How to do inner join ,outer join, left join ,right join by using infoset

how to do inner join ,outer join, left join ,right join by using infoset

Hi
If you want to make join ,outer join, left join ,right join then its possible if you are using ODS or direct infoobject (In BW3.5) and if you are using BI7.0 then you also make join ,outer join, left join ,right join with Cube also.
For making join ,outer join, left join ,right join in infosets you just select your info provider then right click on your infoarea from context menu select info set after doing this one pop-up opens here u define your infoset technical name and give either ODS object name of infoobject name.
After doing this next screen opens in right hand side your selectes ODS or infoobject shows in graphical format .
and left hand side it shows one menu bar here you can select another ODS or infoobject for making join ,outer join, left join ,right join .just click on ODS button in menu bar and select ODS drag your selected ODS from Left to right after doing this your selected ODS shown in right hand side window in graphical format you just now after doing this you are able to make join ,outer join, left join ,right join for this first you select field from one ods and drag a line from 1 ods to second ods after doing this one arrow is created from one ods to another ods just right click on arrow and make join ,outer join, left join ,right join in to your ODS.
I think its clear how we can we make join ,outer join, left join ,right join in infoset.If you have any further query then welcome.
Assign Points...............
Thanks and regards
Ankit modi

Similar Messages

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
                              navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
function navL_Out(e:MouseEvent){
          navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
                              navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
          navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

How to achieve Vertical Text,start From left to right?

How to achieve Vertical Text,start From left to right?
Maybe it does not make sense for English,but it is Quite useful for Chinese

@喜狼_edny – hm. Possible, but the result is somehow unsatisfactory.
See for yourself.
We could start with some text right aligned in a table with just one single cell:
We could rotate the cell to 270° like that:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
And now we need the text direction from right to left and all characters rotated to 180°:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
myProperties = {
    composer : "$ID/HL Composer Optyca",
    characterDirection : CharacterDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    paragraphDirection : ParagraphDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    characterRotation : 180
myCell.texts[0].properties = myProperties;
Result:
Ugh! Not exactly the result we expected…
(Tested with InDesign CS5.5 on OSX 10.6.8)
It's the characterRotation that is not working as expected.
Uwe
Message was edited by: Laubender

How to migrate stored procs accessing columns "LEFT" and "RIGHT"

Hello!
I have to migrate a SYBASE11-Database to Oracle 8.1.7.
How can I migrate Stored Procs that access tables that contain columns 'LEFT' and 'RIGHT'?
OMWB reports a parse error "encountered: ,". If ommit the words 'left' or 'right' or if I write 'left()' or 'right()', it works. But I have to use these columns and we cannot change the database model.
It doesn't work with quoted column names like this: "LEFT" or "RIGHT".
I use OWMB 1.3.1.0.0. Anybody any ideas? Thanks in advance.
Yours, Heiko Kaschube

This is a simple matter to fix.
As the words LEFT and RIGHT are treated as reserved words by the stored procedure parser, they cannot be used successfully as column names within Oracle PL/SQL.
In order to get the stored procedure to parse, you can append an underscore to all references to LEFT and RIGHT e.g.
left_
then right click on the stored procedure name and select 'parse procedure' from the drop-down menu. The procedure will now parse and the generated PL/SQL can be viewed within the Oracle model menu tab.
It will now be necessary to remove all the underscores previously appended to the words 'left' and 'right' from the PL/SQL version of the stored procedure in question. Again, this can be done within the Migration Workbench.
Hope this helps.

How to find Inner join or (Left)outer join for Infoset

Dear Experts,
We have one Infoset which is based on the Master data and DSO. It is linked 0BPARTNER field From the Master Data and SOLD TO PARTY field from the DSO.
Here Could you please suggest me how can we able to find that whether this Infoset is based on Inner Join or (Left) outer join.
Thanks and Regards,
Suresh.

HI Suresh,
If the infoset is based on left outer join , you see the respective table shaded in a dirrerent colour and also displays
that it is a left outer join in the connection
refer the below link for the details on left outer join , you can make a join as left outer from the context menu of the
object required
http://help.sap.com/erp2005_ehp_04/helpdata/EN/21/af0942b9dc9c39e10000000a155106/frameset.htm
Regards,
Sathya

Inner join query used with 7 Database tables

HI All,
In a report they used the Inner join Query with 6 Data base table..now there is a performance issue with at query.
its taking so much of time to trigger that query. Please help how to avoid that performance issue for that.
In that 2 database tables containing lakhs of records..
According to my knowledge it can be avoided by using secondary indexs for those 2 database tables..
and by replacing the Inner join Query with FOR ALL ENTRIES statement.
i want how to use the logic by using FORALL ENTRIES statement for this..
So, please give you proper suggestion to avoid this issue..
Thanking you.
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 16, 2011 10:27 PM

Hi,
And what do you mean with "they used"? If "SAP used" then yo will need to ask a SAP for note
FOR ALL ENTRIES is quite good described in help. Please search forum also.
Without query it won't be possible to tell how it can be optimized, however you can try to use SE30/SAT and ST05. Maybe it will help you.
BR
Marcin Cholewczuk

How do I deal with audio, seperate left and right and make each stereo--CS5

I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks? Do I have to go to Soundbooth or is there a simple way in Premiere?

Bill G, tell me what I am missing and I'll use your method. I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
I record a lav on one channel, and a different wireless mic on the other. When captured, I have a clip that PR would normally treat as a single stereo track.
BEFORE putting any clips on the timeline, select all clips and set channel mapping. Set each channel to mono. Now PR treats these as two mono tracks. The output for each mono is the master track, which in my project is stereo. I can change "volume" for each track in the mixer, etc. but each channel is provided to the left and right master output.
I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

How to make track work in both left and right speaker?

i have an audio track with 2 speakers that each had a lav mic on them. one was recorded into left channel and the other the right channel. so of course when i play back each of their voices only come out of one speaker. pretty new to audition so how do i fix the track so that they each come out of both speakers? TIA

I have to say that, although not uncommon, for TV it depends quite a lot on how things are shot. In a standard interview situation where you might have a 2-shot to establish (with a definite left and right position) then a close up of the interviewee then a cutaway of the reporter and so on, panning can become very confusing and it tends to be better to just put everything in the centre.
Radio is easier because you don't have to be aware of what pictures are showing--but, even there care needs to be taken especially since, as Steve says, a lot of listening is on ear buds or headphones which accentuate any panning. Even in radio, though, choices have to be careful...for example, let's say the host starts with an interview where he's panned slightly right and the guest slightly left. So far, so good. However, then the next two stories are just studio reads...does the host stay panned slightly right for consistency or does he move to the centre possibly causing confusion?
I'm not saying never give positioning clues in a radio or TV mix, just that you always have to be aware of the bigger picture.

How to make mono recording play both left and right channels

I have an old mono recording that plays only on the left channel. How can I copy it to play on the right so I'll hear it on both channels? I put it on itunes and then tranferred it to Garageband in hope I could finally get it to play on both channels. I've tried everything in Garageband and nothing works. It seems simple to me, just duplicate the one channel to the other. Garageband says if you use the compressor it will play in both channels, but it won't. Any ideas? It's a recording from a band I was in back in 1966. We used state of the art reel to reel but it was mono! All these years I've tried to figure how to fix it. Thanks

I already recorded it from the tape to CD Spin Doctor through the line in and as I said it only comes out on the left channel. So then it's on itunes and I then transfer it to Garageband but it still is only on the left channel.I guess I could do this the old fashion way and get a mono plug to re-record to Spin doctor but in this day and age of sophisticated computer software I thought there may be an easier way. I guess I wasted my money thinking Garage band would help me edit this recording. Oh well, such is life!!!!

My screen goes black after about a minute fading out from left to right

my screen goes to black after about a minute fading out from left to right

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

How to Shift ToolBar(Search Box) From Left To Right

Hi All,
        I am trying to shift toolbar of Portal i.e Search Box from left to right.But it is not happening.How I do this?I do not want to upload PAR File also.
Please let me know.
Thanks,
Abhiram

Hi,
Follow this,
Import the PAR file into NWDS, the PAR you have downloaded is correct one, Now in the JSP folder, find ToolAreaView.JSP file, now find following lines of code in that JSP file
<DIV id="GroupElements" class="prtlToolAreaTaskCompAlign">
                    <TABLE border="0" cellspacing="0" cellpadding="0" >
                         <TR>
After this TR , add following code :
<td width="750">& nbsp;</td>
Thats it. With this your search field will be moved to right totally.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Apr 29, 2008 6:50 AM

How to make Vertical Text start furom left to right?

Sometimes some customers must be vertical text from left to right
This is mainly for Asian fonts
Whether it can be achieved with script,Or are there other methods？
Thank you~

@喜狼_edny – hm. Possible, but the result is somehow unsatisfactory.
See for yourself.
We could start with some text right aligned in a table with just one single cell:
We could rotate the cell to 270° like that:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
And now we need the text direction from right to left and all characters rotated to 180°:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
myProperties = {
    composer : "$ID/HL Composer Optyca",
    characterDirection : CharacterDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    paragraphDirection : ParagraphDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    characterRotation : 180
myCell.texts[0].properties = myProperties;
Result:
Ugh! Not exactly the result we expected…
(Tested with InDesign CS5.5 on OSX 10.6.8)
It's the characterRotation that is not working as expected.
Uwe
Message was edited by: Laubender

How to get inner or outer stroke for an unclosed line?

Hi,
I've been struggling to use stroke alignment for unclosed lines in Illustrator CC 2014. It is not possible as I can see, only centered is active.
First of all, is there any normal miracle way to do that?
Secondly, I've seen some scripts that can change Illustrators coordinate system(Instead using Top-Bottom coordinate system, it can allow to use Top-Right) So, maybe it is possible to change stroke alignment by coding? is there anyone who know something about that?
(My trouble is, I have 120 shapes drawn by me before not knowing the alignment restriction. Currently, I am in a deep trouble to use those icons with different stroke sizes because, icon's size is been changed)
thank you by now,
regards.

@rcraighead Monika Gause thank you for your help!

My iMac sound keeps resetting to come out of left or right speaker only. Why?

I have a new iMac 5k Retina. With this purchase I also started using some speakers through the headphone jack. I've noticed this annoying pattern that quite often the sound from the iMac keeps resetting to come out of the left speaker only or the right speaker. I keep having to reset it to balance them.
Is there a way to stop this?
Thanks.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

How to add two different background images - left and right

I want to get something like this

The way I have done that is to create the right image as a full width image and then place the left hand image over top and stretch the image to the left hand side of the page.
Use background images on boxes instead of page background. I have done something similiar in the header of this site:
http://www.signalpointdining.ca

How to do inner join ,outer join, left join ,right join by using infoset

Similar Messages

Maybe you are looking for