How to draw horizontal line in smartform after end of the all line items

Hi Friends,
I am working on the smartform. I have created TABLE node in Main window.
i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
Could you please help me how to resolve this issue.
FYI: I tried with the below two options. But no use.
1. desinged footer area in the table node of the main window.
2. tried with uline and system symbols.
please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
this is very urgent.
Thanks in advance
Regards
Raghu

Hello Valter Oliveira,
Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
Could you please tell me how to insert blank line text.
1 - in your table, create a line type with only one column, with the same width of the table
2 - in table painter, create a line under the line type
3 - insert a blank line text in the footer section with the line type you have created.

Similar Messages

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can i download and install lightroom after having formatted the hard disk?

How can I download and install lightroom after having formatted the hard disk?
I have the number of the order.

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

HT4623 hey,my iphone (5) is in recovery mode so I downloaded ios 7 from the laptop then after the download was completed the laptop was extracting the software and at the end of the loading line it writes an unknown error occurred (3194) please help me th

he download was completed the laptop was extracting the software and at the end of the loading line it writes an unknown error occurred (3194) please help me thank you

3194 = https://discussions.apple.com/message/18851577#18851577

Trying to publish an event to fb from iPhoto '09, 8.1.2. Getting error message: "Line 22: Opening and ending tag mismatch: meta line 0 and head".

Trying to publish an event to fb from iPhoto '09, 8.1.2. Getting error message: "Line 22: Opening and ending tag mismatch: meta line 0 and head". Never had any trouble before. What in the world?

See if you can export those same photos to a folder on your Desktop.
OT

How do I start an app using transset-df with the command line?

I'm using openbox and have found that I can make xfce4-panel transparent using transset. The only problem is that I have to run "transset" and then click on the panel every time. Is there a command I could just type in to the command line that would start xfce4-panel with .75 transparency? I could then add that to my autostart.sh file and all would be good and dandy.
What I was thinking is maybe there's a command like
transset-df .75 xfce4-panel
that starts up the panel with 75% opacity. Obviously that doesn't work because I tried it. I also read something about using a script, but I don't know how to write those. Perhaps there is a way to set it so whenever xfce4-panel is started, transset-df sets it at 75% opacity? How would I go about doing this?
Last edited by Redrazor39 (2009-06-11 15:15:19)

Openbox seems to be doing a 'tidy up' of all windows after autostart.sh completes.
This would be fine, except for the fact that the tidy up re-renders every window and while it does so it re-sets transparency as part of the same process.
So, to get your xfce panel to stick at the transparency setting you apply with transset-df, you need to ensure the transset-df is done after autostart.sh finishes.
The easiest way to achieve this is to create a small script, say in /usr/local/bin
# /usr/local/bin/openbox-xfce-panel-transset
# Set xfce4-panel transparency after safe delay
sleep 1
transset-df -n "xfce4-panel 4.6.1" 0.75
Add a call to this as the last line of your autostart.sh
# Set xfce4-panel transparency after autostart.sh has exited
openbox-xfce-panel-transset &
Regards,
Mike
Last edited by bluearcus (2010-01-08 19:25:56)

How to login in command line by adding user/password in the same line

is it possible in OSX to login in terminal by typing:
+login username password+
I tried many unix command and never find a command that can do that in one line, it always ask for the password in the second line.
I need that to be used in Python application,
or if there any possibility to write code in python to do that in OSX using python osx modules,
while in windows it worked perfect by using win32API in Python.
I hope Apple developers can help me with That
Thanks

This isn't possible because it would be a terrible security vulnerability--any process on the system can see a program's command line arguments. (Just type "perl -e 'sleep 5' & ps" in a terminal if you don't believe me.) If you want to log in like this, you'll have to open the "login" program in such a way that you can give it the password through its standard input.
Also note, however, that "login" will not change the account your Python program is running as; it just starts a shell running as that account. If you want your program to run as a different user, you need to look into a set of commands and techniques called "setuid" or just "suid"; a Google search for "setuid python" should get you started. (I'm not a Python programmer, so I can't really tell you exactly how setuid works in Python.)

How do i prevent restoring my iphone4 after updating to the new ios?

I decided tonight to finally update to the new version of ios7. I already updated to 7 when it came out but have been avoiding the newer versions of it...until tonight. After it loaded the update and tried turning on, it showed the charger chord inserted into itunes. So i did just that. But then itunes told me that my phone needed to be restored!!!! Holy ****!!!!!! Im going to lose all of my photos. So many memories. I cant lose them...I'm so upset with apple. This is the third time something like this has happened. When you update your ios, youre not supposed to lose any data! Is there ANYTHING i can do? I really need your help, guys. Will everything still be there if i downgrade to the older ios? And if so, how do i do that? I'm so technologically challenged. But I will tell you, I'm never buying an apple product ever again after all this.

If this is the third time that this has happened to you, I don't blame you for being upset. On the other hand, after the second time, you should have learned the importance of backing up your iOS devices and apparently you didn't do that or you wouldn't be in such a panic.
You cannot downgrade the iOS, You have to restore your phone now and all of the contents will be erased. I think you know that though, and I think that you know that there is no way around it either.

HT4314 how do I turn off a game after playing so the app won't run down my battery?

How do I turn off a game after playing it so the app won't run down the battery. This has happened 2x and I have had to reset my phone.

To completely close an app (though a lot of apps don't remain active when you switch into a different app or go to the homescreen) : from the home screen (i.e. not with the app that you want to close 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

A few seconds after render finishes, the red line re-appears above timeline.

Hello
I am editing a video consisting of still pictures (jpgs) on Premiere Pro CC 2014.
I am using dynamic link with After effects in order to add some animation effects on the still images (sky replacement, puppet, projection etc..)
After doing some work on AE, when I get back to Premiere, a red line appears above the timeline, meaning that I must render that clip (which was just worked on in AE)
Recently the performance while rendering became very slow (rendering inside Premiere by pressing "Enter" on the keyboard)
I just waited several hours for it to finish rendering a part of my clip. It finally finished.
I then played the video and it was running smoothly.
However, after a few seconds, without me doing any changes !!! suddenly the red line above the timeline reappeared.
And now, the video seems to be un-rendered, and it is either not playing or getting stuck all the time.
Does anyone have any idea what could be causing this?
This is extremely frustrating and looks like something is terribly wrong with Premiere.
screenshot is attached.
Thanks,
Tal

I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

How can you get your phone turned back on if the main line phone is being worked on?

My brother shattered his phone & his phone is the main line so my service is off. Is there anyway to get it turned back on?

Hello soccergril2013,
If you unable to get your iPhone to show up on your computer, then pick on of the articles below that goes with the type of computer that you are using. Each article will have you look at using different cables and checking drivers.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591
Regards,
-Norm G.

How to enable telemetry logs and where can i find the command line for sun

Hi i tried creating the telemetry logs directory but the logs are not being populated. i created the following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.
Also pl. tell me where can i get the command list for sun one messaging server to use the command line utility to list, delete mailboxes. also can i search for all the mailboxes under one domain name. if yes then which command i have to use.
thanks in advance.

Hi,
Hi i tried creating the telemetry logs directory but
the logs are not being populated. i created the
following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.Make sure the permissions (ownership) on the user directory and the sub directory match those that messaging server uses - by default mailsrv:mail. This is the most common cause of the telemetry data not being created. The other thing to verify is that the user's account isn't stored as user@domain, otherwise you may need to create the directory as the entire user@domain (try both just to be sure).
Also pl. tell me where can i get the command list
for sun one messaging server to use the command line
utility to list, delete mailboxes. also can i search
for all the mailboxes under one domain name. if yes
then which command i have to use.The Messaging Server reference guide is a good place to start (lists all the command-line utilities/flags and what-not):
http://docs.sun.com/app/docs/doc/819-4429?l=en
The mboxutil command is used to list/create/delete mailboxes and you can use a pattern to only list those mailboxes in a specific domain.
Regards,
Shane.
thanks in advance.

How I can set my default browser mozilla firefox from the command line in Windows 7?

I need to set my default browser mozilla firefox from the command line, ie without using the GUI.

'''-setDefaultBrowser''' is the correct command - you need the two capital letters.
Why Firefox 17.0.1? You would be missing a number of important security updates. Firefox 17.0.'''9''' is the current ESR release version.

How to check for physical damage on a disk using the Command Line

I have a startup disk that I suspect of physical damage. The symptoms is that the server (10.4.7) would "hang" randomly, about once a day. I have already changed it and restored from a backup, and now everything is fine. However just out of curiosity are there any command line utilities to do a physical surface scan of the drive, like TechTool Pro but included in Mac OS X Tiger?
G4 Dual 1.42 Ghz Mac OS X (10.4.6)

Extract from the Command Line Guide for Tiger Server:
Checking for Disk Problems
You can use the diskutil or fsck command (fsck_hfs for HFS volumes) to check the physical condition and file system integrity of a volume. For more information, see the related man pages.
MacBook Pro Mac OS X (10.4.7)

How to draw horizontal line in smartform after end of the all line items

Similar Messages

Maybe you are looking for