How to do lookup to master data in self transformation
Hi Experts,
Could any one please help me on this
i have created a self transformation for 0TCTUSERNM in the transformation i need to write an end routine to look up to charecterstic ABC in order to populate its attributes to 0TCTUSERNM
Thanks In Advance,
Nitya
Hi Experts,
Could anyone please help on this
there is a charecterstic ABC which has all the master data its key field is only one that is user
from ABC we are trying to load data to 0TCTUSERNM where it has two key fields SISID and TCTUSER
we have mapped from ABC keyfield user to TCTUSER of 0TCTUSERNM
requirement given is
build a transformation from ABC to 0TCTUSERNM
secondly build aself transformation for 0TCTUSERNM where it has to look up to ABC to get all its attributes to 0TCTUSERNM
Note : ABC is having all the attributed filled for all user
where as 0TCTUSERNM couild have several records of same user from different source systems
ex : in ABC we have an user called TOM , in 0TCTUSERNM we could have 5 records for TOM
like TOM Source System 1
TOM Source system 2
TOM source system 3 etc
So initially when we do a transformation from ABC to 0TCTUSERNM
we can only get one record updated
but wht about the attributes of other 4 records of TOM
for that we want to do self transformation for 0TCTUSERNM where we want to look up to ABC to fill all records
Please tell me if i am not clear
Please help
Thanks in Advance
Nitya
Similar Messages
-
How to maintain the material master data in plant
Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
BaluCheck the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.
-
How To... Update Master Data during upload of transaction data
Can anybody let me know how this can be achieved.
I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
I dont want separate datasources.
The datasource is actually transactional datasource.
I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
How To... Update Master Data during upload of transaction data
Thanks.Dear Praveen
I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
I got the below link which may be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8 -
How are attribute and text master data tables linked in SAP R/3?
Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
ThomasHi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max -
How to Send the material master data from sap4.6c to ECC6.0
Hi
Friends this is shalini Shah, i got one requirement that is
how to send the materail master data from SAP 4.6C to ECC6.0 using XI.
i know the file to idoc and idoc to file scenarios but i don't know this one.
please help me friends, Thanks in advance.
Regards
Shalini ShahHi Shalini,
To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3 (4.6 and ECC 6.0)
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
U need to import the IDoc types both inbound and outbound to XI.
1. Create Inbound and Outbound Message interface.
2. Do one to one message mapping.
3. Define an Interface mapping.
ID:
1. Create 1 Sender aggrement.
2. Create 1 Receiver aggrement.
3. Define 1 RD and ID.
4. Only create an receiver IDoc CC.
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way. -
How to Maintain the MM Master Data from one company code to other co code
Hi Experts,
Can any one pls tell me how to Maintain the MM Master Data from one company code to other co code.
Presently we created New plants,New Purchase Orgs under different company code.
1) Material Master data
2) Vendor MAster data
3) PIR
4) Source List
Is there any standard Transactions...??
Please reply.
Brgds,
KKHi
Check out the link -
http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreateasimpleLSMWusingbatchinput+recording
lsmw for data migration for xk01 transaction
http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
Regards
Anand -
How can I upload text master data for attribute-only Charactertic?
I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
How can I upload text master data for attribute-only Charactertic?
Thanks!Hi roberto,
I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search. -
How to collective read PP master data in Production order?
Hi: Guys
Please tell me how to collective read PP master data in production orders. in COHV, I can find out some collective functions but read PP master data.
Thanks
HenryRead PP master data is only to update routing and BOM in production order if it is already created to effect the changesmade in routing and BOM. I think in that collective option is not possible.
Regards
KrishnamurthyDSS -
Read Master Data in BW Transformation
Hi,
I am using BW 740 SP02 and I need in a transformation rule to use the option "READ MASTER DATA", In fact this enables me to use all attributes of an infoObject and affect them to my data target ( Infocube).
I was wondering if there would be any possibility to affect also master data text of an infoObject and affect them to a data target?
I know that master data text are available through Bex queries, but for my case I need to have them in my Infocube.
Best Regards,
RAFIKHi Mohamed,
Using standard rule type this is not possible
However there are two ways to achieve this:
1. you use abap routine to read the text value from text table of info object (BIC/Txxx) in transformation
2. a. add a char info object to your master data
b. create another transformation from text data source to populate this new field (which is actually text)
c. create DTP to populate this new field with text values
d. now you can easily use, 'read master data' rule in transformation and assign the text field to your target field
hope this helps,
Purvang -
Hello All,
I have an Infobject say 0MATERIAL which has two Navigational Attributes say MATERIAL1 and MATERIAL2.
These are part of Master Data. My objective is to have MATERIAL1 and MATERIAL2 in my cube so that I can directly report on these without having to go drilling.
I have 0MATERIAL, MATERIAL1 and MATERIAL2 in my cube, but the twist is 0MATERIAL is mapped to 0PLANT (say). Is it possible that I can escape from the LookUp or is it mandatory. I have tried the "Master Data Attribute of " option in the Update rules, this does'nt seem to work some how.
If LookUp is mandatory can some one help me with the ABAP part of the scenario.
I assure full points.Just to be sure...
1. 0MATERIAL has no Compounded attributes in the infoobject definition
2. MATERIAL1 and MATERIAL2 have no Compounded attributes either
3. MATERIAL1 and MATERIAL2 are attributes of 0MATERIAL
4. 0MATERIAL, MATERIAL1, and MATERIAL2 are all characteristics of your cube
Yes?
If this is so, then in your update rules for MATERIAL1 (and MATERIAL2), you should be able to map it as "Master data Attribute of" 0MATERIAL.
0MAT_PLANT should not factor into the equation just because 0MATERIAL is an attribute.
Does this help? -
How InfoSpoke reads time dependent master data ?
Hello Experts !!
How InfoSpoke reads the time dependent master data ?
What key date it reffers to ?
Can you please explain, I want to use this concept in writing master data lookup for time dependent attributes of 0MATERIAL.
Thank a lot !You can either specify the time period in the filtering area of infospoke or you can implement a transformation BAdI -OPENHUB_TRANSFORM to manipulate the data whichever way that suites your requirement. All time dependent infobjects have datefrom and dateto fields which you can use to choose your data range accordingly.
Hope this helped you. -
How to restrict Internal Order master data changes
Hi Experts,
We have internal orders that have no Functional Area assigned to it at the beginning of the month, but part way through the month a change is made to the master data and a Functional Area gets assigned to the internal order. When settlement is run at the end of the month, part of the internal order has a FA blank and part of the internal order has a FA of OPEX or G&A depending on what was assigned in the master data. This causes an issue because they don't offset.
Typically if no change was made to the master data during the month, all the transactions to the internal order with FA blank would offset and there would be no issues on settlement.
So, how can we control in the system that does not allow changes?.
Thanks
SanjuHi Sanju
If FA is not needed at all in the IO- hide that field in the order type screen layout.
Otherwise, restrict the authorization to someone who understands the criticality of it
Last resort, implement user exit which won't allow to add FA if transaction data exists. You can search for the exits as COOPA* in SMOD
Br. Ajay M -
How to create time dependant master data table in R/3?
Hi gurus,
I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
Manager may change periodically.even i need to maintain all the changes in R/3.
Thanks & Regards,
Bharathbuilt-in type method means.,
there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected.... -
Abap in Transfer Structure to lookup in Master Data
Hello Friends ,
I need help with one ABAP code...
I have an Infoobject 'Employee' which is mapped to source system 'A' in the transfer structure . But now I want it to look into my 'employee master data' and get populated from there.
Please suggest the ABAP code for this requirement .
Thanks a lot!!!Hello SAP_newbee
Here is the code for master data lookup
DATA: L_TGTFIELD LIKE RESULT.
L_TGTFIELD_CHVAL = COMM_STRUCTURE-XXXXX. "XXXXX is name of master data IO
CALL FUNCTION 'RSAU_READ_MASTER_DATA'
EXPORTING
I_IOBJNM = 'XXXXX' " Master data IO
I_CHAVL = L_TGTFIELD_CHVAL " Value of master data for which u want see attribute vale
I_ATTRNM = 'YYYYY' " Name of attribute, infoObject tech name
IMPORTING
E_ATTRVAL = L_TGTFIELD
EXCEPTIONS
READ_ERROR = 1
NO_SUCH_ATTRIBUTE = 2
WRONG_IMPORT_PARAMETERS = 3
CHAVL_NOT_FOUND = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 1 OR 2 OR 3 OR 5.
* Error during read --> Skip whole package
ABORT = 4.
Copy error message into errorlog
MOVE-CORRESPONDING SY TO MONITOR.
APPEND MONITOR.
WHEN 0 OR 4.
Attribute found successfull or not found
RESULT = L_TGTFIELD.
ABORT = 0.
ENDCASE.
Thanks
Tripple k -
How to find all the Master data extract structures and Extractors
I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
Question: How to get a complete list of all Master data extract structures and corresponding extractors?
Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
Regards
SasankaHi,
try the table ROOSOURCE and search the data source with string in astrick attr for master data and for text with text
This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
Thanks
Ajeet
Maybe you are looking for
-
Hi, Can we show a 'Information Message' on the variable screen for 1 particular query! I have a user exit variable in the query and I believe I can use this user exit variable to show the information message on the varable screen. When we run the que
-
Installation issue on opensuse 11
Hey All,<br /><br />Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running.<br /><br />This is what Ive done so far. I've successfully set-up the latest copy of op
-
forwarding an email TB changes account to one of my other accts which is not the default acct & is not acct from which msg was sent (which was default acct) how do I make TB keep the same account (which is my default account anyway) from which I sent
-
Loosing Actions When I Close Photoshop
Ever since I got a new comp and dl cc, every time I close ps I loose ALL my actions and I have to re input them in when I open it back up. This is really annoying and it costs valuable production time. Does anyone know how to fix this so they are sti
-
OutputStream is already being used for this request.
I have been trying to get images fom Oracle Database and displaying from JSP but get an IllegalStateException:OutputStream is already being used for this request. My code is as follows: <% Connection con = cods.getConnection(); Statement st = con.cre