How to do port forwarding from wla2-g54l Buffalo bridge to mac mini

Hi,
I am trying to get Azurus to remove the "firewall block" message and I think I have narrowed it down to port forwarding.
I have set up port forwarding from my X modem to the Airport Xpress base station. I have then set up the port forwarding from the base station to the buffalo.
The problem I have had is setting up the wla2-g54l to forward the same port to the mac mini....
any Ideas? Not much luck on the Buffalo website.. and I have RTFM. Many times!
Cheers
Mac Mini G4 1.2Gz   Mac OS X (10.4.8)  

It sounds like your set-up is in a horrible mess with 3 levels of NAT going on.
What you should really have is the X-Modem configured in it's default mode "Modem Mode" where there will be no need to do any port forwarding as the modem is acting as a pure modem without having any influence over ports.
Then the Airport express should be configured to "Distribute IP addresses" so that the Airport is acting as a router. I presume that you use the Buffalo unit as a repeater for the AIrport so you should set-up WDS so that both are on the same network. Then your computers will all be using IP addresses in the 10.0.1.x range as issued by the Airport. You can then configure the Airport to directly forward ports to the IP address of your computer. Therefore only one instance of NAT and only one set of port forwarding rules.

Similar Messages

  • How do I transfer files from one user account on the mac mini to another user account?

    I had to set up a new user account for my son.  I need to transfer files from his old user account and from my user account to his new user account on the mac mini.  How do I do this? 

    Move them to /Users/Shared/ and then into the new account.
    (85692)

  • How Do I transfer Files From My PC to my new Mac mini?

    I am saving all my Word documents, music files, picture files on CDs to upload to my new Mac. But, what about things like certain program files, like Adobe, etc., and Mozilla Firefox favorites, passwords, etc.? I expect to get my new Mac mini within 2 weeks, and I want to be as prepared as possible. Help! Also, the operating system listed on my purchase order says Mac OSX Snow Leopard, but there wasn't anything to select that option, so I put Mac OSX (10.6.5) because I assumed that was the most current.
    Thanks in advance for your help.
    My PC is running Windows XP.

    welcome to the bright side of computing, Joe !
    you might find [_*Switch 101*_|http://www.apple.com/support/switch101> informative.
    also see
    *from a user*:
    http://www.myfirstmac.com/index.php/mac/articles/one-page-crash-course-in-switch ing-to-the-mac
    *Very useful tutorials on Macs here*:
    http://www.apple.com/findouthow/macosx/
    *Last but not least*:
    Learning how to use Apple OS X in 27 easy lessons!
    http://www.apple.com/support/mac101/work/
    JGG

  • Rv320 - port forwarding from a specific WAN IP

    Hi, i just received and configuring the rv320 router. I can successfully set the port forwarding from WAN to specific LAN IP address. I would like to know is it possible for this device to set the port forwarding from a specific WAN IP address? Thank you for the help.

    I have the same problem, and have already tried creating a Access Rule without success. I need to forward Remote Desktop Port 3389 from a specific public IP address to a internal server. I do this with other lower-level Cisco Small Business routers all the time, but cannot get this to work with the RV320. Here's what I've tried:
    1) Create new Access Rule
    2) Create new Service called TS for TCP port 3389-3389
    3) Set new Access Rule to Allow
    4) Set Source Interface to Any (I've also tried WAN1, etc.)
    5) Set Source IP to the only single public IP that will be allowed
    6) Set Destination IP to the single internal IP address
    7) Set Scheduling to Always
    When I use any standard RDP app from the outside, the router blocks 3389 access.
    What am I missing? Can anyone help resolve this, or do I need to call in to Cisco Support?

  • How can i sync my iTunes library from my iPhone with my new mac mini

    Recently my hard drive failed on my mac mini.  I had burned a bunch of CDs on the old mac mini and then sync'd it with my iphone.  Now the CDs are on my iphone but not on the new mac mini.  How can I sync my itunes library from my iphone to my new mac mini?

    The iphone is not a backup device.
    You need to copy everything from the backup copy of your computer computer to your new one.

  • How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

    How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • How can I transfer songs from my iPhone 4 to my new mini iPad.  My PC is not working.

    How can I transfer songs from my iPhone 4 to my new mini iPad.  My PC is not working.

    if they're songs you purchased from itunes go to the itunes store on your ipad, go to purchased, and download from there.

  • How can I transfer pictures from my MacBook Pro to my iPad mini please?

    How can I transfer pictures from my MacBook Pro to my iPad mini please?

    If you are on iTunes 11 on your Mac then you may want to re-enable the left-hand sidebar via View > Show Sidebar, which might make it easier to navigate and may instructions may make more sense.
    To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
    If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

  • I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help.  Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive. 

  • I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data.  How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)

    I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data.  How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)

    Unless you transfer the files from Setup Assistant, Migration Assistant creates a new user with the data.
    To transfer the files to your first user, you have to log on this new user, and copy all your files to /Users/Shard folder. This is a folder where you can put the files you want to share between two or more users, and all users can read and write in it.
    After copying the files, go to your first user, open /Users/Shared folder, and copy the files to your user folders. If you migrated applications, you must know that they are stored in a common folder (/Applications), so you don't have to transfer them. To open /Users/Shared folder, open Go menu (in the menu bar) > Go to Folder, and type the folder

  • HT204135 how to re print job from print queue listing on a mac?

    how to re print job from print queue listing on a mac?

    Hello there! Welcome to the forums @technolingua ,
    I read about how you are looking to print envelopes from Mavericks. I would suggest checking out the links below to help you out!
    Create envelopes by using Mail Merge
    Print Envelopes (Mac)
    How to Print Envelopes on a Mac
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I transfer my pictures from my iMac to my new Mac Mini?

    How do I transfer my pictures from my iMac to my new Mac Mini?

    Are they in an iPhoto Library? If so:
    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.

  • How do i up load from my ipad to my new mac computer

    how do I up load from my ipad to my new mac computer?

    I answered your question in your other post. No need to ask twice.
    How do I download photos on my iPad to my hard drive computer?

  • How do you import photos from your scanner on to your mac book?

    How do you import photos from your scanner on to your mac book?

    When you scan an item the resulting scan is stored as an image file on the computer.

  • How do I transfer data from an iMac to a new Mac laptop?

    How do I transfer data from an iMac to a new Mac laptop?

    You'll be given the option to do so while setting the new Mac up; it can be done from an external drive or through Ethernet, FireWire/Thunderbolt, or wirelessly.
    (109869)

Maybe you are looking for

  • IPhoto 9.3.2 hangs on 10.8

    When i click on share in the menu bar iPhoto stops responding. I already used command-alt during iPhoto (9.3.2 on 10.8)  start to rebuild the library. Date/Time:       2012-08-13 09:24:35 +0200 OS Version:      10.8 (Build 12A269) Architecture:    x8

  • Cancel the PO

    Hi experts, How to cancel one PO? &what is the t-code available? Thanks in advance Deepa.V.G

  • Newbie Connection Problem ! (WRT54G)

    Firstly I apologise if this sounds a bit dumb! I set up a new wirelss router, hardwired to a PC and using wireless on my laptop. I ran it from the CD rom and everything was set up securely and worked fine. Inadvertantly I pressed the SES button on th

  • URGENT open source plug-in

    is there open source plug in that can helps me to place a powerpoint presentation inside a JFrame so i can get the mouse coordinates?? plz reply ASAP and thank you very much :)

  • Mail Sending Feature

    Our client a requirement, He want tp push the BW reports to salesrep trough black berry or through URL. The requiement is if a salesrep login useinghis id the repor s has to show the list of vlaid customer he his handling and value.. Here the issue i