How to do install KDE 3?

Hello..
how to do to install kde 3?
when I go install kde (pacman -S kde) it is install kde 4...
exist some way?

evening
You need to install kdemod3 as the arch repos only have KDE4 in them.
Use this guide: http://kdemod.ath.cx/bbs/viewtopic.php?id=892
XazZ

Similar Messages

How to install kde?

hi!
How do i install kde. What other packages should i install?
thank you
benny

And if yuo want, that start KDE login manager after yuo turn on computer yuo need edit yuo "/etc/inittab" and it must look like this:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
id:5:initdefault:
#id:3:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
c1:2345:respawn:/sbin/agetty 38400 vc/1 linux
c2:2345:respawn:/sbin/agetty 38400 vc/2 linux
c3:2345:respawn:/sbin/agetty 38400 vc/3 linux
c4:2345:respawn:/sbin/agetty 38400 vc/4 linux
c5:2345:respawn:/sbin/agetty 38400 vc/5 linux
c6:2345:respawn:/sbin/agetty 38400 vc/6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
x:5:respawn:/opt/kde/bin/kdm -nodaemon
# End of file
Goodbee

[SOLVED] Cant figure out how to install kde 4.3rc from official "testi

Well, I'm very new to this and I have lots of questions about Arch and I've been reading lots of forum posts and wiki articles.
Now,I've installed everything in the beginners guide with exception of a DE. And that's because I want to install kde 4.3rc even if the development id not complete yet. I want to install it from official repositories and not from kdemod.
I see there is a kde-unstable repo that I have to enable. But I kind of read that to use it I have to enable testing also and "know how to use it" And well, thats the problem about being new to Arch isn't it? I don't know how to use it nor there is some wiki article called testing.
So I have 2 questions:
How can I "use" testing repo? Are there guidelines to use it or maybe recommendations? I'm thinking about enabling that repo only for kde 4.3 and not for other packages, so, How do I do that?
And also, If I install kde 4.3rc now, whene it is moved to extra in a couple of days/weeks, how should I disable kde testing repo and enable extra again to keep my kde up to date? Will I need to reinstall everything when this happens?
Lol... Those where like 10 questions instead of 2... But maybe the answer is very small. I hope someone can give me some advice.
Thanks
Last edited by ztrange (2009-08-02 22:08:49)

Hi, I can't answer all your questions but can help you get started.
The file you want is at /etc/pacman.conf so use your editor of choice and open that file. So say I use the vi editor it would be >>>
vi /etc/pacman.conf
If the package you want is in testing uncomment testing repo.
If its at a custom repo put in the custom package repository info at bottom of that file.
Then use pacman -S "package-name" to install what you want.
EDIT
Heres some links maybe some help to you, I don't use kde so don't know anything about it.
conversation about kde 4.3 rc and kde-unstable repository >>>
http://bbs.archlinux.org/viewtopic.php?id=75028
KDE Packages >>>
http://wiki.archlinux.org/index.php/KDE_Packages
Last edited by coda (2009-07-26 02:00:17)

[Solved] How to install KDE unstable

I've been meaning to try KDE4.5 to see if it is any more to my liking then the previous versions of KDE 4.
So how would I go about installing KDE 4.5 on my arch install?
Last edited by Mmarzex (2010-07-12 15:45:52)

Mmarzex wrote:
sand_man wrote:Make sure the [kde-unstable] repo entry in pacman.conf is above the [extra] entry.
Okay thanks that worked. I wasn't aware that the order in pacman.conf actually matter.
It does because the name of the app is the same (kde) it will pick it up from the first available repo that has the app/group named kde.
also, since your question has been answered, please mark the thread as [SOLVED]

How to install KDE and Gnome

Normally I'm a big KDE user, but there are some things in GNOME I want to try out to see if I might make the switch. I already have KDE installed, if I wanted the option to run KDE or GNOME can I just 'sudo pacman -S gnome gnome-extras' and it'll show up in the session type for kdm?

i run gnome BUT like a bunch of kde programs
so both are installed
kde dose have a tendency to reset the "open with" defaults
then there is an option in kdm to run gnome,kde, or other
so it is not a problem at all , you might need to re set the "open with" defaults but that is about it.

How to install kde in arch 0.7.2 (resolved)

hi everybody:
I install arch in my computer first time . but i can't start kde in arch. so ,i want anybody can help me. this is my install arch course .
1.pppoe-setup , pppoe-start OK
2.cp /etc /backup OK
3. vi /etc/pacman.conf
Server = http://mirror.vmmatrix.net/ArchLinux/current/os/i686
Server = http://mirror.vmmatrxi.net/ArchLinux/extra/os/i686
4.pacman -S pacman
5.pacman -Syu
6.pacman -S xorg hwd xterm
7.lspci
00:00.0 host bridge : intel corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
00: 02.0 VGA compatible controller : Intel Corporation 82845G/GL [Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller : Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller : Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller : Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller : Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USBL
EHCI Controller (rev 01)
00:1e.0 PCI bridge : Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA Bridge : Intel Corporation 82801 DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE Interface : Intel Corporation 82801 DB (ICH4) IDE Controller (rev 01)
00:1f.3 SMBus : Intel Corporation 82801 DB /DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multi Media audio controller : Intel Corporation 82801 DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) ac'97 Audio Controller (rev 01)
01:02.2 Ethernet controller: VIA Technologies Inc.VT6105 [Rhine-3] (rev 86)
so ,i install the xf86-video-i810 driver
pacman -S xf86-video-i810
8.hwd -x
9.mv /etc/X11/xorg.conf.hwd /etc/X11/xorg.conf
10.startx
11.xdpyinfo |grep resolution
12.pacman -S xorg-fonts-75dpi
in this time ,the X is okay. so ,i startx , i come in the x. but ,when i left the x, i saw some error ;
(EE) Failed to load module "glx" (module does not exit, 0)
/etc/X11/xinit/xinitrc :line28 twm:command not found
/etc/X11/xinit/xinitrc :line28 xclock:command not found
warning : locale not supported by c library ,locale unchange
warning : locale not supported by c library ,locale unchange
warning : locale not supported by c library ,locale unchange
xterm:fatal IO error 32 (Broken pipe) or kill client on X server ":0.0"
login:fatal IO error 32 (Broken pipe) or kill client on X server ":0.0"
xterm:fatal IO error 32 (Broken pipe) or kill client on X server ":0.0"
xinit:connection to X server lost
waiting for X server to shutdown FreeFontPath: FPE "/usr/share/fonts/mic:unscaled" refount is 2 ,should be 1 ;fixing
i don't know what is the "glx" . and while "connection to x server lost"
then ,i still to install kde ,i input "pacman -S kdebase" ,but when the install is complete, i can't start the kde .i can't find startkde .some friends told me to install kdm ,but i input "pacman -S kdm ", can't find this file .
i hope somebody to help me . my english is very poor ,you don't laugh.

When uve got the kde-i18n-* package installed u can select ur language settings in the Control Center from KDE.
Also check if uve got ur locales set, take a look here http://wiki.archlinux.org/index.php/Configuring_locales It's just uncommenting and running locale-gen
Scim i dont myself what this is exactly, never needed myself but heres a wiki entry anyway that might come in handy imo http://wiki.archlinux.org/index.php/Sma … d_platform
cheers,
detto

How to install KDE without an internet connection

I have a fast internet connection at the office, but not at home.
1. What files do I need to copy so that I can burn a KDE CD?
2. What is the procedure to install KDE from my own CD?
Thank you.
wickyd

Those commands don't need an internet connection.
Do this:
1) download ftp://ftp.archlinux.org/current/os/i686 … .db.tar.gz and ftp://ftp.archlinux.org/extra/os/i686/extra.db.tar.gz when you have internet
2) on your home pc (as root): cd /var/lib/pacman ; cd current ; rm -rf * ; tar xzf /path/to/current.db.tar.gz ; cd ../extra ; rm -rf * ; tar xzf /path/to/extra.db.tar.gz
3) pacman -Sp --noconfim kde > pkglist
4) take that file where you have internet and run wget -nv -i .../pkglist in an empty directory
5) when the download has finished take those files to your home pc, put them in /var/cache/pacman/pkg and run pacman -S kde
Last edited by byte (2007-02-28 22:40:05)

How do I install the nvidia 173 driver?

Hi
Today I installed Arch. Felt like the greatest achievement. Got xorg, and a few other things working, lxde until I download kde... and how to I install the nvidia 173 driver from the aur for my nvidia geforce fx 5700 (leastwise winfast a360) on arch?
many thanks.
PS sorry if this is scruffy, I'm on my phone which is small

Welsh_Miner48 wrote:https://aur.archlinux.org/packages/nvidia-173xx/ is it I think
Sure it is.
Did you read https://wiki.archlinux.org/index.php/Nvidia ? It's mentioned at the very beginning.

How would i install kdm?

To login into kde i do startx , how would i install kdm?

The wiki has instructions for adding a display manager:
http://wiki.archlinux.org/index.php/Add … on_startup

How do I make KDE use smartdimmer instead of ... ?

Hi!
I have KDE 4.3 installed on my laptop and the power management options don't work when it comes to dimming my screen. I have just installed smartdimmer, which does work for my screen and I'm wondering how I can tell KDE to use that instead.
Thanks
Last edited by steven (2009-10-24 02:10:50)

There are two different settings involved:
'''Address Bar Autofill'''
If you have used HTTPS on a site before, Firefox's address bar autofill feature will prefer the HTTPS address. If you don't mind selecting from the drop-down instead, or simply typing the whole address, you can turn off the address bar autofill. Here's how:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''autofill''' and pause while the list is filtered
(3) Double-click '''browser.urlbar.autoFill''' to toggle it from true to false.
'''Address Bar Search'''
Regarding address bar search, you can change the URL used by the "keyword" service. Please see this thread for links: [https://support.mozilla.org/en-US/questions/955363 Unable to connect to proxy due to automatic https].
Does that solve it?

Can't install KDE or GNOME from pacman

When I try to install KDE or GNOME from pacman, the system downloads most or all of the files, from what I can see, and then returns a bunch of errors of the form "gcc-libs: /usr/lib/libssp.so exists in filesystem". I'd post the entirety of the messages, but I can't figure out how to pipe output from pacman without making it impossible to enter "yes" at the install prompt. This problem occurs with both kde and gnome, and from what I can tell it looks like basically the same set of errors with either one.

What does "pacman -Qo /usr/lib/libssp.so" say? It should say gcc-libs and not gcc. I'm guessing you have just installed. Have you done a "pacman -Syu"? The gcc package was split into gcc and gcc-libs.
In fact it looks remarkably similar to this" http://bbs.archlinux.org/viewtopic.php?id=37690

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How do I install Snow Leopard while keeping files, applications, and settings

I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
Install Snow Leopard while keeping files, applications, and settings
If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files. You may have to reinstall some applications, however.
Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c .
The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install.
When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer.
Update your system software to ensure that you have the most recent operating system components. From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
(105428)

How do I install CC Desktop and Apps to a drive other than "C"?

After several problems, help from the forum, and finally an Adobe tech from India, the tech was able to install CC Desktop. The tech had to make hidden files visible, and change an existing file OO?? (I can't remember the last two letters") to OO??_old. Maybe this will help someone else.
Perhaps I'm wrong, but as the tech was downloading and installing CC Desktop, I didn't see any option for which drive to install it on. I am now installing CC apps. I see no option as to which drive to install the app.
I have my computer setup as C: operating system; D: sctratch; E: programs; F: files, G: cd/dvd.
How can I install CC Desktop to "E"? If done, will CC apps automatically install on "E"? Will CC Desktop work properly on other than "C" drive? Will CC apps work properly on other than "C" drive? If CC Desktop should always be on "C", can I stll install CC apps on "E"? I get no dialog box or window providing an option of where to install any of the CC programs.

While CCApp Prefs does give you this option, it doesn't respect the settings and still installs to C: Drive. This is a big problem for those using an SSD drive to boot. Why would something as simple as choosing your install folder, like every other application in the world be an issue that has taken over a year to fix?

How do I install a language XPI globally and make it the default language?

I am using Firefox on unices and various Linux distributions (the less common ones). Installing Firefox is easy, but it is always in English. I get most of my interfaces (gnome, libreoffice, gimp, etc) in my preferred translation simply by setting the proper locale (export LANG=xy_XY.UTF-8) before starting Xorg. I found and downloaded my preferred language pack for firefox, which comes in an XPI archive. Opening that XPI file in Firefox (via an URL of file:///path/to/file/langpack.xpi) works smoothly, the translation gets installed under the user's own profile and it shows up in the add-ons (under the new category: Languages). Unfortunately, I still see no way in Firefox preferences to set this added translation as the default. Firefox still starts with the English interface. On SeaMonkey, there is a combobox on the Appearance panel that allows me to select the language of the interface from the list of installed/available languages. I cannot find such option on the panels of Firefox. So far, I had to install a language-changer add-on to be able to set the interface to my native locale. Even though my users never need to switch to any other locales.
Q1., Once a language xpi is installed, how do I set the interface to use that language?
Q2., How do I install the language xpi and make it the system-wide default, so that all my users see Firefox starting with the native (non-English) interface?
I found a handful of description for Q2, but they appear to be outdated and do not work. These include the -install-global-extension argument to Firefox, placing the xpi file as it was downloaded into the "extensions" folder, placing the xpi file renamed to the extension ID into the "extensions" folder, unzipping the contents of the xpi into a subfolder of the "extensions" folder named as the extension ID. Please note, these attempts might have failed because I placed the extension NOT where it was supposed to go. The instructions refer to the global extension folder as <installation folder>/extensions, but on my system no such folder exists. Firefox seems to get installed into /usr/local/lib/firefox and there is no "extensions" subfolder there in. However, there is a "browser/extensions" subfolder, but placing my XPI there did not trigger any effect. Also, I manually created the "extensions" subfolder in /usr/local/lib/firefox and moved the xpi there (on various names, unzipped and in a whole) without the expected result.
Any suggestion is very much appreciated!
My goal is to install the firefox package, then run something from the command line resulting the non-English translation in the downloaded XPI becoming the system-wide default for all users. A step forward would be to know for certain where that "extensions" folder must be on my specific OS. How do I query that?

Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

How to do install KDE 3?

Similar Messages

Maybe you are looking for