How to download oracle fail safe

Hi,
where can I download oracle fail safe? Can I find it from otn or from edelivery or from support site?

http://www.oracle.com/technetwork/database/windows/downloads/index-093848.html

Similar Messages

Installation of oracle fail safe on windows cluster - plz very urgent

hi everybody,
this is the first time i am going to install oracle failsafe on windows clusters.
i am going to install oracle 9i release 2 software.
so i have to install the patches.
plz tell me with oracle cmds how to do the following.
1. after installing oracle 9i rel 2 how to install the patches to it in windows environment?
2. how to create oracle database on one node using shared disk for storage.
3. how to install oracle fail safe on each cluster?
4. how to configure cluster using fail safemanager?
plz provide me soln asap very urgent.
and don't forget to give me the soln with commands aqnd step by step.
plz plz plz
thanks in advance
suresh

For 9i , this is better:
http://download-uk.oracle.com/docs/cd/B10501_01/rac.920/a96600/toc.htm

How to configure OEM for a database which is under OFS(Oracle Fail Safe).

Hi,
We have customer who is using database 11g and also using OFS(Oracle Fail Safe) for switching to other machine if there is any problem with current machine. So how to configure Agent in this scenario.
What i have done is i have installed the agent on node1 and configured to monitor the database. it is monitoring properly. no issues.
But when database started from node2, here agent will not be there. Do i need to install the agent on node2 as well. Thanks in-advance for your support.
Regards
DBA.

Hi,
You need to a script and run it on os level. Here is an example:-
emcli relocate_targets -src_agent=agentmachine1.domain:3872
-dest_agent=agentmachine2.domain:3872 -target_name=RACDB
-target_type=oracle_database -copy_from_src -force=yes
-changed_param=MachineName:agentmachine2.domain
Regards
Jomon
Edited by: JohnJomon on Nov 17, 2011 2:27 PM

Why use oracle fail safe???

hi
i have one question..
why use oracle fail safe???
In the case windows HA System, our systems is operating Oracle database using only Windows Cluster (MSCS) without Oracle Fail Safe!!
Without oracle fail safe, our systems was installed Oracle database.....
if using oracle fail safe, how is merit???.
Thanks...

Hi Kim,
why use oracle fail safe???Refer http://download.oracle.com/docs/html/B12070_01/intro.htm#i1005996
Hope helps
Regrads,
Xaheer

11.5.9 + Oracle Fail Safe on Windows 2000

Hello, I need to know if Oracle E-Business Suite 11.5.9 is it certified against Oracle Fail Safe on Windows 2000, I just checked the certification matrix on metalink, but, there's no information about 11.5.9.
Thanks in advance,
Marco Correa
Technical Consultant
EP e-solutions
[email protected]

user4428447 wrote:
Can I Install Oracle Fail Safe with Oracle 11.1.0.6.0 on 64 bit Servers ? If Yes how otherwise what is the alternative ?
Yes ....
http://download.oracle.com/docs/cd/E16161_01/doc.342/e14976/toc.htm#insertedID3
http://www.oracle.com/technetwork/database/windows/index-082893.html
Regards
Rajesh

Error in Creating the Oracle Fail Safe Group during installation on MSCS

Hi All,
I am installing ECC 6 dual stack on MSCS.
I have done steps till CI installation as per installation guide.
I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
"Error occurred while working with configuration(scanning)
MSG:Error while connecting to the database"
I think it is not accepting the virtual hostname.
In our scenario CI is running CI node and DB instance is running on DB node.
I have followed the steps as per the installation guide.
Please let me know how to resolve this issue.
Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
Regards,
Dinakar
Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

Hi,
Thanks for your reply.
1) did you stop the CI before making the modifications as stated in the installation guide?
 Yes
2) is your database currently running on the same physical cluster node as your CI?
 No.Database instance is running on DB node and CI is on CI node.
3) is your database online?
 Yes,it is up and running
Please let me know if there is anyway to resolve this issue.
Regards,
Dinakar

Database control in a two node oracle fail safe cluster

os windows server 2003 r2
db 10.2.0.4
ofs 3.4.1
i've configured db control in the following
D:\oracle\product\10.2.0\db_1\BIN>emca -config dbcontrol db -repos recreate -cluster_name name_of_the_cluster
is this right?
next question
the -cluster flag and the -EM_NODE / -EM_SID_LIST parameters in the emca are only for rac?
with my configuration i can't login to my database over dbcontrol
Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1.blah)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ABBA)))

How to Configure the 10.2 DB Control in a Failsafe Environment
ID: 452305.1
HOWTO: PUBLISHED 17-OCT-2008
In this Document
 Goal
 Solution
 References
Applies to:
Enterprise Manager Grid Control - Version: 10.2.0.1 to 10.2.0.3
Information in this document applies to any platform.
Goal
The goal of the document is to provide the steps to configure the DB Console in an Oracle Failsafe environment.
Please note that the solution offered in this document is not certified by Oracle. It's only provided as a workaround for customers who wish to use this setup for the Database Control Console in a failsafe environment. Support for the procedure outlined in this document will be provided on a 'best efforts' approach.
As an alternative to this approach you can use Grid Control Agents to monitor a database in a failsafe environment. For more details please see:
Note 396659.1 How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
We assume the following:
- the database binaries are installed on each node on the local disk
- you already have a failsafe group with the database, the listener, disk resource, and virtual
ip/hostname
Note: This is specific for Windows environments using Oracle Failsafe. For setting up the DB Console in Active/Passive clusters on UNIX please use the following note instead:
Note 362524.1 Configure DB Control 10.2 for use in Active/Passive High Availability Environments
Solution
1. Drop the DB Control repository and configuration files on the active node:
<ORACLE_HOME>/bin/emca -deconfig dbcontrol db -repos drop
2. Recreate the DB Control using the virtual hostname:
- in a command window do the following:
set oracle_sid=<your_sid>
set oracle_home=<your_oracle_home>
set oracle_hostname=<virtual_hostname>
cd %oracle_home%\bin
emca -config dbcontrol db -repos create
-- make sure that the virtual host name was picked up by emca (it will display a summary screen
before continuing)
3. Verify that the DB Console works fine and can be accessed using the virtual host name in the URL
4. Stop the DB Console
5. Create a directory path on the group disk resource similar to your oracle home path on the local disk.
For example:
If the oracle home on the local disk is C:\oracle\product\10.2.0\db_1 and the shared disk is D:
then create the following path: D:\oracle\product\10.2.0\db_1
Copy C:\oracle\product\10.2.0\db_1\<hostname_sid> and
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
to D:\oracle\product\10.2.0\db_1\<hostname_sid> and respectively
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
Remember to change the values enclosed in <> with those in your environment.
6. Delete the following directories from the local disk
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
7. Create NTFS junction points from the local disk to the shared disk (these work like symbolic
links on UNIX) . It is your responsibility to create these.
You can find a brief guide as well as some tools that will help you create them at:
http://en.wikipedia.org/wiki/NTFS_junction_point
http://www.microsoft.com/technet ... dDisk/Junction.mspx
Important: Please note that this functionality is not certified nor supported by Oracle. Make sure you understand the
implications. Especially don't delete the junction points from Windows Explorer !!
In the end you should have the junction points on the local disk (with the same names as the
original directories) that would point to the directories you copied on the shared disk.
8. Start the DB Console service and verify that everything is still working fine.
9. Stop the DB Console service.
10. Move the Fail Safe group to the 2nd node.
11. Once the database is started, create the DB Console configuration files on the 2nd node:
<ORACLE_HOME>/bin/emca -config dbcontrol db
12. Stop the DB Console
13. Delete the created configuration files from the local disk:
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
14. Create junction points from the local disk to the directories already located on the shared
disk.
15. Start the DB Console service and verify that is working fine.
16. Add the DB Console service as a resource to the fail safe group and put dependencies on the
database and listener services.
17. Perform a fail over and see if everything works fine.
References
Note 298238.1 - Oracle10g Grid Control with Oracle Fail Safe
Note 362524.1 - Configure DB Control 10.2, 11g for use in Active/Passive High Availability Environments
Note 396659.1 - How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
Keywords
EMCA ; DB~CONTROL ; FAILSAFE ; DBCONTROL ; ENTERPRISE~MANAGER ;

How to download oracle database 11g in macbook pro

how to download oracle database 11g in macbook pro

When i download oracle database 11g using any other download manager it always fail the download and displays the error " Certificate verification error for profile.oracle.com:,Unable to establish SSL connection ,plz tell me which download manager i used for downloading oracle database 11g
Edited by: user10501953 on Dec 5, 2009 12:50 AM

Upgrade Oracle Database in Oracle Fail Safe configuration.

Dear All,
I usually upgrade Oracle Database (10g, 10g r2, 11g, 11g r2) in stand alone configuration without problems.
Now, I will must upgrade one database from 11g to 11g r2 in Fail Safe configuration.
Please, is there some link to read before this operation ?
Many thx.

Pl see if MOS Doc 223709.1 (How to upgrade or apply a patch to the RDBMS in an Oracle Fail Safe environment) can help
HTH
Srini

RMAN Automatic backup/recovery with oracle fail safe, windows cluster

Hello,
I have question,
1) Whether it is possible to do "RMAN Automatic Backup and recovery" in environment as ?
Environment: -
a. Windows clustering with windows server 2003 Enterprise Edition R2 (Two Node Clustering)
b. Shared disk ( RAID )
c. Oracle 10g standard edition one
d. Oracle fail safe v3.3.3 (for redundancy)
Here we have single oracle instance operating on single database whose files are located on shared disk.
2) If answer to above question is yes please specify if there is some good documentation to it.
Any help regarding this will be greatly appreciated.
Thanks in advance,
Rahul

You just need to make sure that the RMAN scripts are always able to connect to the target database instance whether instance runs on cluster node 1 or cluster node 2
here, If oracle services(resources) will shift from Node1 to Node2 (due to media or any failure) during RMAN Backup then there will be break in connection, will it destroy my backup or will it get started automatically without any harm?
and also I want to know,
Do we need to setup another server which will have RMAN backup script running?

How to download oracle 9i AS for windows NT on OTN

I do not know how to download oracle 9i Application server , to help me please by giving me various stages
Message was edited by:
[email protected]

elcaro wrote:
hi all,
In my company there is a forms 6i server, now we want to move it to a new server for upgrade operations. for now we want to install forms 6i version on windows server 2003. on quick search I found it for xp but none for windows server 2003. if I try to install xp version I got "javai.dll is not valid" error.What is the complete error message?
how can I download it ? Company has license information also. what should I do ? for ex should I open a SR on metalink or something like that ?Did you try this file? -- http://download.oracle.com/otn/nt/forms/6i_rel2_xp.zip
You may log a SR if this does not work.
Thanks,
Hussein

Win 2003 Cluster + Oracle Fail Safe + Dataguard (physical & Logical)

Hello, 
 
It´s my first post (sorry for my bad english)...I am mounting a high availability solution for test purpose. For the moment i mount the following and runs ok, but i´ve a little problem with the logical database: 
 
Configuration 
ESX Server 2.0 with this machines: 
Windows 2003 Cluster (Enterprise Edition R2, 2 nodes) 
* NODE 1 - Oracle 10gR2 + Patch 9 + Oracle Fail Safe 3.3.4 
* NODE 2 - Oracle 10gR2 + Patch 9 + Oracle Fail Safe 3.3.4 
c:/Windows Software 
e:/Oracle Software/ (pfile -> R:/spfile) 
 
Virtual SAN 
* Datafile, Redos.. are in Virtual SAN. 
R:/ Datafiles & Archivers & dump files & spfile 
S:/ , T:/ ,U:/ -> Redos 
V:/ Undo 
 
Data Guard 
* NODE3 Physical Database 
* NODE4 Logical Database 
 
The Oracle Fail Safe and windows cluster run OK, the switchs... 
The physical database runs OK... (redo aply, switchover, failover, all ok) but the logical receives the redos ok but it has a problem when goes to apply the redo. 
 
The error is the following: 
ORA-12801: error señalizado en el servidor P004 de consultas paralelas 
ORA-06550: linea 1, columna 536: 
PLS-00103: se ha encontrado el simbolo "," cuando se esperaba uno de los siguientes: 
(- + case mod new not null <an identifier>
<a double-quoted delimited-identifier><a bind variable><avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification><a number> > a single-quoted SQL string> pipe <an alternatively quoted string literal with character set specification> <an alternativel. 
update "SYS"."JOB$" set "LAST_DATE"=TO_DATE('11/09/07','DD/MM/RR'), 
 
This sql statement i saw in dba_logstdby_events and was joined with the error in alert log and dba_logstdby_events. 
 
I´m a bit lost with this error. I don´t understand why the logical database can´t start to apply the redos received from primary database. 
 
The database has two tables with two columns one integer and the other a varchar2(25). She hasn´t rare types of columns. 
 
Thanks a lot for any help, 
Roberto Marotta 

I recreate the logical database OK, no problem, no errors. 
 
The redo aply run ok. I have done logfile switch in primary database and they were applied in logical and standby databases. But... 
 
When I created a tablespace in primary database when i did a switch logfile in primary the changes transfers ok to standby database, but to logical NO!!!, the redo are in they path in logical ok, but when the process tried to apply, reports me the same error. 
 
SQL> select sequence#, first_time, next_time, dict_begin, dict_end, applied from dba_logstdby_log order by 1; 
 
SEQUENCE# FIRST_TI NEXT_TIM DIC DIC APPLIED 
--------- -------- -------- --- --- ------- 
138 14/09/07 14/09/07 NO NO CURRENT 
139 14/09/07 14/09/07 NO NO CURRENT 
 
SQL> select event_time, status, event from dba_logstdby_events order by event_time, timestamp, commit_scn; 
 
14/09/07 
ORA-16222: reintento automatico de la base de datos logica en espera de la ultima accion 
14/09/07 
ORA-16111: extraccion de log y configuracion de aplicacion 
14/09/07 
ORA-06550: linea 1, columna 536: 
PLS-00103: Se ha encontrado el simbolo "," cuando se esperaba uno de los siguientes: 
( - + case mod new not null <an identifier> 
<a double-quoted delimited-identifier> <a bind variable> avg 
count current exists max min prior sql stddev sum variance 
execute forall merge time tiemstamp interval date 
<a string literal with character set specification> 
<a number><a single-quoted SQL string> pipe
<an alternatively-quoted string literal with charactert set specificastion> 
<an alternativel 
update "SYS"."JOB$" set "LAST_NAME" = TO_DATE('14/09/07','DD/MM/RR'), 
 
The alert.log report the same message that the dba_logstdby_events view. 
 
Any idea¿? 
 
I´m a bit frustrated. It´s the third time that recreate the logical database OK and reproduce the same error when i create a tablespace in primary database, and i haven´t got any idea because of that.

Problem in Resource moving Oracle Fail safe

Hi ,
I have Os clustering Oracle Fail Safe configured here(10g enterprise Edition)
While Performin test ... cluster resources are not moving to another server due to which oracle database are not getting start on another cluster node ...
Plz help mee guys....

Hi Friend,
Please specify your Oracle Database version & Oracle Failsafe Version.
Please check the following :
1. When you configure a Fail Safe group, the most important information that you supply is the group name and the associated virtual server address.
2. The host name, database instance, SID entry, and protocol information must match on both cluster nodes and on each client system that is running Oracle Fail Safe Manager.
Hope it helps....
Thanks
LaserSoft

Oracle fail safe real time users

hello,
Please let me know about some oracle fail safe users
Thanks in Advance,
Rahul
Edited by: user10911629 on Jun 2, 2009 1:51 AM

hi rahul,
i think i have sent you some links and documents for oracle fail safe case studies...haven't they of any use?
you can refer oracle docs and can raise the SR with oracle support if you come across any issue and disaster recovery situation....
please check the documents i have given to you
and rather looking for customer case studies you should look for oracle fail safe specific doc as it is recommended by oracle, client or customer may adjust oracle fail safe architecture according to their environment, but oracle docs insist you to make environment required for oracle fail safe.
have a look for this oracle case study
http://www.oracle.com/technology/tech/windows/failsafe/pdf/fs32ds.pdf
thanks and regards
VD
Edited by: vikrant dixit on Jun 2, 2009 11:24 PM

How to download oracle bpm hotfixes

how to download oracle bpm hotfixes

You will need access to My Oracle Support to do so. See MOS Doc 780562.1 (How to download Oracle BPM (OBPM) patch (HotFix ) or patchset / maintenance or service Pack (MP / SP))
HTH
Srini

How to download oracle fail safe

Similar Messages

Maybe you are looking for