How to do the effects used in this video?

Hi,
I'm curious as to how to do these effects in this video:
Childish Gambino Type Beat - Inhale Ft. Drake - YouTube
Mainly I'm looking for the colors, but knowing how to do the scratches would be nice too.
Any information is greatly appreciated

Typical film damage effects. You can purchase footage to overlay or you can fake it with blurred shape layers and blend modes.
Scratches are also just film damage effects. There are a ton of tutorials and a bunch of stock film damage clips you can purchase.
http://www.shutterstock.com/video/search/film-damage-effect/
film damage effects
Not all tutorials on YouTube present good info so you'll have to sort out the good from bad by trying to guess which folks have some experience.

Similar Messages

What are the video effects used in this video

I was just wondering if anybody could help me. I was intrigued to find out what kind of video effect is used in this video at 0:16 - 0:18 and if theres a name for this type of video and editing used throughout the video such as the continous stream of different videos etc.

Do you mean the distorted lips or the bad tv reception.
The distorted lips can be anything from Bulge to Mesh Warp to Liquefy.
The bad TV reception can be started with the Bad TV Effects Presets that comes with AE. You can modify or edit these as you like.
I know of no specific style name that goes along with any part of this video other than lazy. It looks like nobody had an idea of what they wanted to do so they just shot a bunch of stuff and threw every effect they had in their bag of tricks at the project. Turn off the sound and it's impossible to tell what it is about. I don't mean to be critical but there's not much original here that I haven't seen a zillion times going back to the Video Toaster days. (probably before you were born). It's nothing more than a bunch of quick cuts and jitter.
Load up about 100 layers, trim them do different lengths from 5 to 30 frames, Select half of them, apply Bad TV1 to that bunch, Apply Bad TV2 to the another 10 random layers. Add tint, bulge, to a few more. set a couple of position and rotate keyframes to a few more then add wiggle to those, then use the Keyframe Assistant to sequence the layers and you'll be pretty close. It should take you about 15 minutes.
If you've got a specific question about how they made this jitter or how they made time stutter ask away. If used to tell a story these techniques are all useful. If you just want to create a jarring montage then follow my suggestion in the previous paragraph then run Brainstorm a couple of times.

Need information about the transition used in this video.

Hi,
I try to make a video about a game (a fragmovie).
I have see a video with very nice transition. I want try to do same but i don't know how.
If somemone have tuto, links, tips or whatever for help me, thanks you.
The video : http://www.youtube.com/watch?feature=player_embedded&v=unWCV9aWWrc
I want do same transitions as 00:14 or 00:27sec.
Thanks.

I'd take your two clips and set them up with a simple dissolve transition between the two using opacity with the blend mode set to alpha add. Next drop the comp with the dissolve transition into a new comp or select both layers and pre-compose. Now apply Effect>Stylize>Motion Tile and animate the tile center to complete the transition.
EZ as pie.
Strike that, easier than pie.

Can anyone name the app used in this video?

What app is being used here?
http://www.youtube.com/watch?v=7ONsYf6GfMQ

I just downloaded it and I'm playing with it on my iPod touch now. It has a mode where you can touch the screen and it doesn't effect anything. Love it!
You can also change the colors of the lines and the background separately - really cool!
Now I have to get my i931x and make my own video, lol
Thanks.

Any idea how they do the corridor part on this video?

at 37 seconds in, they go down a corridor. Any ideas on specific tools they use or things that i should play with to do?

Here's the corridor... just skip the vines.
Video Copilot
61. Growing 3D Vines
Or, here:
27. 3D Room

How to create the same title effects as in this video?

How do I create the same title effects as in this video?
By titles I mean the ones that say Exterior Front, Exterior Back, Foyer, etc...
http://www.youtube.com/watch?v=TEKcasQAuaY
I don't know how to have the black bar slide in, then have the word slide in, then have both slide out.
I'm totally new at Premiere.

It didn't appear that the words were sliding in. Rather, they were being wiped on.
Information on using the Titler is here.
Since you're new to Premiere Pro, you should begin at the beginning and work through the basic learning materials for Premiere Pro.

Somebody knows what effect was used in this video on the text?

somebody knows what effect was used in this video on the text?
im talking about this "extreme drop shadow" he was using please help me i must have it for a project.
thanks to anyone who can help me.
Crown the Empire - Initiation - YouTube

Search Google for "After Effects long shadow" or "After Effects Retro Shadow".
Or spend a few dollars and buy this:
http://videohive.net/item/the-ultimate-long-shadow-toolkit/6657312?ref=amigoproductions

How to fetch what are all the tables used in this TR no and Package name of

Hi Friends,
I have input of Transport Request no (E070-TRKORR).
How to fetch what are all the tables used in this TR no and Package name of this Table.

HI,
FYI
SELECT E071OBJECT_NAME, E070MDEVCLASS
FROM E071, E070M
WHERE TRKORR = YOU REQUEST NO.

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces?

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....

Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled.

How to find the records using contains with the word like this 'some text-some text'?

Hi,
How to find the records using the full text contains keyword and that column contains ‘some text-some text’
In the above some text can be anything.
Does anybody know please let me know.
Thanks,

Hello,
You can try to create a Full Text Index on the table and use CONTAINS() to get the record which contains the specify words.
For example:
SELECT * FROM TABLE WHERE CONTAINS(column_name, 'some text')
Reference:
Full-Text Search (SQL Server)
Creating Full Text Catalog and Full Text Search
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

What effects were used in this video?

Hello!
Is anybody able to tell what sort of effects / filters were used in this video - or how to achieve something similar?
http://vimeo.com/23655494
Thanks!

Anyone read the comments? Might be easier to direct questions to the creator but I don't understadn the language they're using: dope, fly, sick, flarp. Adjectives from Hitchhikers Guide?
bogiesan

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

How to get the workcentres used in the routing out of 2 alternate routings

Dear All,
I would like to know how to get the workcentres used in the routing out of 2 alternate routings.
I referred PLKO got the Task List Type (PLNTY), Group(PLNNR), Group Counter(PLNAL), Plant(werks).
I passed this in to PLPO, The problem in PLPO is we dont have the distinguishing field Group Counter(PLNAL), so I am getting all the ARBID including both alternates.
How to get the ARBID with respect to Groupcounter 1 alone.
If a get the ARBID , I can get the ARBPL from CRHD.

HI,
Use PLAS Table also. you have to use PLKO> PLAS> PLPO.
Pass PLNNR & PLNAL in PLAS and get PLNNR & PLNKN.
Then pass these into PLPO.
work centers from CRHD
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 31, 2008 12:28 PM

How to add the Assignment column on this post outgoing payment in f-53

Hi all,
how to add the Assignment column on this post outgoing payment in f-53?
thanks.
Joo

Hi ,
If you want to see the assignment column in f-53 process open item screen
1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
then check in F-53.
Hopw it will solve your problem.
Assign points if useful
Regards
Prabhat

How to do the effects used in this video?

Similar Messages

Maybe you are looking for