How to do fade from one db level to another?

I have been using Audition for years, and I cannot figure out how to do something in Audition CS 5.5 that ought to be simple. In my waveform editor, I want to be able to select an area of audio and adjust it's gain over time. For example, fade the level from 0 db to 15 db. In Audition 1.5 and 3.0, this was simple. Select your audio range, choose the "amplify/fade" effect, click on the "fade" tab and enter your db values. But I am going BONKERS trying to figure out how to do this in Audition CS 5.5! Can anyone help me? The amplify effect does not do fades. And the Volume Envelope effect only does full fade out and fade in.

No, the Volume Envelope effect in the Waveform Edit view can do anything you want. When you open the effect a yellow line appears on the selected bit of audio, usually just a straight line at the top of the waveform. You can then click on the yellow line to place keyframes wherever you want and drag them up and down to the level that you want.
OK not so simple as the previous versions but much more versatile. You can draw any curve you want or even do amplitude modulation as with the 'Tremors' preset.
You are lucky that I still just happened to have CS 5.5 loaded on my laptop so that I could check for you. Since it is only Win 7 32bit capable, I can't have anything newer than Audition CS 6 installed.

Similar Messages

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

How do you switch from one iTunes account to another on your apple tv?

How do you switch from one iTunes account to another on your apple tv?

Welcome to the Apple community.
I assume you do mean a different account and not simply a different iTunes library. Unfortunately, in order to switch accounts, you would need to log out and log in to the second account.

HT201320 How can I switch from one email user to another?

How can I switch from one email account to another?

You have to select between the two accounts in the mail app.
Say for instance that you are reading an email in your XYZ email account. Tap the button in the upper left corner of the mail app to back out all the way to where you can see all of the email accounts.... Tap InBox, then tap XYZ email Account and that will take you back to the main MailBoxes window.
Is that what you want to know? There is no way to simply "toggle" between the two accounts.

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

How to scan data from one internal table to another

Hi All,
let me know how to scan all from one internal table to another internal table. Pls provide me the syntax and code.
i am very thankful to you all in advance.
Thanks & Regards,
Nagarjuna.

if u want to copy data from itab1 to itab2 then use
itab2[] = itab1[].
if u want to compare whether both itab1 and itab2 are same or not,use
if itab1[] = itab2[].
*--same
else.
*--not same
endif.
if u want to compare itabs based on primary key....
loop at itab1.
read table itab2 with key f1 = itab1-f1.
if sy-subrc <> 0.
*--not same....
endif.
endloop.
if u want to copy only few lines(say from 1 to 3) of itab1 to itab2 then use...
append lines of itab1 from 1 to 3 to itab2.
if internal tables don't have same structure,
say only fields f1 and f2 are common,then
loop at itab1.
itab2-f1 = itab1-f1.
itab2-f2 = itab1-f2.
append itab2.
clear itab2.
endloop.
if there are many common fields then...
loop at itab1.
move-corresponding itab1 to itab2.
append itab2.
clear itab2.
endloop.
Please don't forget to reward points....!!!
Regards
vasu

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

HT204150 How to transfer contacts from one iCloud account to another

How can I transfer contacts from one icloud accunt to another.
After the transfer I want to delete one icloud account have one running.

Are you a Mac or a PC user?
If Mac, export the contacts from Address Book as vCards, log out of the 1st iCloud account, and log in to the 2nd iCloud account, then re-import the exported contacts into Address Book.

In InCopy, how can I paste from one InDesign table to another without also copying formatting?

I'm attempting to paste information from one indesign document to another, but the styles are different. Pasting without formatting not working in a table. When I paste over, it retains the container style from the original table.
I have "Text Only" selected from my Clipboard Handling preferences, so I'm not sure what else to do. I know I can hit escape to switch to the text selection instead of a container, but this only selects the text from one cell. I'd like to copy over the entire table, instead of copying cell by cell.
How can I paste a table into another, without copying the formatting?

Copy/Paste whole cells will always retain formatting.
What you have to do is: Copy/Paste Without Formatting the text contents of the individual cell.
You have to do that individually for each cell, if you want to copy over text of a whole table.
A better approach would be to:
1. Copy the whole table to Excel (or a different spread sheet application)
2. Copy again from that
3. Select one single cell and paste
In that case "Text Only" should be selected from the Clipboard Handling Preferences.
Uwe

How to move phones from one CUCM server to another?

How easy is it to migrate IP phones from one CUCM server to another?
The situation is this:
A vessel currently sitting in dry dock has 14 IP phones onboard which currently register with a CUCM server half way round the world (literally). As you can imagine there is quite a fair amount of delay for the signal processing, not to mention the connectivity being over a VSAT link. This being a temporary solution.
A CUCM server has been configured and installed on the vessel with all the relevant partitions, route patterns, trunks etc. The phones have also been added to the new server ready for migration. The only real thing that will be different when the phones are migrated is the Directory Number on each phone. Both CUCM servers are running software version 7.1.3
The phones currently pick up their local IP addresses via a local DHCP server which assigns 150 TFTP Server IP Address for the remote CUCM server. Is changing the the TFTP Server IP address to the local CUCM server enough to have the phones register with the local server.
This is not something I've tried before so would appreciate feedback or any comments that may indicate anything I missed along the way.
Thanks,
Ric

Hi Ricardo,
On the DHCP scope created for the voice vlan change the Option 150(TFTP Server IP address) to the new CUCM and remove/delete the remote CUCM IP address just to ensure that phones once after registering to the new CUCM will not fetch any config from the remote CUCM as the DN's of the phones are changed on the new CUCM please ensure this.
Apart from this i dont see any challenges as the firmware of the IP Phones will also remain same as CUCM version is same.
Hope that helps.
Regards
Najaf

How to convert music from one apple account to another

how to convert music from one apple account to another

leilaboxergirl wrote:
The apple account music you want to transfer >> go to itunes store and log into the apple account that you want music to be put on your ltunes library...sign in then after you sign in then look down on right hand side for the word "Purchased" and those are the accounts songs and you can download them for free.
Note that this does not change the iTunes account of these songs. This simply adds them to the iTunes library you are using.
Also note than once you do this, you will have to wait 90 days to redownload any iTunes purchases from any other iTunes account, including the original iTunes account.
It is possible to transfer itunes music from one account to another!
No it is not!

How to transfer music from one apple id to another?

I received an iPad and set it up using a new apple id. Can I still access my music from my computer using my old apple id and put the music on my iPad?

You can not transfer music (or anything else, for that matter) from one Apple ID to another. However, the iTunes library doesn't care which ID was used for the purchase. All music, apps, movies, etc. from multiple IDs can reside on the same library in the same iTunes.
Before I continue, I need a bit more information. You referred to your mom's ID and your dad's ID. Do you also have your own ID? Which music and apps, etc. is actually on the iPod? Which music and apps, etc. is actually in the iTunes library?

How to transfer purchases from one Apple ID to another?

Hey guys,
I'm planning on creating a new Apple ID due to an email address change, but am worried that doing so will prevent me from reinstalling any purchases I have made with my old Apple ID.
Does anyone know a way to transfer my purchases from one Apple ID to another permanently?
Thanks in advance for any advice,
Dan

It is not possible to merge two iTunes accounts.
Do yourself a favor, do not create a new iTunes account, simply update the account information for the one you already have.

HOW TO MOVE DATAFILES FROM ONE DISK RAID TO ANOTHER:PLZ HELP ME :=)

Hi all,
For Tunning reasons : perform The I/O from the Instance to datafiles (database). I decide to move some Index datafiles from One DISK RAID to another.
I'm on Linux Redhat Server and Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
My database 's On PRODUCTION and there 're many web applications updating some databases tables and for sure using Index tablespace. I preapared yet my procedure to move datafiles but I'm posting this to be sure that I will not have BAD EFFECTS on my Oracle database.
So I plan without SHUTDOWN MY DATABASE to these steps :
/*Step1 : */
ALTER TABLESPACE INDX OFFLINE ;
/*Step 2 : move datafiles to new disk raid*/
mv /u01/oraindx/DB01/indx01_05.dbf /u01/oraindx2/DB01/indx01_05.dbf
mv /u01/oraindx/DB01/indx01_06.dbf /u01/oraindx2/DB01/indx01_06.dbf
mv /u01/oraindx/DB01/indx01_07.dbf /u01/oraindx2/DB01/indx01_07.dbf
/*Step 3 : */
ALTER TABLESPACE INDX RENAME DATAFILE '/u01/oraindx/DB01/indx01_05.dbf' TO '/u01/oraindx2/DB01/indx01_05.dbf';
ALTER TABLESPACE INDX RENAME DATAFILE '/u01/oraindx/DB01/indx01_06.dbf' TO '/u01/oraindx2/DB01/indx01_06.dbf';
ALTER TABLESPACE INDX RENAME DATAFILE '/u01/oraindx/DB01/indx01_07.dbf' TO '/u01/oraindx2/DB01/indx01_07.dbf';
/*Step 4 : */
ALTER TABLESPACE INDX ONLINE ;
Please verify my procedure and tell me the precautions that I should take care :=)
regards,

Werner,
If this is an active databases (indexes are used),
you cannot set offline the index tablespace.you can offline it.
DAB user:
SQL>create tablespace inds datafile '/oracle/newdb/mydb/inds01.dbf' size 10m;
Tablespace created.
Scott user:
SQL>create table t2 (col1 date, id number) tablespace users;
Table created.
SQL>create index t2_ind on t2(id) tablespace inds;
Index created.
SQL>insert into t2 values (sysdate,1);
1 row created.
SQL>insert into t2 values (sysdate,2);
1 row created.
SQL>insert into t2 values (sysdate,10);
1 row created.
DBA user:
SQL>select segment_name,segment_type,tablespace_name
2 from dba_segments
3 where owner='SCOTT' and segment_name like 'T2%';
SEGMENT_NAME                   SEGMENT_TYPE       TABLESPACE_NAME
T2                             TABLE              USERS
T2_IND                         INDEX              INDS
SQL>alter tablespace inds offline;
Tablespace altered.
SQL>!mv /oracle/newdb/mydb/inds01.dbf /oracle/newdb/mydb/inds0001.dbf
SQL>alter tablespace inds rename datafile '/oracle/newdb/mydb/inds01.dbf' to
2 '/oracle/newdb/mydb/inds0001.dbf';
Tablespace altered.
SQL>alter tablespace inds online;
Tablespace altered.
scott user:
SQL>insert into t2 values (sysdate,20);
1 row created.
SQL>
SQL>select * from t2;
COL1              ID
22-NOV-07          1
22-NOV-07          2
22-NOV-07         10
22-NOV-07         20
SQL>commit;
Commit complete.

Can I and How do I copy from one iWeb site to another.

I currently have a few different versions of my web site stored as different doman.sites I would like to copy a blog entry from one into another. Is it possible to do that and if so how. I am sure I could copy all the text and all the pictures separtly and then paste them in, but that would be tendious as I would either have to keep opening and closing iWeb between the different versions or have them both open on separte accounts on my computer and keep jumping back and forth between them. Any suggestions? Let me know.
http://web.mac.com/captrustywildrice/
[email protected]

what exactly would I copy from one folder to another to be sure that the blog entry that I am copying shows up in the blog menu? I would like to be able to copy everything together, dates, links at the bottom, hit counter and all, rather than piece by piece off of the site or from another iWeb account. Thanks!

How to do fade from one db level to another?

Similar Messages

Maybe you are looking for