How to do jaas with out using call back handler classes
hi
i successfully executed jaas under weblogic 6.1 now i wanted
to implement it in our project, for that i wanted to use
some GUI screens to ask for user name/password and to show error messages
so my questions are
1)where i have to call GUI screens in Login module or some where else
2)if in i am calling in client then i have to pass user name and password to
login module.
how can i pass this to loginmodule..?
3)or what i am thinking is not the properway..?
thanx in advance
Hi Nivas,
You can pass the security credentials via a URL, please refer to http://e-docs.bea.com/wls/docs61/security/prog.html#1043462.
Regards,
Richard Wallace
Senior Developer Relations Engineer
BEA Support.
"nivas" <[email protected]> wrote:
>
hi
i successfully executed jaas under weblogic 6.1 now i wanted
to implement it in our project, for that i wanted to use
some GUI screens to ask for user name/password and to show error messages
so my questions are
1)where i have to call GUI screens in Login module or some where else
2)if in i am calling in client then i have to pass user name and password
to
login module.
how can i pass this to loginmodule..?
3)or what i am thinking is not the properway..?
thanx in advance
Similar Messages
-
How Achieve timedseries calculations with out using AGO And ToDate function
Hi,,
1)
How Achieve timedseries calculations with out using AGO And ToDate functionion
this question asking in interview ..is it possible..?
if yes please response as soon as possible..
2) i have 2 cloumns Product and value...
client requirement is they need ranks based on Value ..in dashboard .using dashboard prompt..edit box...if user enter any number (ex :5 ) report should show top 5 ranks if he enter 20 should be top 20 ranks..
how to achive this ?
thanks,
rajConsider yor first question:
1. Yes, we can create timeseries measures without using AGO and TODATE
1. Create ALIAS of fact tabe in the physical layer
2. Join the Time id from the ALIAS fact table with the YAGO_MONTH_ID column from your time dimension table (For calculating Year Ago variants) similarly join with MAGO_MONTH_ID column for Month Ago measures.
3.Pull the ALIAS tables as an additional Logical table source in the Lgical layer
4.Keep the mapping of the columns from the ALIAS table as its is
5. For e.g If you pick Revenue from the Year Ago Alias table it will give you the "Prior Year Revenue"
See if this helps you -
How can I. Update with out using a pc ?.
I need help to upgrate my iPad to use netflix and others add that don't let me to down low need update
If you are, as your device tags indicate, already on iOS 5, all you need is a WiFi connection. Open the Settings app, select General, and then Software Update. Follow the directions. If you are on a version earlier than 5, you will need a computer with iTunes to upgrade.
Netflix only requires iOS 4.2. What makes you think you need to upgrade to use it? -
BDC PROGRAM WITH OUT USING A FM?
Hi Experts,
I need wirte a BDC program for tcode PA30.
i did the screen recording part using tcode-shdb.
i need to use field i recorded as input fields.
Now the main part is how to write code? with out using a class/method?
class/method which i earlier used is class : CL_GUI_FRONTEND_SERVICES.
method: gui_upload.
am not using ny flat file/xml file to upload?
are there any function modules which i can use?
and how to write code with out using FM?
if any can solve my issue would be very helpful...plz provide code...which would be more helpful.
Thanks in Adv.
Krrish.Hi,
If you are migrating employee data, I would suggest you to do it through PA40 transaction rather PA30. systematic screen validations it will go through. If you dont want to use any FM and wanted to do using recording pls find the below code which will update the employee data through PA40 with call transaction method.
SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_plan TYPE ibipparms-path OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK b1.
TYPES: BEGIN OF ty_error,
pernr TYPE persno, " Personnel number
rel_obj_id(12), " Related Object ID
msg(200) TYPE c, " To store Message
END OF ty_error.
DATA: i_tplan TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
i_intern TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
i_error TYPE ty_error OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF w_pa000,
pernr TYPE persno,
begda TYPE begda,
END OF w_pa000.
DATA: wa_plan LIKE i_plan,
wa_messtab TYPE bdcmsgcoll, " Messages
wa_error TYPE ty_error. " Errors
DATA: it_pa000 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
it_pa002 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
it_pa001 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE.
DATA: g_mode LIKE ctu_params-dismode VALUE 'N',
g_file TYPE ibipparms-path.
ALV field catalog
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
Batchinputdata of single transaction
DATA: i_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
Table to hold the return messages
DATA: BEGIN OF i_errmsg OCCURS 10.
INCLUDE STRUCTURE bapiret2.
DATA: END OF i_errmsg.
ALV List header table
DATA : i_header1 TYPE slis_t_listheader.
ALV List header table
DATA : i_header TYPE slis_listheader.
***ALV Events
DATA: is_layout TYPE slis_layout_alv.
DATA : it_event TYPE slis_alv_event.
DATA : it_event1 TYPE slis_t_event.
To get the F4 help for file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_plan.
PERFORM get_filename.
START OF SELECTION
START-OF-SELECTION.
Initialise data
PERFORM initialise_events.
Retrieve data from Excel file
PERFORM retreive_data.
Populate final data into an internal table
PERFORM populate_data.
Process the excel file data to create a record for IT0007
PERFORM process_data.
END OF SELECTION
END-OF-SELECTION.
PERFORM final_output.
*& Form GET_FILENAME
FORM get_filename .
*Function module used for F4 help
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_plan.
ENDFORM. " GET_FILENAME
*& Form INITIALISE_EVENTS
FORM initialise_events .
i_header-typ = 'H'.
i_header-key = 'R'.
i_header-info = 'BDC Interface for PA Infotypes 0000,0001,0002'.
APPEND i_header TO i_header1.
CLEAR i_header.
i_header-typ = 'S'.
i_header-info = 'Hiring, Org.Assignment, Personnel Data'.
APPEND i_header TO i_header1.
CLEAR i_header.
***Events and form name
it_event-name = 'TOP_OF_PAGE'.
it_event-form = 'TOP_OF_PAGE'.
APPEND it_event TO it_event1.
ENDFORM. " INITIALISE_EVENTS
*& Form RETREIVE_DATA
FORM retreive_data .
PERFORM upload_data.
ENDFORM. " RETREIVE_DATA
*& Form UPLOAD_DATA
FORM upload_data .
FM to upload data from excel sheet to internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_plan
i_begin_col = g_colbeg
i_begin_row = g_rowbeg
i_end_col = g_colend
i_end_row = g_rowend
TABLES
intern = i_tplan
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form POPULATE_DATA
FORM populate_data .
processing the internal table generated from the function module
Passing data from Excel file to internal table
CLEAR: g_cnt_processed,
g_cnt_err_processed,
i_intern,
i_plan.
LOOP AT i_tplan.
AT NEW row.
CLEAR i_plan.
ENDAT.
CASE i_tplan-col.
Begin Date
WHEN '0001'.
i_plan-pernr = i_tplan-value.
End Date
WHEN '0002'.
i_plan-begda = i_tplan-value.
WHEN '0003'.
i_plan-massg = i_tplan-value.
Sign
WHEN '0004'.
i_plan-plans = i_tplan-value.
WHEN '0005'.
i_plan-werks = i_tplan-value.
WHEN '0006'.
i_plan-persg = i_tplan-value.
WHEN '0007'.
i_plan-persk = i_tplan-value.
WHEN '0008'.
i_plan-anrex = i_tplan-value.
WHEN '0009'.
i_plan-nachn = i_tplan-value.
WHEN '0010'.
i_plan-vorna = i_tplan-value.
WHEN '0011'.
i_plan-gesch = i_tplan-value.
WHEN '0012'.
i_plan-gbdat = i_tplan-value.
WHEN '0013'.
i_plan-fatxt = i_tplan-value.
WHEN '0014'.
i_plan-famdt = i_tplan-value.
WHEN '0015'.
i_plan-gblnd = i_tplan-value.
WHEN '0016'.
i_plan-anzkd = i_tplan-value.
WHEN '0017'.
i_plan-natio = i_tplan-value.
WHEN '0018'.
i_plan-btrtl = i_tplan-value.
WHEN '0019'.
i_plan-gsber = i_tplan-value.
WHEN '0020'.
i_plan-abkrs = i_tplan-value.
ENDCASE.
Appending the internal table tb_data, tb_chng
AT END OF row.
APPEND i_plan.
IF i_plan IS INITIAL.
g_cnt_err_processed = g_cnt_err_processed + 1.
ENDIF.
ENDAT.
ENDLOOP.
To get the total number of records processed
DESCRIBE TABLE i_plan LINES g_lines.
g_cnt_processed = g_cnt_err_processed + g_lines.
CLEAR g_lines.
ENDFORM. " POPULATE_DATA
*& Form PROCESS_DATA
FORM process_data .
CLEAR wa_error.
REFRESH i_bdcdata.
Check if the employee numbers from the template has already been hired
SELECT pernr
begda
FROM pa0000
INTO TABLE it_pa000
FOR ALL ENTRIES IN i_plan
WHERE pernr = i_plan-pernr
AND massn = 'ZA'.
IF sy-subrc = 0.
SORT it_pa000 BY pernr.
Check if employee has a corresponding infotype 0001 record
SELECT pernr
begda
FROM pa0001
INTO TABLE it_pa001
FOR ALL ENTRIES IN it_pa000
WHERE pernr = it_pa000-pernr AND
begda = it_pa000-begda.
IF sy-subrc = 0.
SORT it_pa001 BY pernr.
Check if employee has a corresponding infotype 0002 record
SELECT pernr
begda
FROM pa0001
INTO TABLE it_pa002
FOR ALL ENTRIES IN it_pa001
WHERE pernr = it_pa001-pernr AND
begda = it_pa001-begda.
IF sy-subrc = 0.
SORT it_pa002 BY pernr.
ENDIF.
ENDIF.
ENDIF.
LOOP AT i_plan.
REFRESH i_bdcdata.
***your recording to be pasted here***
PERFORM bdc_field USING 'BDC_CURSOR'
'P0006-BEGDA'.
PERFORM call_transaction.
APPEND wa_error TO i_error.
REFRESH: i_bdcdata, i_messtab.
CLEAR: wa_error, i_error.
ENDLOOP.
ENDFORM. " PROCESS_DATA
*& Form BDC_DYNPRO
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
ENDFORM. "BDC_DYNPRO
*& Form BDC_FIELD
FORM bdc_field USING fnam fval.
IF fval <> nodata.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
ENDIF.
ENDFORM. "bdc_field
*& Form ERROR_RECORD_DATA
FORM error_record_data .
CLEAR: g_lines,
wa_messtab,
g_msg.
DESCRIBE TABLE i_messtab LINES g_lines.
READ TABLE i_messtab INTO wa_messtab INDEX g_lines.
IF sy-subrc = 0.
CLEAR g_msg.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = wa_messtab-msgid
lang = sy-langu
no = wa_messtab-msgnr
v1 = wa_messtab-msgv1
v2 = wa_messtab-msgv2
v3 = wa_messtab-msgv3
v4 = wa_messtab-msgv4
IMPORTING
msg = g_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF wa_messtab-msgtyp = 'E'.
IF wa_messtab-msgtyp = 'S' AND wa_messtab-msgnr = '102' AND wa_messtab-msgid = 'PG'.
wa_error-pernr = i_plan-pernr.
wa_error-rel_obj_id = 'S'.
wa_error-msg = 'Personnel Number Created Successfully'.
ELSE.
wa_error-pernr = i_plan-pernr.
wa_error-rel_obj_id = 'E'.
wa_error-msg = g_msg.
ENDIF.
APPEND wa_error TO i_error.
CLEAR i_error.
ENDIF.
ENDFORM. " ERROR_RECORD_DATA
*& Form FINAL_OUTPUT
FORM final_output .
CLEAR g_lines.
SORT i_error.
*************added*********************************************
loop at i_error into wa_error.
if wa_error-MSG eq 'No batch input data for screen MP000600 2000'.
wa_error-rel_obj_id = 'S'.
wa_error-MSG = 'Record Created Successfully'.
modify i_error from wa_error.
endif.
endloop.
loop at i_error into wa_error.
if wa_error-rel_obj_id = 'S'.
g_cnt_success = g_cnt_success + 1. " Append success count
elseif wa_error-rel_obj_id = 'E'.
g_cnt_failure = g_cnt_failure + 1. " Append error count
endif.
endloop.
***Field catalog
PERFORM field_cat.
***Assigning Program name
g_repid = sy-repid.
SORT i_error.
***Display Output
IF NOT it_final[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'PF_STATUS_SET'
i_save = 'A'
it_events = it_event1
is_layout = is_layout
it_fieldcat = i_fieldcat[]
TABLES
t_outtab = i_error[].
ELSE.
MESSAGE i015(zv_msg) WITH 'No Data Found for this selection'.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " FINAL_OUTPUT
*& Form top_of_page
text
FORM top_of_page.
***FM for Displaying Heading
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header1[]
i_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "top_of_page
*& Form FIELD_CAT
FORM field_cat .
ENDFORM. " FIELD_CAT
*& Form CALL_TRANSACTION
FORM call_transaction .
CALL TRANSACTION 'PA40' USING i_bdcdata
MODE g_mode
UPDATE 'S'
MESSAGES INTO i_messtab.
If call transaction successful
IF sy-subrc = 0.
g_cnt_success = g_cnt_success + 1. " Append success count "changed
PERFORM error_record_data. " Populate all data
If call transaction not successful
ELSE.
PERFORM error_record_data. " Populate all table
g_cnt_failure = g_cnt_failure + 1. " Append error count "changed
ENDIF.
ENDFORM. " CALL_TRANSACTION -
How to call a stored procedure on time basis with out using sql job and GOTO
Hi,
I wanted to call a stored proc, on time basis ,
please tel me how it can be done with out using sql job , goto .
1) That is, is there any timer aviable in sqlserver.
q2) And which one is better GOTO or sql job.
yours sincerleyRaj, Check if my explanation helps you:
Your job runs every 10 seconds.
Lets say first time you are scheduling and running your job at 12:00:00 PM
Now your proc will start executing.
Say it got finished at 12:00:07.
Now the next schedule time is 12:00:10 PM.
The moment this time hits, the job will get invoked and start executing the proc.
Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go.
PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
your logics inside are complex), you should optimize your code and table architecture.
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is. -
How to get the line in the template (smartform) with out using under score
Hi,
How to get the line in the template (smartform) with out using under score,
and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
Please provide the valueble answer as early as possible.
Thanks,
RaviHi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
Manish Kumar -
How to queue custom events with out using af:calientListener.- onKeyUp.
Hi,
I have a custom component ( extending richinput text).
defined a new attribute called "onkeyup" and added necessary logic in Renderer. Some thing like
write.writeAttribute("onkeyup" , "handleEvent()");
I rendered the java script code too ..... in my custom renderer. ( I neigther want to write java script in metaContainer of document tag nor wants to use resource tag..)
and the handleEvent code is something like this.
function handleEvent()
In this method i want to write the code which pushes my custom event to the queue.
some thing like this..
component = event.getSource();
AdfCustomEvent.queue(component, "customEvent",{payload:component.getSubmittedValue()}, true);
event.cancel();
Usually if use a clientListener then it will call the method { handleEvent(event) } passing event parameter so that we can get the source of that event.
But as i dont want to use the clientEventListener.... as of now... i can't get the component because i don have the event object with my method.
So could any one please letme know , how can i queue my custom event in to my customcomponent... with out using ClientListeners.
Edited by: mchepuri on Nov 9, 2009 10:04 AMHi,
AFAIK, you cannot queue an event to the serverListener without a clientListener.
-Arun -
How do I view ipod music files with out using I tunes?
I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?they should be under ur my music folder if u have windows
-
How can i get new apple id with out using credit card or visa card
how can i get a new apple id with out using credit card or visa card?
Hi xianlycier06,
If you are looking to create an Apple ID without using a credit card, you may find the following article helpful:
Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Regards,
- Brenden -
I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me
Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi 51 KB
Binning example.png 12 KB -
Hi All How to TypeCast in vector<>... typedef struct ... to class...
//how to cast the vector to vector cast with out using loop
// is there any way?
//================ This is Type Definition for the class of ClsMytype=====================
typedef struct tagClsMytype
CString m_Name;
int m_Index;
double m_Value;
} xClsMytype;
//================ End of Type Definition for the class of ClsMytype=====================
class ClsMytype : public CObject
public:
ClsMytype(); // Constructor
virtual ~ClsMytype(); // Distructor
ClsMytype(const ClsMytype &e);//Copy Constructor
// =========================================
DECLARE_SERIAL(ClsMytype)
virtual void Serialize(CArchive& ar); /// Serialize
ClsMytype& operator=( const ClsMytype &e); //= operator for class
xClsMytype GetType(); // return the typedef struct of an object
ClsMytype& operator=( const xClsMytype &e);// = operator to use typedef struct
ClsMytype* operator->() { return this;};
operator ClsMytype*() { return this; };
//public veriable decleare
public:
CString m_Name;
int m_Index;
double m_Value;
typedef struct tagClsMyTypeCollection
vector <xClsMytype> m_t_Col;
} xClsMyTypeCollection;
class ClsMyTypeCollection : public CObject
public:
ClsMyTypeCollection(); // Constructor
virtual ~ClsMyTypeCollection(); // Distructor
ClsMyTypeCollection(const ClsMyTypeCollection &e);//Copy Constructor
DECLARE_SERIAL(ClsMyTypeCollection)
virtual void Serialize(CArchive& ar);
xClsMyTypeCollection GetType();
ClsMyTypeCollection& operator=( const xClsMyTypeCollection &e);
ClsMyTypeCollection& operator=( const ClsMyTypeCollection &e); //= operator for class
void Init(); // init all object
CString ToString(); // to convert value to string for the display or message proposed
ClsMyTypeCollection* operator->() { return this;}; // operator pointer to ->
operator ClsMyTypeCollection*() {return this;};
public:
vector <ClsMytype> m_t_Col;
//private veriable decleare
private:
//===================================================
ClsMytype& ClsMytype::operator=( const xClsMytype &e )
this->m_Name= e.m_Name;
this->m_Index= e.m_Index;
this->m_Value= e.m_Value;
return (*this);
//==========================Problem for the vector to vector cast
ClsMyTypeCollection& ClsMyTypeCollection::operator=( const xClsMyTypeCollection &e )
this->m_t_Col= (vector<ClsMytype>)e.m_t_Col; // how to cast
return (*this);
Thanks in AdvanceHi Smirt
You could do:
ClsMyTypeCollection* operator->() {
returnthis;};
// operator pointer to ->
operatorClsMyTypeCollection*()
{returnthis;};
public:
vector<ClsMytype>
m_t_Col;//??
The last line with "vector<xClsMytype>
m_t_Col;". It compiles but I doubt that is what you want.
Regards
Chong -
How To Split File In to Multiple Files With out using B.P.M
Hi Guys,
How To Split File In to Multiple Files With out using B.P.M.
Thanks in advance
Regards's
KIran.BHello
below r the links were u will find message spilitting by graphicaaly i.e without using BPM.
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
Sender File Adapter with file conversion Multimapping --file content conversion with split messg mapping
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2748---- [original link is broken] [original link is broken] [original link is broken]
multimappig
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
hope this resolve your problem
thank's
Chetan -
How to print a string with out using main method??
how to print a string with out using main method??
if we can tell me with example?
thanks in adavance
rajaHi,
actually there's none. The UITableView class needs to "know" the tableView's height so either it can calc <number of rows> times <row height> or it has to sum the height of each single row.
If the row which needs to be of different size always is the first or the last row you can user a tableHeader or tableFoot view.
Regards
Dirk -
How to know the size of the string with out using the length() method
i want to find the lenght of the
String s="Sudha";
with out using the lenght() method.Not true (I mean the part about "The only String
call"). But if it had been true, I might haveagreed
with this:
Assuming one uses the 'exception' approach thenwhat
method other than charAt() is needed?I probably misunderstood your post, I thought you
meant that the only alternative to length() would be
charAt() and catching the exception.There are many ways and if the teacher had said find 5 ways of finding the length of a String then I would have fealt happier because it would have meant the student would have to read and study the whole of the String API.
I like
int length = (s+"sabre").lastIndexOf("sabre"); -
How can i get apps with out using credit card info because i do not have a card ?
how can i get apps with out using credit card info because i do not have a card ?
Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud.
Maybe you are looking for
-
Oracle 11g: Oracle insert/update operation is taking more time.
Hello All, In Oracle 11g (Windows 2008 32 bit environment) we are facing following issue. 1) We are inserting/updating data on some tables (4-5 tables and we are firing query with very high rate). 2) After sometime (say 15 days with same load) we are
-
From where we can get error log of delivering state
Hi Experts, I have processed large file and itseems the message got picked up successfully from sender side and got stucked in deleivering state. Can anyone suggest from where can we get error log that why the message is in delivering state. I have
-
Good morning, I'm building tables of contents programmatically and save them as tagged text for importing into InDesign (CS3) for later export to PDF. That works fine for bookmarks and hyperlinks to web sites but not for links to other PDF documents.
-
I just bought a 42'' HDTV two days ago, and i think it's a little big for my bedroom. So i want to change to a smaller size. I already open the box because i need to try it first at home (but everything is new and no missing parts). So if i want to b
-
I updated my ipod this morning and it worked fine. I never needed a password to use my ipod before this. I tryed to get back in and it asked for a PASSCODE. I tryed my password 3 times and now it just shows "ipad disabled"