How to do Finder Search using Name Contains in 10.8.2

I just purchased a MacBook Pro with 10.8.2 installed. I used Migration Assistant to move my account from my old MacBook Pro which was running 10.7.8. On my old MacBook, a search for a file in a finder window dropped down to let you select "name contains", so you could type in just a bit of the filename to find a file. On my new MacBook, when I do the same thing, all I get is "name matches", which is much less useful. How do I get back to being able to use "name contains" or maybe even other options like "name starts with"??

As OS X Mountain Lion is registered to your Apple ID, you have to install the OS X version that came with your Mac or Mac OS X Snow Leopard, so he will be able to purchase Mountain Lion from the App Store.
To do it, just follow these specs:
1. Back up the data you need.
2. Insert the Snow Leopard DVD and press C key while your Mac is starting to start from the disc.
3. Go to Utilities menu > Disk Utility, select the hard disk at the top of the sidebar, go to Erase tab and erase the disc.
4. Close Disk Utility and reinstall Mac OS X. When the installation has finished, press the mouse while your Mac is starting to eject the DVD, and turn off the Mac.
You could also give him the Mac with Mountain Lion, but as he's using a different Apple ID, it's not legal and he could have problems if he needs to reinstall OS X, because the Mac won't allow him to reinstall it

Similar Messages

Using query ID how we can find query tech name in BW 3.5

Using query ID how we can find query tech name in BW 3.5
I got this querry ID from RSDDSTAT table for one user.
Thanks

SE16 --> RSRREPDIR --> give your id and get the tech name of the query and other info.

Who's Who: How to refine employee search using customer defined indicator?

Hello,
It is possible to refine employee search using status indicator STAT2 (Employees' Employment Status). I would like to refine employee search using e.g. Customer defined status indicator STAT1. I created an entry identical to STAT2 but with STAT1
in view V_T77S0 but it did not help at all.
How to refine employee search using customer defined indicator or any other info
from infotype 0000 or 0001?
Kind regards,
Pawel

Hi
This could be done using the infosets provided in who's who customization screen.
Pl go through following help.
If this helps, pl do reward.
Who's Who (ESS): Selection and Output
In this activity, you can change the fields for selecting and outputting data for the Who's Who service. The fields of the underlying InfoSet Query are available. Note, however, that text fields cannot be used for data selection (with the exception of the fields Organizational Unit, Position Name, and Job Name).
You have the following options:
You can specify the fields for selecting an employee.
You can specify the fields for the hitlist, that is, the list of all employees who meet the selection criteria.
You can specify the fields for the detail screen for a selected employee.
All selected fields are automatically transferred to the service in the sequence you chose and are then available for selection or output.
Standard settings
The standard system contains an InfoSet for the service. It contains default selection and output fields.
Activities
1. Check whether the default settings fulfill your requirements.
2. If you want to change the default values, proceed as follows:
a) Choose the relevant tab page and remove the indicator in the Use default settings for group box.
To change the selection fields, choose the Selection Fields tab page.
To change the fields of the hitlist, choose the Output Fields List tab page.
To change the fields of the detail screen, choose the Output Fields Detail tab page.
b) If you want to delete a default field, select the field in the relevant tab page and choose Delete Line from Display Table.
c) If you want to add an additional field from the InfoSet, select the field in the Fields in InfoSet group box and choose Copy Entry from InfoSet Table. You have two options:
You select an existing field in the tab page and choose Insert Entry in Display Table. The system copies the InfoSet field and inserts it above the selected entry.
You select the blank field at the end of the tab page and choose Insert Entry in Display Table. The system copies the InfoSet field and inserts it at the end of the tab page.
Note that the sequence of the fields in the tab page determines the sequence of the fields in the service.
The selection screen fields are laid out according to the following pattern (maximum of 4 rows and 20 fields):
1 I 2 I 3 I13 I17
4 I 5 I 6 I14 I18
7 I 8 I 9 I15 I19
10 I11 I12 I16 I20
The fields in the detail screen are laid out underneath each other for a maximum of 20 rows, while the fields in the hitlist are laid out from left to right for each row, for a maximum of 20 fields.
Note: You cannot select by the Employment Status field (P0000-STAT2).
d) If you want to add a new field that is not in the InfoSet, you have to create a new InfoSet. You then assign the required field to the new InfoSet. Then select the new InfoSet in the InfoSet field in the Parameters group box. Proceed as described above to add the field to the relevant tab page.
For information about creating InfoSets, see Specify InfoSets for Interactive Employee Selection in the IMG for the HR Information System.
Not the SAP naming convention for the standard InfoSet: /SAPQUERY/HR_XX_PA_ESS
The country code "XX" stands for "international." The InfoSet itself is in the global area (cross-client). You can create customer-specific InfoSets by copying an existing entry. Take account of your customer namespace and set the relevant country code.
Note: The Personnel Number field (P0000-PERNR) must not be added to the InfoSet. If you want to use the personnel number, use the P0001-PERNR field, for example.
e) In the Sort field of the Output Fields List tab page, you can specify the sort sequence in the hitlist.
Example: You have selected the Last Name and First Name fields for the hitlist. You want the hits to be sorted first of all by the employees' last name, then by the first name. You therefore enter 1 for the last name and 2 for the first name in the Sort field.
f) Once you have completed your modifications, choose Check Display Table. If the check was successful, choose Save to save your changes. If inconsistencies were found during the check, a message in the relevant line notifies you of them.
Further notes
In certain circumstances, runtime issues may occur, especially in data selection. If they do, set the Selection Fields indicator in the Use Default Settings for group box. This deactivates the use of the InfoSet Query; instead, the system uses the BAPI_EMPLOYEE_GETDATA method.
You can switch the hitlist and the detail screen to the BAPI_EMPLOYEE_GETDATA method by setting the Output Fields List and Output Fields Detail indicators.
Note that by setting an indicator, you restrict the field selection in the relevant tab page to the interface of the method.
If, in the initial screen, you enter a country for which values have not yet been defined, the system automatically creates an entry that sets all indicators in the Use default settings for group box. You can then edit the entry to suit your requirements.
You can specify whether you want employees' photos to be displayed in the service in the IMG for Employee Self-Service under Determine User Options.
If this helps, pl do reward.

How can I find the dns names ?

those what are made in the control panel...

how can I find the dns names ?That is OS specific thus you must either use Runtime.exec() or use JNI to get to the names.
If you search this forum you will find more specific suggestions on how to get them.

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How do I find out the name of an area menu?

I can see a report with a specific t-code in an area menu, how can i find out the name of the area menu, when i need to edit it in se43?

Do a where used list for the tcode in SE93. select area menu in the list.
Regards
Sridhar

How do I find out the name of my wireless chipset/interface?

I'm doing a install of Arch and I need to setup my WLAN.
So the wiki says:
"After finishing the rest of this installation and rebooting, you can connect to the network with wifi-menu interface_name (where interface_name is the interface of your wireless chipset). "
How do I find out the name of my interface?
Last edited by psycho_tea_drinker (2013-07-03 12:36:40)

psycho_tea_drinker wrote:
hokasch wrote:
Check your chipset (lspci), see if the corresponding kernel module got loaded. Look for dmesg errors. Another way to check device names (from the wiki):
$ ls /sys/class/net
How do I check if the kernal module got loaded?
lspci | grep net
> only shows my ethernet controller
lsusb
> does not show it ethier
I forget to mention that it is a USB wifi dongle (Tplink TL-WN722N). And I'm also running within virtualbox - I hope that does not complicate matters?
Probably. You'll need to make sure that VB guest can see your USB ports. You'll need the VB wiki pages for that though.
I don't use it, so can't help, sorry.
Last edited by skanky (2013-07-03 13:12:46)

How do I find the image name and media_link for an ubuntu image in the Gallery?

I am trying to create VM using Python API.
I have a custom Linux image:
image_name = 'cloudN-Azure-20150205-os-2015-02-05'
media_link = 'https://portalvhds10ssz63zgvb9g.blob.core.windows.net/vhds/cloudN-Azure-20150205-os-2015-02-05.vhd'
When I used this image to create VM, it failed.
I would like to use the ubuntu 1204 image in the Gallery.
How do I specify the image_name and media_link in my Python code? Basically, where and how do I find the image name and media_link for an image in the Azure image Gallery?
Thanks in advance...

hi sir,
Did you try to use "List OS Image"? we can get the property form the results:
result = sms.list_os_images()
for image in result:
print('Name: ' + image.name)
print('Label: ' + image.label)
print('OS: ' + image.os)
print('Category: ' + image.category)
print('Description: ' + image.description)
print('Location: ' + image.location)
print('Affinity group: ' + image.affinity_group)
print('Media link: ' + image.media_link)
print('')
Please try it. Any questions or it doesn't work, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Where or how do I find the installation package containing "iTunes.msi"?

I have iTunes 10.5.3.3 installed on my computer with a Windows XP operating system. I have tried to download the new itunes 10.6 but continually get a pop up which states "The feature you are trying to use is on a network resource that is currently unavailable. Enter an alternate path to a folder containing the installation package "iTunes.msi". I have tried and failed to find this package.
I have also tried the support page suggestion by uninstalling the old itunes and then install the new one. This did not work. Another pop up also tells me that I cannot remove the old (10.5.3.3) itunes...because..." the feature I am trying to use is on a network resource that is currently unavailable". I am caught in a loop. It appears that I need to locate the "iTunes.msi" installation package in order to be able to uninstall the old and replace with the new iTunes upgrade.
Where or how do I find the installation package containing "iTunes.msi"? Secondly, when I find it is there anything special I need to do or be aware of?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How do I find the administrator name is 10.7?

how do I find the administrator name is 10.7?

You can use reset password utility to find out the names of the users.
You are not going to rest password here.
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Click inside the box and that should reveal the names.
Stop here. Close windows and quit all apps and restart.
Finder > Macintosh HD > Users
You can find the shortnames there.

How can I find my user name password as I only remember the administrator password for the MacBook?

How can I find my user name password as I only remember my administrator password?I don't want to lose things or content.

If you have only one account, then your admin password is your user password. If you use another account that is not an admin account, then log into your admin account from which you can change the password on your user account.
Forgot Your Account Password
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

How could I find the register name?

I'm using Rslinx OPC server according to the Tutorial, and when I follow the 16th step in " Configuring an Allen Bradley PLC in RSLinx ", I find that I can not successful do "type the register name you are trying to get data from or writing to".
So I wonder how can I find the register name needed?
nelly

Hi nelly, which NI software are you using and what application you want to achieve?
Would you please give me more detailed information ,thanks!

How do i find out the name of my out going server?

Trying to set up an email account. It's asking , "what's the name of you out going server?" I don't know the name of my outgoing server. How can I find out the name of my "out going server?" Thanks in advance for any help on my question.

Your provider names their servers. You need to ask them or do a search for email settings for your provider.

How do I find and use the "Spotlight Effect" in PS6?

How do I find and use the "Spotlight Effect" in PS6? I was using it yesterday and now I can find it ... help!

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

HT4995 I lost my ipod touch--how do i find it using location services?

I lost my ipod touch-how do I find it using Location services?

Joel Zimmerman wrote:
I lost my iPod touch in a club last Saturday. Was on, had a passcode on it but I didn't have Find My iPhone installed. I'm not sure if this is correct information, but an Apple store clerk said that I would still be able to track it if I had registered it with iCloud, which I have done
What you needed to have already done was to have went to Settings>iCloud and turned FindMyiPod on.
. The problem is, though, even if this information is true, how will I be able to find it? It's an iPod touch with no GSM/CDMA capabilities. Therefore, it cannot be found unless it was connected to Wi-Fi.
For location the iPod uses the location of nearby wifi routers that are in Apple's database. Thus, wifi has to be on.
But how would that be possible unless the person who found it knows my passcode?
Wifi just has to be on and connected to report its postition to you by going to icloud.com as explained in a previous reply.
I'm guessing that if the person wipes and restores the device, I will have no way of finding it... unless it works off the serial number?
If the iPod is restored, you can no longer find it via icloud.com. I uses turning FIndMyiPod on, not the SN,.
Thanks.

How to do Finder Search using Name Contains in 10.8.2

Similar Messages

Maybe you are looking for