How to do the new created field in User Attributes, show in Manager GTC

Hello Guys,
I have a Connector GTC working perfectly. Now I created a new field in User Attributes and I need make this field appear in "Modify Connector Configuration" of "Manage Generic Connector" without having to create a new Connector.
If I create a new Connector this field is showed normally, but this connector has a lot of mapping between the existing fields, I need only that a new field is displayed.
How to I do this?
Thanks

Not sure what version of OIM you are using but check Bug: 12812650
-Bikash

Similar Messages

  • How to get the New created Hier for existing IO and IS in the Infopackage

    hello Gurus,
    I have created a new Custom hierarchy on an existing InfoObject 0Costcenter. There are many Hierarchies already existing and being fed from R3. This new hierarchy is just a regrouping of costcenters.
    Now I have created this new Hier and activated it, When I tried to create a Infopackage to load this new Hier, I am not finding the new created Hierarchy in the Hierarchy Selection tab of Infopakage.What should I do to see this new HIer.
    Thanks
    Simmi

    so, the costcenter hierarchy created by the user is not a std costcenter hierarchy, so it should be a set hierarchy. go to tcode BW07 in r/3, give the name of the table and field, if you like the name of the datasource too orelse the system woudl generate it. But the costcenter hierarchy is compounded to controlling area, you would need to write a user exit to populate the compounding object too in the datasource, orelse all the costcenters would be unassigned to controlling area. once created, you can check the same in rsa6. once you see it there, replicate the DS to BI, and after that the data flow is same. create a new infopack to load the set hierarchy, as you wont be able to see this hierarchy in the std costcenter hierarchies.
    check a few other threads:
    Tcodes BW10/BW07 - how to use these
    compounding for hierarchies:
    ZXRSAU04 - programming for compounding in hierarchy

  • How to retrieve the value of field in user exit EXIT_SAPMF(in the include)

    Hello All,
    I am using user exit EXIT_SAPMF02K_001 for limiting the user to input the PAN number upto 10 character and first 4 character should be alphanumeric.I have done the logice and its running fine. The problem i am facing is that i could not get the screen input in the include where i have written the code ie. i am not able to get the screen field when the user exit is executed .In short i m not getting the value of the field ie(J_1IMOVEND-J_1IPANNO) in the code which i have written in the include.
    Can you pls tell me how do i get the value of the field PAN in the code . I have debug the program and it doesnot show any value.
    Reply ASAP.
    Thanks in Adv.
    Pravesh Deshbhratar

    Hi ,
    The Transaction code used is FK02.
    Secondly when i am using the debugger the i m getting into the INCLUDE Of the User Exit EXIT_SAPMF02K_001.
    So i dont think i am using incorrect user exit.
    what is required is field value in the include of EXIT_SAPMFO2K_001.
    Thanks
    Pravesh

  • How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

    Hi,
    We have a requirement to add  some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
    For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
    Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
    Thanks,
    Harry

    Hello Harry,
    Goto t.code SPRO ---> Display IMG --->  Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
    Use the above path and create the screen and assign it to the sequence using the below link as reference.
    **************** - Tips - Implementing screen exits for MM01/MM02/MM03
    Regards,
    Thanga

  • How to insert the new field to standard scheduling agreement script form.

    Hi Gurus,
    how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
    The below one is my requirement,
    ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
    Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified  
          document date (field EKPO-AEDAT).
    Thanks & Regards
    chinnu

    open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
    se71--->
    &<str. name>-AEDAT&

  • Issue with the new COPA field added into the BBSEG Structure

    Hello All,
    I have an issue with the new COPA field added into the BBSEG Structure.
    I think its added becuase of test Operationa Conern Created by somebody.
    Can you please let me know how to remove that structure from BBSEG Structure.
    Thanks
    vsr

    Hi Monohar & Ankur,
      Thanks for your answers..
      main issue is suddenly new field called RKE_COPA_KOSTL has  been added to the BBESG Structure..
      Because of this RFBIBL00 Upload is not working. I heard that  this new fields will come by generating Operating Concerns by Transaction KEA0.I found an operating concern which was created as a test in developemt system..
      But I am not sure how to delete that operating concern.Even i am not sure if we delete the Operating Concern ..is it going to delete that field in BBESG Structure or not??
    Please advise me..
    Thanks
    sathi

  • No information in the 'Date Created' field in Finder

    Hi
    I am on 10.4.11 OS and I am having a problem with Finder and the Date Created field. When I view my photos in files the 'date creation' field is missing. It is just blank. The 'Date Modified' field appears.
    This has become a large problem for me since another application I use will import only photos with a Date Creation Field...and will not import unless there is one.
    Anyone have any experience with this? How to fix it? Or how to at least enter a date in the fields?
    thanks in advance
    Tammy

    Make sure "Date Created" is check in your Finder View preference.
    Try trashing your Finder preferences and reboot.
    HD > User > Library > Preferences > com.apple.finder.plist
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • Can you please how to retrive the new netprice from the new validity period

    Hi,
    When you display  a contract using ME33K and you click on  a item and view its conditions(shift+F6), there might be 2 validity periods for a given item.
    and each period will have different netprice in it.
    One will be old date before the PO was created and the other new one which has validity till 31.12.999..We want to fetch the netprice for the new validity date but currently the program is fetching this data from the table EKPO which is having the netprice of the old date only..
    Can you please how to retrive the new netprice from the new validity period

    Thank you so much.
    But I need more help specific to my problem.
    Let me describe the same.
    Suppose the PO creation date is 04.07.2007
    The conditions for an item in a contract for the PO are as follows;
    1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
    2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
    We need to always fetch the netprice from the validity period which always matches with the PO creatio date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
    But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
    This data is then used to fetch the get the netpr data from EKPO.
    <u>what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date</u>..
    Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
    FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
                                p_c_k_bstyp  TYPE ebstyp
                                p_p_bukrs    TYPE bukrs
                                p_p_ekorg    TYPE ekorg
                                p_p_ekgrp    TYPE bkgrp
    *Begin of Mod-004
                                fp_p_cernam   type ty_r_ernam
                               p_p_cernam   TYPE ernam
    *End of Mod-004
                                p_s_werks    LIKE s_werks[]
                                p_s_matnr    LIKE s_matnr[]
                                p_s_lifnr    LIKE s_lifnr[]
                                p_s_val_dt   LIKE s_val_dt[].
    *mod-002
        data : l_amount   type BAPICURR_D,   " Net price
               l_waers    TYPE waers,        " Currency Key
               l_eff_amount type BAPICURR_D. " Effective value
          data: l_v_netpr type bprei.
    *mod-002
    SELECT  ebeln
              bukrs
              bstyp
              aedat
              ernam
              lifnr
              zterm
              ekorg
              ekgrp
              waers
              wkurs
              <b>kdatb
              kdate</b>
              inco1
              INTO TABLE i_ekko
              FROM ekko
              WHERE    ebeln IN p_s_cebeln
                   AND bstyp EQ p_c_k_bstyp
                   AND bukrs EQ p_p_bukrs
                   AND ekorg EQ p_p_ekorg
                   AND ekgrp EQ p_p_ekgrp
    *Begin of Mod-004
                  AND ernam EQ p_p_cernam
                   AND ernam IN fp_p_cernam
    *End of Mod-004
                   AND lifnr IN p_s_lifnr
                   AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
      IF sy-subrc EQ 0.
    Populates internal table i_ekpo using EKPO table.
        SELECT   ebeln
                 ebelp
                 loekz
                 txz01
                 matnr
                 werks
                 ktmng
                 menge
                 meins
                 bprme
                 netpr
                 peinh
                 webaz
                 mwskz
                 uebto
                 untto
                 erekz
                 pstyp
                 knttp
                 repos
                 webre
                 konnr
                 ktpnr
                 ean11
                 effwr
                 xersy
                 aedat
                 prdat
                   INTO TABLE i_ekpo
                   FROM ekpo
                   FOR ALL ENTRIES IN i_ekko
                   WHERE ebeln = i_ekko-ebeln
                     and aedat = i_ekko-aedat
                     AND werks IN p_s_werks
                     AND matnr IN p_s_matnr.
    LOOP AT i_ekpo INTO rec_ekpo.
          MOVE rec_ekpo-ebeln  TO rec_contr-ebeln.
          MOVE rec_ekpo-ebelp  TO rec_contr-ebelp.
          MOVE rec_ekpo-loekz  TO rec_contr-loekz.
          MOVE rec_ekpo-txz01  TO rec_contr-txz01.
          MOVE rec_ekpo-matnr  TO rec_contr-matnr.
          MOVE rec_ekpo-werks  TO rec_contr-werks.
          MOVE rec_ekpo-ktmng  TO rec_contr-ktmng.
          MOVE rec_ekpo-menge  TO rec_contr-menge.
          MOVE rec_ekpo-meins  TO rec_contr-meins.
          MOVE rec_ekpo-bprme  TO rec_contr-bprme.
         MOVE rec_ekpo-netpr  TO rec_contr-netpr.
         move l_v_netpr        TO rec_contr-netpr.
    mod-002
          read table i_ekko into rec_ekko with key
                           ebeln = rec_ekpo-ebeln.
            l_waers =  rec_ekko-waers.
    CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
      EXPORTING
        currency              =  l_waers
        amount_internal       =  rec_contr-netpr
    IMPORTING
       AMOUNT_EXTERNAL       =  l_amount.
                rec_contr-netpr = l_amount.
    mod-002
          MOVE rec_ekpo-peinh  TO rec_contr-peinh.
          MOVE rec_ekpo-webaz  TO rec_contr-webaz.
          MOVE rec_ekpo-mwskz  TO rec_contr-mwskz.
          MOVE rec_ekpo-uebto  TO rec_contr-uebto.
          MOVE rec_ekpo-untto  TO rec_contr-untto.
          MOVE rec_ekpo-erekz  TO rec_contr-erekz.
          MOVE rec_ekpo-pstyp  TO rec_contr-pstyp.
          MOVE rec_ekpo-knttp  TO rec_contr-knttp.
          MOVE rec_ekpo-repos  TO rec_contr-repos.
          MOVE rec_ekpo-webre  TO rec_contr-webre.
          MOVE rec_ekpo-konnr  TO rec_contr-konnr.
          MOVE rec_ekpo-ktpnr  TO rec_contr-ktpnr.
          MOVE rec_ekpo-ean11  TO rec_contr-ean11.
          MOVE rec_ekpo-effwr  TO rec_contr-effwr.
    mod-002
          CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
       EXPORTING
          currency              =  l_waers
          amount_internal       =  rec_contr-effwr
       IMPORTING
          AMOUNT_EXTERNAL       =  l_eff_amount.
               rec_contr-effwr = l_eff_amount.
    *mod-002
          MOVE rec_ekpo-xersy  TO rec_contr-xersy.
          APPEND rec_contr TO i_contr.
          CLEAR: rec_ekpo,rec_contr.
    mod-002
          CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
    mod-002
        ENDLOOP.
    Modifying i_contr using i_ekko.
        SORT i_ekko BY ebeln.
        LOOP AT i_contr INTO rec_contr.
          READ TABLE i_ekko INTO rec_ekko WITH KEY
                              ebeln = rec_contr-ebeln
                              BINARY SEARCH.
          MOVE rec_ekko-bukrs  TO  rec_contr-bukrs.
          MOVE rec_ekko-bstyp  TO  rec_contr-bstyp.
          MOVE rec_ekko-aedat  TO  rec_contr-aedat.
          MOVE rec_ekko-ernam  TO  rec_contr-ernam.
          MOVE rec_ekko-lifnr  TO  rec_contr-lifnr.
          MOVE rec_ekko-zterm  TO  rec_contr-zterm.
          MOVE rec_ekko-ekorg  TO  rec_contr-ekorg.
          MOVE rec_ekko-ekgrp  TO  rec_contr-ekgrp.
          MOVE rec_ekko-waers  TO  rec_contr-waers.
          MOVE rec_ekko-wkurs  TO  rec_contr-wkurs.
          MOVE rec_ekko-kdatb  TO  rec_contr-kdatb.
          MOVE rec_ekko-kdate  TO  rec_contr-kdate.
          MOVE rec_ekko-inco1  TO  rec_contr-inco1.
          MODIFY i_contr FROM rec_contr.
        ENDLOOP.
      ENDIF.
      REFRESH: i_ekko,
               i_ekpo.
      CLEAR  : rec_ekko,
               rec_ekpo,
               rec_contr.
    ENDFORM.      "select_contracts
    Thanks.

  • How to call the new page in smartforms

    Hi friends,
    How to call the new page in smartforms.
    Thanks,
    Ravi

    Hi,
    Create a command node and click the 'Go to new page' check box specifying the page u want to go.
    You can enter your condition for which it should branch to a new page in the 'conditions' tab.
    Regards
    Shiva

  • How to control the number of fields in the Advanced mode in af:query

    Hi,
    How to control the number of fields in the Advanced mode in <af:query>?
    Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
    How do i control the list of fields in ADDFields button?
    Any ideas?
    KR

    You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
    http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

  • How to tracke the new entries in database table ?

    Hi,
    How to tracke the new entries in database table ? is there any FM or report is there to check it ?
    regards
    vishnu

    Hi Vishnu,
    u can write a report program for this and in that use the event  :
    AT NEW <field-name> ( use primary key)
    your statements
    ENDAT
    for eg.
    loop at itab ( herfe itab must be of type of table for which u want to track new entries)
    at new matnr
    write:/ new record
    endat
    endloop.
    schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
    regards
    Vinod

  • How to get the new dependency SCA's related to  7.4 version with out upgrading NWDI server

    Hi
    We are in process of upgrading the custom webdynpro and portal components to SAP Portal  7.4.
    I saw in some discussions that, we don't need to upgrade NWDI , we need to install new JDK version(1.6) to map that jdk to the new track for migrating the custom component to new track.
    But i have questions related to NWDI track dependency files.
    When i create new track to support 7.4 components need to be available in the respective track.
    we have central SLD and we create all the product and custom software components in that SLD(7.01) itself , To create the custom software component in SLD , i add  required dependency files. once the software component is ready, when i create the track  in nwdi system i will be able to fetch the custom software component in nwdi system by click on cms update.
    But now i  need following new new dependency software component versions   in SLD  related to  7.4 for creating new software component to those dependency's to support the new track in NWDI.
    EP_BUILDT
    SAP-JEE
    SAP_BUILDT
    SAP_JTECHS
    But my SLD server version is : 7.01 version.
    so do i need to upgrade the SLD server to  7.4 get the latest dependent SCA's  or just need import new SLD content in SLD server to add new custom software component to create?
    kindly advice how to get the new software components  in SLD without upgrading the NWDI  & SLD system to  7.4
    Thanks

    Jun,
    Thanks for the reply.
    But i am not able to find the  following two SCA's related to 7.4 version. I am able to find the rest of the SCA's. I able to see only 7.02 version related to following dependency files.
    SAP-JEE
    SAP_JTECHS
    SAP-EU (CA EU)  ( having only 7.01, 7.02, 7.10, 7.11 and 7.20) related to Guided procedures.
    Did they changed any naming conventions related to these software components? if so what are new software compnents names to use
    Please clarify.
    Thanks
    Vijay

  • How to fetch the Business area field value from MIRo into report

    Hi,
    I want to create a report for MIRO with payment details.
    How to fetch the business area field value in to report.
    What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
    After that, how to find the accounting document for payment and check details.
    What are the table names and field names. What we can get from PAYR table.
    With regards
    Lakki

    Dear,
    For Bussiness area
    RKPF-GSBER

  • How to change the "content created" date/time in FCPX?

    Since I've had problems importing my whole iMovie event library into FCPX I decided to run some tests with importing individual files (part of iMovie events and originally imported from camera into iMovie). Some of them for some reason got the wrong "content created" date/time in them while in iMovie they have the right date/time set. Does anybody have an idea on how to change the "content created" timestamp?

    I had a bunch of DV files that imported stamped with the file modification date and time.  I did not find a way to change it in FCPX. With FCPX not running, I used A Better Finder Attributes to modify the creation and modification dates of the files in the event folder. FCPX reconnected to them but the event still showed the old range of dates so I created a new event and moved the clips to it. Maybe ther is a beter way but that is how I did it.

  • How to upload the new  position details in OM

    Hi  Experts,
    How to upload the new position details / Org Unit details in OM .
    Thanks in Advance.
    Regards,
    IFF

    HI,
    If it is huge data you can upload through LSMW or BDC. If you want to
    upload a position Goto po13, click on OBJECT and click on create.
    There you can create the new position and give necessary relationships.
    Regards
    Vijay

Maybe you are looking for