How to do default client 800

Hi
friends
i know how to install crm 4.0 and 5.0
but can u please tell me " how to maintain default client 800. once we entered into easy access"
thanking you
siva
Edited by: siva raj on Dec 5, 2008 10:49 AM

Hi Siva,
I dont remember the exact parameter but what you need to do is you need to mention that client number in one of the parameters in the default profile. i.e. RZ10 is the Tocde and for the parameters its RZ11.
Hope it helps you.
Regards
Sidd

Similar Messages

How to Reset Password of Client 800 in SQL server2005 of IDES Ecc6.0

Dear All,
how to Reset Password in SQL server of Client 800 IDES Ecc6.0.
& what will be its password.
with best regards.
Ishtiaq

Hi
Simple logic we have sap* and ddic as default users if you are unable to login to client 800 with any of the user then you need to delete the user sap* from database level so that it will be recreated again and you can login as sap* and password as pass here is the procedure
login to ora<sid>
execute the sql statement
delete from usr02.sapr3 where bname = 'SAP*' and mandt = '800';
commit;
sapr3 is your schema id
You also need to check parameter login/no_automatic_user_sapstar is set to 0 so you can logon as SAP* password pass
If the parameter doesn't exist then maintain in instance profile
/usr/sap/SID/SYS/profiles/SID_DVEBMGS00_Host
Unfortunately you'll need a system restart to enable and disable the parameter
You can also refer to below links
http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
http://www.sap-basis-abap.com/bc/forgot-password-for-user-id-sap-in-client-000.htm
Let me know if you need more help
Regards
Uday

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

How much space does client copy of ECC6 IDES client 800 requires

Hello
Does anyone knows how much space does client copy of ECC6 IDES client 800 requires?

But I do not have enaugh disk capacity at the moment. So I ned to order it
You donot have to perform the client copy actually . You have to just run the test, it will not consume any disk, probably some archive files will be generated
Regards,
Subhash

How to manually retrieve Default Client Settings again

I have a question about Default Client Settings in SCCM 2012.
In our Default Client Settings we've added two AD groups for Viewers of Remote Control and Remote Assistance (Administration>Client Settings>Default Client Settings>Properties>Remote Tools> Permitted viewers and then Set Viewers).
When I logon to a client computer and open Local User manager I can see these two AD groups added to the local group "ConfigMgr Remote Control Users".
For testing I removed one of the member groups that was added.
Now the question; How does the removed group come back to the client? I've ran all the Configuration Manager Actions on the client but this doesn't work. It doesn't add the member which I removed. I also waited 60 minutes to see if it would come back automatically,
but no. Of course I can manually add this group again, but that is not what I want.
Or is the local group for Remote Control only filled the first time the Configuration Manager Client is installed on a computer? Or maybe there is another mechanism which takes care of filling the Remote Control Users group?

Today I added a new AD group to "Viewers".
After that, I ran the machine policy retrieval on my client on which I previously removed a group. After I ran this, de ConfigMgr Remote Control Users group was filled again. This time with 3 AD groups. So the group I removed before was added again and my new
group was also added.
Conclusion; if I make a change to the Default Client Settings it will push all the settings again to a client. But if you make a change locally, like removing a group, SCCM won't update this group again. It seems it doesn't do a verify on local settings
unless something has changed in SCCM itself. Indeed it seems to imply a bug.

What is the default password of Client 800, 811 on IDES 4.7

Just want to know if anybody here still remember the default password of Client 800 or 811 in SAP IDES 4.7?
Thank you very much.

Hi,
Have you tried to Log-in using the default SAP User DDIC with default password 19920706 in 800 and 811Clients ?
Also you can try to log-in using SAP* user with 06071992 password.
After log-in , please create other SAP User with SAP_ALL profile.
Regards,
Bhavik G. Shroff

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

How to create a client other than 800 in sap 4.7E version?

helo can any body tell how to create another client in 4.7 version?points r assured.

Hi Sagarika,
use scc4 for creating a new client
and login to the new client that u created using sap* and pass as password
use sccl over there to do a local client copy
sccl for copying local client
scc9 for remote client copy
Merlin

How to Disply One Client As Default Client In the Logon Window

Hi Experts,
I have One Doubt.
When I Stared SAP Logon Window Through SAP GUI, Iam Getting 001 Client As Default Client.
But I want to Display 100 Client as Default Client in that Place.
I Tried This Through SU01---> Selected Default Profile
--->>Extended Maintenance Radio Button.
Changed 'login/system_client' From 001 To 100.
Then Click on Copy Button. It Asked For Save, I saved it.
But Later I Logon in to the window means iam getting 001 Client only.
If i Went for SU01 Later Means 100 Client is Displaying in 'login/system_client' .
Please Help me in this Issue
Regards
Khanna

Hi Khanna,
Go to transaction RZ10 --> Select DEFAULT profile --> change Parameter login/system_client to 100 from 001. Save and activate the profile. Then stop and start SAP .No need to bounce DB
Thanks
Prince

User id for IDES client 800 is no longer possible

Hi,
I am trying to logon to the client 800 by using the user id IDADMIN by the default sap password. I didn't work, looks like i tried too many times. I am getting the message.
Password logon no longer possible - too many failed attempts.
Any one knows how to unlock this? I tried sap* and ddic, but couldn't logon to client 800. Thanks,
Regards,
Sundar.

Hi Rakesh,
You have mention that we can delete the user from command prompt, pls can you tell me
delete from <HOSTNAME>.<SID>.<object_owner>.USR02 where BNAME='SAP*' and MANDT='000';
what is mean by above <object_owner>, pls can you tell me what do you mean by that.
waiting for positive reply.
Regards
Anil B Bhandary

Creating Client 800 For ECC 6.0

Hi,
I have installed ECC 6.0 IDES in my PC,i able use 001 client with DDIC user name but iam unable to open 800 client.
Can you please tell me how to create client 800 in ECC.
Thanks in Advance,
Regards,
Balu.

Hi
As you said client 800 is already created in defult
Tcode SCC4 check whether you have 800 client entry there,if you have then try to login with to 800 with sap/pass if it doesn't work then you need to delete sap and so that it will be recreated and you can login with sap*/pass
Login to the SQL prompt and execute the following command.
sqlplus"/as sysdba"
sql>delete from sapsr3.usr02 where mandt='800' and BNAME="SAP*";
where,
SAPSR3 is the schema.
mandt is the client
Bname is the user name
You also need to check parameter login/no_automatic_user_sapstar is set to 0 so you can logon as SAP* password pass,you can find this parameter at /usr/sap/SID/SYS/profiles in Default profile or Instance profile
als chek the below links
http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
http://www.sap-basis-abap.com/bc/forgot-password-for-user-id-sap-in-client-000.htm
http://help.sap.com/saphelp_45b/helpdata/en/52/671792439b11d1896f0000e8322d00/content.htm
Regards
Uday

Problem while creating script form - lang EN is not available in client 800

Hi friends,
I getting a problem while creating a script form in SE71.
if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
What could be the problem and how to solve it friends . Please help me.
Thanks
-Hima

Hi There,,
By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
go head and create the Zform, don't forget to activate the form, before calling in the driver program.
In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
Thanks-
Rahul

How to configure dhcp client identifier

Hi Everybody,
The DHCP client ID is an id that is unique for DHCP clients at least in the same subnet. Usually the client uses MAC-address as Client-Identifier in the DHCPDISCOVER message. The Client-Identifier may be different other than MAC-Address, For example a FQDN name, as per the RFC 2132 Ref, (code 61).+_
Usaually, we use the following to bind the ip address based on MAC-address
pntadm -r SUNWfiles -p /var/dhcp -A 10.42.32.86 -i '0:3:ba:a5:a9:93' -a 10.42.32.80
At server side, I am using the following for specifying the FQDN name.
pntadm -r SUNWfiles -p /var/dhcp -A 10.42.32.86 -i 'one.atr.com' -a 10.42.32.80
and at client side, I am inserting the following entry in the /etc/default/dhcpagent file
CLIENT_ID='one.atr.com'
But this is not working. What I am doing wrong.
+1. At the server side, then how to assign the ip addresses to the clients , if the Client-Identifier is FQDN name in the DHCPDISCOVER message other than MAC-Address.+
+2. How to configure the client-identifier as FQDN name at client side.+
Please help me,
Thanks Inadvance,
Mummaneni.

Sandman,
Here is an example of a router acting as a DHCP server. Please remember that you have to exclude IP addresses that you don't want to lease out.
ip dhcp pool example
import all
network 192.168.1.0 255.255.255.0
dns-server 1.2.3.4
default-router 192.168.1.1
ip dhcp excluded-address 192.168.1.1 192.168.1.149
ip dhcp excluded-address 192.168.1.200 192.168.1.254
HTH,
Mark

How to change default Server NFS version in Solaris 10 ?

How to change default Server NFS version in Solaris 10 ?
I need to change default version of NFS server version, currently i have NFS_SERVER_VERSMAX=2, for changing NFS version i changed this variable in /etc/default/nfs, but still its using version 2,
Please let me know where else i need to change./
Thanks a lot in advance!!!

Did you change the /etc/default/nfs on the server or on the client?
What is NFS_SERVER_VERSMIN set to? The NFS server is allowed to use any version in the span of NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX.
NFS_SERVER_VERSMAX=4
The default of NFS_SERVER_VERSMIN is 2.
And, as mentioned, you will have to restart your NFS server for changes to take effect.
.7/M.

How to create new client in XI

Hi all,
Can any one guide me how to create new client in XI.

Hi
To set up a new client, follow these steps
1) Create a client going in to the path
Tools->Administration ->Administration -> Client administration -> Client maintenance
or can also use TCODE scc4
2)Login into the client with
User: DDIC or SAP*
Password
For default password go thru this link
http://help.sap.com/saphelp_nw04/helpdata/en/52/67179f439b11d1896f0000e8322d00/content.htm
Regards
Arpit Seth

How to do default client 800

Similar Messages

Maybe you are looking for