How to do delta using aggregate ineed clear steps

how to do delta using aggregate ineed clear steps

Hi Deba,
If i understood your question corectly:- How to do delta loads to Aggregated Cube.
If yes then it is as normal as loading a delta load into a normal cube.
But only diff will be u need to roll up the cube that has aggregates after the sucessfull delta load.After u do the rollup only the data will be available for reporting.
Here u need to be carefull abt 1 thing is if the data volume grows up in the aggregated cube and if you want to compress the data then u can do it for the Rolled up data only.
Aggregates acts on F-Fact Table & Compression Acts on E-Facttable.
So in process Rollup comes first and Cube Compression will be second. Here we have an option of Compressing the rolled up data in Aggregates this is diff from Cube compression.
Best Regards,
VNK.

Similar Messages

How to do compound attributes ineed clear steps screenshots

how to do compound attributes ineed clear steps screenshots in bw

Hi Desh pandey,
I don't think we have screen shots for all the questions you have posted here. I request you to open help.sap.com and read atleast once. Its a bible for BW and what ever the screen shots or pdf or ppt developed, its the base for everything. You have all the granular level info in that.
-Sonti-

How Creating CFL with using Usertables? Explain Step by Step..

Hi all,
         I worked with CFL for existing tables that means ItemMaster,.. it is fine.but I dont know <b>how to create the CFL with using Usertables</b>?. Please anyone explain step by step.
By,
Suresh.G

Hi Suresh,
      Step 1: Please register an object for your table.
      Step 2: Specify the object code you created in the CFL.
Regards,
C.Manojkumar

How to load hierrarchies using dtp using flat file in bw ineed clear ste

how to load hierrarchies using dtp using flat file in bw ineed clear steps

Hi,
If you want to load InfoObjects in the form of hierarchies, you have to activate the indicator with hierarchies for each of the relevant InfoObjects in the InfoObject maintenance. If necessary, you need to specify whether the whole hierarchy or the hierarchy structure is to be time-dependent, whether the hierarchy can contain intervals, whether additional node attributes are allowed (only when loading using a PSA), and which characteristics are allowed.
1.Defining the source system from which you want to load data:
Choose Source System Tree ® Root (Source System) ® Context menu (Right Mouse Button) ® Create.
For a flat file, choose: File System, Manual Metadata; Data via File Interface.
2.Defining the InfoSource for which you want to load data:
Optional: Choose InfoSource Tree ®Root (InfoSources) ® Context Menu (Right Mouse Button) ® Create Application Component.
Choose InfoSource Tree ® Your Application Component ® Context Menu (Right Mouse Button) ® Create InfoSource ® Direct Update
Choose an InfoObject from the proposal list, and specify a name and a description.
3.Assigning the source system to the InfoSource
Choose InfoSource tree ® Your Application Component ® One of your InfoSources ® Context Menu (Right Mouse Button) ® Assign Source System. You are taken automatically to the transfer structure maintenance.
The system automatically generates DataSources for the three different data types to which you can load data.
      Attributes
      Texts
      Hierarchies (if the InfoObject has access to hierarchies)
The system automatically generates the transfer structure, the transfer rules, and the communication structure (for attributes and texts).
4.Maintaining the transfer structure / transfer rules
Choose the DataSource to be able to upload hierarchies.
Idoc transfer method: The system automatically generates a proposal for the DataSource and the transfer structure. This consists of an entry for the InfoObject, for which hierarchies are loaded. With this transfer method, during loading, the structure is converted to the structure of the PSA, which affects performance.
PSA transfer method: The transfer methods and the communication structure are also generated here.
5.Maintaining the hierarchy:
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy.
PSA Transfer Method: You have the option here to set the Remove Leaf Value and Node InfoObjects indicator. As a result, characteristic values are not transferred into the hierarchy fields NODENAME, LEAFFROM and LEAFTO as is normally the case, but in their own transfer structure fields. This option allows you to load characteristic values having a length greater than 32 characters.
Characteristic values with a length > 32 can be loaded into the PSA, but they cannot be updated in characteristics that have a length >32.
The node names for pure text nodes remain restricted to 32 characters in the hierarchy (0HIER_NODE characteristic).
The system automatically generates a table with the following hierarchy format (for sorted hierarchies without removed leaf values and node InfoObjects):
Description
Field Name
Length
Type
Node ID
NODEID
8
NUMC
InfoObject name
INFOOBJECT
30
CHAR
Node name
NODENAME
32
CHAR
Catalog ID
LINK
1
CHAR
Parent node
PARENTID
8
NUMC
First subnode
CHILDID
8
NUMC
Next adjacent node
NEXTID
8
NUMC
Language key
LANGU
1
CHAR
Description - short
TXTSH
20
CHAR
Description - medium
TXTMD
40
CHAR
Description- long
TXTLG
60
CHAR
The system transfers the settings for the intervals and for time-dependency from the InfoObject maintenance. Depending on which settings you have defined in the InfoObject maintenance, further table fields can be generated from the system.
The valid from and valid to field is filled if you select Total Hierarchy Time-dependent in the InfoObject maintenance. The time-dependent indicator is activated if you select the Hierarchy Nodes Time-dependent option in the InfoObject maintenance.
6.Save your entries.
Depending on which settings you defined in the InfoObject maintenance, additional fields can be generated from the system. Also note the detailed description for Structure of a Flat Hierarchy File for Loading via an IDoc and for Structure of a Flat Hierarchy File for Loading via a PSA.
Also find the below blog for your reference...
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
You can load hierarchy using process chain...
Find the below step by step procedure to load hierarchy using process chain...
http://help.sap.com/saphelp_nw70/helpdata/EN/3d/320e3d89195c59e10000000a114084/frameset.htm
Assign points if this helps u...
Regards,
KK.
Edited by: koundinya karanam on Apr 8, 2008 1:08 PM
Edited by: koundinya karanam on Apr 8, 2008 1:09 PM

How do I use Aggregate formulas with multiple measures from different tables?

I have three measures:
Cash - this sums the £ column in my 'Cash' table.
Online - this sums the £ column in my 'Online'
table
Phone - this sums the £ column in my 'Phone'
table
How do I now do aggregate formulas that combine this three measures, for example:
Find the MIN or MAX of the three measures
Average the three measures
I have worked out how to use simple aggregation like add, subtract etc through the CALCULATION formula, but doing the average or MIN/MAX does not work.
Thanks.

Hi, thanks for the suggestions.
Re: Julian
I had thought about this method, unfortunately it is not always three measures so this doesn't work.
Re: Tim
I was not aware of the APPEND formula however I will definitely give it a try and report back - I can see this one working.
Re: Michael
Apologies, I have never found a an easy way of simulating some of my issues since it would mean creating a new power model and establishing quite a number of relationships. I definitely see the benefit when posting on the forum since it makes my issue far more
accessible, unfortunately when I've posted before I've generally been racing against time and not had time to prepare this anonymised data. Is there a quick way of doing it?

HT204291 my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?

my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?

Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy

How to use Aggregate Functions during Top N analysis?

Say i want to find top 5 highest salaries and their totals and average. In that case how to use aggregate functions. Please give me an example on this.
Regards,
Renu
Message was edited by:
user642387

Hi,
Yes, you can do that with aggregate functions.
First, do a sub-query to retrieve all the salaries (in descending order), then say "WHERE ROWNUM <= 5" in the main query. Use the aggregate SUM and AVG functions in the main query.
Analytic functions are easier to use for jobs like this, once you get familiar with them. If you're not leaving the field this month, then it's probably worthwhile for you to get familiar with analytic functions.

How to use aggregate function with Date

Hi All,
I have a group of date from that is it possible to Max and Min of date.
I have tried like this but its errored out <?MIN (current-group()/CREATION_DATE)?>.
I have also tried like this but it doesnt works
<?xdoxslt:minimum(CREATION_DATE)?>
Is it possible to use aggregate function with date values.
Thanks & Regards
Srikkanth

Hi KAVI PRIYA,
if date is not in cannonical format, how can we change it in BI publisher, then how to calcualte minimum and as well as maximum.
please advise me,
Thanks,
Sri

HT1222 When i double click, May I know how to remove those use app below? Not like previous version I can clear it to stop those app keep on running

When i double click, May I know how to remove those use app below? Not like previous version I can clear it to stop those app keep on running

Swipe up on the thumbnail of the app and it will disappear.

How to do Delta upload and consolidate in SSM, how to use transformer.ini

Hi,
Can anybody explain me how to do Delta data upload and also how to do delta data consolidation in SAP SSM.
Also how can i create and use transformer.ini file.
Thanks and reagrds
Edited by: Himanshu Bisla on Mar 25, 2009 2:09 PM

Hi,
Where from are you planning to upload data?
When you mention a delta upload, does it mean loading new data for a new PERIOD, where no data yet existed, or loading values to measures for periods where data already exists, doing a SUM?
When loading from an external source, you use a READ command, which by default replaces existing values with those that are being loaded. If you add the parameter ADD or SUBTRACT to that IDQL command you are able to change this default behaviour to enable delta loads (with SUM or SUBTRACTION operations).
As for the CONSOLIDATIONS, you can define a date range for the consolidation, or run it for a single period (month, quarter) if needed, or restrict the number of measures you want to consolidate. There is no way to automatically define that only the measures and periods that have new data will be consolidated. This has to be made explicit in the CONSOLIDATE instruction.
Regarding the Transformer.ini, are you planning to use PAS as an ETL tool? Unfortunately, I can only point you to the information that is available on the PAS Help, but that's probably where you found the reference to this function in the first place...
Hope this helps!
Best regards,
Ricardo

How to use Aggregate Persistance Wizard in OBI EE 11g (11.5)

Dear All,
I am trying to use Aggregate Persistance wizard from BI admin tool (11.5).
I created a repository based on SH schema (oracle 11.2) , and then from Tool->Utilities-> menu tried to invoke Aggregat persisatnce wizard.
Very first time I was able to click 'Execute' button by selecting this wizard from the list, but now , no matter wht I can not invoke the same as 'Execute' buttion is permanently disabled.
Please tell me what it the reason for this. Why execute buttion is disableed. IF I select , any other wizard from the list, this button is enabled, but as soon as I select aggregate persistance from the list, the button disables, and I am not able to move forwred.
I ws trying to learn to create aggrages using this wizard, but can not go further as this buttion is disabled. I thought it might have happend due to some problem, so I stoped the BI services , shutdown the laptop, and rstared the BI services, and tried to recreated th rpd from scratch, which I could , but as soon as I go to Tools-Utiities and select aggragate persistance , I can not do it as the exectue buttion is diableed. What is the issue, and how to enable this again.? AM I doing somthing wrong or missing some step.?
Please help me to understand the issue so that I can resolve..
Thanks and Regards
Santosh

Before I read that blog I use another vo for sum but after that blog decide to use analytic fuction becuase we have some page that have to many dvt graph and table and know we use seperate vo for them and it has not good performance and too many query must run in database ,I want to have 1 vo with some analytic function for graph and tables

How to use aggregate functions into Analytical functions

Can we use aggregate functions into analytical functions?
Please provide one example.
Smiles.

HI Learner6
for information:
Aggregate Functions
Analytic Functions
for practic:
ORACLE-BASE - Analytic Functions
Thank you

Report using aggregates or not

Dear All,
how to identilfy my report is using aggregates or directly getting data from cube .
regards,
Anil

Hi,
Go to rsrt>execute and debug>check display statistics data>execute query>go back.
In infoprovider shows a number, it means it hits the aggregate.
You can also chheck this in table RSDDSTAT_DM.
-Mayuri

How to set exceptions for automatic cookie-clearing on closure?

Firefox is forgetting my two-step google logins. On the google two-step verification page, there's a checkbox which says "Don't ask for codes again on this computer."
But firefox keeps asking for codes.
i have firefox set to clear cookies on closing.
i also have the urls below set as exceptions, in two places:
-in about:permissions, they are all set to allow, and also to keep offline data without asking
-in options/privacy/exceptions
mail.google.com
maps.google.com
calendar.google.com
www.google.com
shopping.google.com
plus.google.com
*.google.com
google.com
gmail.com
this forum is messing up my list, above. Each url is a separate item in exceptions. The bulleted one actually starts with a star. (good job mozilla, thanks for this ancient text editor)
how do clear all cookies EXCEPT the ones above, when i close firefox? Or, is this not a cookie problem?
do i need to include "http://"
this article did not help
https://support.mozilla.org/en-US/questions/974020

That worked. (no, it didn't)
It's very confusing that Firefox has settings for how to handle cookies on closing in three different places. They should change that.
"Keep until I close Firefox" seems redundant with "Clear History when Firefox closes" with "Cookies" checked. Then there are settings in "about:permissions". No way to know which one takes precedence. That's poor user-design.
For others having this problem, here's a clear explanation. However, this is only PART of the fix, hoping to find the complete fix later in this thread.
You CAN make FF keep only certain cookies on closing, and erase all others. Here's how to set all cookies to be cleared as soon as you close firefox, except your exceptions:
# Go to Tools > Options > Privacy.
# Under "History", pick "Firefox will Use custom settings for history"
# Click "Exceptions", and add the cookies you want to keep. Click "Close"
# Click "Keep until I close Firefox"
# If you have "Clear History when Firefox closes" checked, then:
* Click "Settings"
* Uncheck "Cookies", and click "OK".
6. Click "OK" to close the settings box.
(now this forum has a formatting toolbar, thx! why didn't have one before?)

How do i delte more than one image at a time from all images folder on iMac

i have 7000 images in the my images folder, how can I delte them all at once?

Click on one folder (if they are nested together in parent folder) and use Select All from Edit menu; then use Move To Trash from File menu. Then use Empty Trash from Finder menu. Same with single images if all of them are in one folder.
Sometimes a folder may be where an application expects to put them, so if that's the case, be sure to leave an empty folder if its part of a system or application. There are times when ownership privilege or user permissions may be lacking, so you may not be able to move or trash them.
Hopefully its not more complicated than this.
Good luck & happy computing!

How to do delta using aggregate ineed clear steps

Similar Messages

Maybe you are looking for