How to document for storage location summary

Dear All,
I am using this how to document and applying it to my scenario. Has anybody implemented this how to document?
My question was supposed I have some additional key figures in the report, say apart from ValStockValue and Total Stock, I have stock in QA, stock blocked, value of stock in QA, value of stock blocked.
What changes do I make changes to the source code of the FM module mentioned in the How to document..
Any inputs please!

Matt,
Check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc
Regards,
Masood Imrani S

Similar Messages

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

How can i add STORAGE LOCATION field which is not...............

hi,
sap gurus,
good morning to all,
how can i add STORAGE LOCATION field which is not in the standard tables namely
KOMP, KOMK, and KOMG.
how to include it in our FIELDS FROM FIELD CATALOGUE.
if we include this field is there any impact on the standard tables.
plz let me know this.
bcz
we are selling our products in two ways
(1). one is straight from factory ie direct sales from factory
if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
deliver him which ever is economical either rail or road.
before coming to second case of selling the goods
we will do STOCK TRANSPORT ORDER from plant to different storage locations.
if we did STO thru road we have to sell the goods thru road only.
if we did STO thru rail we have to sell the goods thru rail route only.
(2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
location which is not registered under excise.
if the goods came by road then it will be delivered by road only.
if the goods came by rail then it will be delivered by rail only.
my logic here is
basing on the
storage location, transportation types, and distance i want to create condition record
that captures exact frieght at the sales order level.
confirm whether i am right or wrong.
regards,
balaji.t
09990019711.

Hi,
It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
But if you have no choice expcept to change the standard tables to meet your requirement - then you need an access key to modify the object, which is available from the market place.
Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
REWARD POINTS IF HELPFUL
Regards
Sai

HU Configuration for Storage Location

Hi everyone.
In the following point of config, there is something I do not understand.
I hope somebody can explain it to me.
HU Requirement for Storage Locations and Default Values for Deliveries
Are the Vendor and Customer needed in this table?
If they are, what purpose do they serve? What are they needed for?
And again, if they are, do they represent the Plant? or what?
Should they be created with special characteristics?
I know a lot of questions, But I do not understand.....
Thanks,
Alain

Hello Alain,
When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
Regards
Gopal

Negative stock for storage location M7 021

Hello
I use negative stock for some materials
When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA: 24000641 XXXX 9999 YYYYYYY
This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
I set - allowed negative stock in material master data MM02 and for plant in WB02
Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
Could You help me?
Thank You in advance
Arek

Go to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
If use ful award points

Problem in Address update for storage location via LSMW

I am trying to update the address of storage location thru LSMW,
Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
Currently my recording only takes me to the create storage location & no LHS 'dialogue structure' for 'Addressees for storage location'
Please give the suggestions as I its on urgent for me to update 1000 storage location.

Dearrrrrrr Prasoooon,
U got it Right Again!!!!!
Thank you so much.
I resolved with above Note & now i can happily go on leave from tomorrow.
Salute to you!!!!!!!!

Table for Storage location name..

Hi frnds,
I have a storage location number.. Now how do i find the name or Description for that?
How to find the table? ,, If anybody knows the table name plz let me know..
Thank you.
Sree.

Hi,
CHeck Table MARD for storage Location
Regards,
Prashant

Authorization Check for Storage Location

Hi Experts,
I have the following requirement :-
I have Plant : P081 created under Company Code : P110.
I have got various Storage Locations under this Plant for example
KT01 - Main Stores
KT24 - Remote Store.
The KT24 store is basically a remote location store. I have activated the Authorization for the Storage Location KT24 in the SPRO Settings
Material Management --> Inventory Management and Physical Inventory --> Authorization Management --> Authorization check for storage location.
I have maintain the following authorizations for the Object M_MSEG_LGO as follows :-
1. OBJECT : M_MSEG_LGO.
>> 2. USER ID : 081Store
>> 3. PLANT : P081
>> 4. STORAGE LOCATION : Kt24
>> 5. ACTIVITY : 01-03
>> 6. MOVEMENT : 101, 102, 201, 221, 261
and authorization for T_code MIGO_GR and MIGO_GI . I want to restrict the user for transaction only for this storage location but the system is allowing the user to post GR document for KT01 stores also.
Can any one suggest a solution or settings that need to be done for the user to be restricted to prepared GR for Storage Location KT24 only.
Thanks in advance.
AJ

Hi,
You set the authorizations to users with tcode PFCG. To know the reason of deny some access run tcode SU53 after SAP denies the access to some documents / objects.
Regards,
Eduardo

Report for Storage location wise Stock with value..?

Hi guru's
Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK with VALUE..?
Urgent reply me ..
Thanks
sap-mm

Sorry Mr chetan,
I want to see only the stock available in my company with Value and storage location wise..
Please try to get report for this
Thanks
sap-mm

System asking for storage location in case of Asset GR,

dear all,
In our case system is asking for Storage Location in case of Asset GR, though PO was account assigned.
I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
Pls guide,
Regards.

Hi,
Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
Reg
dheeraj

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

Table name or report to download materials for storage location

Hi ,
Please let me know table name or report or tcode to download material for storage location . I know MARD only. Apart from that table any other please let me knw
Thanks in advance
Smitha

Hello,
For Material , Plant and storage location report, in SAP Std reports are available.
1)MC.6
2)MC.9
3)MB5b
4)MB52
or else get directly from table MARD through SE16 tcode.
Regards
Mahesh Naik

Classification System for Storage location

Hello,
I would like to know if you can apply the classification system (as we know it well from the material master), to classify the storage location configuration. I need this for a client who wants to analyze his information system with the possibility to drilldown the characterics of his storage locations. But to do this, he first would have to apply the classification system to these storage locations, but I can not figure out if it is possible, and where to customize it.
Thank you in advance for your help,
Dominik Ley
DTI Consultores
Chile

yk,
perhaps it is even some kind of weird, but for 2 reasons I dared to make the question:
- Classification system is a cross-application component (Material Management, Project System, etc.), so why not for something like storage location.
- For Plants you DO HAVE this classification. Go to CL02 and have a look on matchcode of 'Class type' field. So, my idea was to check if there was something similar for storage location.
If you do have any other idea, or anyone else, I appreciate a lot your help.
Regards,
Dominik Ley

Table for storage location addresses

Hi
I am trying to find the table where addresses for storage locations are found. I have found the storage locations in T001L and the addresses in ADRC, but cannot find the link between these tables.
In which table can I find the link between storage locations and addresses?
Any help is greatly appreciated.
Regards

Hi,
check TWLAD table.
Regards,
Chandra

How to document for storage location summary

Similar Messages

Maybe you are looking for