How to download ni imaq usb camera driver
sir
i wants to download ni imaq for usb camera driver but i am unable to download it from specified position given in website . please tell me how i can download this software or there is any other link for downloading it.
this is adrees from where i was trying tom download it.
ftp://ftp.ni.com/pub/devzone/epd/ni_imaq_usb_installer_86.exe
please tell methat what is the problem.
mpsingh
The link you gave in your post is working form me. Maybe a firewall which can be located local or in your company network is blocking FTP downloads or downloads of files of type exe.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Similar Messages
-
How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor
Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
Pauli get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First : 0x4001c001
DLL Last : 0x41c7c0d8
Physical First : 0x84001000
Physical Last : 0x863bbdec
Num Modules : 294
RAM Start : 0x863c0000
RAM Free : 0x863d5000
RAM End : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files : 116
Kernel Flags : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start : 0x00000000
Driver Glob Length : 0x00000000
CPU : 0x01c2
MiscFlags : 0x0002
Extensions : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18 0x9 0x25 0x0 0x0 0x0
Row 1: 0x26 0xd 0x28 0x0 0x0 0x0
Row 2: 0x27 0x24 0x23 0x0 0x0 0x0
Row 3: 0x0 0x0 0x0 0x0 0x0 0x0
Row 4: 0x0 0x0 0x0 0x0 0x0
Row 5: 0x0 0x0 0x0 0x0 0x0 0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
Height = 0x280
Width = 0x1e0
HSW = 0x20
HFP = 0x8
HBP = 0x17
VSW = 0x1
VFP = 0x4
VBP = 0x3
DVI is not enabled
PixelClkDiv = 0x7
LogClkDiv = 0x1
ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed. -
SbRIO usb camera, driver from myRIO
Hi,
in myRIO the common USB camera works, is it possible to use the same set of drivers on sbRIO 9636?
I think it has the same OS, USB, only the CPU is different.
I can see the USB device, but not as an IMAQ camera.
Older posts says it was not possible, but there should be new drivers...
Thanks a lot.
Neo
Hardware-designer, inventor, freak...
FEI, VSB Technical University OstravaHi NeoGHOST,
The sbRIO-9636 and myRIO are quite different under the hood. They use a different processor and OS. sbRIO-9636 is using VxWorks OS on a Power PC and myRIO uses NI Linux RT on a dual-core ARM processor.
I'm not very familiar with the USB Camera driver, but I wanted to point out that it would diffenately require a different back end implementation to support both targets.
Regards,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be... -
Can I download onto a usb flash drive instead of a IPod
Can I download onto a usb flash drive instead of a ipod?
Yes, but it does not work the same way. Insert the USB flash drive into the computer and open it so it looks like a folder. In iTunes, highlight the songs you want, and drag them over to the folder.
If you usually run iTunes in full screen mode, make it smaller so you can do the drag. -
How can I use a USB camera with cRIO 9022. Please see my strange problem.
Hi,
I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window. Please see JPEG File 3 where I get NO ERROR.
I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
1) Create a NEW PROJECT
2) Add Targets and Devices(NI cRIO 9022)
3) Use the Scan Interface mode
4) Create a NEW VI under the cRIO 9022 device
5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
Thanks.
Amar.
Attachments:
NI Vision Acquisition Express Error for NI cRIO 9022.JPG 39 KB
IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG 82 KB
NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG 48 KBOnly GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
Machine Vision on NI CompactRIO and Single-Board RIO
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
How to dual boot from usb thumb drive in lenovo x1 carbon
How can I boot Lenovo x1 carbon 2014 from an USB thumb drive? It has Windows 8.1. And I have tried disabling secure boot in bios setting. And set usb drive to boot order 1. But that still does not work.
I use the
Windows USB/DVD Download Tool too to create the usb thumb drive. And I use the tool to copy the iso file there.
And when I use that drive on an older laptop runs windows 7. it works. -
How to transfer data from USB flash drive to iPad Air?
How do I transfer files and data from a USB flash drive, or from a PC, to an iPad Air?
With a USB flash drive you might, if the drive doesn't require too much power, be able to copy photos and/or videos (if they are under a DCIM directory on the drive and their filenames are exactly 8 characters plus file extension) from it to the iPad's Photos app via the camera connection kit.
What sort of files do you want to copy to your iPad, and have you got an app on your iPad that supports the file type that you want to copy to it ? Everything on your iPad has to be stored within an app, it doesn't have a 'file system' like a computer. Different apps have different ways of copying content to/from them e.g. via the file sharing section on the iPad's Apps tab when connected to your computer's iTunes, via your wifi network, email, dropbox.
Syncing with iTunes : http://support.apple.com/kb/HT1386
Syncing media : http://support.apple.com/kb/HT1351
Syncing photos : http://support.apple.com/kb/HT4236 -
How can I format my usb install drive?
how can I format mymacbook air software install drive.?, the ones that came with the Macbook Air as the OS is now old I have no Use for the Drive and would like to use it as a stylish usb flash drive.
the one I mean is here
Is it actually possible to format it?
thanks.It is showing up as a cd drive i should mention it is holding a 10.6 osx and so will not let me erase.
any suggestions?
thanks -
how to download music to a usb
Download the music to your hard drive then move the audio file to the USB icon on your Desktop.
-
How to i get my usb hard drive to auto show on desk top
Hi
I have a small business and so multiple macs with 1 single external hard drive for storage
One of the Macs automatically connects to the USB hard drive when the mac starts up in a morning, whereas with the others you have to search for the shared drive and manually connect to it.
We have now changed to a new hard drive and would like all the Macs to automatically link in the morning and so wondered how this is done. Also the older mac is now still looking for the old drive and I cant stop it!
Hope this makes sense?
Hope someone can help
Cheers
MichaelYou need to find the IP of that drive.
If they in fact do show up on the Desktop, then create a new Folder maybe named Shares on/in the Desktop, drag all those Shares shown on the Desktop to that Folder, drag that Folder to the right side of the Dock between Applications & Trash, this should give you a popup menu to select from.:-)
Mount that Share once, then once the Globe Icon shows up on the Desktop, drag that Globe Icon to the right side of the Dock between Applications & Trash. You now have a Dynamic Mount, a quick click on the Icon in the Dock will connect you. -
How to connect to a usb cam through acrobat api??
I have deveopled a plugin for acrobat...and want to initiate a usb cam through my plugin...is there any method available in the api to detect or connect to a usb cam????If yes please explain how to do so...
...is there any method available in the api to detect or connect to a usb cam????
No. You may look at the apis of your operating system. -
How Do I get My USB backup drive to wake after iMac wakes from sleep?
I backup using Time Machine to a USB portable drive.
When my iMac goes to sleep and wakes later, the drive icon is still on the desktop but it is not recognized by Time Machine as an available drive for backup. I have to shut off the drive and turn it back on.
Are there settings I must change or is it because the drive is USB powered and not direct powered?S-Dot,
How is the EHD formatted and is it connected via USB to the iMac?
Finally, is the EHD bus powered or does it have it's own power supply? If it's bus powered that may be the issue, in that case it MUST be connected directly to one of the iMac's USB ports or it must be connected to a good quality Powered USB hub that is connected to one of the iMac's USB ports.
Please reply to all questions. -
What packages to install, and how to install in an USB hard drive
Hello.
Well, as I said in another thread, I want to install in an USB hard drive. But I don't know how, because it hasn't graphical installer, but text installer. I tried in a virtual machine, and it was fine, but when I want to start it, an error appears, "Was not found a bootable system" or something. Maybe a VM is not as a computer, but... well. I didn't change anything while I was installing GRUB, and I know that I've to install it in /dev/sdb.
And I want to know too, what packages to install and what packages don't (the ones which are neither "base" nor "base-devel"). But I'll install sudo, links and ndiswrapper (for wifi).
Thanks, and excuse me if my English is bad.Gotta use the wiki my friend and this one is even translated into Spanish:
https://wiki.archlinux.org/index.php/In … C3%B1ol%29
As to your question about which packages you'll need beyond those in base and base-devel - that depends on what you want on your system... no one can answer that but you!
Welcome to Arch.
Last edited by graysky (2011-01-01 19:50:46) -
How to capture image from USB camera in Labview 2010
Hey all,
I am very new to Labview but am working on a project that requires me to use a sensor to send a signal to Labview to capture an image from a USB camera and save. Then apply some image processing to do some geometric calculations. The calculation will be based on pixels so I guess the image needs to be in bitmap form. Right now I am just trying to start with the image acquisition part and was wondering if this can be done in Labview 2010. I have the vision toolbox and NXT Robotics. Are there any examples on this website that will help and do I have te proper tools to do this? Once I get the image capture/grab to work using labview, then I could work getting a sensor signal to trigger that capture and finally the processing side.
Like I said, I am very new to this so I am not sure if I need to download any particular drivers or vi's that I am missing or what those might be. Can someone provide some insight, links, or any help would be appreciated.
Thanks in advance for any help/suggestions.Hi wklove,
In order to do vision with LabVIEW you need to to have the Vision development module and have NI Vision Acquisition Software (VAS) installed. It sounds like you are missing VAS you can download it here. Once you have this installed you should be able to see your camera in Measurement and Automation (MAX). After you are able to see the camera, take a look at the NI Example Finder by going to Help » Find Examples
Joe Daily
National Instruments
Applications Engineer
may the G be with you .... -
My car has a usb port how to download iTunes to usb in mp3
Hi My car has a usb port how
to lownload itunes to usb and make it Mp3 so my car can read it
ThanksFollow these instructions and the ones provided with the USB drive or car.
(65622)
Maybe you are looking for
-
I have the newest flash update. But when i go to some sites. I just see the first picture and the flash will not load. I have tried many times to re-install firefox, flash, and safari. My intel iMac wont play these sites, but my intel macbook will..
-
Is there a 'macro' to convert a Word style to CSS tag?
The text in my source (Word) has a named character style applied to selected words/phrases throughout the text. I want to detect that specific character-style spec. in the source (pasted from Word into a DW target page) and have a way to translate w
-
How to know my Iphone 4s carrier
I just boult an used Iphone 4s and the guy told me the wrong carrier, how can I find wich carrier my Iphone works? or how can I unlock it? my Imei it is 01319100771721 0 thanks
-
Failure [INSTALL_FAILED_INVALID_APK]
I am using 20100909 build of AIR for Android. Following Developing_AIR_Apps_for_Android.pdf, i managed to go through all the steps and created a simple apk. The emulator is also up and running and I can install Runtime_Emulator_xxxxxx.apk on it. Howe
-
Grid Control not seeing Oracle AS 10.1.3.3.0
Guys, Grid Control version is 11, installed in wind 2003. Installed Agent 10.2.0.4.0 on AIX 6.1 on which Oracle AS 10.1.3.3.0. The Oracle AS itself is up and working fine. But after the agent install was done in the grid control it found the host but