How to downgrade the DSPware

We may hit the bug CSCsd54344. Need to downgrade the DSPware to 4.4.12. Wondering if the DSPware firmware is available in the CCO and how to do the downgrade.
Regards

You ll have to contact TAC for this. Or else downgrade IOS, but i dont have a clue how u can figure out which version of 12.X.Y has dspware version 4.X.X.
DSPWare is bundled with the IOS, but if TAC asks you to upgrade DSPWare, they send you the file and you tftp the file to flash and reload the router. The router will start using the new DSPware. If you remove the dspware file from flash and reload the router again dspware should automaticallly downgrade to what is bundled in the IOS.

Similar Messages

  • Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

    Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

    Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT201238 How to downgrade the storage capacity?  step by step please:-)

    How to downgrade the storage capacity?  step by step please:-)

    Is this document detailed enough?
    See:  iCloud storage upgrades and downgrades - Apple Support
    Scroll down to "Downgrade your iCloud storage plan"

  • May I know how to downgrade the iOS version to some older one?

    Pls give me a solution to this (how to downgrade the iOS version to some older one?) this will be a great help and i am seeing videos and support columns from a variety of popular websites to get some knowledge about this but it all ends up failing and a waste of time. Any professionals there? To help me . Pls

    Sorry, downgrading is not supported.

  • HT1222 how to downgrade the iphone from io7

    how to downgrade the iphone from io7

    Cannot be done. Downgrading is not an option.
    What is the issue you think downgrading would address? Perhaps there are other approaches.
    tt2

  • Satellite C660 - How to downgrade the BIOS?

    I have the same problem. Latest BIOS version for my notebook is 1.3 but on my is 1.4 installed?! Notebook is 10 days and I cant work with it.
    We have few C660 (PSC0LE) we bought tham on same day and they all have 1.3 and are working perfect. Only my is BIOS 1.4 version and its not good at all.
    Please my question is how can I flash BIOS with 1.3?

    Hey,
    I agree with the user above. BIOS downgrade can only be done from an authorized service provider. So you should get in contact with the guys and ask if they can downgrade the BIOS for you or probably they can send you an older BIOS version via e-mail Just talk with the guys a little bit ;)
    But normally newest BIOS version has most bug fixes so I dont think a downgrade is useful

  • How to downgrade the Virtualization Software Version for a particular host

    Good morning all:
    I'm trying to downgrade the Virtualization Software Version of one 2012 R2 host to match the others. One host is at 6.3.9600.16404. This is the correct running version of the cluster. The incorrect version on one host is 6.3.9600.17120. I would like that
    version downgraded to 6.3.9600.16404.

    You must mean the "virtual machine guest services" in the properties of a VM.
    This is dependent on the release and patch level of the Hyper-V server that the VM was deployed to.  As that is where the Integration Services (vmguest.iso) comes from, it does not come from SCVMM.
    So, if you happened to deploy this VM to a Hyper-V Server at a newer patch level, then that would explain the issue.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • How to Downgrade the CAM to v4.6.1

    i have a Cisco CAM version 4.8.3 and i want to downgrade it to 4.6.1, i have the tar file of the version 4.6.1, any one can provide me with the right steps of the downgrae operation.

    the problem was i already work by version 4.6.1 but the system crashed completly and the only installation CD i have is version 4.8.3 so i installed it but the snapshot (Backup) cannot be restored bec of it was version 4.6.1, so i need to downgrade from 4.8.3 to 4.6.1 to restore the snapshot, if u have another solution please tell me about it.
    NOTE:
    i have the tar.gz files of both versions 4.1.3 and 4.6.1 tar only not iso.
    Thanks for your fast response
    Hany Samara

  • How to downgrade the target framework from 4.5 to 4.0?

    Hello everyone,
    I have a VisualStudio 2012/C++ project, which targets dotNet Framework 4.5. In fact the only reason I am using the Measurement Studio (also 2012) for this project is the Analysis library.
    As soon as I installed the framework, MS2012, and added references for the assemblies I need the project started working. Everything was OK until it turned out I have to support customers
    who are still running Windows XP.
    dotNet 4.5 is not XP-compatible, therefore I would like to use the dotNet 4.0 Analisys.Enterprise assembly... hoping it will resolve the problem The only thing is: where to find it?
    I will greatly appreciate comments and suggestions: both regarding whether the whole undertaking makes sense, and if it does - where to get the assembly. On the additional note: will it affect the licensing (I had one until was guided by NI people re how to create a exe.licx file)
    Thank you in advance!
    Mike

    Hi Kevin,
    before switching to the MS2013 I had a MS2008 license, which I used with Visual Studio 2008. As soon as we started using Visual Studio 2012 and Windows 7, we were unable to use that outdated version anymore, and "jumped over" to the MS2013.
    Thank you,
    Mike

  • Downgrading the library?

    Just downgraded back to Snow Leopard, and installed Aperture 3.0.
    I used to run Mountain Lion and Aperture 3.3.2, which of course upgraded my photo library.
    Can anyone tell me how to "downgrade" the library to make it work with the older version? Thanks!

    Thanks for the brutal truth... I will manually re-import the photos from the time machine back-up.
    Pity Apple is not really supporting Snow Leopard any more, I think the Mac OS has gone downhill since then...

  • How to downgrade OAS 4.0.8.2 to 4.0.8.1

    How to downgrade the OAS 4.0.8.2 to OAS 4.0.8.1
    is there any script availble or deinstalling the new and then installing older version is the only alternative.
    And how to find out which version JDK used by OAS
    null

    Where can I download OAS 4.0.8.2.1?
    Thanks,
    Davaa

  • How to downgrade version?

    I have battery problem with ipod 30GB 5th gen. I was thinking maybe because the last version that I had upgraded. And I just upgrade to the latest 1.3 version and still no change the battery problem. I want to downgrade my ipod version to the one before the last version (I forgot the version). Does anyone know how to downgrade the version?

    If you have the previous version still on your computer, try this.
    Remove the latest update from the iTunes/iPod updates folder.
    On a Mac this is found in (name of)user/library/iTunes/iPod software updates.
    Then prevent iTunes from checking the internet for a new update (preferences/general and remove the check mark from "check for updates automatically), then click restore. Or simply disconnect your modem from the computer.
    You should then be asked if you want to use the previous version of the iPod software.

  • HT201210 I really wish to downgrade the ios7 to the older one ... how can i do it?

    I really wish to downgrade the ios7 to the older one ... how can i do it?

    As the other thousand posts on here would tell you had you searched the forums before posting - Downgrading is not supported.

  • HT4623 How i can downgrade the ios to 6 version on my ipad mini?

    How i can downgrade the ios to 6 version on my ipad mini?

    Please see item 3 Here  >  Community etiquette

  • How to downgrade from ios8.1 to ios7 on the iphone4s?

    How to downgrade from ios8.1 to ios7 on the iphone4s ? My space isn't enough.

    erikfromelburg wrote:
    BUT iT is getting slower
    Try further troubleshooting, such as restoring it as new and testing it as a new device: Set up as a new Device - Apple Support

Maybe you are looking for

  • Why don't examples work?

    I'm an old hand at LabVIEW (15 years), but a newbie to RT. I just loaded the RT module (7.0) on top of my Windows 2000 LabVIEW 7.0 Just plugged in my 7041 board, and ran a few basic things, targeting the RT board. All is well. Ran some timing tests o

  • S_ALR_87012357-Advance Return for Tax on Sales&Purchases-additional steps

    Hi SAP Team, We have config "Advance Return tax on Sales /Purchases" u2013 S_ALR_87012357 for finance team in Czech Republic (CZ) and the report is working fine and weu2019re using the program RFUMSV00. Now we have an additional issue that need to me

  • "purchase order" doesn't work

    Hello, I tried the following example http://www.adobe.com/devnet/livecycle/articles/lc_designer_db_lookup_tip.pdf The dropdown list works fine but the button doesnt work. Everytime it gives me back a script-error without giving any details. error: "u

  • How to change PrinterJob.printDialog(..)'s dialog's language?

    Hey! I'm using PrinterJob.printDialog(attributes)-method for printing. How do I change the language on the printing dialog? Is there an attribute that does the trick or does it have something to do with Windows' settings? Cheers, Antti

  • 8610e - can Ipad switch mono/colour before printing?

    Hi, HP 8610e printer and Ipad 2 When I print the only options available are to change the number of copies and single/double sided printing. It prints in colours and there is no option shown on the ipad for switching to mono. Is there a way to do it