How to do setting of decimal notation and arithmatic and character note

Hi colleagues
I do have one problem
And the following setting tried in SAP netweaver so do not give any hint for Netweaver
The problem is stated as follows
in output type in Germany they use , instead of . the dot signifies point that is .
and we use , as a seperator in means suppose we have to write 2000 we write like wise means as per our requirement whether we need to mention 2.000 or 20.00 but in germany they use comma ,
so in output type display point the problems are increasing and they are not getting solved.
so it is the question of compatibility
what went wrong i am unable to understand
is there is any significance of country specific setting of decimal notation
or any thing need hint towards the same.

Hi
For your output type assign a smartform and in the smartfrom write the program that the decimals should come like , instead of . then your requirement can be fulfilled
Also check in OY04 wheather you can maintain or not
Regards
Srinath

Similar Messages

Global setting for decimal notation setting?

Experts:
Where can I set the decimal notation for all users? Is there a global default setting for this?
I need to display numbers as xxx,xxx,xxx.xx.
Each individual user can set this in their Maintain User Profile -->Default settings.
But I need to have the system default for EVERY user to xxx,xxx,xxx.xx.
Your assistance will be rewarded.
Thanks
Den

Hi,
Go to SU10 - Mass change. Enter all the User list and make the changes.
Hope it will help u.

How can I set my WebI filters to Null and not Null

Folks,
I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
How can I set my WebI filters to Null and not Null?
Regards,
Bashir Awan

Hi,
As you said you could do it at the report level and also at the universe level.
One more way is to create the filters in the universe levele and add them in thequery filter.
Ex: in the filter you need to write :
Column1 is null and and column 2 is not null etc.
Hope this will help.
If this did't solve your problem then please explain it in detail.
Cheers,
Ravichandra K

How do I set up a new Apple ID and iTunes account for my daughter, but let her keep the current content of my iTunes account?

How do I set up a new Apple ID and iTunes account for my daughter's MacBook, but let her keep the current content of my iTunes account? (We currently share the same Apple ID and iTunes account). Hope someone can help... Thanks

Discussions on using purchases from multiple AppleIDs in one iTunes library - https://discussions.apple.com/message/19543804
As I mentioned earlier, the main time when this becomes an issue is if you need to do something involving associating a computer with a particular AppleID. Careful management of your collection should minimize this situation.
iTunes Store: Associating a device or computer to your Apple ID - http://support.apple.com/kb/HT4627 - In connection with, "When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID." "Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days." - Additionally instructions for "Removing an associated device or computer from an Apple ID"
So the first account is really "yours" and you are setting her up with her own account? It helps to know this because if both are "hers" then there isn't an issue with her having full access to both accounts. If in 10 years she moves 2000 miles away and she is pretty much independent then you may not want her to have full access to your AppleID just so she can authorize a device.

HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Go to Settings>iCloud and sign in with your Apple ID to create the account. Then turn on the data you wish to sync with iCloud. See http://www.apple.com/icloud/setup/ios.html.

HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

How do I set apps on ipad to use UK store not USA?

How do I set apps on ipad to use UK store not USA? Somehow i've changed setting to use USA store and can't switch back to UK.

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".

How can I set up my contacts so that I do not see all of them on ipad from iCloud?

How can I set up my contacts so that I do not see all of them on ipad from iCloud? I don't need/want to view contact info for casual contacts on the ipad. (I.e. contacts entered so that I can identify a caller for ID/screening purposes)
Also would like to limit email contacts from yahoo- no need to view emails for every "safe list" address.
Thanks!

Keyboard shortcut for FullScreen is command + control + F
For more on this:
http://support.apple.com/kb/PH11941

How do you set the decimal precision of a float?

Hello,
I am new to Java and have run into a problem. I am trying to truncate an array of floats and save them to a file. I want to save two decimal places with 0's ie: 0 as 0.00
For example:
I have a number 0.9772128 and I want to convert it and store it as 0.98, the following code seems to truncate it but there is a problem.
float d = output_Weights;
d = Math.round(d * 100) / 100.0;
some of my numbers come out as .1 instead of .10 and I can't seem to figure out how to add the 0's on the end of them.
Does anyone have any suggestions or a better way of getting the two decimal precision?
Thanks in advance for any help you might be able to offer.

And if you want to set the decimal precision when you convert the floating point number to text (which is what you are talking about when you say it ends with .1 instead of .10), you use a DecimalFormat object to do that.
(By the way, isn't there supposed to be an apostrophe in Arc'teryx?)

Setting Default Decimal Notation with ISA User Admin

Hello all,
I have been trying to find out how I can select a default decimal notation when creating users via ISA User Admin. My client wishes the default notation to be 1,234,567.89.
In advance, many thanks
Jon

Gun
Thanks for your response.
The problem is that customers will be creating their own users via Web Based User Management. Currently the only way we can amend the decimal notation is via SU01. This, then, would have to happen for every user because the default notation is not the one we require. My question is - is there a way of setting the default decimal notation for each user so we do not need to manually amend each user in SU01.
Thanks,
Jon

How do I set my peak limiter to -3db and fix audio spikes?

I'm new to Logic X (new to Logic period, actually), and I'm trying to cut audio for Audible. They've given me the guidelines and I thought I was following them, but I guess whatever I did didn't work.
They're saying the audio still has peaks over -3db (reaching 0db at some points) and that the limiter isn't functioning. How can I set the plug ins so that I can take care of this problem? Sorry, I know this is probably incredbily basic, but I have absolutely no training in this. Thanks!

Are you are using an audio interface?
Are you recording external instruments... you will need to explain what kind of audio, virtual instruments, loops, recorded audio through an interface?
If you're recording through an audio interface (or the computer's audio input) Logic's plugins cannot stop peaks as Software is -after- the the hardware input. If you're getting peaks recording through hardware you will need to bring down input levels.

How do I set a default page size, orientation, and printer for a particular document in Pages?

I have a simple label document in Pages which I print to my label printer. The label is 1.49 x 3.47 inches and needs to print in Landscape, and it needs to print to my Dymo label printer. How do I set up the Page Setup or Print Setup so it defaults to this document size, orientation, and printer, every time, without me having to manually enter those settings every time?

Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

How do i set an appointment into my iphone and get a warning sign for the appointment to date into my agenda ?

Since IOS5.1 , I been having a hard time getting my agenda to show my appointments and give me a warning sign like alarm or a reminder alarm for them .
Now since the new update we have had one app split into two and gotten reminder and agenda .
Now i have been using o r better said been trying to use the reminder , to get my appointments set right .
But it seems to be that i do not get a warning of any type from my phone about the coming date , i set up the reminder for in the first place .
Before ios5.1 the reminder was intergrated into the agenda and for more easy to use since the new .
Now the agenda has no more option to also add birthdays and other handy reminders which are on a yearly bases .
I have been trying to find out if i missed something or other , and come to the conclusion that i see no options aviable to either enable or disable anything of the sort to change this .
Also i have been reading the manual and i notest that in there is no reminder of how this new stationary app from apple itself works and explained .
Anyone can enlighten me about this please , thank before hand and greetings from verbodentoegang

So I have bought a couple of apps on my iphone and would like to transfer them to my itunes library, but not sure how.
iTunes > File > Transfer purchases
When I plug in my iphone and try and sync the two, I get a warning from itunes that everything on my iphone will be wiped and everything from my itunes library will be moved to it.
Have you changed the computer you are syncing with?

How do I set up my old G3 PBs and a Sawtooth?

My Wallstreet 233 had sat on my shelf for the last 5 years after I had thought that the Power Manager had burned due to a faulty adapter output. I recently got an old 266 which had an original apple mains adapter, and lo and behold the old PB came alive. After 5 years gathering dust, I've now 2 working Wallstreets with one working ac adapter and, after a quick battery reset, 2 batteries with 3 hours charge each.
Then, a week later I was given a 500mhz Sawtooth. So now I have 2PBs and a PMac.
I've got them up and running on 10.2.8
What will the best way of setting up these at home? I want to use the 266PB for internet (browsing, blogging, skype, itunes and limewire), I'm happy to use PB233 for ms office and as disk backup that may boot up other PB. I want to update PMac for video editing, graphics and playing movies. I have Maxtor to backup PMac.
Can I boot up one pb using another pb's hdd? Is SCSI the only way to do this?
I also want to network all these machines, preferably wlan. What's simplest way of doing this?
BTW I have a LaCie USB2/FW Combo PC card which has a 12V power socket, sadly I don't have power switcher. There's no record of it on LaCie's site and it's CD only mentions Orange Micro which has proved futile. When inserted into PC Card slot it appears on menu bar - "vendor unknown" and "host controller" greyed out and eject disk in bold. When I connect disgo usb it flashes but doesn't mount. I've checked on disk utility and it shows disk not mounted, but apple profiler doesn't show anything different. Is this correct?
PB G3 266MHz 512mb 20G, PB G3 233Mhz 128mb 10Gb, & PMac 500Mhz 512mb 120Gb Mac OS X (10.2.x)

Full excerpt (it's long sorry) of Installation guide on LaCie CD for Combo USB/FW PC Card reads:
Installing USB Drivers
USB 2.0 Hi-Speed support is available on MAC OS X. When running on the OS X system, USB
2.0 Hi-Speed will have a data transfer rate of 480 Mbits/s. When running on the OS 8.6 and OS 9
USB will have data transfer rate of up to 12 Mbits/s.
Users can connect USB and USB 2.0 Hi-Speed peripherals to a USB 2.0 Hi-Speed port. The
current USB peripherals will continue to have a data transfer rate of 12 Mbits/s while USB 2.0 Hi-
Speed peripherals will have a data transfer rate of 480 Mbits/s if Mac OS X is currently running.
NOTE: Mac OS 9.1 and Mac OS X come with USB 1.1 support preinstalled and it is not
necessary to download and install Apple USB drivers.
Mac OS X users
After the USB 2.0 card is installed, log into Mac OS X with a username and password that has
administrative access.
Download the OrangeUSBInstaller from: (http://www.orangemicro.com/updateusb2mac.html)
• Double click on OrangeUSBInstaller.pkg icon
• If the installer displays the message “Administrative access is required to
continue”, click on the Lock icon.
• You will then be prompted to enter the administrator password. If the account
you are using does not have administrative access, you must enter the username
and password for an account that does or you will NOT be able to install
OrangeUSB EHCI support!
• If you have administrative access, the
“Welcome to the OrangeUSB Drivers
Installer” window will appear. Click on the
Continue button.
• The “Select a Destination” dialog (Fig. 2)
will appear. Select the active Mac OS X
system drive, then click “Continue”.
Figure 1
• The “Easy Install” dialog will appear. Click
on the “Install” button to install OrangeUSB
Drivers.
• Click on the ”Restart” button to finish the
installation, when prompted.
Figure 2
Finalizing USB 2.0 Hi-Speed hardware settings
USB 2.0 Hi-Speed products that use an NEC chipset have 3 USB host controller engines on
board. Two of the host controller engines handle USB 1.1 transactions. One of the host
controllers engines handle, USB 2.0 transactions.
USB data traffic is automatically routed to the proper host controller engine depending on the
speed of the device that is plugged into the USB port. This essentially creates 3 concurrent USB
buses. These USB buses allow devices to run in a less congested traffic environment. This helps
devices such as color printers, scanners, video cameras and mass storage devices, which
require a high bandwidth, to work well together.
The NEC PCI to USB Enhanced Host Controller driver handles USB 2.0 Hi-Speed (480 Mbits/s)
traffic. The two NEC PCI to USB Open Host Controllers handle Full-Speed (12 Mb/s) and Low-
Speed (1.5 Mb/s) traffic.
Confirm proper installation of USB 2.0 Hi-Speed driver:
Verify the “OMI_EHCI.kext” Extension is located in the Mac OS X /System/Library/Extensions/
directory.
Verify the USB 2.0 Host Controller is detected:
Open the Apple System Profiler located in the Mac OS X /Applications/Utilities folder. Then click
on the “Devices and Volumes” tab.
In the example below slot B1 contains two “pci12ee, 7000” entries and one “pci12ee, 7001” entry.
The “pci12ee, 7000” represents the two NEC PCI to USB Open Host Controllers and the
“pci12ee, 7001” represents the one NEC PCI to USB Enhanced Host Controller.
If all three appear, the USB 2.0 Host Controller has been detected.
Congratulations! Your Macintosh is now ready to use your FireWire and USB devices. To install
a specific FireWire or USB device, please consult your device manufacturer’s documentation.
Troubleshooting USB
Problem:
I plug in a USB device and the Mac OS X system freezes.
Solution:
On beige G3 Macintosh computers, Mac OS X may attempt to load the built-in USB OHCI drivers
for the EHCI controller. Orange Micro has worked out a patch to solve this problem. It is located
on the OrangeUSB Installer CD in the G3 USB 2.0 Patch folder.
Problem:
I have a pre-G3 Power Macintosh computer, an OrangeUSB and the USB drivers seem to be
installed properly but I cannot get any devices to work. Why?
Solution:
The OrangeUSB PCI board is compatible with the Macintosh All-in-one G3, Power Macintosh
Beige G3 rev. B or later, Power Macintosh Blue & White G3, and Power Macintosh G4 series
computers. There is an incompatibility between the OrangeUSB 2.0 PCI board and all other PCI
based Macintosh computers. The OrangeLink+ USB 2.0/FireWire PCI board does function in pre-
G3 Power Macs so you may consider using it in place of the OrangeUSB 2.0 card.
Problem:
How can I tell if my Power Macintosh Beige G3 is rev. B or later?
Use the Apple System Profiler, located in the Apple menu, to help determine which logic board
revision you have. Open Apple System Profiler, click the System Profile tab within the window,
and then look at the Production Information section. Compare it to the table below to determine
which revision of the logic board is in your Power Macintosh G3 (platinum) computer.
ROM Logic Board
Versions Revision
$77D.40F2 revision A
$77D.45F1 revision B
$77D.45F2 revision C.
Problem:
What PCI based Power Macintosh Computers are NOT compatible with the OrangeUSB PCI
board?
Solution:
Power Macintosh 54xx, 55xx, 64xx, 65xx, 72xx, 73xx, 7500, 85xx, 86xx, 95xx, 96xx, Twentieth
Anniversary Macintosh, Power Macintosh G3 Beige rev A and all Macintosh clones.
Where to go for additional Troubleshooting assistance?
Visit the OrangeUSB Windows troubleshooting web site.
http://www.orangemicro.com/orangeusbmacfaqs.html
Contact Orange Micro for technical support.
http://www.orangemicro.com/supportform.html
Now it is probably clear that LaCie pc card is NEC chipset based on clone of orangemicro. Now I have googled the OMI_EHCI driver and found that it is fine up to and including 10.2.6 but 10.2.8 may behave strangely. I guess it must not be liked by native apple usb driver.
http://www.macally.com/techsupport/faq/faq_usb2controller.html
Have you any suggestions?
PB G3 266MHz 512mb 20G, PB G3 233Mhz 128mb 10Gb, & PMac 500Mhz 512mb 120Gb Mac OS X (10.2.x)

How to do setting of decimal notation and arithmatic and character note

Similar Messages

Maybe you are looking for