How to download SAP Conversion Agent 7.1 by Informatica

Hi Gurus,
I tried to download SAP Conversion Agent 7.1 by Informatica from following location
Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
but its showing No data available. Can anybody help me how to get this conversion agent.

Well, I see it like this and everything work for me:
Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations?

Similar Messages

  • How to download to SAP CONVERSION AGENT

    Hi,
    Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
    SAP Software Distribution Center
        Download
            Support Packages and Patches
                Entry by Application Group
    SAP NetWeaver ->
    is shows as Data unavailable.Request your help on this.
    Regards,
    Bhargav
    Message was edited by:
            bhargav gundabolu

    HI Bhargav
    Try out this
    SAP Software Distribution Center
    Download
    Support Packages and Patches
    Entry by Application Group
    SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
    It is working
    Thanks
    Abhishek Mahajan
    ***Please reward points if helpful**

  • SAP Conversion Agent

    Hi,
    I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
    1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
    2. It is a must to use the EDI message parsing templates provided in the CA library ?
    3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
    I have gone throught the help document. Please help me find answers for the above questions.
    Thanks,
    Hari

    Hi SreeHari,
    Please refer to the link below,which might help you.
    [SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
    Regards,
    Madhu

  • SAP Conversion Agent Studio Preview Version

    Hi,
    Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
    I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
    When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
    Are there newer version of the SAP Conversion Agent Studio Preview Version?
    Any suggestions are welcome.
    Thx
    Robert

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • XI supports EDIFACT without SAP Conversion Agent and others.

    Hello.
    Somebody knows the best way to convert EDIFACT message using XI?
    What I can do this without using softwares of conversion like:
    - SAP Conversion Agent;
    - Seeburger;
    - BIC Mapper and others.
    Thanks very much in advance.

    Hi,
    See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
    Here is the link for your reference:
    /people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
    http://www.stylusstudio.com/edi/EDIFACT_translate.html
    The steps to convert EDI to XML / XSD can be found at the following link:
    http://www.stylusstudio.com/edifact_to_xml.html
    Stylus studio download link: http://www.stylusstudio.com/xml_download.html
    Thanks and Regards,
    Chirag Gohil

  • Sender Mail Adapter with SAP Conversion agent

    have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
    it seems to ignore the attchment of the e-mail
    the sender configuration module tab is as follows :
    1.localejbs/AF_Modules/PayloadSwapBean transform
    2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
    3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
    The paramters are
    transform swap.keyName Content-Disposition
    transform swap.keyName Content-Description
    transform swap.keyValue attachment
    transform swap.keyValue codeco
    CM TransformationName ZIM_CODECO_VALIDATIONS
    The Convesion Agnet runs prefectly when using the Conversion Agent engine
    thx,Shai Rosenzweig

    check with tis may helpful for you
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
    Regds
    Abhishek

  • Urgent: IDOC to EDI with SAP Conversion Agent

    Hi,
    I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
    We have decided to use SAP Conversion Agent to deal the same.
    Can anybody share their experiences on this kind of scenario.
    Needed step by step information to complete would be appreciated with the full of points.
    Cheers.,
    E

    check with tis may helpful for you
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
    Regds
    Abhishek

  • SAP Conversion Agent: HL7 library project could not be executed

    Hi experts
    I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
    So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
    "Invalid service 'TEST'. Check service name and service database"
    Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
    <description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
    <time>N/A</time>
    </Event>
    </Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
    I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
    Do you have any ideas?
    Thx,
    manuku

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • SAP Conversion Agent - Performance Tuning

    Hi Experts,
    We are working with SAP Conversion agent..we have developed several scenarios on that...
    But, Now we are worried about the performance issues on the same.
    Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
    -S

    Hi,
    /people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
    Conversion Agent
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
    Thanks,
    Madhu

  • SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

    Hello
    I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
    In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
    Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
    Thanks
    Christoph

    Hi Mark
    Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
    C:\Documents and Settings\pi1adm>CM_console -v
    Engine-Version: 8.6.0(Build:30)
    Engine-Syntaxversion:4.00.10
    I will oben a ticket for that ...
    Regards
    Christoph

  • How to download SAP NetWeaver 7.01 - ABAP Trial Version?

    Hi Experts,
    Can anyone of you tell me how to download SAP NetWeaver 7.01 - ABAP Trial Version using SAP DOWNLOAD MANAGER?
    Thanks in advance,
    With kind regards,
    Kannan

    Hi Kanann,
    I downloaded it from here [http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2]
    Let me know if this information its ok for you.
    regards.
    Daniel

  • How to download SAP FrontEnd GUI Latest update C4 HF21 (6405.5.21.8936)?

    hello
    How to download SAP FrontEnd GUI Latest update C4 HF21 (6405.5.21.8936)?
    I try to open service.sap.com/swdc? but it is need authorization! if the authorizaion is needed, how to get it?
    Thanks
    Tom.lee

    Thanks Samrat !
    We have purchased SAP Frontend for windows6.4, The file version is 6400.2.1.2885, I think we were now customer of SAP, We want to get the patche C4 HF21 (6405.5.21.8936), If we can, Could you tell me how we can get the authorization! for /swdc or some other way to get the patche C4 HF21 (6405.5.21.8936).
    Thanks
    Tom

  • How to download sap gui 7.1?

    hi,all
    how to download sap gui 7.1?

    Hi,
    There is no SAP GUI for win available on ftp://ftp.sap.com/pub/sapgui/win/, anymore.
    You can find only that message:
    SAP GUI for Windows downloads
    SAP GUI for Windows CDs and patches are no longer available on this server.
    Please use the official download sites on SAP Service Marketplace (User-ID required).
    SAP GUI for Windows 7.10 CDs (Compilations) can be found here:
    http://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200615320200007657&V=INST
    SAP GUI for Windows 7.10 Patches can be found here:
    http://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200615320200007657&V=MAINT
    Cheers,
    Filip

  • How to register SAP CCM4x Agent on Solaries platform?

    Hi,
    Could any one tell me that how to register SAP CCM4x Agent on Solaries Platform?
    Thanking you
    Regards
    Pranav

    Check the documentation
    http://service.sap.com/monitoring
    There you will find guides how to set up your scenario.
    Markus

  • HOW TO DOWNLOAD SAP OUTPUT TO EXCEL FILE

    Hi SAP Gurus,
        I would like to ask if you have any Function Module or codes on how to download SAP Output into Excel file. Thanks! Hope you could help me.

    You can transfer the contents of internal table to excel using this code..
    data: begin of itab occurs 0,
          vbeln like vbak-vbeln,
          posnr like vbap-posnr,
          end of itab.
    select vbeln
           posnr
           from vbap
           up to 20 rows
           into table itab.
    * EXCEL sheet using OLE automation.
    INCLUDE OLE2INCL.
    * handles for OLE objects
    DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
          H_WORK  TYPE OLE2_OBJECT,
          H_SHEET TYPE OLE2_OBJECT,
          H_CELL  TYPE OLE2_OBJECT,
          V_COL   LIKE SY-TABIX.     " column number of the cell
    DATA:
      V_STEP(30),
      V_FILE LIKE RLGRAP-FILENAME.
    * tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
    *           PERCENTAGE = 0
               TEXT       = 'Creating Excel...'
           EXCEPTIONS
                OTHERS     = 1.
    * start Excel
      V_STEP = 'Starting Excel'.
      CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
      PERFORM ERR_HDL.
      SET PROPERTY OF H_EXCEL  'Visible' = 1.
    *  CALL METHOD OF H_EXCEL 'OPEN' EXPORTING  #1 = 'C:DMC_REC.XLS'.
    *  PERFORM ERR_HDL.
    * tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
    *           PERCENTAGE = 0
               TEXT       = 'Adding Data to Excel...'
           EXCEPTIONS
                OTHERS     = 1.
    * Get the list of workbooks
      V_STEP = 'Preaparing Excel'.
      CALL METHOD OF H_EXCEL 'WORKBOOKS' = H_WORK.
      PERFORM ERR_HDL.
    ** Add new workbook (create a file)
      CALL METHOD OF H_WORK 'ADD'.
      PERFORM ERR_HDL.
    * Get the created worksheet
    ************************Sheet Number
      CALL METHOD OF H_EXCEL 'WORKSHEETS' = H_SHEET EXPORTING #1 = 3.
    ************************Sheet Number
      PERFORM ERR_HDL.
    * Activate (select) the first sheet
      CALL METHOD OF H_SHEET 'ACTIVATE'.
      PERFORM ERR_HDL.
    * tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
    *           PERCENTAGE = 0
               TEXT       = 'Adding Data to Excel...'
           EXCEPTIONS
                OTHERS     = 1.
    * output column headings to active Excel sheet
      V_STEP = 'Adding data to Excel'.
      LOOP AT ITAB.
        V_COL = SY-TABIX.
        PERFORM FILL_CELL USING 1 V_COL ITAB-vbeln.
        PERFORM FILL_CELL USING 2 V_COL ITAB-posnr.
      ENDLOOP.
      V_STEP = 'Releasing Excel'.
      FREE OBJECT H_EXCEL.
      PERFORM ERR_HDL.
      H_EXCEL-HANDLE = -1.
    *&      Form  ERR_HDL
    *       text
    *  -->  p1        text
    FORM ERR_HDL.
      IF SY-SUBRC <> 0.
        WRITE: / 'Error in processing Excel File:', V_STEP.
        STOP.
      ENDIF.
    ENDFORM.                    " ERR_HDL
    *&      Form  FILL_CELL
    *       text
    *      -->P_1      text
    *      -->P_1      text
    *      -->P_1      text
    FORM FILL_CELL USING  ROW COL VAL.
      CALL METHOD OF H_EXCEL 'Cells' = H_CELL
                     EXPORTING #1 = ROW #2 = COL.
      PERFORM ERR_HDL.
      SET PROPERTY OF H_CELL 'Value' = VAL .
      PERFORM ERR_HDL.
    ENDFORM.                    " FILL_CELL

Maybe you are looking for