How to do the hard recovery for exchange 2010 (No Restore.env generated)

enrollment:Windows server 2008 R2, exchange 2010.
I want to test the fundamentally of eseutil /cc
so I backup the exchange database by Using the Windows backup, then I restore the database, and no Restore.env be found.But I found I can run the
eseutil /r.
what's happened?
1,why No Restore.env generated for exchange 2010 in Windows server 2008 r2?
2,why I can do the soft recovery after the restoring the database?
3, how to do the hard recovery for this situation(No Restore.env )?
Please click the Mark as Answer button if a post solves your problem!

Hi Eric,
From your description, I would like to clarify the following things:
1. Before performing the restore process, we need to dismount the Exchange databases that we want to restore. If the database is still mounted, the restore process will fail. If the restore process doesn't succeed, Restore.env won't be generated.
2. It is because the log files are healthy, you can run Eseutil/r and perform soft recovery.
3. In your case, you can continue to perform the soft recovery.
For more information about hard recovery and soft recovery, here are some helpful threads for your reference.
Exchange Server Soft and Hard Recovery
http://technet.microsoft.com/en-us/library/aa996168(v=exchg.65).aspx
Exchange Database Recovery – Using eseutil commands (Note: It isn't from Microsoft, please pay attention to refer to it.)
http://msexchangeguru.com/2009/07/12/exchange-database-recovery-using-eseutil-commands/
Hope it helps.
If there any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support
" If the restore process doesn't succeed, Restore.env won't be generated. "
thank you for you reply.The restore process succeed,otherwise I can't do the soft recovery after the restoring the database,but can't see the restore.env
Please click the Mark as Answer button if a post solves your problem!

Similar Messages

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

Disater Recovery for exchange 2010 plan in Cloud computing

Hi
We are using exchange 2010 for our messaging solutions. Please find below our current setup.
mainsite: MBX Server --- 1no --> Hyper V host
                Hub&Cas ----- 1No --> Hyper V Host
                Edge ---- 1NO --> Physical
DR site : MBX,Hub&CAS -- 1No --> Physical
               Edge   --- 1no --> physical
we enabled the DAG for our Mail box server and its replicating through a point to point link between our main site with DR site.
Now we are interested to enable   our DR (disaster recovery) in MS cloud. Please let me know the process to go further .
how will the DAG or DB replicate to DR Site in cloud?. how its works?
much appreciated if any body have this setup .
Best Regards
Jagadeesan.S
O
Jags

Hello,
Kindly find the 3 types of plan for Exchange 2010 DR site. You can check all 3 plans and select as per your requirement.
1. Rebuild an Entire Database Availability Group plan
http://technet.microsoft.com/en-us/library/gg513521.aspx
2. Site Resiliency in Exchange 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/planning-deploying-testing-exchange-2010-site-resilient-solution-sized-medium-organization-part1.html
3. Exchange 2010 Cross Site DAG Disaster Recovery: Data Center/AD Site failure Part 1
http://msexchangeguru.com/2012/10/25/exchange-2010-dag-dr/
Deepak Kotian. MCP, MCTS, MCITP Exchange 2010 Ent. Administrator

Mails blocked in queue the moment forefront for exchange 2010 started

Hi,
We have newly installed Forfront protection 2010 for Exchange 2010 installed in our exchange 2010 Edge Server.
Mails got struck in the Queue immediatly after the forefront installations.
Mailflow works properly one we unhook the forefront from Exchange.
need to enable the forefront. Got struck in these. How to proceed up further.
Thanks,
Pradeep

Hi,
Please compare your configuration with the following blog or video. These might help.
http://araihan.wordpress.com/2010/03/15/forefront-protection-2010-how-to-install-and-configure-forefront-protection-2010-for-exchange-server-2010step-by-step/
http://www.youtube.com/watch?v=b2BgTmeXwUs
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Disater Recovery for exchange 2010 plan.

Hi All,
Happy New year 2014 ....
we have running with exchange 2010 R1 with DAG enabled. we have below mentioned setup in our exchange server.
Main site.
Active directory server ( Primary DC, additional DC in our main site) installed in Hyper V host. installed exchange 2010 mail box role in another Hyper V host. installed the CAS& Hub role in another virtual host and installed the Exchange
edge role in another physical server.
DR Site
Active director server( ADC) installed in Hyper V host. installed the Exchange 2010 mailbox,Hub,Cas server role in a physical server. installed the Edge Server in another physical server.
At present we have enabled the failover DAG for both our Mail box servers and its working perfectly when the primay mail box server down. we have run some commands to transfer all my exchange 2010 to point through our DR Site. so its take
some of the minutes of down time happened in our mail flow. we are planning to avoid that downtime. we are find for the solutions like if the primary site down the DR will need to automatically up. it will be appreciate that any
one provide your suggestion to achieve this without affecting the our current setup.
Jags

Hello,
Kindly find the 3 types of plan for Exchange 2010 DR site. You can check all 3 plans and select as per your requirement.
1. Rebuild an Entire Database Availability Group plan
http://technet.microsoft.com/en-us/library/gg513521.aspx
2. Site Resiliency in Exchange 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/planning-deploying-testing-exchange-2010-site-resilient-solution-sized-medium-organization-part1.html
3. Exchange 2010 Cross Site DAG Disaster Recovery: Data Center/AD Site failure Part 1
http://msexchangeguru.com/2012/10/25/exchange-2010-dag-dr/
Deepak Kotian. MCP, MCTS, MCITP Exchange 2010 Ent. Administrator

I tried every single procedure to get my iPhone 5 turn on but none would work including the hard restart (for over 2 minutes, that's how much I'm desperate), connecting it to itunes, connecting it to a dock, everything! ANYTHING ELSE I CAN DO?

I tried every single procedure to get my iPhone 5 turn on but none would work including the hard restart (for over 2 minutes, that's how much I'm desperate), connecting it to itunes, connecting it to a dock, everything! ANYTHING ELSE I CAN DO?

If nothing else is working you can try to put it into recovery mode and restore it that way. Plug in you cable to your computer and make sure your phone is off...hold the home button while you plug the cable into your phone, continue holding the button until a logo pops up showing itunes and cord going towards it, then you can let go of your home button and itunes will prompt you that it detects a phone in recovery mode and make you restore it

On my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.

How to set default website for exchange 2010

I'm unable to launch the Exchange Management Console, and then I read that it's necessary to set the default web site in a particular way, in order for Exchange 2010 Management Console to work:
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/4d396628-3867-4c95-9541-e0eb021e0135
However, after setting up Sharepoint, I see that it has modified the default website, and I'd like to ask for specific settings on how the default web site bindings should look (for exchange). Could someone please advise what I need to do to correct it?
I'm having trouble interpreting what Mike Crowley recommends in the linked post above, in terms of actual steps to the site binding information (which won't mess up what exists).
Currently it says:
Type           port         ip address        binding information
net.tcp
808:*
net.pipe
net.msmq                                         localhost
msmq.formatname                            localhost
http            80             127.0.0.1
https          443            *
http           80              *
https          443            127.0.0.1
It seems the line for http on port 80 is *, which I guess is equivalent to 'all unassigned'. Is the previous http port 80 binding to 127.0.0.1 causing the problem?
But I'm also supposed to set a Powershell VDir in IIS. Can someone provide steps for that?

Regarding SharePoint on Exchange:
It was not allowed earlier, as documented here:
http://office.microsoft.com/en-us/sharepoint-portal-server-it/coexistence-and-interoperability-guide-for-sharepoint-products-and-technologies-HA001160777.aspx & here:
http://support.microsoft.com/kb/825505 but there doesn't seem to be anything more recent than this. I would work under the assumption it is not supported outside of
SBS 2011 (which I am not very familiar
with).
Mike Crowley
Check out My Blog!

How to wipe the hard drive on a screen-dead Powerbook G3?

The display on my 1998 G3 Wallstreet Powerbook recently went black and the computer made a noise that I understand is called The Chimes of Death, although the hard drive still makes whirring noises. My local and trustworthy Apple repair service assures me the Powerbook wouldn't be worth repairing even if they could get the parts for such an old machine.
Is there a way to wipe the hard drive and make my data irretrievable before disposing of the computer?
If there's no way to wipe the hard drive, I'd like to find out: (1) How to remove the hard drive. (2) The best way to destroy the hard drive or at least make it forever unreadable (can my shredder eat it?). (3) The correct way to dispose of a Powerbook that has heard the Chimes of Death. (From what the repair service says, I assume nobody would want it as a donation.)

Turtlewiz,
I would not be so quick to pronounce it dead:
http://docs.info.apple.com/article.html?artnum=14438
I would try the suggestions in the above article. Will it boot to a CD?
As far as wiping the drive, it is easy as long as you can see a display so you can follow the steps necessary. You just open Drive Setup in the Utilities Folder on the CD > select 'zero all data' in the Initialization Options; do it a few times if concerned.
Removing the HD is relatively easy: Just lift off the keyboard and the heat sink, then remove the HD.
http://www.ifixit.com/Guide/3.0.0.html
Hit the HD a few times with a hammer and nobody will bother with it...it has a glass platter.
Nothing to offer on the recycling except Good Will may still take it as "non-working" since there are Mac users looking for such bargains.

Forefront for exchange 2010 - how long?

Hi there.
Read this article: http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx
I would have additional question.
Our company is MS Gold Partner and we need to renew our yearly license every year around AUGUST.
We are thinking about changing our SPAM filter external gateway with exchange edge, but as we can see from that article, you Will be unable to renew it license after December 2015.
I know that Microsoft offers online Forefront protection but that is not option in our case because of data sensitivity.We need an answer how long we Will be able to get updates regarding forefront for exchange 2010 and be licensed ok?
I guess after 2015 december Forefront Exchange 2010 Will no longer recieve spam updates thru Windows update, right?
And also engines Will not be updated after that date?
Is this the correct view and understanding?
with best regards
bostjanc

Hi Bostjanc,
>>how long we Will be able to get updates regarding forefront for exchange 2010 and be licensed ok?
I think you must have seen the information below in that blog.
For current customers, Microsoft will continue to support the subscription through Dec.31, 2015. If customer subcriptions expire before Dec.31, 2015, and annot be renewed because the product is no longer offered, these products will continue to be supported
through that date in order to provided with customers sufficient time to move to alternative solutions.
You could also check the following blog.
License extension for End-of-Life Antigen/Forefront products
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If the information above still cannot resolve your questions, please contact Microsoft to get definitive answers.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I set up Mail for Exchange on my N97 mini?

How do I set up Mail for Exchange on my N97 mini? I want to read my work email from outlook to my mobile.

You can download mail for exchange to a pc or laptop then use nokia pc suite to install it.
The bug still exists were your email will be show up as being sent from Mail For Exchange and not you name
Anyone know a way around that?

How to test if Spam protection with Forefront for Exchange 2010 works

Hi there.
Installed forefront for exchange 2010 on Exchange Edge server.
We have tested virus protection with creating EICAR, but the question is, is there a way to check if SPAM Works fine, and how to?
with best regards
bostjanc

Hi bostjanc,
Since this is an issue on the Forefront side, I suggest ask Forefront Forum for help so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FOPE
However, based on my knowledge, use the EICAR antivirus test file is the only built-in method to check whether the Anti-Spam configured correctly.
You can try to send some test spams to your Exchange server for testing, even if this is a stupid method : )
Thanks
Mavis Huang
TechNet Community Support

HT1222 How large is the up date for Mountain Lion?

How large is the up date for mountain lion for my mac in mega bites?

Here are the system requirements:
http://www.apple.com/osx/specs/
You need 8 GB of available hard drive space (plus another 10 GB or so to have empty and available at any time for the OS to operate properly). The installer itself is just over 4 GB (all the numbers are in Gigabytes, not megabytes).
And it is considered an upgrade (you need to pay for it) rather than an update (which would be free).

What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?

Quick question.
What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?
Hasan

Hi
Your question is a big vague. Extracting the rollup will use some space but you can delete the files afterwards.
Are you concerned about space while installing? If you have adequate space it shouldnt be a problem.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I am asking space after installation, it will definitely install some files so how much space extra space it needed in exchange directory drive.
Hasan

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

How to do the hard recovery for exchange 2010 (No Restore.env generated)

Similar Messages

Maybe you are looking for