How to drag and drop files in Time Machine Capsule?

Hi, all
I have recently bought a Time Machine 2 TB. I have backed up my MacBook Air over the Time Machine. I was trying to copy or drag and drop files in the time capsule, but it wont allow me. It Neither does allow me to create any new folders in the Airport Time Machine. If i try to drag and drop files in it, it says, click to Authenticate, however, there is no place or tab to authenticate. I am the administrator.
Please advise.
Thanks

It sounds like you are trying to copy / paste files to the Time Capsule Finder icon, when you should be copying / pasting to the drive on the Time Capsule, which is named "Data" unless you have changed it.
Open any Finder window and look for the Time Capsule icon under the Shared heading on the left side of the window
Click on the Time Capsule, which will display a folder to the right named Data, unless you have changed the name of the drive
Double-cllick on Data to mount the drive on the desktop
You can drag / drop or copy / paste files onto the drive icon, or open the drive and drag files into the open window.
The first time that you do this, you may be asked for the Time Capsule device or disk password.

Similar Messages

How to drag and drop files between two JFileChooser

Sir i want to drag and drop files between two JFileChooser i don't know how to do that. So is there any reference code for that so that i can able to do it. I have enabled setDragEnabled(true) for both the jfilechooser now i don't now how to drop files in them means drag file from one jfilechooser and drop it to another JFileChooser,.
Plz help me this is the requirement in my project.

Note: This thread was originally posted in the [New To Java|http://forums.sun.com/forum.jspa?forumID=54] forum, but moved to this forum for closer topic alignment.

How to drag and drop file between maximized windows in Awesome WM ?

Hello,
I am newbie to awesome WM. I am a web developer and usually need to edit files after downloading from FTP. I am using filezilla for FTP and sulblime text 2 for coding.
How can I drag file from filezilla and drop into sublime window for editing when both windows are maximized? Is it possible? Same way sometimes I also need to drag file from nautilus to filezilla for uploading to FTP server?
I would be thankful if somebody can guide me to make it possible.
Thanks.

Belgarath wrote:
I have a similar problem in FLuxbox.
I can not drag a file from Thunar to any aplication.
I can "half solve" this problem in this manner:
Drag a file from a ubication, press ALT + TAB to switch between programs and then drop it inside.
My problem is that Fluxbox not change from one window to another when you put a file over the taskbar. I do not know if Awesome WM can switch between applications using ALT + Tab but it is the idea.
Luck with it.
No awesome wm can't switch between applications when file is dragged using ALT + Tab or MOD4 + Tab and that's the problem.

HT2518 how do i or can i drag and drop files from one external drive to another ???HOW

how do i drag and drop files from one external drive to another, i cannt get both drives to open up. only one at a time.. i have alot to learn i know but that is where i am at the time...

You posted here so would assume you are also talking about running Windows.
Are the drives NTFS and use on Windows?
Are they Mac HFS formatted?
You likely will need NTFS for OS X in one case. to mount PC and use under Mac OS Lion
MacDrive to mount and WRITE to HFS drives under Windows

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

How to drag and drop a object in an indicator at run time?

How to drag and drop a picture at run time in a indicator displaying pictures on the front panel. The main thing is that the window is displaying frames continuously?

Hi Vivman,
You have duplicated this post here. Please do not post the same question to separate forum post.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

How to drag and drop a picture at run time in a window displaying pictures?

How to drag and drop a picture at run time in a window displaying pictures on the front panel. The main thing is that the window is displaying frames continuously?

vivman,
So from your description you have a picture control where you've already created an image and you'd like to drag an image around inside of the picture control. This can be done although it is going to take a significant amount of research and programming on your behalf. You can use the drag event in the event handler to find out when the drag occurs and where the cursor is. Then edit the picture as you move your mouse so that when you drop the picture gets updated.
The even structure is a somewhat advanced topic and the drag and drop feature is one of the more advanced uses of this structure. I would search the example finder (help>>find examples) for "event" and "drag" to see how to use these events. Also you'll want to look at the examples for the picture control.
Sounds like a cool project! Check out Darren's Weekly Nugget 10/30/2006 this topic (http://forums.ni.com/ni/board/message?board.id=170&message.id=212920). It might prove useful.
Good luck!
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Hi, im currently using an windows 8 computer and have installed itunes 11.5. My problem is i'm trying to transfer one song from my computer to my iphone. But some how i cannot drag and drop like last time itunes 10.x.

Hi, im currently using an windows 8 computer and have installed itunes 11.5. My problem is i'm trying to transfer one song from my computer to my iphone. But some how i cannot drag and drop like last time itunes 10.x. I do not wish to sync as it means of deleting my entire song list from my phone just to transfer 1.

" I ordered the Snow Leopard software and tried installing it, but it stopped and said to clean the disk."
First off, your installation disc is in all likelihood faulty.
This has been a known issue in the past:
Faulty Snow Leopard install discs - Apple has no timeline on ...
http://store.apple.com/us/help/returns_refund#policy:
*You can return software, provided that it has not been installed on any computer. Software that contains a printed software license may not be returned if the seal or sticker on the software media packaging is broken.

I dragged and dropped files to my time capsule from my laptop but now I cannot find them anywhere on there... Please help

I dragged and dropped files to my time capsule from my laptop but now I cannot find them anywhere on the time capsule... Please help I no longer have that laptop. All it is showing is time machine backups.

Open Macintosh HD and look for your Time Capsule icon under the SHARED heading on the left side of the window.
Click on the Time Capsule icon and folder will appear to the right representing your drive
Double click the folder to reveal the contents
You should see a xxxxxx.sparsebundle file for each computer that is backing up and the files that you dropped onto the Time Capsule from the other computer. Leave these files alone.
If you do not see the other files, unfortunately, they are not there.

Can't drag and drop files into Attachments while in Administrator mode

I can drag and drop files into attachment easily when I'm not in Administrator mode. But I need to be in Administrator mode at work and therefore for some reason I cannot drag and drop files into attachments; I'm forced to manually search and select particular files for attaching, which significantly slows my day-to-day work.
Is it a bug?
I have the up-to-date version of Thunderbird and I use MS Windows 7 Ultimate.
Any help would be highly appreciated.
Thx

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Drag and Drop Files Onto Seagate External Hardrive

I can't seem to just drag and drop files I want to store on an external hardrive with Seagate. I hate that. I just want a simple drag and drop so I can free up some space on my computer. But Seagate just seems to just seems to say **** you, we're gonna do it backwards ***. Can someone please explain how to just drag and drop files? I have zero idea, and they don't make it simple to understand.
So for the love of god....please explain it to me (without use of computer terminology or telling me places I should go on my computer that I don't know what the **** they are. Renders your help useless, and it's frustrating because no matter how many times I ask this, you just give me help i can't understand anyway.)
Please....it's not hard to ask.
If possible, use step by step instructions, if you need to tell me to go somewhere on my computer, tell me where that is too so I know where to go. Don't be vague, I can't understand vague instructions when i read them.

What is the drive formatted as? this is extremely likely the issue.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Cannot drag and drop files in Finder on Yosemite 10.10

This is basically exactly as it sounds. I just discovered that I can't drag and drop files in the Finder anymore for some reason. I've restarted 3 or 4 times since upgrading, and I've reset the SMC and PRAM already. Because of this, I can't update an application I'd like to. Copying the application does not work either; the paste option is greyed out It's not just applications; click-and-drag and three-finger drag simply don't drag the file. It is not happening invisibly either; going through the motions and dropping the file on Applications yields no result.
I searched the Web for this but didn't find anything similar for Yosemite. If anyone has a suggestion or the same problem, I would love to hear it.

For two days I tried everything I could to get the drag and drop to start working again in Yosemite on my MacBook Pro Retina. I even re-installed the OS via Disk Recovery. I wound up at the Apple Store where they couldn’t find the bug either, but we did the following and I am back up and running. There is a bit of a downside, so please read all the way through.
I have no idea if this will help you, but if you log in under a GUEST account and this drag and drop issue is NOT there - then try this. For whatever reason this bug was localized to just my single user settings Library. The GUEST account could drag and drop fine. Weird. Anyway, here’s what we did at the Apple Store that has kept me up and running….
Create a new user
Logout (deactivates the busted user library) and then login as that new user.
Enable Root User (superuser) while logged in under this new user. YouTube has some 1min. videos on how to do this.
Navigate to the Library (which is usually invisible) listed under your original admin user account.
Rename this folder. I just added ORIGINAL to it.
Also, create an alias for this folder and leave it there.
Go turn off Root User and log out.
Now, when you log back in under your usual User Acct. the system can’t find the Library system folder (because you renamed it) so it creates a fresh one. This new Library folder will still be invisible to you, but should work.
This fixed my drag and drop problem.
What this does though is kill all of your plists, saved website passwords, bookmarks, application settings, etc. for everything. I mean everything. Which kind of stinks.
This is why we created the alias in Step 05, click on it and you can open your ORIGINAL Library folder and drag out the files as you need them. I guess one day I'll drag over the one setting that borked my machine, but I haven't found it yet.
This is certainly not ideal and may not even be the best solution. But it got me up and running with no loss of files, just slows me down as I have to re-populate all my log-ins, etc.
Hopefully someone will come up with a better fix or patch.
Hope this helps.

Drag and drop files to library on a Mac

Does anyone know how to do this? I feel silly asking how to drag and drop...yet it doesn't appear to be allowed on my Mac. I don't want to import to library because I import a lot of PNGs most of the time and Flash creates symbols for me (again, only on a Mac, not a PC). Is this some sort of ploy from Adobe to get Flash designers off Macs? I just think using Flash on a PC is MUCH more user friendly than on a Mac. There are other reasons I think this.
Anyway, if there is a way to drag and drop to the library, I'd love to hear it. thanks for any help!

Hi,
So, I assume you are dragging and dropping objects from your machine directly to Library pod or to your Slide.
Are these images/sounds located on network?
No, on the same drive (c:).
Try Closing Captivate and Right Click--Run As -Administrator and check if it is still doing the same behaviour on a enw project.
I've tried this. Same result.
Usually when you drag and drop an object -- if it is movable to destination is shows a small "+" and if not it shows "x" next to the faded dragged object.
Can you please try these and if it still happens, can you add some more information?
I've tried to drag and drop simple files, like jpg, mp3, swf... what ever. Nothing works. I've got the same problem on my home office system, wich is totally different to my working station here. My colleague here in my room has pretty the same system, and it works fine.
Windows 7 (32 bit), CP5 installed, CS4 installed, CS 5.5 installed, CP5.5 installed
What else you wanna know?

Drag and drop Files to native disk lazily

I need help on how to copy, through DnD, a file/attachment from an email application (http://columba.sf.net) to the native operating system. Theres no problem to drag and drop files that already resides on the file system, this Ive done without any problem.
The problem is that the attachment lies within the email, and it needs to be extracted before it can be copied to the correct location. For performance reasons I dont want to extract all attachments to the disk when the user opens an email with attachments. Neither do I want to extract the attachment during the user's DnD operation. I would like to make the copy/extraction when the DnD has been completed.
As Ive understood is that when I want to DnD a file to the desktop, I must have a Transferable that supports the DataFlavor javaFileListFlavor. This will return a List of Files by the getTransferData() method. But the problem is that the Files must exists on the diskdrive before it the DnD starts, ie before the getTransferData() method is called.
This I cannot do, since I the getTransferData() method is called multiple times during the DnD action, and I dont want to extract the attachment until the DnD is complete. (performance issues)
My first idea was to create an empty dummy file on the disk, and use this as the source File to be dragged around. Then when the DnD is completed, I would extract the attachment from the email and make the copy manually. Doing it this way, Im sure that
* theres no unecessary extraction,
* the user doesnt have to wait until he has choosen where to put the file
* the extraction is done according to the API for the email client.
But as it seems now, theres no way of knowing the location of the drop target from the TransferHandler or the DataFlavor. And if I dont know the location of the drop, I cannot make the manual copy.
Do anyone know of a solution or workaround, using the new or old DnD implementation?
ANy help is appreaciated!

Hi RedSolo! I've been working with the exact same problem for quite some time. I think your "workaround" in the frappucino module seems to be the best way to solve this problem. I have almost the same solution in my project. What I would like to do is to present a progressbar during the time it takes to wait for the "create files thread" to finish. But I haven't found a solution since I'm blocking the event thread. Do you have any tips or ideas how to solve this?
Thankful for any ideas!!

How to drag and drop another swf or fla into a template?

I am building a flash website for a friend. We are using templates he purchased at flashden.net.
I normally use wordpress, joomla and other such systems and am familiar with html, php, cgi and such.
This is my first time dealing with a flash template.
I have downloaded the trial version of the software and he wants to purchase adobe flash professional for me
So that we can edit the template and add features he wants in the future.
The website that sells the templates says you can easily drag and drop addons to templates in flash
but I am not finding it so easy. Is there somewhere online where I can find a tutuorial on how to step by step
drag and drop flash files into another template etc.?
Also, where can I find good tutorials in general? I have downloaded adobe flash for dummies it is not as indepth as I need
to get a handle on this software.
Thank you to anyone that offers me any advice,
David Doherty

Ned,
Thank you for responding.
Flashden.net does claim its a simple drag and drop operation to do this but they have little to know information on the site about the subject and
having difficulty with the sellers on step by step instructions. They claim it's easy it may be.
The person I am building the website for had a bad experience with one of the sellers who refused to offer anything but basic instructions and claimed the cost of the software was not worth his time.
Here are the instructions that were provided:
Open news_rotator.fla
Go to library.
Select and copy NewsRotator movie clip.
Paste it into your own project’s library.
Now, you can drag and drop it into your own movie clips.
Use news.xml to add/remove headlines.
As you can see from what your telling me this is insufficent information on how to drag and drop this flash into another flash template.
I will attempt to contact other selers at flashden for information as I have other flash templates we have purchased.
Thank you,
David Doherty

How to drag and drop files in Time Machine Capsule?

Similar Messages

Maybe you are looking for