How to do Service GRR Reverse / Cancel through ML81N

Hi,
When i m reversing the Service GRR through ML81N, we are facing the below mentioned error: -
617 Acquisition value negative in area 01 .
Kindly help me...
Regards...

Hi,
The asset/asset class is not configured for negative values. If you want to allow negative values then change the configuration for asset class/asset by selecting check box "Negative values allowed".
For more check the Note 1025126.
Regards,
Biju K

Similar Messages

  • Reverse/cancel service entry sheet

    Hi Friends
    How to cancel reverse/cancel service entry sheet
    pl guide
    regds
    Anil

    Hi,
    Go to TCode: ML81N, Click on other purchase order. Enter the Entry sheet/Purchase order number you want to cancel. Then the details will be copied, then click on change and then click on revoke acceptance icon.In this way you will revoke the SES. If you want to delete the SES, after revoking SES click on Delete icon, So that the SES will get deleted.
    Regards,
    Biju K

  • How to reverse canceled invoice

    HI gurus,
           I have created an invoice through MIRO, it has posted one million to the exchange rate gl. It's very huge amount difference. so canceled that invoice through MR8M, then the forex amount is not totally reversed, it split into forex some part and to ppv some part...
          1) Could any one explains how it was not totally reversed to forex,
          2) How to reverse the Invoice with full forex?
          3) Can I re-reverse the canceled Invoice?

    You cannot  re reverse the cancelled invoice. You have to do MIRO again. Check the settings in SPRO in transaction OMRW-Configure how exchange rate differences are Treated. One possible cause for the foreign exchange difference not being posted on reversal could be that the settings for treatment of foreign exchange differences here have changed.
    Thanks and regards
    Kedar

  • How to Delete/Reverse/ cancel PS  Budget  Document

    Hi Gurus
    I need to  Delete/Reverse/ cancel PS  Budget  Document created through cj34. Kindly respond me immediately.

    Hi,
    We can return the budget in the project via CJ38
    Enter the necessary data and choose Return. The Change Return: WBS Element Overview screen appears.
    Enter the corresponding data.
    Note: Only the WBS elements where the Budget Return business transaction is allowed are ready for input.
    To select the timeframe for which you want to enter a return, choose Annual values -> Previous or Next.
    Enter the returns and choose Continue. And Save the returns.
    Also you can return the budget from the project using CJ35.

  • HT4528 i DOWNLOADED AND SUBSCRIPBED TO Zoosk on my phone. I now want to cancel it aqnd Zoosk says I have to cancel through ITunes before I can deactivate. How can I do this?

    How do I cancel the subscription for Zoosk through ITunes? I am trying to deactivate my account through Zoosk but it will not let me until I cancel the subscription with Itunes.

    The link tells me how to turn off auto-renew.  I did that over 2 weeks ago and still cannot cancel Zoosk account.  I've written and called Zoosk and they keep telling me I have to cancel through iTunes since that is how I subscribed.  So, how do I cancel Zoosk?  I want to get my profile off the site and it seems I am stuck in a virtual loop!  Thanks.

  • How To delete Service Entry Sheet

    Dear Experts
    How to Delete the Service Entry Sheet , or cancellation ,there is no Material Document generated for that entry.
    Actually we have making the Service Entry through ML81n but system does't make Document Nos, directly Entry sheet nos is there.
    Rgds
    Pankaj Agarwal

    Hi Pankaj,
    Enter t-code ML81N.
    Enter your service entry sheet number.
    Than click on change button of header level.
    Than click on Revoke acceptance.
    and click on save button.
    After click on save button. Second time click on change button.
    So system display you deletion flag indicator like dust bin.
    Than set it(click on deletion flag button) and click on save button.
    Regards,
    Nani.

  • Service entry reversal is there?

    Hi,
    Is there any service entry reversal?,how can we do it?
    Thanks

    Hi,
    Yes,
    Use  T.Code: ML81N, Click on other purchase order. Enter the Entry sheet/Purchase order number you want to cancel. Then the details will be copied, then click on change and then click on revoke acceptance icon.
    In this way you will revoke the SES. If you want to delete the SES, after revoking SES click on Delete icon, So that the SES will get deleted.
    Regards,
    Biju K

  • Error while calling a web service in web dynpro through XI

    Hello,
    I was following a blog for Invoking Webservices using SAP XI
    /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
    I have done all the steps specified but when I import the wsdl file in web dynpro application and deploy the project I get the following error:
    <b>"Exception on execution of web service with WSDL URL 'bankws_OUT_MI.wsdl' with operation 'bankws_OUT_MI' in interface 'bankws_OUT_MI'"</b>
    where:
    bankws_OUT_MI -
    is the message interface name.
    I have defined a web service in the integration reopsitory as follows:
    <b>http://PEP:50000/XISOAPAdapter/MessageServlet?channel=:bankws:s_comm</b>
    where 
    bankws --- service name
    s_comm -
    sender communication channel
    selected 'bankws_OUT_MI' message interface from the given choices
    'bankws_IN_MI'  or 'bankws_OUT_MI'.
    interface name: bankws_OUT_MI -
    mesage interface name
    Can anyone guide me how to proceed further. Also if possible can anyone send me some helpful documentation regarding how to call a web service in web dynpro through XI.
    Thanks in advance.
    Regards,
    Imtool

    hello everyone,
    I made the whole scenario again and it is running succusfully in Xml spy. Now when i call the webservice in web dynpro...  I get the following error:
    <b>com.sap.engine.services.webservices.espbase.discovery.BaseIOException: Invalid Response Code 200 while accessing URL: http://PEP:50000/XISOAPAdapter/MessageServlet?channel=:OOMS_WS_OUT:CC_OOMS_WS_OUT. Response Message: OK. Content Type: text/html; charset=utf8. Body Content: <html> <head><title>MessageServlet</title></head> <body> <h3>Message Servlet is in Status OK</h3> <h3>Status information:</h3> Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/645_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#7 $) bound to /MessageServlet <br/>Classname ModuleProcessor: null <br/>Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean <br/>Lookupname for remoteModuleProcessorLookupName: null <br/>ModuleProcessorClass not instantiated <br/>ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0 <br/>ModuleProcessorRemote not instantiated </body></html></b>
    I have also made the entry in the visual administrator for metadata_dest and execution_dest.
    Does anybody have an idea what mistake i am doing.
    Thanks,
    Imtool

  • How can I be reimbursed and cancel my old account?

    I wanted to cancel my old membership this afternoon, but I quickly realized that money was automatically taken out of my account in the morning. Shortly after I had paid for a membership, my school, Parsons The New School of Design, allowed students to access the Cloud for free. So I have had two accounts over the past year. So, how can I be reimbursed and cancel my old account?

    You will have to contact Adobe Support thru chat (or by telephone) to work out matters of cancellation and reimbursement.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • My phone was stolen and I discontinued cell service to the phone through my provider. Before discontinuing service, I locked my phone from the icloud. Now that it is no longer being serviced by the service provider, will it remain locked?

    My phone was stolen and I discontinued cell service to the phone through my provider. However, before discontinuing service, I locked my phone from the icloud. Now that it is no longer being serviced by the service provider, will the phone remain locked?

    Thanks, James. Sadly, I had not upgraded to iOS 7 as I only had an iphone 4 and those I knew with the 4 who upgraded had major issues with battery life, so I decided not to upgrade. However, I know the phone was locked because the new "owner" called and hung up on me while calling the number I listed in the "This phone is stolen message" set by the cloud. Are you saying that my phone will remain locked if they don't know how to break into it? Or are you saying that it will no longer stay locked once I turned off service to the phone?

  • Payment document which gets reversed/cancelled.

    Hello to all,
    Table REGUP gives the payment doc no. with the line items. But what if the payment is reversed/cancelled. Even then the table is showing that document. I am outputting all the payment docs with respective line items(on which WHT is deducted). If the payment doc is reversed , so i dont want to show that document ? How to use REGUP for not showing the reversal documents.
    Thanks
    Shehryar Dahar

    Hi,
    You can use the Field REGUP-BSCHL (posting Key) to differentiate the Reversal/Cancelled document.
    other useful fields may be doc type(BLART), Account Type (KOART) and the Credit/Debit Indicator (SHKZG).
    reward if useful
    regards,
    ANJI

  • How to Close Service Purchase Orders

    Dear All,
    Please guide me how to close Service Purchase order if the part services are pending and Net value is not completed or no service entry done.
    But still we need to close the purchase order.
    Is there any manual provision in Service Entry Sheet or Purchase order ?
    Please help.
    Shailesh Panchal

    Hi,
    Activate Delivery Complete Indicator on Service Purchase Orders through configuration.
    SPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level-PT9F-Define Screen Layout at Document Level-Optional
    Now check all the service purchase orders for which you want to close.
    Hope this will help you.
    BR,
    Patil

  • How to set Service render date should be equal to Billing date

    Hi All,
    At present when invoice is created the service rendered date (FBUDA) is taken as the basis for the Rebate condition types to select the condition value from the agreement.
    The business requires that for the rebate conditions, service rendered date should be equivalent to the billing date, so that correct agreement is selected based on the billing date.
    Required Change: Service Rendered date should be equivalent to the Billing Date for only Rebate condition Types and only for particular Sales Org.
    To achieve this how can I proceed, I have gone through all user-exist for billing no where I have found
    Could you please guide me to achieve this functionality?
    Thanks and Regards,
    Jaya.G

    Hi Yadav,
    My requirement is to put the billing date in service render date
    I.e. in my scenario the Actual GI date is populating into billing date and also in service render date (komk-fbuda)
    If we enter billing date manually while creating the billing that should be reflect in service render date, in condition level.
    Here it is not happening, it is taking the Actual GI date in service render date,
    Here VBRP-FBUDA is different form komk-fbuda.
    Vbrp-fbuda is have to reflect form Actual GI date only
    My requirement is, I need to populate the billing date into service render date for some conditions only. These conditions are rebate type conditions.
    I can populate the billing date to all conditions not for particular conditions
    In user exit userexit_pricing_prepare_tkomk
    I can move the vbrk-fkdat to tkomk-fbuda
    But this not my requirement
    I need to populate the billing date to service render date to some conditions types only
    In this exit I canu2019t restrict the conditions, I mean in this routine I am not able to select the condition types
    Please advice me where can I write the code to achieve my functionality
    Thanks in Advance
    Jaya.G

  • How to create Service Monitor - best Way

    I have a task at hand : 
    Creating monitor to alert when a service is stopped.
    We are using SCOM 2012
    I checked and found various ways to do so http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
    My requirement is : there are like 100 such services on 100 different windows computers that i need to monitor.
    The services are not common , so 2 computers have the same service , Maybe some service that i need to be monitored be on 2 computers but overall every service is unique.
    What is my best option:
    1.Create a basic unit monitor and target to Windows computer class ? Create is as disabled ? Override for just the machine that has it.
    Will it clutter my Windows Server class health explorer . (How bad is that as per performance)
    2.Create a Service monitor using Windows Service templates 
    Do i have to create 100 target groups , as i have to Target the monitor to specific computer only
    Since template service monitor create discoveries , targets etc on its own  (Am i going to clutter SCOM with a lot of those) 100 
    3.Do i create a attribute for each service , so as to extend the windows base class to discover the computer that has specific service (Using registry)
    too much work is it and how good of an option is this.
    4.MP Authoring ,Create new class discovery based on WMI / Registry to find computer and then target the monitor 
    What would you do in such a case.

    An example is the windows service monitoring from the Windows Management Packs. Microsoft does not discover any of these services. The MPs discover the Windows 2003  \ 2008 \ 2012 Operating System Class and the basic service monitors are targetted at
    this class. This means it is relatively light weight monitoring (less overhead on the agent and less discovery information in the databases) but it does mean that you can't add any of these services to a distributed application or report on their availability.
    You don't report on individual monitors but on objects which may have many monitors targetted at them.
    Windows Server 2003
    ü 
    Computer Browser Service
    ü 
    DHCP Client Service
    ü 
    DNS Client Service
    ü 
    Plug and Play Service
    ü 
    RPC Service
    ü 
    Server Service
    ü 
    TCP \ IP NetBios Service
    ü 
    Windows Event Log Service
    ü 
    Workstation Service
    Windows Server 2008 (including R2)
    ü 
    Computer Browser Service
    ü 
    DHCP Client Service
    ü 
    DNS Client Service
    ü 
    Plug and Play Service
    ü 
    RPC Service
    ü 
    Server Service
    ü 
    TCP \ IP NetBios Service
    ü 
    Windows Event Log Service
    ü 
    Workstation Service
    Windows Server 2012
    ü 
    Computer Browser Service
    ü 
    DHCP Client Service
    ü 
    DNS Client Service
    ü 
    Plug and Play Service
    ü 
    RPC Service
    ü 
    Server Service
    ü 
    TCP \ IP NetBios Service
    ü 
    Windows Event Log Service
    ü 
    Workstation Service
    If you want to actually report on the availability of this windows service (or add it to a Distributed Application) then you do need to discover it - either via the Authoring Template or authoring your own discoveries.
    Only you can decide what you need and you might have a different need for each service depending on what it is doing.
    Jonathan Almquist has a good walk through here about how to change service monitoring to allow for consecutive occurrences of a service being unavailable but it is deep authoring. 
    http://blogs.technet.com/b/jonathanalmquist/archive/2011/06/24/windows-service-monitoring-reduce-false-alerts-part-2.aspx
    Regards Graham New System Center 2012 Blog! -
    http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • Service tax reverse mechanism

    Dear all,
    How to configure the Service tax reverse mechanism.
    Pls advise below how to configure below scenario
    Bill of Vendor -
    Service cost
           100,000.00
    Add. Service tax @12.36% of service cost
    12360
    Bill value
          112,360.00
    Vendor provide bill as amount show above
    So entry will be
    Expenses a/c
          112,360.00
    cenvet not taken
    Vendor a/c
         -106,180.00
    100% of Basis value + 50% of duty amount
    Service tax payable *
             -6,180.00
    As we have to pay 50 % of the service tax
    So 50% of [112360*12.36/(100+12.36) i.e. vendor bill amount*service tax rate/(100+service tax rate)]
    and venodr a/c is to be credited with Rs. 106,180 (112,360 - 6,180)

    Please refer the below not from SAP for solution.
    SAP Note 1736781
    Thanks

Maybe you are looking for