How to do FCC with SFTP adapter (BIC MD tool)

Dear All,
Hi guys...can anyone tell how to do FCC with SFTP adapter (Seeburger).
Can BIC MD tool do the FCC required. can anyone provide link which tells steps to perform FCC with BIC MD.
we know that we can use the standard module for it. but we are trying to explore this BIC MD and its limitations.
Regards,
Senthilprakash

Hi,
Im closing this thread as its open for long time now.
well i have even found the solution for the same.
SFTP adapter as such does not have FCC functionality.
we have to use SAP Modules for performing FCC in SFTP adapter.
for complex conversions (more than 3 levels) we can use BIC tool and then deploy the module in our adapter.
Regards,
Senthilprakash.

Similar Messages

  • Problem with SFTP Adapter

    Hi,
    Last year we made the upgrade in our PI server to enable SFTP adapter. Our version is SAP 7.1 ehp 1
    When trying to use this adapter (We attached configuration in the message), this gives us an error.
    This is the error log:
    Exception received while check for additional files: String index out
    of range: -1
    On the other hand, the communication channel fails when it try to process any of the file list but doesn't gives us any log error.
    Is it a problem of configuration required for SFTP adapters? If so how should indicate our filters to properly process messages?
    Thanks and best regards.
    Mónica

    Hi Iñaki,
    We configured our channel  as it show the note 1988592 - SFTP Adapter not picking files with *  
    But we have the same error:
    Exception received while check for additional files: String index out of range: -1
    I attached the screenshot
    Thanks and best regards

  • How to test Scenario with AS2 adapter..!!!Very Very Urgent..!!

    Hi All,
    We have provided the partner details like AS2ID,URL,Port and certificates.
    They ask me to do some sample testing whether files are reaching to partner system or not.
    I done all the required steps in IR and ID...
    1. Can anyone suggest me how to do the testing
    2. Where to monitor for AS2 messges?
    3. How to see the our output files whether we are sending the correct files or not?
    4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
    5. Inbound-- How we will come to know whether file has sent to us or not?
    Someone pls explain step by step how to do the testing using AS2 adapters for both Outbound and Inbound.
    Its Very Very urgent.
    Waiting for your replys..
    Regards
    Deepthi.

    Hi Deepthi,
    1. Can anyone suggest me how to do the testing
    A) Like message monitoring in RWB we have a particular link to monitor the message through differnt seeburger adapter.
    I dont remember the link right now.
    2. Where to monitor for AS2 messges?
    A) Through the same link.
    3. How to see the our output files whether we are sending the correct files or not?
    A) u mean to check the output file data or strucutre if strucutre is not proper then u will get the error message and ur mapping fails.
    4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
    I have no idea.
    5. Inbound-- How we will come to know whether file has sent to us or not?
    File is sent over wan so when it will be pickd up by XI.
    Thnx
    Chirag

  • Dynamic filename creation with Seeburger's SFTP adapter

    Hi Experts,
    I read in one of the forum that Seeburger's SFTP adapter supports dynamic configuration.
    My requirement is i need to dynamically create a file name and put it into a predefined folder(of a third party system) with SFTP adapter.
    Can any one help me with some blogs/Materials on this?
    Thanks,
    Niranjan

    HI,
    Have you look into the blogs mentioned in below forum
    How do we do File content conversion using SFTP SEEBURGER Adapter
    Thanks
    Swarup

  • Issue with network or SFTP adapter

    Hi Guys,
    we have found a case where a file has been received empty by the receviers, although we can see in PI that message contains data and transmitted successfully from AE.
    Please note that SFTP adapter is being used here and file contains encrypted data which is being sent outside the organization network.
    Can it be network or there is issue with SFTP adapter?
    Let me knw if you have any queries.
    Regards,
    Aki

    there was no error occured in AE monitoring as per logs it processed successfully, but receiver party which is outside organization network complained saying that they receive this file empty.
    Logs for your reference received by third party:-
    2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 >>FILE INFO: D:\ftp\kunden\File Name was opened. Sharing is 1. File Handle is 0x00000b24.
    2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 Did not receive any data, Error=1506, SubError=0, WSAError=0
    2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 >>FILE INFO: D:\ftp\kunden\File Name was closed. File Handle is 0x00000b24.
    2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 Finishing STOR, Triggering events manager for FX_EVENT_FILE_WRITE_SUCCESS
    2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 RESPONSE: 226 Closing data connection. Transferred 0 bytes in 1 seconds. 0KB/second.
    where in PI we could see message contains data and message has been successfully processed, could it be issue on receiver end?
    thanks.

  • Problem with BizTalk server 2013 SFTP adapter on Cloud VM

    All, 
    We have deployed Microsoft Biztalk Server 2013 Enterprise edition on a cloud VM. We are facing an issue with SFTP adapter to receive. Following are the details; 
    On this VM, we are facing an issue with BizTalk server 2013 SFTP adapter. The SFTP location can receive and send message through SFTP clients and .Net code. But using BizTalk server 2013 SFTP adapter we are only able to send the file on SFTP location but
    could not receive the files from same location.
    We are getting  just one line error in system event log that is :
    Event#7011. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BTSSvc$BizTalkServerApplication service.
    Regards, 
    Shoaib Danish

    Hi
    BizTalk Server 2013 is available on Windows Azure. BizTalk Server 2013 can be installed locally on your hardware
    and in Windows Azure as a virtual machine. Please follow the procedures to check it on your side.
    Configuring BizTalk Server 2013 on a Windows Azure VM
    Create a BizTalk Virtual Machine in Windows Azure
    Create the BizTalk Group Prerequisites
    Configure the BizTalk Group
    Best regards
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • FCC in SFTP

    Hi Experts,
    Can someone explain how FCC can be performed on this file
    HEADER:ABC:XYZ
    1234 aJHJS
    1245 AJSHJD
    7895 WSTA4556
    4588 AHGSDJ_AHSHA
    END
    to get this into following structure
    <?xml version="1.0" encoding="utf-8"?>
    <ns:MT_Source xmlns:ns="Some/address">
    <Record>
              <Value>HEADER:ABC:XYZ</Value>
         </Record>
         <Record>
              <Value>1234 aJHJS</Value>
         </Record>
         <Record>
              <Value>END</Value>
         </Record>
    where each line of the file is taken into the field 'Value'
    Thanks in advance,
    Vishal

    Hi,
    If you can see sFTP adapter in adapter type then check its namespace. it shoudl be seeburger or aedaptive solution or anything like this.
    go to their webpage and see whether they support FCC or not. Also check the possibility of using modules (so that you can use palin2xml module, if they dont support fcc) with the adapter
    All third party vendors shoudl support this functionality of converting plain to xml
    Regards
    Sura

  • Query regarding sftp adapter

    Hi
    Is there any way we can use dynamic configuration with sftp adapter ?
    Requirement is that I need to retrieve input file name and use that somewhere
    but for sftp sender I could not locate adapter specific message attributes.
    Does that mean its impossible to retrieve file name during runtime?

    Hi Akhil
    have  a look on this links
    Standrad File adapter shipped with XI does not support SFTP. You can may be consider using FTPS ( File Transfer Protocol using SSL/TLS ).
    Check this link for further info,
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/content.htm
    For HTTPS and FTPS, you need to define if your communication will have certificate authentication, user authentication, none or both. User/password you enter in the adapter parameters, it's simple. For certificates, you need to import (load) it on Key Storage service, service_ssl view, on Visual Administrator (or create the key pair certificate on XI and then sign then on some Certification Authority, on the same service). Check http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm for further information.
    HTTPS / SFTP with XI
    Need Some Pointers for adapter development
    there's a sample adapter shipped with the XI
    /people/gowtham.kuchipudi2/blog/2006/01/04/testing-sample-adapter
    Fle Adapter connection to SFTP server ove SSH
    sftp adapter creation
    Thanks !

  • SFTP adapter error : Catching exception calling messaging system

    Error: com.aedaptive.sftp.adapter.SFTPException : Not all messages were delivered succesfully
      Could not deliver message to XI: com.sap.aii.af.lib.mp.module.ModuleException: senderChannel 'ca09269447583427adc545f8c23d244b': Catching exception calling messaging system
    This is error message which i get in sender communication channel while working  with SFTP adapter.

    Hi Pooja,
    I think it would be better to add getcause() to get the cause of the issue.
    Ref: http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/aii/af/lib/mp/module/ModuleException.html
    Thanks,

  • How to configure SFTP Adapter in XI?

    Hi All,
    How to configure SFTP adapter in XI?, It would be great if anyone sends a step-by-step documentation on the same.
    Thanks in advance

    Hi,
    About SFTP .
    1) SFTP (Secure File Transfer Protocol)
    "SSH File Transfer Protocol" or SFTP is a network protocol that provides file transfer and manipulation functionality over any reliable data stream. It is typically used with the SSH-2 protocol to provide secure file transfer. SFTP encrypts the session, preventing the casual detection of username, password or anything that is being transmitted. One key benefit to SFTP is its ability to handle multiple secure file transfers over a single encrypted pipe. By using a single encrypted pipe, there are fewer holes in the corporate firewall.
    SFTP:
    As per the latest SAP PI/XI support pack, it does not support SFTP via File Adapter.
    So alternative approach to cater this requirement from XI is to make use of Unix Script at OS level to transfer the files from/to third-party systems.
    Inbound Interface - i.e. third-party system ->XI->SAP: 
    File is transferred to a folder in SAP XI landscape from the third-party legacy system using UNIX Script with secured protocol. Once the file is ready in the XI landscape, File Adapter will poll this directory and file is picked up by NFS protocol.
    Outbound Interface – i.e. SAP->XI->third-party system: 
    XI is responsible for writing a file into a folder in the XI landscape. These files are transferred to the third-party system by executing UNIX scripts with secured protocol i.e. via sFTP.
    Pre-Requisites: 
    Public key should be exchanged between external systems and the PI system.
    UNIX shell script has to be developed and scheduled.
    Advantages: 
    Highly Secured.
    Ability to handle multiple secure file transfers over a single encrypted pipe .By using a single encrypted pipe, there are fewer holes in the corporate firewall.
    Disadvantages:
    Two-Step process i.e. XI>Temporary folder>External System and vice-versa
    Files have to be temporarily stored in XI server.
    Multiple failure points i.e. XI and Unix script execution
    Maintenance of an external UNIX script.
    Difficulty in monitoring the execution of the shell script as it cannot be monitored thru XI.
    Need to generate keys and install it in the SFTP site as a pre-requisite i.e. SFTP clients must install keys on the server.
    SFTP uses keys rather than certificates. This means that it can't take advantage of the "chains of trust" paradigm facilitated through Certificate Authorities.
    Files from the XI server should be deleted/archived in a periodic manner to increase the disc space so that it will increase the performance.
    Note: UNIX shell Script can be executed as a background job ‘or' can be triggered from SAP XI through OS command at File adapter level.
    Check the links.
    Secure FTP (SSH) with the FTP Adapter
    Secured File Transfer using SAP XI
    Secure FTP in SAP XI
    Regards,
    Phani
    Reward points if Helpful

  • SFTP with FTP Adapter - Missing class: com.maverick.ssh.SshTransport

    Hi,
    I am trying to use the SFTP with FTP Adapter for a project requirement.
    I have followed the steps as mentioned in the below link
    http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CACDFFFB
    Have configured the oc4j_ra.xml file, but after creating a sample BPEL process with the FTP adapter, got this error message in the log file.
    <2010-04-12 11:21:16,493> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Uncaught exception oracle.classloader.util.AnnotatedNoClassDefFoundError in JCA-work-instance:FTP Adapter-4 - cause:
    Missing class: com.maverick.ssh.SshTransport
    Dependent class: oracle.tip.adapter.ftp.SshImpl.SshImplFactory
    Loader: FtpAdapter:0.0.0
    Code-Source: /D:/product/10.1.3.1/OracleAS_1/j2ee/home/connectors/FtpAdapter/FtpAdapter/ftpAdapter.jar
    Configuration: <code-source> in D:\product\10.1.3.1\OracleAS_1\j2ee\home\connectors\FtpAdapter\FtpAdapter
    The missing class is not available from any code-source or loader in the system.
    I tried getting a trial licencse for the maverick SSH tool from http://www.3sp.com/requestEvaluation.do?productCode=MAVERICK as discussed in one of the threads, but it redirects to http://www.barracudanetworks.com/ns/products/sslvpn_overview.php
    Could anyone please help in this?
    OR
    Provide steps on how to use SFTP with FTP Adapter.
    Regards,
    Varun

    Hi,
    Thanks for the reply.
    As per client's requirement, we shouldn't be using java service for this functionality.
    And as you said, the oracle adapters are not taking anywhere, but guess have no other choice..
    Cheers,
    Varun

  • BizTalkServer 2010 SFTP Adapter from CodePlex - Configuring send and receive locations with SSH public and private keys

    Hi there,
    I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
    Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
    Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
    Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
    For Send port: 1. we would need to encrypt the file with our business partners public key
                          2. sign the file with our private key.
                          3. Send the file through to SSH client which eventually transfers to Remote server.
    Receive port:   1. Connect to SSH Server with SSH-2 key and receive the file
                          2. Verify the file's digital signature agaisnt the Business partners PGP public key
                          3. Decrypt the file using our PGP Public key
    Thanks in advance

    Yes it is supported.
    You can find its documentation in this link 
    You can find section X.509 Certificate Identity Keys
    You can set public and private key in property SSH Identity thumbprint  of send and receive port
    I prefer to test it using client tool like
    FileZilla or WinSCP then test it using sftp adapter
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

  • BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

    Hello, 
    We have a requirement to connect SFTP secure site with the private key and polling files.   Initially I have
    tested BizTalk Server 2013 SFTP Adapter receiver Port using  Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
    However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
    did not poll any files from SFTP Site.  I added only one file to SFTP Server ( 145 kb file) for testing purpose.
    However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
    I could not find any errors in Event viewer also.  I can download\upload file using WinSCP tool .
    So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter  is also working find
    without any issues for Client SFTP Site.
     This is the configuration on SFTP Receive Adapter
    This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool. 
    <o:p></o:p>
    Appreciate your help on this.<o:p></o:p>
    Thanks<o:p></o:p>
    PrabathD<o:p></o:p>

    BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
    The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
    submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
    Set your poll interval to a non-zero value and check the behavior.
    Regards.

  • How do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv, how do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv?

    how do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv?

    get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG
    get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG
    get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG

  • How to file mask in sender seeburger SFTP adapter

    Hello Gurus,
    Please help on
    How to perform a file mask in sender seeburger SFTP adapter? eg. I want to pick all the files but not *.tmp files.
    thanks
    Kishore

    Kishore
    A work around:
    Use another interface File to file (By pass) using file adapter which does the mask exclusion of the file which are not required.
    Regards
    Raj

Maybe you are looking for