How to draw texture NO SCALE in OpenGLES????

Hi, guys
I have a texture, 128*128
I want to draw it to a 68 * 98 rectangle. I do not want the texture to be scaled
Plz tell me what I should do.
Thx

So you want to display only a part of the texture? In this case you need to set the right texture coordinates to the vertices.

Similar Messages

How to draw text to scale in actual inches?

When I set my document to draw text in inches and then outline the text, its usually smaller than what it was supposed to be. How do I set it to draw to an accurate size while still in edit mode (not outlined)?

It is exactly the size it is supposed to be. When you enter a type size, it is not the height of the capital letters, it's the distance from the tallest ascender to the lowest descender.
all the text below is 12 point
the only way to get what you want is to figure out the point size at which the capitals will equal .5 inches - as you can see, this point size will vary depending on the font.

How to Draw table in SAPscript ???

Hi all Guru of SAPScript!
I want to draw a table with column and row in SAPscript. Who can help me step by step?
Thanks!
Edited by: kathy a on May 6, 2008 11:53 AM

Hi,
Use BOx Syantax How to Draw table in SAPscript ??? Pls Read the description
Syntax:
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP/4 numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measure: The following units of measure may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
Examples:
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION
Syntax:
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words as a value which specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN: Origin of the coordinate system.
WINDOW: Sets the values for the left and upper edges to be the same of those of the current window (default setting).
PAGE: Sets the values for the left and upper edges to be the same as those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
Examples:
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE
Syntax:
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT: Dimensions of the rectangle or line.
WINDOW: Sets the values for the width and height to the values of the current window (default setting).
PAGE: Sets the values for the width and height to the values of the current output page.
Examples:
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Reward Helpfull Answers
Regards
Fareedas

How to draw a simple little line.

I have a JApplet that loads images from a jar file. This applet can scale the images, and move them left right, up and down.
I just want to be able to draw a line on top of the images and then erase it if needed. How do I do this?
Currently, I have a the jpg images loaded into an Image, which is then converted to an ImageIcon, which is then used to create a JLabel, which is used to create a JScrollPane which finally gets added as a tab on a JTabbedPane.
I was told to use BufferedImage but that didn't help me. Here is what I have currently:
private void draw()
//Get the current image to draw on
JScrollPane jsp = (JScrollPane)m_tabbedPane.getSelectedComponent();
JViewport port = jsp.getViewport();
GrabAndScrollLabel gnsLabel = (GrabAndScrollLabel) port.getView();
ImageIcon ii = (ImageIcon) gnsLabel.getIcon();
BufferedImage bi = new BufferedImage (ii.getIconWidth(),
ii.getIconHeight(),
BufferedImage.TYPE_INT_RGB);
Graphics2D g2 = bi.createGraphics();
g2.setPaint(Color.blue);
g2.drawLineRect(100, 200, 300, 500);
g2.drawImage(ii.getImage(),null,null);
ImageIcon newIcon = new ImageIcon(ii.getImage());
gnsLabel.setIcon(newIcon);
port.setView(gnsLabel);
jsp.setViewport(port);
getRootPane().revalidate();
getRootPane().repaint();
Please help. I can't believe it has to be this difficult to draw a little line.
Thanks.

I have a little more insight into my problem.
I built a sample form Sun (the Map_Line sample). It looks like this:
public class Map_Line extends Applet
private BufferedImage bi;
public Map_Line()
setBackground(Color.white);
Image img = getToolkit().getImage("bld.jpg");
try
MediaTracker tracker = new MediaTracker(this);
tracker.addImage(img, 0);
tracker.waitForID(0);
catch (Exception e)
int iw = img.getWidth(this);
int ih = img.getHeight(this);
bi = new BufferedImage(iw, ih, BufferedImage.TYPE_INT_RGB);
Graphics2D big = bi.createGraphics();
big.drawImage(img, 0, 0, this);
public void paint(Graphics g)
Graphics2D g2 = (Graphics2D) g;
int w = getSize().width;
int h = getSize().height;
int bw = bi.getWidth(this);
int bh = bi.getHeight(this);
g2.drawImage(bi, null, 0, 0);
g2.setColor(Color.white);
g2.setStroke(new BasicStroke(5.0f));
g2.drawLine(10, 10, bw - 10, bh - 10);
public static void main(String[] s)
WindowListener l = new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
Frame f = new Frame("Map_Line");
f.addWindowListener(l);
f.add("Center", new Map_Line());
f.pack();
f.setSize(new Dimension(350, 250));
f.show();
Note how the drawing is done in paint. This applet works just fine for me.
The difference is that I'm trying to use the BufferedImage to get my Graphics2D object where as this one gets it from paint (casts Graphics to Graphics2D).
This applet works just fine, but if you try to use the Graphics2D that comes back from the BufferedImage, it doesn't work!.
For example, if I create a member variable:
Graphics2D big;
And then in paint do this:
//Graphics2D g2 = (Graphics2D) g;
Grahics2D g2 = big;
It no longer works!
So, it looks like I need to use something other than the
BufferedImage.createGraphics() to get the Graphics2D object I need.
Does this seem right?
Thanks!

How to draw cut the rope style box

Hi. I was wondering how to draw a cut the rope style box.
What I mean is how to they get that look. Is there a texture overlay? I suppose there is some blurring too.
https://www.google.es/search?q=cut+the+box+menu&espv=2&biw=1242&bih=641&source=lnms&tbm=is ch&sa=X&ei=xf2kVOG2D8P3UqLjg9A…

Hi.
Yeah sorry.
Cut the rope is a popular game app available on the app store or google play. That's why I left the link.
The menu is made up of boxes. Each box has a pattern.
With the following link you can see the texture even more closely. It is the green rectangle image at the top with green circles etc...
Complete Guide to all Cut the Rope Drawings

How to draw horizontal line in smartform after end of the all line items

Hi Friends,
I am working on the smartform. I have created TABLE node in Main window.
i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
Could you please help me how to resolve this issue.
FYI: I tried with the below two options. But no use.
1. desinged footer area in the table node of the main window.
2. tried with uline and system symbols.
please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
this is very urgent.
Thanks in advance
Regards
Raghu

Hello Valter Oliveira,
Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
Could you please tell me how to insert blank line text.
1 - in your table, create a line type with only one column, with the same width of the table
2 - in table painter, create a line under the line type
3 - insert a blank line text in the footer section with the line type you have created.

How to draw text vertically, or in an angle

please help me how to draw text vertically, or in an angle

I robbed the framework from Dr Las or 74phillip (don't remember which) ...
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class AngleText extends JPanel {
private int      degrees = 16;
private JSpinner degreesSpinner;
public AngleText () {
    setBackground ( Color.WHITE );
} // AngleText constructor
protected void paintComponent ( Graphics _g ) {
    super.paintComponent ( _g );
    Graphics2D g = (Graphics2D)_g;
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON );
    AffineTransform at = AffineTransform.getRotateInstance ( Math.toRadians ( degrees ) );
    Font f = g.getFont();
    g.setFont ( f.deriveFont ( at ) );
    g.drawString ( "Rotating Text!", getWidth()/2, getHeight()/2 );
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_OFF );
} // paintComponent
public JPanel getUIPanel () {
    SpinnerModel degreesModel = new SpinnerNumberModel (
                                  degrees // initial
                                 ,0        // min
                                 ,360      // max
                                 ,2        // step
    degreesSpinner = new JSpinner ( degreesModel );
    degreesSpinner.addChangeListener ( new DegreesTracker() );
    JPanel panel = new JPanel();
    panel.add ( degreesSpinner );
    return panel;
} // getUIPanel
// DegreesTracker
private class DegreesTracker implements ChangeListener {
    public void stateChanged ( ChangeEvent e ) {
      Integer i = (Integer)((JSpinner)e.getSource()).getValue();
      degrees   = i.intValue ();
      repaint();
} // DegreesTracker
// main
public static void main ( String[] args ) {
    JFrame f = new JFrame ( "AngleText" );
    f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
    AngleText app = new AngleText();
    f.getContentPane().add ( app );
    f.getContentPane().add ( app.getUIPanel(), BorderLayout.SOUTH );
    f.setSize ( 200, 200 );
    f.setVisible ( true );
} // main
} // AngleText

How to draw vertical lines in SMART FORMS

Hi Guys,
Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
thanks,
Ramesh

Hi Ramesh,
In the window output options you have option of check box to get lines.
Then you need to give the spacing for vertical and horizontal.
Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
Put the cursor on the WINDOW in which the lines you want.
Right click on it>create>complex section.
In that select the TEMPLATE radio button.
Goto TAB TEMPLATE.
Name: give some name of line.
From: From coloumn.
To: To coloumn
Height: specify the height of the line.
Next give the coloumn widths.
Like this you can draw the vertical and horzontal lines.
If the above option doesnot workout then u can try the below option also
any how you can draw vertical and horizontal lines using Template and Table.
for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
if this helps, reward with points.
Regards,
Naveen

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that ! Do you get the idea ? Thanks !

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that !
Do you get the idea ?
Thanks ever so much !

the numbers manual can be downlaoded from this website under the Apple support area...
http://support.apple.com/manuals/#numbers
What your looking for is written out step by step for drop downs and all other special types of user input starting around page 96 in the '09 manual.
Jason

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

How to draw table in layout in module pool

how to draw table in layout in module pool with wizard or table control

Hi
Goto Screen Painter .
here we can create table in 2 ways,
with wizard and without wizard.
with wizard it will step by step...
for without wizard (its quite easy)
Click Table control and Drag into ur screen.
then --> click input box and place into to that table control
for two column do this two times.
then for header click the text icon in left side and drag into
correspoding places .. then ur table is ready..
then give names using double clicking the elements
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Reward if useful.

I need to map my garden. I need to draw it to scale and locate plants ties to a list of plants.

I need to map my garden. I need to draw it to scale and locate plants that ties to a list of plant names.

A quick google search for gardening apps gave a surprisingly large number of hits. I saw at least three distinct garden planner apps (from $2 to $10) without half trying. These are mostly for iOS - iPad and/or iPhone - though there may be equivalents for Mac OS.
I suggest you hit the app store and start doing some searches. I suspect you'll find something appealing fairly quickly.

How to Draw 3-D scatter plot in J2ME?

HI all
I am new in J2ME And I need to draw a three dimensional scatter plot in J2ME application. Can any body help me how to do so? It's urgent and I am eagerly waiting for your response. Even if you can tell me how to draw a 3-D point like (x,y,z)=(3,5,8) in J2ME?

I've removed the thread you started in the Java3D forum.
db

How to draw 2D shapes on the image generated by JMF MediaPlayer?

Hello all:
IS there any way that we can draw 2D shapes on the image generated by JMF
MediaPlayer?
I am currently working on a project which should draw 2D shapes(rectangle, circle etc) to
mark the interesting part of image generated by JMF MediaPlayer.
The software is supposed to work as follows:
1> first use will open a mpg file and use JMF MediaPlayer to play this video
2> if the user finds some interesting image on the video, he will pause the video
and draw a circle to mark the interesting part on that image.
I know how to draw a 2D shapes on JPanel, however, I have no idea how I can
draw them on the Mediaplayer Screen.
What technique I should learn to implement this software?
any comments are welcome.
thank you
-Daniel

If anyone can help?!
thank you
-Daniel

How can I move and scale my photos

How can I move and scale my photos so that I can use them for wallpaper? After update, I'm no longer able to do this as much as I need to. They just pop back to their original size or larger.

You will either need to turn Settings > General > Accessibility > Reduce Motion 'on', or create a higher resolution versions of your images
From http://support.apple.com/kb/HT5595 :
When the parallax effect is on, you may notice the following:
Wallpaper, icons, and alerts shift slightly as you move your phone.
When you set a wallpaper in Settings > Wallpapers & Brightness, the photo or image will be slightly zoomed and can't be scaled to fit the screen.
If you zoom in, you will need to rescale your wallpaper to fit to the screen. You can't rescale certain photo formats, including landscape or square images.

How to draw texture NO SCALE in OpenGLES????

Similar Messages

Maybe you are looking for