How to download lion in macbook air 2011

hi
i can not lion in macbook air new 2011
because ask apple id !!!
plz help

You need to set up an Apple App Store account in order to be able to dowload software from the App Store. An App Store account requires an Apple Id (normally this is your email address). If you don't have one you can set one up. Note this is the same id you use for iTunes so if you have an iTunes account use those credentials.
If you have a new MBA 2011 (i.e. one bought after about July this year) it will already be running Lion. To make sure go to the Apple menu (top left corner of screen) and select About this Mac. If the version of Mac OS X shown is 10.7 then that is Lion.
Mark

Similar Messages

  • How do I connect my MacBook Air 2011 to a projector?

    How do I connect my MacBook Air 2011 to a projector?

    It depends on the input connection for the projector, but since many are rduced resolution, VGA seems to be the prevalent common connection.
    It's just a matter of buying the adapter that adapts VGA to the Mini DisplayPort/Thunderbolt port on your Air. If it is a DVI or HDMI connection input on your projector, the online Apple Store carries that as well.
    This adapter and sufficient length VGA cable is all you need for VGA.
    Here's the DVI adapter.
    For some reason, I am unable to bring up the Moshi HDMI adapter on Apple's site.

  • How to download word in macbook air ?

    how  can i to download word into a macbook air ?

    OK, I thought it was since there are often offers of Office for educators, etc, at reduced prices.  And when I bought my MBP they offered to install Office.
    I have switched to Pages and Keynotes anyway now.

  • How to add Lion to macbook air from Imac?

    How can I upgrade Lion remotely to my Air using my Imac file sharing?

    You need to set up an Apple App Store account in order to be able to dowload software from the App Store. An App Store account requires an Apple Id (normally this is your email address). If you don't have one you can set one up. Note this is the same id you use for iTunes so if you have an iTunes account use those credentials.
    If you have a new MBA 2011 (i.e. one bought after about July this year) it will already be running Lion. To make sure go to the Apple menu (top left corner of screen) and select About this Mac. If the version of Mac OS X shown is 10.7 then that is Lion.
    Mark

  • After installing Mountain lion, macbook air 2011 very slow

    After installation of Mountain lion my macbook air 2011 got very slow. There has been a firmware upgrade too. Can you help?

    Hi guys! Just installed ML on my early 2009 MBAir (after market upgraded to a 240g SSD, but still just 2g of ram), and I panicked a bit at first when it turned out to be painfully slow and not displaying right (+slow trackpad!).
    Bear in mind that the first thing ML will do is index your files for spotlight, which takes a while and is a bit of a resource hog that will slow everything else down and cause your machine to heat up.
    I let it work all night, but by morning, my CPU usage was STILL at 100% and everything slow...
    Activity monitor showed nothing over 10% CPU usage... First tip was to display ALL processes in Activity monitor, and not just MY processes, to see what exactly was sucking up my CPU!
    Then, and it seems to often be the culprit on MBA's, it turned out that the kernel_task process was using up to 170% of my CPU usage (!). Problem is, that process sort of does a million things, so it can be hard to pinpoint the actual issue.
    One of the things it does though, is work against overheating...
    Given the download+install+indexing, my machine had been working all day and night, and was indeed getting super hot. Turning it off and letting it cool down for a whole fixed it all.
    Kernel_task is back to normal, CPU usage is normal, display and trackpad are back to perfect. And in the end, ML is snappier than SL for me, even with the bare minimum in memory!
    Good luck! <3

  • I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    If you use a trackpad and don't want to switch to a mouse, you can uninstall and reinstall all day long and will still have problems, but if you really want to try it, you can download PSE 12 here:
    Download Photoshop Elements products | 12, 11, 10

  • My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

    My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

    You are using Snow Leopard so you have no OPTION+R shortcut. You need to boot the computer from your Snow Leopard DVD or USB flash drive.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.

    After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.  Help -Sami

    Well, if you did then you may be able to track it, if you did not it's not possible.

  • MacBook Air 2011, running Lion 10.7.2, and Safari won't load any pages. Firefox loads everything just fine. What's going on?

    I have a MacBook Air 2011, running Lion 10.7.2, and Safari won't load any pages. Firefox loads everything just fine. What's going on?

    d Pacifist to reinstall both the Safari
    application and the WebKit framework
    was that before the 10.4.6 combo was applied?
    Nope, I tried the Pacifist route after applying the combo update.
    It does sound as if webkit is busted at the moment.
    What version of osx is on your install disks?
    Not sure, I'll have to check them.
    I'd like to avoid a archive & install, but I'm beginning to think it's my only remaining option.

  • HT1338 How safe is Codec to download on my MacBook Air to watch movies?

    How safe is Codec to download on my MacBook Air to watch movies?

    markprice22 wrote:
    How safe is Codec to download on my MacBook Air to watch movies?
    Which codec?
    Pete

  • MacBook Air 2011 Fan increased after installed mountain lion

    Hi all,
    I have a Macbook Air 2011, Intel core i7. After when I installed ML I noticed that battery go down very fast (about 2:40h) and the Fan speed RPM is about 6500 all time, but I haven't any strong operation pending or App. I have the same app open since lion (Internet, chat, jdownloader) in background (skydrive,evernote,weatherhd) the same app and background task I have with Lion.
    In monitor activity all task is from 1% to 20-30% of usage.
    Any Tips?

    I only have the fan kick in when the graphics is getting hit hard (playing games, driving external displays, etc) with crappy intel on board graphics. 
    Is your MacBook Air in a protective case, skin or having anything block the vent hinge?
    Definitely sounds like the OS thinks it needs to keep running the fan.
    You might try this smart temperature desktop widget and monitor your temperature to see if there is any sane reason for the fans to be on (they are loud!).
    http://www.bresink.com/osx/TemperatureMonitor.html
    My CPU Temp A Diode reports 117 plugged into AC with no fan running on a 13" MBA mid 2011

  • Did somebody know how to install mysql in MacBook Air version 10.8.1 os x mountain lion?, Thanks in advance

    Did somebody know how to install mysql in MacBook Air version 10.8.1 os x mountain lion?, Thanks in advance

    Am following your doc now (https://discussions.apple.com/docs/DOC-3082) and wondering if the edit
    First, fix the MySQL client library. (credit)
    For Lion, type:
    sudo install_name_tool -id /usr/local/mysql-5.5.22-osx10.6-x86_64/lib/libmysqlclient.18.dylib /usr/local/mysql-5.5.22-osx10.6-x86_64/lib/libmysqlclient.18.dylib
    also applies to Mountain Lion.  Am guessing it does as your credit link resolves to an article re. the Snow Leopard install.  Thanks in advance.

  • I can't recovery lion in Macbook Air late 2010 from my account. How i can do it?  And i not have CD or Stick

    I can't recovery lion in Macbook Air late 2010 from my account. How i can do it?  And i not have CD or Stick

    On Mountain Lion and Lion, you've Recovery HD > http://support.apple.com/kb/HT4718 If you can't start from Recovery HD, press Command, Option and R keys to start in Internet Recovery

  • How can I get HDMI out from my macbook air(2011)?

    How can I get HDMI out from my macbook air(2011)?

    It's rather simple. Buy a Mini DisplayPort to HDMI adapter. And then a HDMI cable long enough to link your computer the distance between both devices.
    Adapter
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?mco=MTY3ODQ5OTY
    Example Cable (buy longer one, if needed) You can these practically anwhere that sells HP TV's
    http://store.apple.com/us/product/MC838ZM/A?mco=MTY3ODQ5OTY

  • How do i download movie from macbook air directly to icloud?

    how do i download movie from macbook air directly to icloud?

    You want to download (I assume you meant upload) it to iCloud?  If that's what you mean, you can't.  iCloud will already have movies purchased from the iTunes store, which can be redownloaded (depending on your location) from your purchased list.  Movies from other sources cannot be stored in iCloud, except digital copies or purchased DVDs that are compatible with iTunes.

Maybe you are looking for

  • How to prevent a portal user from using the BEx Analyzer ?

    Hi, we have different type of users : most users may use the portal as well as the analyzer ; we have one special user with extended authorizations : this user should use the portal , where he has a limited set of queries to run with hardcoded filter

  • I want to restrict the display of  F4 values in the standard tcode

    In the standard tcode F-22 , for the customer display(F4 help values) ,i dont want to display a group or set of customers to be displayed. Which is the best way of doing this? Thanks . Edited by: peter k on Jan 19, 2009 7:27 AM

  • FI Report Painter (FGI1) - add new button in output screen

    Hi all, I have a report created by tcode FGI1 (Create Drill-down Report) which bases on form 0SAPBSPL-01 (Fin. Statement: Actual/Actual Comparison). I wanna know if there are any ways to add a new button in output screen after report execution (i.e t

  • NcSetAttr not working when setting Transmit mode

    I am using a NI-USB 8472 (low speed CAN @ 33333kbps) device and am trying to set it up for the wakeup mode which states in the devices spec that it has this capability.  However, attached is the quick test code that returns and error when using the n

  • OSB 10.2.0.2 Implementation on AIX 5.2 with HACMP - SSL Trust Issues??

    Hello All I think I'm on a bit of a long shot with this one unfortunately, but I am trying to implement an OSB solution on a production HACMP cluster. The configuration would look as follows: OSB Admin & Media Host : Windows 2003 x86 (Host: FPTXOSB01