list capture the file system :
Filesystem size used avail capacity Mounted on
*/dev/md/dsk/d10 2.0G 349M 1.6G 18% /*
*/dev/md/dsk/d40 9.8G 563M 9.2G 6% /usr*
*/dev/md/dsk/d30 9.8G 1.4G 8.4G 15% /var*
*/dev/md/dsk/d50 7.9G 310M 7.5G 4% /opt*
*/dev/md/dsk/d600 3.8G 4.3M 3.8G 1% /home*
*/dev/md/dsk/d602 471M 20M 404M 5% /app/controlm*
*/dev/md/dsk/d601 471M 251M 173M 60% /app/ctsa*
*/dev/md/dsk/d604 4.9G 1.1G 3.8G 23% /app/oramon*
*/dev/md/dsk/d603 20G 11G 8.2G 58% /app/oracle*
*/dev/md/dsk/d606 39G 10.0G 29G 26% /proj/iprdb01/orafra/iprod01p*
here the step :
Solstice DiskSuite[TM] Software: How to Delete and Reset a Lost Root Password on a System With a Mirrored Root Disk [ID 1010755.1]
Solution
Steps to Follow
How to delete and reset a lost root password on a system with a mirrored root disk.
1) Insert the Solaris[TM] Operating System CD-ROM into the CD-ROM drive.
2) Once the CD-ROM is in the drive, perform a stop-a. This brings the system down to the "ok" prompt.
3) From the "ok" prompt, perform a single-user boot from the Solaris OS CD-ROM.
ok boot cdrom -s4) At the "#" prompt, determine which disk is the system's boot disk (containing the root file system). There are several Oracle architectures and various configurations of systems when it concerns a boot disk. As a general rule, most boot disks are attached to controller 0 (c0). Usually, their SCSI target is
either 3 (t3) or 0 (t0). However, Oracle machines are very flexible, and the boot disk could be at a different location. If you are not sure which disk is your boot disk, perform the following steps to determine the location of the boot device:
a) # eeprom boot-device
The output might appear to be simple, such as "disk" or "disk1" or more complicated, such as a pathname "/iommu/sbus/espdma@4,8400000/...../sd@3,0:a".
b) Make note of the boot-device. If the boot-device is a pathname, it is beyond the scope of this information to provide the location of the customized boot disk. However, for most configurations,
finding the customized boot disk is an easy task. The "Format" command shows all available disks:
#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
(enter its number): c) Enter d to exit format.
Now, you will have an idea what disks are on the system. Therefore, if the boot-device is "disk" and format shows "c0t0d0" (on some systems "c0t3d0") then that is the boot device. If boot-device
shows "disk1" and format shows "c0t1d0," then that is the boot device. If format shows multiple disks, then based on what the "eeprom boot-device" command shows, the system's boot disk would be:
boot-device format
disk c0t0d0 or c0t3d0 (machine dependent)
disk1 c1t0d0
disk2 c0t2d0
disk3 c0t3d0 or c0t0d0 (machine dependent)
and so on ....
5) Because the system was not brought down gracefully (no root password means having to use the Stop-a keystroke to "crash" the system), you need to run "fsck" to clean the root partition (slice). The fsckalso confirms that you selected the proper slice.
# fsck /dev/rdsk/c1t0d0s0
where the X and Y are determined by the previous procedure. It is also possible to have a root partition which is not on slice 0 (s0), but, again, that is not a standard configuration.
The output of "fsck" looks like this:
** /dev/rdsk/c1t0d0s0
** last mounted on /
** Phase 1 .....
The second line in the output of "fsck" ("** Last mounted on /") confirms that this is the correct root filesystem partition. Answer "y" to any questions fsck asks. There shouldn't be too many items
needing repair. If there are, there is a possibility of a corrupted root filesystem. After fsck is finished, mount the root partition:
# mount /dev/dsk/c1t0d0s0 /a
Again, X and Y are the same as for the fsck command.
For example:
# mount /dev/dsk/c1t0d0s0 /a
6) From the root prompt, set the proper TERM type command (such as vt100, dtterm, sun, and so on)
by entering this command:
# TERM=sun; export TERM
7) Use the VI text editor to edit the /etc/shadow file:
# vi /a/etc/shadow
8) The first line of the /etc/shadow file is the one you want to modify.
It looks like this:
root:c3.yAVmYodWsc:6445::::::
9) Delete every character between the first and second colons in the first line of the file. When you finish deleting the characters, the line should look like this:
root::6445::::::
10) Press the Escape key, then enter the following to save the file and exit vi:
:wq!
11) Use the VI text editor to edit the /etc/system file andremove the "rootdev" line shown below:
# vi /a/etc/system
*rootdev:/pseudo/md@0:0,0,blk
Don't comment out the "rootdev" line. Actually remove it.
12) In the /a/etc/vfstab file, replace the lines for the system filesystem meta-devices with their underlying partitions. For example, change lines from
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
to
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
ONLY change the lines for root (/) and the filesystems that were affected by the actions you took in step 1 of this procedure. All other metadevices may stay as is in this file.
13) Unmount root, check the root filesystem, and then stop the system:
# cd /
# umount /a
# fsck /dev/rdsk/c1t0d0s0
# stop-a
14) Boot to single-user mode:
ok boot -swTHIS STEP IS VERY IMPORTANT; YOU MUST BOOT TO SINGLE-USER MODE TO AVOID FILESYSTEM CORRUPTION.
If the system does not boot to single user mode, you might have made a mistake in the previous steps.
15) Because the root password was cleared in an earlier step, press Return when prompted for the the root password. Once you are in single-user mode, you must clear the metamirrors and all the sub-mirrors for the root filesystem. For example, if root (/) is d0, run the following command:
# metaclear -f -r d0
Running the metaclear command not only clears the metamirror but also clears the submirrors that are part of this mirror.
16) When the metamirror is cleared, continue the boot up to multiuser mode by either pressing CTRL-D or by entering the following:
# exit
Now everything should be as it was, except that the system partition is on the underlying partition and isn't mirrored. You will simply need to re-create the metadevices for the root mirror as you had originally.
many thanks

Hi,
Halt your machine.
Boot with fail-safe mode.
format and list out the disks. (You can get the root & mirror disk (c#t#d#) details from /etc/lvm/md.tab of your root or mirror disk. Earlier explorer output may help)
Mount the root disk and remove the password entry in /etc/shadow
umount it.
Mount the mirror disk and remove the password entry in /etc/shadow
umount it.
reboot the server.
Hope this helps!

How to make a RESET button in labview ?

how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???

abhinavb wrote:
how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???
You seem to have some misconceptions.
Is the array a control or an indicator or just some data held in a shift register or feedback node?
What you are probably looking for is an empty array. An empty array has a size of zero and has no elements (active or inactive). From your mentioning of "rows", you seem to have a 2D array.
The size of the array is independent of the visible size of the container.
Clearing an array means simply writing an empty array of the same datatype to it's terminal (or internal data structure). If the array is a control, you need to write to a local variable of it instead.
Can you show us some code so we can have a better understanding what exactly you mean by "array" in this context? Thanks!
LabVIEW Champion . Do more with less code and in less time .

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

Ipod shuffle 1GB Re: how to resurrect a dead shuffle? Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB) there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on

Ipod shuffle 1GB
Re: how to resurrect a dead shuffle?
Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB)
there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on or conect with USB....
If you can plz help to fiX it
thanx
intel pc , Windows 7, core 2 Dule Core

Here is the answer: go to http://support.apple.com In the search box at the top left type in the number 304996 and hit enter. This will bring you to a page with 4 solutions. Click on solution number 1 and follow the instructions. This should fix it.
bigdogdan

How to do deep reset on NOKIA E5-00.? (*)+(3)+(Cal...

Similar Messages

Maybe you are looking for