How to download os x v10.7
Hi, I bought the upgrade os x Lion in my macbook, but I want to know how to download it in my ipad, is that posible?
Of course not.
Your iPad runs iOS, not OS X.
Similar Messages
-
I cannot update my sync my iphone and macbook it keeps saying I need to download OS X v10.6 or better. I cannot figure out how to do it.
The 10.6 Snow Leopard DVD is back in the Apple online store. You can get it for $19.99. You will need to be running 10.6 to access the App Store. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
-
TS3212 How to download itunes on a mac os x 10.5.8
How to download itunes 10.7 on a mac os x 10.5.8
iTunes 7 requires 10.6.8 as a minimum. You need to upgrade or you cannot download iTunes 10.7.
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply. -
Please guide how to download mavervick
how to download mavervick
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR use a data cloning app to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy to return your Mac to its former working state.
Then, determine if your Mac meets ALL minimum system install requirements.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Next,
If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe could no longer secure their rights to continue to use Rosetta in later versions of OS X.
So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
Also, check for app compatibilty here.
http://roaringapps.com/
If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUoMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
Once you have determined all of this, you should be able to find the latest version of Mavericks by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
You can then begin the download and installation process of installing OS X 10.9 Mavericks from the Mac App Store. -
How to download os x 10.6
how to download os x 10.6
First, check that your machine is suitable for Snow Leopard. It needs to be a Mac computer with an Intel Core 2 Duo processor. Double check by reading the specs.
Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
This is a paid upgrade not a download. To buy the DVD, if you are from the USA go to …
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.
In Europe or otherwise substitute your national code in place of /us above.
In the UK see … Mac OS X 10.6 Snow Leopard - Apple Store (UK)
Before you start upgrading, back up your files. If you are unsure how best to do this, the following link is hugely informative. Most commonly used backup methods: Apple Support Communities
Once you have upgraded to Snow Leopard, the likelihood is the upgrade will take you to 10.6.3 and you will need to apply this Combo updater.
Mac OS X 10.6.8 Update Combo v1.1 and follow with software updates to pick up the most recent security and iTunes updates. -
How to download / read text attachment in Sender Mail Adapter IN XI
Hi
I would like to know how to download / read text attachment in sender mail Adapter & sent same attachment to target system using file adapter.
Please help how to design / resolve this concept.
Regards
DSRI would like to know how to download / read text attachment in sender mail Adapter & sent same
attachment to target system using file adapter.
Take help from this blog:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
From the blog:
However in most cases
our message will not be a part of the e-mail's payload but will be sent as a file attachment.
Can XI's mail adapter handle such scenarios? Sure it can but with a little help
from the PayloadSwapBean adapter module
Once your message (attachment) is read by the sender CC, you can perform the basic mapping requirement (if any) to convert the mail message fromat to the file format.....configure a receiver FILE CC and send the message...this should be the design...
Regards,
Abhishek. -
How to download Creative Cloud on new computer after deactivating on another computer?
I need to switch a Creative Cloud license from one computer to another. I deactivated the license via the CC Desktop App and then uninstalled it from the first computer. Now I want to download it on the other computer and activate. The Adobe website does not make it easy to figure out how to do that. Their standard help page only got me as far as deactivation from the first computer. Can someone tell me how to download it? The company I work for already has a license paid for.
Exactly the same way you did the 1st time... log in to your Adobe ID and start
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-Install, update or UNinstall, and launch after installing -
How to download the data which is in the table?
how to download the data which is in the table?
every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
can any one help me in this.
Phani.
Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AMOne way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
There u can downlaad the data .
The ither way is to use the code
The Following Code will be helpfull to You
Data :ITAB TYPE TRUXS_T_TEXT_DATA,
FILE TYPE STRING.
C_ASC TYPE CHAR10 VALUE 'ASC',
DATA: L_STATUS TYPE C,
L_MESSAGE TYPE PMST_RAW_MESSAGE,
L_SUBJECT TYPE SO_OBJ_DES.
DATA: L_FILELENGTH TYPE I.
PERFORM download_to_pc
TABLES
itab
USING
filename
c_asc
c_x
CHANGING
l_status
l_message
l_filelength.
FORM DOWNLOAD_TO_PC TABLES DOWNLOADTAB
USING FILENAME
FILETYPE TYPE CHAR10
DELIMITED
CHANGING STATUS
MESSAGE TYPE PMST_RAW_MESSAGE
FILELENGTH TYPE I.
DATA: L_FILE TYPE STRING,
L_SEP.
L_FILE = FILENAME.
IF NOT DELIMITED IS INITIAL.
L_SEP = 'X'.
ENDIF.
STATUS = 'S'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = L_FILE
FILETYPE = FILETYPE
WRITE_FIELD_SEPARATOR = L_SEP
IMPORTING
FILELENGTH = FILELENGTH
TABLES
DATA_TAB = DOWNLOADTAB
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
STATUS = 'E'.
CASE SY-SUBRC.
WHEN 1.
MESSAGE = 'gui_download::file write error'.
WHEN 2.
MESSAGE = 'gui_download::no batch'.
WHEN 3.
MESSAGE = 'gui_download::gui refuse file transfer'.
WHEN 4.
MESSAGE = 'gui_download::invalid type'.
WHEN 5.
MESSAGE = 'gui_download::no authority'.
WHEN 6.
MESSAGE = 'gui_download::unknown error'.
WHEN 7.
MESSAGE = 'gui_download::header not allowed'.
WHEN 8.
MESSAGE = 'gui_download::separator not allowed'.
WHEN 9.
MESSAGE = 'gui_download::filesize not allowed'.
WHEN 10.
MESSAGE = 'gui_download::header too long'.
WHEN 11.
MESSAGE = 'gui_download::dp error create'.
WHEN 12.
MESSAGE = 'gui_download::dp error send'.
WHEN 13.
MESSAGE = 'gui_download::dp error send'.
WHEN 14.
MESSAGE = 'gui_download::ubknown dp error'.
WHEN 15.
MESSAGE = 'gui_download::access denied'.
WHEN 16.
MESSAGE = 'gui_download::dp out of memory'.
WHEN 17.
MESSAGE = 'gui_download::disk full'.
WHEN 18.
MESSAGE = 'gui_download::dp timeout'.
WHEN 19.
MESSAGE = 'gui_download::file not found'.
WHEN 20.
MESSAGE = 'gui_download::dataprovider exception'.
WHEN 21.
MESSAGE = 'gui_download::control flush error'.
WHEN 22.
MESSAGE = 'gui_download::Error'.
ENDCASE.
ENDIF.
ENDFORM. "download_to_pc
At The End Reward points.
Please it's Required.
Thanks ,
Rahul -
How to download voice memos to pc from iphone 4.
how to download voice memos to pc from iphone 4.
Sync them as you would any other content from the computer to the device.
-
HT1320 how to download the music on my ipod classic to my pc
how to download the music on my ipod classic to my pc
Some of the information below has subsequently been summarized by turingtest2 in the post at https://discussions.apple.com/message/18842615
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797 -
I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.
Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?
-
How to download a file from a folder
hello frnds.. i've uploaded a file to a folder in tomcat server. Now how to download that file at the client side.. pls help me out... it would be better if you gimme the related code for it..
Create a link to it.
EG:
Link
Here I asked a similar question a while back. Link
Edited by: gtRpr on 2008/12/15 10:08 -
How to download file from application server
Hi Experts,
I developed report and execute in background mode. for this i used Open dataset transfer and close dataset . i got the requried output . But in this case user want downloaded file on presentation server so can anyone tell me How to download file from application server?
i know it is possible through Tcode CG3Y. but i want code in program.This code will download a file to your Client package by package, so it will also work for huge files.
*& Report ZBI_DOWNLOAD_APPSERVER_FILE
REPORT zbi_download_appserver_file.
PARAMETERS: lv_as_fn TYPE sapb-sappfad
DEFAULT '/usr/sap/WBP/DVEBMGS00/work/ZBSPL_R01.CSV'.
PARAMETERS: lv_cl_fn TYPE string
DEFAULT 'C:\Users\atsvioli\Desktop\Budget Backups\ZBSPL_R01.CSV'.
START-OF-SELECTION.
CONSTANTS blocksize TYPE i VALUE 524287.
CONSTANTS packagesize TYPE i VALUE 8.
TYPES ty_datablock(blocksize) TYPE x.
DATA lv_fil TYPE epsf-epsfilnam.
DATA lv_dir TYPE epsf-epsdirnam.
DATA ls_data TYPE ty_datablock.
DATA lt_data TYPE STANDARD TABLE OF ty_datablock.
DATA lv_block_len TYPE i.
DATA lv_package_len TYPE i.
DATA lv_subrc TYPE sy-subrc.
DATA lv_msgv1 LIKE sy-msgv1.
DATA lv_processed_so_far TYPE p.
DATA lv_append TYPE c.
DATA lv_status TYPE string.
DATA lv_filesize TYPE p.
DATA lv_percent TYPE i.
"Determine size
SPLIT lv_as_fn AT '/' INTO lv_dir lv_fil.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
EXPORTING
file_name = lv_fil
dir_name = lv_dir
IMPORTING
file_size_long = lv_filesize.
"Open the file on application server
OPEN DATASET lv_as_fn FOR INPUT IN BINARY MODE MESSAGE lv_msgv1.
IF sy-subrc <> 0.
MESSAGE e048(cms) WITH lv_as_fn lv_msgv1 RAISING file_read_error.
EXIT.
ENDIF.
lv_processed_so_far = 0.
DO.
REFRESH lt_data.
lv_package_len = 0.
DO packagesize TIMES.
CLEAR ls_data.
CLEAR lv_block_len.
READ DATASET lv_as_fn INTO ls_data MAXIMUM LENGTH blocksize LENGTH lv_block_len.
lv_subrc = sy-subrc.
IF lv_block_len > 0.
lv_package_len = lv_package_len + lv_block_len.
APPEND ls_data TO lt_data.
ENDIF.
"End of file
IF lv_subrc <> 0.
EXIT.
ENDIF.
ENDDO.
IF lv_package_len > 0.
"Put file to client
IF lv_processed_so_far = 0.
lv_append = ' '.
ELSE.
lv_append = 'X'.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = lv_package_len
filename = lv_cl_fn
filetype = 'BIN'
append = lv_append
show_transfer_status = abap_false
TABLES
data_tab = lt_data.
lv_processed_so_far = lv_processed_so_far + lv_package_len.
"Status display
lv_percent = lv_processed_so_far * 100 / lv_filesize.
lv_status = |{ lv_percent }% - { lv_processed_so_far } bytes downloaded of { lv_filesize }|.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING "percentage = lv_percent - will make it fash
text = lv_status.
ENDIF.
"End of file
IF lv_subrc <> 0.
EXIT.
ENDIF.
ENDDO.
"Close the file on application server
CLOSE DATASET lv_as_fn. -
how to download versions of apps compatible with OSX 10.7 not the ones updated for 10.9?
I'm trying to download iLife and iWork apps for my MacBook. For example: The GarageBand app will not download because it says it is compatible with 10.9. I have 10.7 and cannot update to 10.9 because I'm on a 13in. Late 2007 MacBook. Any suggestions?Click here and follow the instructions. If they’re not applicable, you can’t download them and need to install them from a DVD.
(108988) -
How to download the output of a report along with column header
Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = 'C:\1.txt '
FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = itab
FIELDNAMES = fld_tab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh
Maybe you are looking for
-
Problem with en0 on Mac Mini (mid 2011)
Hi all! I have a strange issue with the network (en0) on my Mac Mini: it just stops working after a seemingly random amount of time. I found this line in the system log (repeated hundreds of times): Mar 30 20:52:20 Kandinsky kernel[0]: AppleBCM5701Et
-
Explains it all ^
-
Does Contribute allow Admins to paste in (apply) source code to various Web pages? I've got a source code from Google Analytics I want to use for tracking and can't find how to apply it using Contribute.
-
Hi, We are executing BSP pages in two servers. The response time seems to be good in server A. When we execute the same page in server B it is slow. What are the key aspects we need to see to improve the performance. Offcourse,the physical memory in
-
Hi, My iphone Model A1387 EMC 2430 FCC ID:BCG-E2430A IC:579C-E2430A and i am unable to activate my iPhone shows SIM Not Valid and Only compatible SIM cards from a supported carrier may be used to activate iPhone.or visit a supported career 's store t