How to do Freight Reconcilation

Hi,
How is freight reconcilliation done in SAP.Please provide me the guidance.
Thanks
Pratima

Hi,
Reconcilation is the process of comparing the data after it is transferred to the BW system with the source system. The procedure to do reconcilation is either you can check the data from the SE16 if the data is coming from a particular table only or if the datasource is any std datasource then the data is coming from the many tables in that scenario what I used to do ask the R/3 consultant to report on that particular selections and used to get the data in the excel sheet and then used to reconcile with the data in BW . If you are familiar with the reports of R/3 then you are good to go meaning you need not be dependant on the R/3 consultant ( its better to know which reports to run to check the data ).
Please check this link for data reconcilation:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
strategies and methods to reconcile sap bw data to source systems (cut and past the below link)
bluestonestep.com/component/option,com_docman/task,doc_download/gid,7
Hope it helps.
Regards,
Mona
Edited by: Mona Kapur on Jan 19, 2008 1:30 PM
Edited by: Mona Kapur on Jan 19, 2008 1:39 PM

Similar Messages

  • How to reverse the Reconcile Sub Contract Challan.

    Dear Expert,
    How to reverse the Reconcile sub Contract Chaaln. Our user has been made wrong GR and reconcile the Challan Number aganist same GR Number.After check the Report J1IFR then shown wrong entry.
    Please revert to me as soon as possible.

    Tried this step.
    The mat doc no has been removed from the list (as seen in J1IFR) But the qty is still the same. Even qty has to be reducedto reconcile the correct mat doc
    pl help

  • How to update freight vendor in MIGO

    Hi , I want you to give an idea of how to update freight vendor in freight tab of migo transaction either by bapi-extension or by enhancements or by using badi.... Currently Im Using BAPI_GOODSMVT_CREATE to generate GR....now the freight vendor field is  
    updating with PO-vendor directly......
    Thanks & Regards...
    Edited by: Abhijeet S Shinde on Feb 6, 2012 11:39 AM
    Edited by: Abhijeet S Shinde on Feb 6, 2012 11:41 AM

    I a facing the same issue.. I am creating MIGO using the same BAPI but I am not able to find any relevant field for freight vendor in MIGO Badi..

  • How to post Freight Charge in INbound INVOIC Idoc? (MM Invoice Verif)

    Hi Folks,
    Would like to post an inbound invoice(810) IDoc  that has multiple line items that may or may not have variances(quantity, price, etc.). MM Logistics Invoice verification is the process used for posting our invoices for raw materials. We would like for the line item variances to continue to post to the PPV account. Our problem is freight. Freight in this instance is in the header of the IDOC(segment E1EDK05). For example, we create a purchase order with 3 line items for $100.00 each totaling $300.00 for the purchase order. We receive an EDI Invoice for $345.00 which contains a $45.00 charge in the header for freight. We would like for the freight to be posted to the appropriate account. Currently the $45.00 difference in P/O total and Invoice total is being posted to the PPV account. Your helpis appreciated!
    What if Freight charge is populated as Line item in the inbound invoic idoc. Will the inbound program allow this kind of posting??
    Throw some light experts.
    Thanks,
    Matt
    Edited by: Creasy Matthew on Aug 16, 2009 6:25 PM
    Edited by: Creasy Matthew on Aug 16, 2009 6:25 PM

    Yes, you can include the freight cost in line item as well but that would not be advisable. Why don't you include Fright Cost in your pricing procedure ??? Do check the following link
    How to account freight in purchase order

  • How to include Freight charges and unloading charges in Material price.

    Hi All,
    Can you pls. advice how we can include freight charges & unloading charges in Material price (MAP) when receive in system.
    Current Situation :
    We buy Switchgears from vendor, which transported with special vehicle arrangement from different service provider and gets unloaded at warehouse by another service provider. Currently business create seperate PO for Material vendor, Freight Vendor and for unloading service provider. But MAP is only updated with Material cost only. How can I include delivery cost and unloading cost in MAP thro standard SAP process.
    Your solution will help business heaps.
    Regards,

    Hi,
    Create three condition types namely basic material price, freight charges & unloading charges.
    For  basic material price , you can copy PB00 and rename your basic material price condition type.Now freight charges & unloading charges condition type in M/06 , do not maintain condition category ( keep it blank ), so that it will added to inventory cost .For freight charges & unloading charges do not maintain account key & accrual key in Pricing procedure.
    Cretae PO , now you will see all cost added to NET price in PO and you can for doing GR where all cost are inventoried as materisl cost.
    Regards,
    Biju K

  • How to calculate freight,handling,insurance charges for PO

    Hi expert,
                  I need to show the details of PO with tax and freight,handling,insurance charges for purchase order. I calculated the tax amount of PO using CALCULATE_TAX_ITEM. but i don't know to calculate the freight and those charges. Guide me what table i have to be use or any other function module is there to calculate those charges. KONV is the table for conditions. how can i fetch those charges from these table using ebeln and ebelp fields.
    Regards,
    Rathish

    First you have to select Doc condition number (KNUMV) for each PO from EKKO table...then for the same KNUMV run KONV....here against each KNUMV-KPOSN (here KPOSN = EBELP)you will find the condition types & value...in the rport i think you have to hardcoat the condition types
    Regards,
    Indranil

  • How to add Freight Charges while creating PO

    At the time of creation of Purchase Order, the custom duty and the freight
    charges are not known.(Sometimes we know the freight charge)
    But when the supplier submit the invoice both these
    Custom duty and the freight charges are included, Now how do I go about
    matching the invoice. Do I need to go and modify the PO for the difference
    before I do the matching of PO with the invoice.
    Any suggestions would be appreciated

    Hi,
    I think you need to enable a DFF at PO header to provide the fright charges, this could be the one solution for your requirement.
    Regards,
    Kevin.

  • How to Add Freight to a stock transport order?

    We have 2 plants on opposite coasts.
    When we transfer goods from one plant to the other, we would like to add the cost of the freight to the inventory valuation in the new plant.
    How can we do this?

    > 1) U have to use Stock transport purchase orders.
    We are currently doing this.
    > 2) include the freight conditions in the stock transport pricing procedure .
    I see in SPRO --> Materials Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Delivery Type and Checking Rule, that we are using delivery type ZNL for PO Type UB.
    I also see in SPRO --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Pricing --> Define Pricing Procedures for Delivery, that delivery type ZNL has no pricing procedure assigned to it.
    Am I looking in the right place?
    > 3) assign the pricing procedure to the schemas...
    > 4) in the stock transport purchase order maintain the
    > freight values against the freight condition
    > 5) during goods receipt the freight cost is posted to
    > the inventory in the receiving plant.

  • How To Add Freight Amount in Invoice Before the Invoice is Posted Through SDK

    Dear All,
    I have a requirement in SAP B1 9.0 where the user want to add the freight amount in the freight window based on an udf value automatically .
    So if there is an possibility of adding the freight amount based on an udf calculated value though SDK before the Invoice get added in the Database.
    Please suggest if this is possible through SDK or any work around for this scenario in SAP.
    Thanks & Regards,
    Amit

    Hi Amit,
    Here is a way to do it via UIAPI:
    Setting a Freight by the UI API ?
    If you need to do it via DIAPI, have a look here:
    How to update amount in freight column(INV3) of A|RInvoice through SDK
    DI Copy AP(AP Invoice) from PO(Purchase Order)
    Populating Freight Charges on Sales Order
    Freight in A/R Invoice
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • How to add freight in sales order via DI ?

    Hi,
    Does anyone know how I can set the freight value when I try to create sales order via DI. I checked SDK help, there is fields like BaseAmountSC. But it is read-only in DI.  And I also found there is a table called RDR3, it says it is about freight in sales order but how I can access it in DI? Any suggestion?
    Thanks a lot !
    Lan

    Hi Gordon,
    Thanks for your reply. I think we have setup the code in SAP B1 because when I click the arrow button beside freight label in SAP B1, it will pop up a screen which I can type freight. But my question is how I can set the freight in DI? Which object in DI level refers to freight and how I can link this object to sales order document?
    Thanks,
    Lan

  • How to avoid Freight condition gettign copied from F2 to supplemetary OR

    Hello Expertes..
    I am having copy control between the F2 & the supplemetay sales order. ( debit memo request)
    In invoice I am putting freight condtion mannually which I do not want to get copied in the supplemetary order.
    I have changed the pricing type from D to H ( H- redetermine freight condition) but this is allowing condition to get copied.
    Kindly advice ASAP.

    hello JP
    thanks for prompt reply..well about 1 option) client does not want that
    option 2 option)  yes...we are able to delect the condition in supplement order but client does not want to this to be happen by the user.
    option 3) I will check with the client.
    Can we achieve this by changing H from D - item level in the copy control. could you plz expalin how does this H works?
    Thanks & Regards
    RaviRaj0308
    Edited by: RaviRaj0308 on Apr 26, 2011 2:39 PM

  • How to calculate freight in stock transfer order.

    Hi,
    While doing stock transfer order ,the freight value is coming zero.
    In VA01 we created stock transfer order.
    we checked price in conditions in stock transfer order.PR00 is not maintained,
    while saving the document its throwing error freight value is zero.
    Please tell me ,what is the procedure to calculate the freight value.

    Hi,
    It all depends on how you want the freight to be calculated (Eg: Volume based, Weight based etc.). Please share the business requirement.
    Regards

  • How to update freight charge via idoc DELVRY03

    Hi,
    We are using message type SHPCON for our inbound idoc, which will update the shipping info on the SAP delivery document.
    On the Idoc DELVRY03, i didnt find a place or segment where it will allow us to store/get the freight charge information from external system.
    Can someone help on this issue please.
    Thanks,
    -Naga

    Thank you Pankaj for your reply.
    I was hoping to know how the system handles this situation with standard idoc.
    Because i am new to the idoc world, i thought i am missing something.
    I will wait for some more responses, if i have no choice, then i will go with the enhancement.
    -Naga

  • How to prevent freight order note adoption

    Hi TM experts,
    A freight order is created with reference to another FO.
    We don't want to adopt the notes/texts from the referenced FO.
    How can we prevent adopting notes/texts from the FO that is referenced to?
    Thanks
    Erdal

    Thanks Narender,
    Let me ask my original question in this way:
    How can I determine the 'copy scope' as shown on the below algorithym?
    Thanks

  • How to avoid freight charge in sales order and not to invoice with frieght?

    Hi Experts.
    The customer group 5 indicates that the customer does not pay freight - ZLF5 condition, but still the freight is invoiced.
    Here i don want to invoice the customer with freight charge.
    Please advice me regarding this.
    Thanks
    Raghu

    Do the analysis of the pricing and check out if the condition record is maintianed for some other key combination(Access). I tihnk it must have maintained.
    If the frieght condition needs to be populated based on the customer ggroup. maintain that access/Combination on top so that it gets the highest priority
    Rregards
    Nithin

Maybe you are looking for