How to do PhotoFrame effects manually?

I used Extensis Photoframe all the time for quick effects around pics. However, we finally purchased a Mac Pro with CS3, and Photoframe doesn't work anymore. I can open the frame files, but how do I layer or mask them onto pics? I would like to upgrade Photoframe, but after spending $7,000 on this new workstation setup, they won't be letting me purchase anything else anytime soon!
See here:
http://209.160.12.112/photoshop

A couple of ways. One would be to load the PhotoFrame image as an Alpha Channel, invert the image and load a selection by command clicking on the channel icon image. Assuming your image is a floating layer just hit delete. Of course that's a destructive technique.
A non destructive techique would be to load the PhotoFrame image as a layer, invert it, use Peel off White, place it below the image layer, option click on the line between the two layers to use the PhotoFrame image as a clipping mask.
http://www.bergdesign.com/plugins/

Similar Messages

  • How to have an effect show up in a certain part of the clip?

    I'm resonably new to AE and I'm editing a video where the guy pulls a scoped gun up to his face, and I was wondering if there was a way to have only the scope lense get brighter as he pulls it up to his face. Thank You For Your Help.

    BTW, here are a couple of videos in which I show how to have an effect only apply to one item in a scene:
    - using Roto Brush
    - using masks (manual rotoscoping) and motion tracking

  • How to know side effects of implementing an SAP Note

    Hi All,
    Im new in implementing SAP Note.
    Kindly suggest how to analyize whether implementing an SAP Note will cause some side effect.
    How to do that ,I think just by looking at code can we assure that there will be no side effects.
    Kindly suggest.

    hello,
    the easiest way is to implement note and check the functionality manually for example execute transaction and post document or you could open the correction object (ABAP code) and analyse the correction which ll be imported and how those changes will effect your systems work. if you implemented the note and you noticed that corrections destroyed your previous functionality then you could rollback the note in your development system.
    best regards
    dez_

  • How planned delivery time effects delivery creation?

    Dear All,
    Some time before, while placing order thro' CRM, we came across a typical error (hard error).
    "date (11/12/2011) lies afterthe end of validity calendar". 
    we could not place order in CRM but in SAP we could create save the order despite of same error but soft. However system didn't allow to create delivery for same order & same error message populated"
    Later it was found that it is because for material  " Planned Deliv. Time  maintained for say "X "days in material master MRP2 view" & was corrected.
    How planned delivery time effects delivery creation?
    For material even though planned delivery time was maintained as say for 500 days, sales order requested delivery date & delivery date in order schedule line got determined as order date (Considering avaliability of funds & material).
    i.e order date/req. delivery date/delivery date in schedule line are same as date on which order is placed.
    Regards
    Suhas W

    Hi,
    Extended your factory calender in SCA3.
    Regards,

  • How do I automatically or manually add incoming e-mail addresses to my address book?

    How do I automatically or manually add incoming e-mail addresses to my address book?

    Automatically? Really?? All addresses of all senders just sucked into the address book, spammers, advertisers and all?
    Where an address appears in the panel above the message text, there is a star alongside it. Click this star to add the address to your Address Book. Once you have done that, you can click the star again to edit the address book entry.
    Note that if the star is empty/grey (silver?) the contact is unknown. If the star is filled/yellow (gold?), the Contact is already in your address book. (This is very like the way bookmarks are managed in Firefox.)
    If you really want all senders' addresses entered indiscriminately into your address book, this add-on may be of interest.
    https://nic-nac-project.org/~kaosmos/index-en.html#addrcollector

  • How to Load a class manually

    Hello Friends,
    I need a help regarding how to load a class manually.
    i have the class name -- TestClass1
    and Path - com.apps.classes
    Thank you

    Thank You------
    I got the result
    String classPath = com.apps.className;
    Object obj = Class.forName(classPath).newInstance();

  • How to show asterisk * effect once the user starts editing the document??

    I wrote a java text editor. I creat a new internal frame and allows to open a document.
    How to have an effect (an asterisk * follows the filename in title bar) once
    the user starts editing the document? And once I save that file, that asterisk * will
    disappear. It seems to me we need to add a listener, but not sure how to change
    the title bar of internal frame??

    just use DocumentListener like
    myTextArea.getDocument().addDocumentListener(new DocumentListenet(){
    public void changedUpdate(DocumentEvent e){
    frame.setTitle( frame.getTitle() + "*" );
    implements two other methods too

  • How to do the effects used in this video?

    Hi,
    I'm curious as to how to do these effects in this video:
    Childish Gambino Type Beat - Inhale Ft. Drake - YouTube
    Mainly I'm looking for the colors, but knowing how to do the scratches would be nice too.
    Any information is greatly appreciated

    Typical film damage effects. You can purchase footage to overlay or you can fake it with blurred shape layers and blend modes.
    Scratches are also just film damage effects. There are a ton of tutorials and a bunch of stock film damage clips you can purchase.
    http://www.shutterstock.com/video/search/film-damage-effect/
    film damage effects
    Not all tutorials on YouTube present good info so you'll have to sort out the good from bad by trying to guess which folks have some experience.

  • How to make this effect in Keylight?

    Hi, I have question, how to make this effect in Keylight?
    I know that this overlay is added here:
    http://oi57.tinypic.com/1174fup.jpg
    Photos:
    http://iv.pl/images/18475588964010299091.jpg

    Keylight what? All I see is some effect similar to Leave Color, a.k.a the Pleasantville effect that made the rounds 10 years ago. It may require additional masking and otehr effects, but definitely not something that is specifically related to Keylight...
    Mylenium

  • How to send the data manually

    Hi Experts,
      I need small information.when messages are gone into queue state due to one message 
    When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
    if i cancel the first message then remaining all the messages are processing successfully.
    So from that cancel message i want sent the data manually as business needs that data.
    Can all please tell  me how to send the data manually with steps.
    Thanks in Advance.
    Bhaskar

    Hi,
    I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
    In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
    Regards,
    Sarvesh

  • How to avoid Moire Effects (jiggered still pictures) using iM and iDVD.

    This is a discussion going on forever and forever in this forum. I had the problem of bad looking slideshows myself, and I am hearing the same tips over and over again that just don't work. This is what I found out on how to avoid moire effects in your still images, when you want to edit a slideshow using iMovie - and I personally think, this explanation makes a lot of sense.
    Try it on your own and you will have had the last bad looking still image slidehow on the TV screen ever!! Here we go:
    Like everybody here I am talking about the process of creating a slideshow incuding movie strips in iMovie to get as a final result a DVD with menus and such using iDVD.
    And the common problem with stills and iMovie 5.02 are the so called jiggered pictures iMovie creates. Call it a moire effect, if you'd like.
    Whenever full resolution still images are importet from iPhoto into iMovie, the quality that iMovie will spit out in the end is disgusting. Period. Just disgusting.
    It has nothing to do with that iMovie does not display it properly on the Monitor or we are just in preview mode - the results are bad there and will be bad (maybe even worse) on the TV screen.
    There is no SIGNIFICANT difference between wether the pictures are imported with KB on or off, whether they are imported as still frames or as video clips using iMovie "import" function. iMovie can treat the color fairly bad, overprocesses the pictures and - worst of all, the moiree effects you will see in the endresult are just very very bad. It is worse when the pictures are panning a lot (KB).. This is true for every picture containing a lot of detail (Trees, Forests, horizontol lines (stairs) etc.) - not so bad for closeup face shots, unless that person is really old
    There is no SIGNIFICANT difference on the result by how the iMovie project is fed into iDVD. When the movie is sent to iDVD using the iM command "send to..." the quality is worse (and you let iM render when it asks) than if the movie is dragged into the iDVD window - but again, the difference is not significant. The result will suck. The DVD will also look bad, when the iMovie is exported has high res quicktime first, before imported into iDVD. Again, its slightly better that way, but not significant.
    Whenever a slideshow is created in iPhoto and than exported to iDVD (or via being a quicktime movie through iMovie into iDVD) the result will be however stunning. But that totally defeats the purpose of iMovie and the degree of freedom of designing slidehows in a very appealing manner.....
    The problem I think lies in how iMovie processes still images. And this is not a bug, but more of a mathematical/programmatical problem. iMovie has to REDUCE THE RESOLUTION of your still. A 2000x3000 pixel image @ 300 dpi(roughly the dimensions of a 6 MP image) has to be downsized to a TV image (NTSC or PAL, whichever) which has a resolution of approximately 480x640. HD is accordingly higher. The amount of pixels has to be reduced. iMovie can do that. NOT GOOD. But it can. The problem starts when the picture is panning around (KB). iMovie makes a let us say 5 second movie @ 30 fps out of one still image. Almost every frame will be slightly different from the previous one due to the used KB effect. So, the routine of iMovie does this downsize calculation for each single frame - and it removes each time different pixels from the still image, due to a slightly different source still image. Got it?
    Now, when you look on how moiree effects occur (which is some weired math in it's own) than it makes sense, that we see all this jiggereing in horizontol lines of high res. patterns.
    I found that if I reduce the size of each image in Photoshop (or Photoshop Elements) prior to importing it into iMovie, the quality of the final product that iMovie and subsequently iDVD spits out in the end is AMAZING (reduce the dpi to approx. 72, so the image resolution is roughly 480x640). This is not a difficult process, because both programms (PS and PSE) handle BATCH PROCESSING. Just let the Mac work for a couple of hours or so.... its WORTH IT (and don't forget to make copies of the high res originals beforehand... :D).
    (before you resize, find out about how to properly resize and rescale an image!!!!)
    I am slightly annoyed that I found that out after producing a long long long long and really good slightshow, that is watchable but looks REALLY cheasy and cheap).
    I hope this helps out.
    Waenni
    Mini G4   Mac OS X (10.4.8)  

    I agree that iMovie's still image quality is embarassingly bad and has many bugs.
    Even with no Ken Burns, the sharp images tend to flicker on a TV because iMovie doesn't blur them properly.
    And as you very well described, iMovie's Ken Burns produces uneasy zooms/pans because the subpixel rendering is, uh, suboptimal.
    iMovie's immortal rendering bug when exporting non-Ken Burns'ed images to iDVD/tape doesn't make things any better.
    Yes, bicubically downsampling the input images to 640x480 or adding gaussian blur to the megapixel input images takes care of the flicker and uneasy zooms/pans, but as a side-effect the maximal zoom-ins are then TOO blurry.
    The best workaround is to use Photo To Movie's higher quality export setting. It has the best quality rendering engine (I recently compared it to Still Life and FotoMagico). Disclaimer: I'm just a satisfied customer of Photo To Movie.
    See also:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow

  • How can i move photos manually in iPhoto

    how can i move photos manually in iPhoto

    This seems to be a recurrent problem. There is no very simple way to move a photo within an Event. However, the following (which I have not seen posted anywhere) works without needing to go to Albums, and is not too laborious for a few photos:
    Go to Events in the menu on the left, under LIBRARY.
    Select your event.
    Highlight the photo you want to move, then go to the menu bar at the top of your screen (not window) choose Photos > Adjust Date and Time.
    Adjust the date and time to get the photo to appear at the postion you want (sorry, you'll need to check the dates and times of the photo one side of where you want it to go first). Do this and your photo should move to the new position, defined by its new date and time.

  • Title: How to give transparency effect to JFrame?

    Hai,
    we are developing stand alone application using java swing. In our application we need to show an image in JFrame. We draw an image in JPanel using JPanel's paintComponent method. Then we place this JPanel into JFrame. The image is having transparent effect. But we are not able to give transparency effect to JFrame so we couldn't see desktop we are seeing only JFrame's background. *{color:#0000ff}How to give transparency effect to JFrame?*
    *{color}*
    Thanks for your help.

    It's not a commited part of the standard API yet, but as of 1.6_10 you can add transparency effects to a window through the use of
    com.sun.awt.AWTUtilitiesI think this was the original article on the release. If you google, you will find many creative ideas that people have come up with using this particular feature.

  • How to take a backup manually in oracle 11g express edition?

    how to take a backup manually in oracle 11g express edition? i want to take backup of a database and want to restore later on on a different computer .

    Stop database, and copy all files to another machine.That sounds to me to be the closest answer to the question posted. And perhaps the easiest solution.
    Install XE on the "another machine", shut it down. Shutdown the source database. Copy the datafiles to the new host. Startup your "new" database, it will be an exact clone of the original.
    To find out what files need to be copied, as system (or sysdba) run:
    select name from v$datafile;
    ... file1, file2 ...
    show parameter control
    ... control_files ... file1 ...
    alter database backup controlfile to trace [reset logs];
    show parameter diag;
    ... diagnostic_dest ... <drive:>|/diag_pathTo do a proper database clone its better to recreate the controlfile and reset the archive sequence number- leave out the controlfile copy part. In the diag_path location find the trace file under diag/rdbms/$ORACLE_SID/<db_name>/trace it should be the latest ora*.trc file.
    The trace file has the commands to recreate the controlfile, which includes the datafiles and putting the tempfile back in place. If the datafiles are in a different location, i.e. in Windows going to a different drive, or you want do put datafiles in a different folder location, the create controlfile statement is the easiest time to get the file directories right.
    If you add the "reset logs" qualifier (don't use the brackets!) you'll get just the reset logs version of the create controlfile statement, otherwise you'll get both NORESETLOGS and RESETLOGS versions of a create controlfile statement, run one or the other. Not both. Not the entire trace file, just the create controlfile, alter database open [reset logs], alter tablespace temp add tempfile ... bits. No recovery is needed for a database that is shutdown when datafiles get copied to a new location/host.

  • How to achieve this Effect?

    Hey everyone i was wondering if you guys had any idea how to achieve this effect in flash.....http://www.youtube.com/watch?v=QftcJtvLr8g

    While you could probably do this in Flash, it is much more simply done using AfterEffects. There's a splendid text tool that can be tortured into effects like this. Have a look at the podcasts from Creative Cow on AfterEffects for some interesting examples.

Maybe you are looking for