How to do interscope agent installation adn configuration

Hi
What are all the JAVA parameters that need to be configured after interscope agent installation
Rohit

Have you set the Flight recorder parameter?. - This is for Diagnostics installation.
Please refer to the IMG Documentation available in the display section Managed sytems setup->Manual Configuration->Activate Flight Recorder.
If its Regarding the Parameters for Interoscope configurations:
The JAVA VM parameter will be changed automatically on configuration of Wily Agent-(Automatic Configuration through Diagnostics) or we have to set up manually in case of manual Configuration-> please refer to Installation Guide - Introscope Version 8Installation Guide For SAP - from page 24.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Sep 15, 2009 7:49 AM

Similar Messages

How to access Interscope agent

Hello All,
How can we access the interscope agent and where are its logs written
Rohit

Hi Rohit,
The Access is through Wily Introscope Webview/Workcenter. You can access the data reported by Introscope agents, Both host agents and Bytecode agents-> in the Investigator mode.
These agents report the data to the EM and ideally thats where you can check for the logs for any data.
you can find the application for wily in Managed system under the following path : sapmnt/<SID>/<Instace>/j2ee/cluster/server<no>/apps/sap.com/tcsmd application~wily4java XXX.
hope this helps.
Kindly revert if you face any issues.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Sep 11, 2009 4:03 PM

10g grid agent installation and configuration on oracle RAC

Hi All,
I have one two node RAC setup on HP-UX itanium platform and I want to install oracle 10g grid agent on both the RAC nodes to monitor the RAC instances and databases and OMS repository server is ready and running. Only I have installed agents on both the nodes, but tns entry and hosts files on OMS server and both the nodes modified.
But, nodes are not getting automatically discovered by OMS server. And what is the command to configure the grid agent on RAC instances.
I have to install grid agent on both the nodes individually or it can be installed on single node and can be integrated with other node.
Please help me out in this regard.......
Thanks in Advance,
Sukanta Paul.
Edited by: sukanta paul on Aug 18, 2009 10:16 PM

Similar problem and installation does not detect the rac nodes and installation is done locally which does not help the situation..By the way we all consult documentation and the whole point of having a forum is so we have a potential fix or work around and not link from here to documentation. Just to mention :)

Error in Agent Installation - oracle Configuration Manager

Hi All,
I m trying to install Agent using this file "Linux_Grid_Control_agent_download_10_2_0_2_0". In between the installation "i got one screen - "oracle configuration manager proxy setting" even it is optional and i have not checked it .... it is not going next. i dont want to configure it (but when i give values proxy ip and port, not accept it). When I click the next button getting the message "The connection to oracle Configuration Manager can not be established, please check your network connection and proxy settings and try again"
Please help with this
Thanks
Shiju

Hi Shiju,
Is there any specific reason for using 10.2.0.2 agent. The latest Grid Control agent release is 10.2.0.5. I would suggest you to install the same. Also you can configure the OCM at a later point of time.
Hope it helps
--Lai

Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error

Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type       : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
        Version: 1201000100
        Revision: 0
        OS Platform: Generic Platform
        Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.

   Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

How to deployment for AV agent installation on RAC enviroment?

before the AV agent installation on RAC , the agentname and agentuser should be added to av server first. only one agentname/agentuser for the two nodes, or one agentname/agentuser for each node ? also ,the agentusr and the avsrcusr account only one account for two node ?
1. how to tell the agentname and agentuser account before agent installation ? more details are better.
2.with the 9i RAC DB at AIX, need install CRS first?
3. I setup an Linux cluster enviroment ,and a windows cluseter envirement(no CRS installed). but when install the agent , if the agentname set to hostname of the virtual IP ,the error is : ERR0R1: The av server is expecting the agent with given name to be installed in another machine. if input the agentname (which agenthost is node1) , it contiued,but no "node select GUI" comes up (according to the the GUI of Morgan's Library at: http://www.psoug.org/reference/audit_vault.html
),it executes a single agent installation on node1.
I don't know it's wrong configuration of my linux or windows cluster enviroment , or there are some import steps missed ?
it's urgent ,thanks!!
--the node's hostname and IP :
#public
192.168.0.11 node1
192.168.0.12 node2
#private
192.168.8.11 node1-private
192.168.8.12 node2-private
#vip
192.168.0.99 node
agentname: agentwin with agenthost node
agentname : agentwin01 with agentost node1
Message was edited by:
user634185

It is not urgent ... no one is drowning, your house is not on fire, so please don't abuse this forum. Thank you.
Audit Vault is auditing one database ... multiple instances. First create the RAC cluster the way you normally would. Then go to any single cluster node and install the agent. The agent installation will recognize that it is a cluster and ask you whether you want to install on one or all nodes and let you choose which ones.
There is no need to perform separate installations on each node.

SEEBURGER EDI &AS/2 adapter installation and configuration guides

hi ,
can any one provide me SEEBURGER EDI &AS/2 adapter installation and configuration guides or links please?
thank you,
babu

Hi,
You can get the original manuals from Seeburger if you are installing the Seeburger on server.
Please see the below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards
Chilla

FAM 8.0, Tomcat J2EE agent installation problem

Hello:
I was able to install FAM 8.0 in Tomcat 6.0.14 on Ubuntu (7.04) Linux. Everything seems fine. In the end, the applications I want to use with OpenSSO also make use of Tomcat 6.0.14. I noticed on the opensso users email list that the Tomcat 3.0 agent won't be available until early next year; but that the 2.2 agents should work with FAM 8.0. So, I got the the J2EE agent for Tomcat - SJS_Tomcat_Server_55_agent_2.2-01.tar.gz. The documentation makes no references to Tomcat 6, and I'm hoping this is due to the fact that Tomcat 6 was not available when the documentation was written.
Does this agent work with Tomcat 6? I have this problem when installing the agent (agentadmin --install):
$CATALINA_HOME environment variable is the root of the tomcat
installation.
[ ? : Help, < : Back, ! : Exit ]
Enter the $CATALINA_HOME environment variable: /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14
Invalid directory specified for the $CATALINA_HOME environment variable
Invalid CATALINA_HOME directory :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14I can see in debug/agentadmin.log the following:
[05/24/2008 13:06:37:684 PDT] FileSystemValidator : Is directory : /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14 valid ? true
[05/24/2008 13:06:37:686 PDT] HomeDirValidator : Is $CATALINA_HOME directory /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14 valid ? false
[05/24/2008 13:06:37:686 PDT] Invalid CATALINA_HOME directory : /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14This directory does indeed exist, and is accessible by the user I'm logged in as. It appears FileSystemValidator agrees with me, but HomeDirValidator has a problem. I tried this on both Ubuntu 6.04 and Mac OS X 10.5.2. Does this indicate that Tomcat 6 is not supported? Or is it indicative that neither OS on which I've tried to install the agent is officially supported?
Thanks!
Jeff

Hi Denis:
Before being redirected to another short term task, I did indeed get the Tomcat 6 agent to work. I probably won't be able to look at OpenSSO again seriously for another couple of months. :(
I have the OpenSSO server running on Tomcat 6.0.14 on Ubuntu 6.x Linux running in a virtual machine on my Mac. I was not able to get the server to run directly on the Mac, and I cannot remember the reason at this time.
But, as far as the agent goes, I run it again using Tomcat 6.0.14 on my Mac (Mac OS X 10.5.2), using the 1.5 JRE. I do have the agentapp war deployed as well as the agentsample web application to play with. In my catalina.out file:
Jun 18, 2008 10:07:20 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
Jun 18, 2008 10:07:20 AM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive agentapp.war
Jun 18, 2008 10:07:21 AM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive agentsample.war
Jun 18, 2008 10:07:22 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8090
Jun 18, 2008 10:07:22 AM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8011
Jun 18, 2008 10:07:22 AM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/16 config=nullI have no error messages is any Tomcat log file.
I checked out the source code for the Tomcat v6 agent (2.2) on May 27, so I don't know how that compares to yours or what's been checked into CVS since my build. I also don't know what the OpenSSO NamingService is.
I assume you used fully qualified domain names to specify the web application to be protected by agent as well as the OpenSSO server itself. The following is the output of the conversation when I run the agent installer script on my system. It has been redacted a bit (domain name and encryption key) to protect my client, but otherwise this is what I supplied to the installer:
Enter the complete path to the directory which is used by Tomcat Server to
store its configuration Files. This directory uniquely identifies the
Tomcat Server instance that is secured by this Agent.
[ ? : Help, ! : Exit ]
Enter the Tomcat Server Config Directory Path
[/opt/apache-tomcat-6.0.14/conf]: /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf
Enter the fully qualified host name of the server where Access Manager
Services are installed.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services Host: login.opensso.example.com
Enter the port number of the Server that runs Access Manager Services.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services port [80]: 8080
Enter http/https to specify the protocol used by the Server that runs Access
Manager services.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services Protocol [http]:
Enter the Deployment URI for Access Manager Services.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services Deployment URI [/amserver]: /opensso
Enter the fully qualified host name on which the Application Server
protected by the agent is installed.
[ ? : Help, < : Back, ! : Exit ]
Enter the Agent Host name: analysis.opensso.example.com
$CATALINA_HOME environment variable is the root of the tomcat
installation.
[ ? : Help, < : Back, ! : Exit ]
Enter the $CATALINA_HOME environment variable: /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14
Choose yes to deploy the policy agent in the global web.xml file.
[ ? : Help, < : Back, ! : Exit ]
Install agent filter in global web.xml ? [true]:
Enter the preferred port number on which the application server provides its
services.
[ ? : Help, < : Back, ! : Exit ]
Enter the port number for Application Server instance [80]: 8090
Select http or https to specify the protocol used by the Application server
instance that will be protected by Access Manager Policy Agent.
[ ? : Help, < : Back, ! : Exit ]
Enter the Preferred Protocol for Application Server instance [http]:
Enter the deployment URI for the Agent Application. This Application is used
by the agent for internal housekeeping.
[ ? : Help, < : Back, ! : Exit ]
Enter the Deployment URI for the Agent Application [/agentapp]:
Enter a valid Encryption Key.
[ ? : Help, < : Back, ! : Exit ]
Enter the Encryption Key [XXmyencryptionkeyXX]:
Enter a valid Agent profile name. Before proceeding with the agent
installation, please ensure that a valid Agent profile exists in Access
Manager.
[ ? : Help, < : Back, ! : Exit ]
Enter the Agent Profile name: testagent1
Enter the path to a file that contains the password to be used for identifying
the Agent.
[ ? : Help, < : Back, ! : Exit ]
Enter the path to the password file: /Users/jas/Development/opensso/tryout/agent_password
SUMMARY OF YOUR RESPONSES
Tomcat Server Config Directory :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf
Access Manager Services Host : login.opensso.example.com
Access Manager Services Port : 8080
Access Manager Services Protocol : http
Access Manager Services Deployment URI : /opensso
Agent Host name : analysis.opensso.example.com
$CATALINA_HOME environment variable :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14
Tomcat global web.xml filter install : true
Application Server Instance Port number : 8090
Protocol for Application Server instance : http
Deployment URI for the Agent Application : /agentapp
Encryption Key : XXmyencryptionkeyXX
Agent Profile name : testagent1
Agent Profile Password file name :
/Users/jas/Development/opensso/tryout/agent_password
Verify your settings above and decide from the choices below.
1. Continue with Installation
2. Back to the last interaction
3. Start Over
4. Exit
Please make your selection [1]: 1
Updating the
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/bin/setclasspath.sh
script with the Agent classpath ...DONE.
Creating directory layout and configuring Agent file for Agent_001
instance ...DONE.
Reading data from file
/Users/jas/Development/opensso/tryout/agent_password and encrypting
it ...DONE.
Generating audit log file name ...DONE.
Creating tag swapped AMAgent.properties file for instance Agent_001 ...DONE.
Creating a backup for file
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/server.xml
...DONE.
Creating a backup for file
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/web.xml
...DONE.
Adding SJS Tomcat Agent Realm to Server XML file :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/server.xml
...DONE.
Adding filter to Global deployment descriptor file :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/web.xml
...DONE.
Adding SJS Tomcat Agent Filter and Form login authentication to selected Web
applications ...DONE.
SUMMARY OF AGENT INSTALLATION
Agent instance name: Agent_001
Agent Configuration file location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/Agent_001/config/AMAgent.properties
Agent Audit directory location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/Agent_001/logs/audit
Agent Debug directory location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/Agent_001/logs/debug
Install log file location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/logs/audit/install.log
Thank you for using Access Manager Policy Agent
[jaslap:tryout/tomcat_v6_agent/bin] jas% Can you post the exception details you're getting. That might help someone diagnose the problem.
Take it easy,
Jeff

CCMS agent installation

Hi Experts,
I am doing SAP CCMS agent installation to monitor a non-SAP system which will be monitored by a Central monitoring system.
I have followed all the steps as:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/adf7409b9d8531e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/frameset.htm
1. communication user CSMREG in Central monitoring system.
Created the CSMCONF start file for CCMS agents in monitoring system.
2. CCMAGENT.SAR , SAPOSCOL.SAR , INSTALL_WIN.SAR
And done the configurations required in the monitored system.
3. Register the CCMS agent with CEN and start the agent. By following this step:
<hostname>\saploc\prfclog\sapccmsr.exe -R*
while registering the CCMS agent ,
I ma getting this...
This CCMS agent program sapccmsr is able to actively report alert data into the monitoring system[CEN], which is the central monitoring system.
to enable this feature, you have to setup the user CSMREG in [CEN].
After entering the RFC logon info for the user,
client:001
user:CSMREG
language:EN
host name:
load balancing:n
system number:01
router sting :optionla
trace lavel:0
password for CSMREG user:********
Its showing this error:
ERROR: RFC error during logon: 105 DESTINATION_NOT_EXIST
How to solve this?
Do I have to do any RFC configuration in the Central monitoring system(as I want to monitor a non-SAP system)?
urgently required.
Any help will be appreaciated.
Regards
Manisha

Hi Manisha,
Yes you will have to create a RFC and a suitable RFC user in the Central Monitoring System (CEN) via txn RZ21 to monitor these remote systems.
Please follow this link:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/adf7409b9d8531e10000000a1550b0/frameset.htm
Please award suitably if helpful.
Regards, Dibya

Weblogic 81. portal server doesnot startup after the AM Agent installation

Hi,
I have a problem starting the weblogic server after I create the agent Authentication provider.
I have cross checked the CLASSPATH values and the JAVA_OPTIONS values.. it is correct
I get the following error
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authenticati:
[java.lang.ClassNotFoundException: Can't load class: com.sun.identity.agents.weblogic.AmAuthProvider]
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:205)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:262)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateIm)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManager)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelega)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManage)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
Reason: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Auth:
[java.lang.ClassNotFoundException: Can't load class: com.sun.identity.agents.weblogic.AmAuthProvider]
Please help!!!
-Karun

Have you specify relative path or full of weblogic startup script? How's permission for user invoking startup script?
Excerpt from the docs as below:
Startup Script Location: Enter the full path to the startup script that is used to start your BEA WebLogic Server instance.
Have you installed the agent on the admin server instead of the managed server? It should be managed server.
Is this WebLogic clustered environment ? If it is a clustered setup; then you need to follow some specific steps to configure the managed servers. You are better off installing the agent on a managed server and copy the agent changes (CLASSPATH and JAVA_OPTIONS) to all the server instances. Some folks also prefer to copy these changes in commEnv.sh (easy way out) but we do not recommend this route since the server related JAVA_OPTIONS can be specific to each BEA server instance. Please note that the agent installer does not understand the template of admin server script. So, for a clustered environment :
1. Remove the present agent, restore the admin server script.
2. Install the agent on a managed server.
3. If there are more than one managed servers, put the agent startup script related changes manually in each of the managed servers.
4. Also note that you can start managed servers from console or command line. Depending on where you start managed servers, you will have to copy the agent changes to the respective files.
If it is not a clustered environment; follow 1 and 2 only. Could try it out and let us know what are your findings? Jerry

How to install diagnostic agent for nw 7.0sp17, with solman ehp1- sp25

Hi Gurus,
we are using NW 7.0 Enterprise portal at SP17, want to configure E2E. So installed solution manager 7.0 EHP1 SPS 25.
Ran the Guided procedure solman_setup successfully. with intitial config, basic config and pending at managed system config.
Here my question is:
do i need to install smd agent on solman? or solman itself comes with agent. i cannot see any agent in mmc on solution manager.
What is SOLMANDIAG and SOLMAN AGENT, SMD Agent and Host agent.
The guide (https://websmp207.sap-ag.de/~sapidb/011000358700000952852009E) says before install SMD agent, install host agent, diagnostics agents are available 7.11 on wards, while installing smd agent sapinst asking SAP Unicode Kernel 711 , but currently my NW Portal system is using kernel 7.0..
Any guide, how to proceed for E2E on nw7.0 SP17 with solman ehp1 sp25( highest availale spack)
Thanks in advance.
Regards
Balaji

Hi Balaji,
As per the SMD agent 7.11 installation guide (https://service.sap.com/~sapidb/011000358700000952852009E) , Page 6 and 8, you would need to download the standard NW 7.11 DVDSs( usually kernel and Installation master) and SMD agent installation packages from the SMP. Location is mentioned in the guide as well.
For your query that Portal is based in i386, these are two different things. The SMD Agent will be installed with its own kernel and also 7.11 kernel is not support edon 32bit. However the SMD agent will use its own 7.11 64bit kernel and Portal will use its i386 kernel. Hopefully your hardware is able to support both. I recommend to proceed with x86_64 7.11 kernel for your SMD installation. Incase the hardwar does not support this, go for alower release of SMD Agent wherein the kernel supports 32 bit hardware.
Best Regards,
Srikishan

Manually coping agent installation directory in windows.

Hi
One of my production server's hardware is going to be upgraded from ProLiant DL380 G4 to ProLiant DL380 G5 with higher configuration in Windows 32 bit OS. My network team is rebuilding this server as a new box with the same ip address. I don't want to loose the history of this node target databases in the Grid repository for reporting purposes.
If I install the oracle agent as a fresh installation I will loose the history. I am planning copy the entire agent installation directory to new server. I am curious to know once I secure the agent and start the agent with because ip addresses are same will it start? How to create a agent service here? Is there any manual process to create the agent service. I want to preserve the history of the node and targets in the Grid here.
Your valuable suggestions are highly appreciated.
Rao

Rao,
You won't be able to just copy the software directory to the new server. The installation process addes entries to the registry, updates the path, etc.
The sc command allows you to interact with services. If you type "sc" at a command prompt, you will get a listing of the syntax.
I wouldn't think that you could copy the configuration from an "old" host & use it on a "new" host. There would be too many differences that would cause conflicts. I guess you could try it & drop & recreate the objects from the repository if it didn't work.
Thanks,
Brian

A problem for grid control agent installation.

Hi, All:
I am installing EM grid control agent installation in wanted server...
after agent installation and excuting root.sh, OUI start to run automatically Agent Configuration Assistant... then got an error, the reason for error from the log is :
Requesting an Oracle Wallet and Agent Key from the OMS... Failed.
Invalid Agent Registration Password.
The Agent has not been secured.
that means I put wrong agent registration password,
so how can I fix this in the mid way?
thanks a lot in advance.

I tried
emctl secure agent
when prompt for password:
(just type enter, leave it empty)
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Stopping agent...
seems like that process is never ending....
then I typed CTL+C
..............................Failed to stop agent.

Agent Installation and Behavior of VMs

I have just recently installed SCVMM Agents on my Hyper-V Clusters. I have noticed following things which I would like to know more about and whether there is a workaround to that:
1. When I look at the state of the virtual machines part of the cluster in Failover Cluster Manager, they appear to be normal and working, but when I look into the SCVMM Console, sometimes it shows as stopped and sometimes shows as Host Not Responding
and sometimes depicts the correct state. What could be causing that? SCVMM and Hyper-V Hosts are all on the same network. Is there a way to fix this?
2. Some of the machines that I was live migrating easily through Failover Cluster Manager are providing strange options when I am migrating them through SCVMM Console such as when I was moving one of the nodes that is using a shared VHDx
and is part of the Guest Cluster, the wizard provided me with an option to store the VHDX on any of the CSVs available. Why is it asking me so? Is it moving the Storage of the VM along with the Configuration as well? I get the same option when
I live migrate a machine that is part of a Guest Cluster that is using Fiber Adapter and has direct connectivity to the SAN. Also, machines were highly available when in Failover Cluster Manager, but here both of these Guest Clusters are appearing
as not Highly Available. Why is it so? How to rectify it.
3. After the Agent Installation what are the basic configuration settings that must be done. Any article/blog would be appreciated.
I would love to know about these items. Thanks in advance.

I don't know if I can answer everything.
SCVMM has the assumption that when a machine is HA, it is stored on Shared Storage. That equals CSV or SMB3 share (I believe). And that means all of the components of the VM. So SCVMM has to properly identify your shared storage.
Kristian has a little here:
http://kristiannese.blogspot.com/2011/12/make-vm-highly-available-vmm-2012.html
I am hoping he wanders along as he might be able to give deeper details.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

EIS Installation and Configuration

Hi Everybody,
I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
But I have no idea how to configure(Creating DSN Catalog) in EIS.
I am using Oracle 10g. Can any one please help me on thsi installation.
Already I gone through the installation document but I didn't understand how to configure.
If anyone having installation and Configuring Screen shots please send me to my mail
Mail Id: [email protected]
This is very urgent I need to give presentation on the EIS
Thanks in Advance for your help
Awaiting for your quick Response

I'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.

How to do interscope agent installation adn configuration

Similar Messages

Maybe you are looking for