How to do the Partial delivery for configurable material ?

Hi All,
I am creating a sales order for a configurable material and is trying to do the partial delivery for the same. But, after the outbound delivery the status of the sales order is shown as completed although I have done the partial delivery.
Here are the steps I followed.
1. material I used here is a configurable material.
Main settings.
a. In Basic Data tab, marked as configurable
b. Procurement type='E' in MRP 2 tab
c. Strategy group as 82 in MRP 3 view.
2. I created a sales order for quantity 10
3. Created a production order followed by goods Movement thereby increasing the stock.
4. Did the outbound delivery for quantity 5.
Now if I checked for the status of the sales order using VA02, the status for the line item as well as for the sales order was "Completed" although I had done partial delivery.
I have checked for setting in Customer master record, item category in VOV7. Everything seems to be fine.
I checked for all the information in the FORUM without any help.
Can you please help me?
Kind Regards,
Anupama

Hi,
For Info, I am creating a sales order for Item category TAC.
1. In my case, after completing the partial delivery, in the document flow for Order, the status is shown as completed.
2. In status overview for this item, delivery status indicator is set as 'Fully delivered'.
I did check in the customer master record and the field
Partial delivery per item is set to Blank( Partial delivery allowed)
3. I did run the report RIBELF20 and I am getting this error for all the sales order I created for partial delivery for configurable material.
For Normal item, the status is showing properly.
Is there any other settings I have to check?
I needed this to be working. Please help

Similar Messages

How to extend the costing view for a material

How to extend the costing view for a material

Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

How to assign the same GTIN for different material?

Hi,
I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
Now we need to assign the same GTIN to different material numbers.
Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
So, here is the question again:
How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
Any advice is appreciated,
thanks,
Marco.

1. the GTIN is generated
This should be "external" number range only.
2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
Unable to understand that why you need same GTIN in two different articles?
Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

How to set partial delivery for Purchase Order line item

Hi Team
We have created a PO for 100 quantity along with 25% over delivery tolerance. We have done 5 GRNs totaling for 95 quantity. when we try to do another 10 quantity, system not accepting the GRN.
I want to set the partial delivery for this line item. Please help how to do this.
regards
Ravi

where did you check the underdelivery tolerance of 0?
the PO is the place to check, changes in material master will notz effect existing POs.
if you removed the delivery complete indicator and the item still does not show up in MIGO, then set the "propose all items in MIGO settings"
if it still does not show up, then you might have other restrictions like confirmations , last goods receipt etc.
the error 'Document does not contain any selectable item" is often discussed in this forum, you will find numerous threads that list what you have to check.

How to create the return delivery in MM

Hi,
Please let me know the detailed steps as to how to create the breturn delivery for the Po in MM with reference to Advanced shipping notification in sus.
Our ins MM-XI-SUS scenario.
thanks,
Manu

Table MARDH has been introduced from version 4.6B. This table represents history stock i.e. stock for previous months.
Stock for previous month gets updated in table MARDH when the transaction takes place in the current month. e.g. if a material is having stock of 30 nos. as 30th April'06 and there is goods issue for this material on 5th May'06 for 5 nos. then entry will get updated in table MARDH for month 02 (assuming fiscal year is from April to March) with stock qty as 30 nos. If no transaction takes place then entry will not flow to MARDH.
Hope the above is clear.
Regards
Rakesh Pawaskar

How to display the 'language code' for language dependent 'Short text' ?

Hi,
I am new to BW.
Can somebody help me with the following issue?
I have an attribute 'Material category description' and I chose short text exists and made it language dependent. I had loaded the master data successfully.
Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
I had checked the text table using SE11
It displays the following fields over there.
/BIC/TS1_MCT_DS   [ /BIC/TS1(InfoObject name) ]
LANGU
TXTSH
I appreciate your help!
Thank you
Sekhar

Dinesh,
I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
In SE16, I could display the data in the following format.
/BIC/ST_PRID                TXTSH                 TXTMD
P01                                   umbrella                 rainyday
P02                                  tent                         waterproof
etc.
I want to see the 'language code' as one of the columns in this table.
Can you help me do that?
Thank you,
Sekhar

HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02

hi
HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02.
i want to display this field in my report. what is the fieldname and in which table it is ?

Hi Jyothsna,
There are 2 dates when you say Requested Delivery Date
1. Header level in VBAK-VDATU is the field
2. At item level it is in the schedule line. VBEP-EDATU.
The relationship between item (VBAP ) and schedule line ( VBEP )is 1 to many. But there will be mutiple schedule lines only if you are using the scheduling functionality. Also note to check for confirmed quantity (VBEP-BMENG) to be greater than 0 and use that schedule lines EDATU date as Requested delivery date.
regards,
Advait Gode.

How to see the change logs for billing document

Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan

hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.

How can I have message delivery for Iphone ios7.1

How can I have message delivery for Iphone ios7.1

There is no option in the mail application to request a read receipt - if that is what you are asking.

How to set the connection parameters for SQL

How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi ‏21 KB
Doc1.doc ‏45 KB
db1.mdb ‏112 KB

Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

How to find the standard Idoc for Transfer Order (LT03)

hi
How to find the standard Idoc for Transfer Order (LT03)
How to create the Idoc on LT03
plz help me out
Thank u
Ram

Someone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK
Please reward points

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to get the last error for while loop?

How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

What do you mean by "get" and "transfer"?
If the shift register is not what you want, use a plan tunnel instead.
Typically, programmers are interested in the first, not last, error.
Can you show us your code so we have a better idea what you are trying to?
LabVIEW Champion . Do more with less code and in less time .

How to change the "home" computer for a iPod touch 3G (iOS 4.2.1) and an iPad 2(iOS5)? Music library has been already moved to iTunes on the new computer.

I have a iPod Touch (3rd gen) that has not upgraded it's OS beyond iOS4.2.1 even if I have tried connecting it into iTiunes I have a iPad2 which has been recently upgraded to iOS5 . Both were connected to a laptop computer that my husband will take with him when he moves to a different city. I will most probably buy a second laptop sometime, but meanwhile I want to tether my iPod touch and iPad 2 to my desktop PC for now. Before I took the plunge, I had a few questions which I am hoping this forum will help me answer
1. How to switch the Home PC for these devices? I have already transfered my Music library on to my Home PC and then downloaded and reorganised with iTunes. Since I am reorganising the library anyway I don't minding removing all my music from the iTouch and set it up from scratch for the music. However, I removed all musci from theiTouch, changed it to manual mode and connected it to the desktop- It's detecting it fine- but it still is not the home computer for the iTouch- everytime I try to put new music in it- it is deleting everything old- I can't see the same controls as I see from the laptop at all- how to rectify this? To I need to set this up as a new iPod (restore route)?
on the touch I have very few apps and don't care about them. on the iPad I do have a couple of valuable apps that I want to hold on to- so have n't tinkered with it at all- what is the smoothest way for thsi transition? The iPad doesn't have any music on it at this time, but what to do if I want to transfer some?
2. Is there a way I can store the organised iTunes info in any way- like I said I might buy a new laptop in a few months but do not want to reorganise my iTunes over agaoin- it' a fairly large collection most of which is n't purchased from the iTunes store.
3. Why sin't my iTouch 3G upgrading- it's stuck on iOS4.2.1 but iTunes doesn't show any updates- even with chck updates button iTunes show that it is a current version.
thanks for reading through and any help that I can get to sort this mess out.

The recent release of iBooks 1.2.1 has corrected the problem of the missing Dutton edition of Winnie-the-Pooh. It may have been there with the previous install of iBooks but it would never display in the bookshelf. After updating iBooks to 1.2.1, the Dutton version (the one included with iBooks) suddenly appeared on the bookshelf. So it was a software glitch after all and not a fix Apple chose to document explicitly in the update.
Message was edited by: Rick Lang

How to do the Partial delivery for configurable material ?

Similar Messages

Maybe you are looking for